Cellulose I nanocrystals (CNCs I) prepared in mildly acidic lithium bromide trihydrate (MALBTH) and their application for stabilizing Pickering emulsions

Anti-Alzheimer Drug Delivery via Pickering Emulsions Stabilized by Plate-like Cellulose Nanocrystals

In this work, we studied for the first time the formation of olive oil emulsions in water stabilized by plate-like nanocrystals with the supramolecular structure of cellulose II (pCNC). Effects of storage, pCNC concentration, and NaCl on the stability and properties of Pickering emulsions, including the creaming index, droplet size, zeta potential, acid-base surface properties, and rheology, were studied. A significant influence of the shape of nanoparticles (compared to the classical rod-like shape) on the stability parameters and rheological characteristics of emulsions is shown. Plate-like cellulose nanocrystals at a concentration of 16 g/L are able to form delamination-resistant emulsions without added electrolytes. The viscosity of pCNC-stabilized emulsions tends to decrease with increasing electrolyte concentration in the system, which is not characteristic of rod-like CNC-stabilized emulsions. This effect in pCNC-stabilized emulsions assumedly can be associated both with weak mechanical engagement between drops due to the shape of stabilizer particles and with an insignificant participation of background electrolyte cations in the formation of interdroplet interactions. Therefore, the resulting aggregates are unstable and easily destroyed, even under weak mechanical stress. As a consequence, the acid-base properties of the pCNC surface are practically independent of the emulsion preparation method (with or without electrolyte) as well as the concentration of the background electrolyte. The reduced viscosity of pCNC-stabilized emulsions in the presence of an electrolyte, coupled with the absence of acute toxicity, allows us to recommend them as a convenient oral delivery system for fat-soluble, biologically active substances. Our emulsions carrying donepezil (an anti-Alzheimer drug) showed better performance than a solution of donepezil hydrochloride in preventing memory impairment tested on laboratory mice.

Biopolymer-Based Nanosystems: Potential Novel Carriers for Kidney Drug Delivery

Kidney disease has become a serious public health problem throughout the world, and its treatment and management constitute a huge global economic burden. Currently, the main clinical treatments are not sufficient to cure kidney diseases. During its development, nanotechnology has shown unprecedented potential for application to kidney diseases. However, nanotechnology has disadvantages such as high cost and poor bioavailability. In contrast, biopolymers are not only widely available but also highly bioavailable. Therefore, biopolymer-based nanosystems offer new promising solutions for the treatment of kidney diseases. This paper reviews the biopolymer-based nanosystems that have been used for renal diseases and describes strategies for the specific, targeted delivery of drugs to the kidney as well as the physicochemical properties of the nanoparticles that affect the targeting success.

Removing of cationic dyes using self-cleaning membranes-based PVC/nano-cellulose combined with titanium aluminate

This research used the phase inversion approach to construct polyvinyl chloride nanocellulose@titanium aluminate nanocomposite membranes (PVC/NC@TALCM) to adsorb and filter dye from wastewater. FTIR, XRD, and SEM were used to determine the adsorptive nanocomposite membrane that had been synthesized. The thermal and electrical properties measurements were carried out using a static system. The influence of several adsorbent dosages, pH, and dye concentrations on the nanocomposite membrane's adsorption ability was investigated. Using a dead-end filtration system, the PVC-NC@TALCM was evaluated as a pressure filtration membrane system. It was found that 98.6% of MB dye was removed by PVC-NC@TALCM membrane, which was loaded with 5% titanium aluminate at pH 10. The kinetic adsorption studies indicated that the adsorption of MB onto the PVC-NC@TALCM nanocomposite membrane obeys pseudo-second-order that indicates the chemosorption process. The isotherm data were described using Freundlich and Langmuir models, and the Freundlich isotherms were shown to be more closely match the experimental data than the Langmuir model. Finally, the PVC-NC@TALCM nanocomposite membrane was economical, environmentally friendly, and self-cleaning.

Challenges associated with cellulose composite material: Facet engineering and prospective

Cellulose is the most abundant polysaccharide on earth. It has a large number of desirable properties. Its low toxicity makes it more useful for a variety of applications. Nowadays, its composites are used in most engineering fields. Composite consists of a polymer matrix and use as a reinforcing material. By reducing the cost of traditional fibers, it has an increasing demand for environment-friendly purposes. The use of these types of composites is inherent in moisture absorption with hindered natural fibers. This determines the reduction of polymer composite material. By appropriate chemical surface treatment of cellulose composite materials, the effect could be diminished. The most modern and advanced techniques and methods for the preparation of cellulose and polymer composites are discussed here. Cellulosic composites show a reinforcing effect on the polymer matrix as pointed out by mechanical characterization. Researchers tried their hard work to study different ways of converting various agricultural by-products into useful eco-friendly polymer composites for sustainable production. Cellulose plays building blocks, that are critical for polymer products and their engineering applications. The most common method used to prepare composites is in-situ polymerization. This help to increase the yields of cellulosic composites with a significant enhancement in thermal stability and mechanical properties. Recently, cellulose composites used as enhancing the incorporation of inorganic materials in multi-functional properties. Furthermore, we have summarized in this review the potential applications of cellulose composites in different fields like packaging, aerogels, hydrogels, and fibers.

Preparation of Spherical Cellulose Nanocrystals from Microcrystalline Cellulose by Mixed Acid Hydrolysis with Different Pretreatment Routes

Spherical cellulose nanocrystal (CNC), as a high value cellulose derivative, shows an excellent application potential in biomedicine, food packaging, energy storage, and many other fields due to its special structure. CNC is usually prepared by the mixed acid hydrolysis method from numerous cellulose raw materials. However, the pretreatment route in preparing spherical CNC from cellulose fiber is still used when choosing microcrystalline cellulose (MCC) as the raw material, which is not rigorous and economical. In this work, pretreatment effects on the properties of spherical CNC produced from MCC by mixed acid hydrolysis were systematically studied. Firstly, the necessity of the swelling process in pretreatment was examined. Secondly, the form effects of pretreated MCC (slurry or powder form) before acid hydrolysis in the preparation of spherical CNC were carefully investigated. The results show that the swelling process is not indispensable. Furthermore, the form of pretreated MCC also has a certain influence on the morphology, crystallinity, and thermal stability of spherical CNC. Thus, spherical CNC with different properties can be economically prepared from MCC by selecting different pretreatment routes through mixed acid hydrolysis.

Stabilization of Pickering emulsions via synergistic interfacial interactions between cellulose nanofibrils and nanocrystals

Nanocellulose is a promising stabilizer for industrial emulsions that offers the advantages of sustainability, biodegradability and nontoxicity. Emulsions prepared using cellulose nanofibrils (CNF) and nanocrystals (CNCs) in mildly acidic lithium bromide trihydrate (MALBTH) were characterized in this study. At fixed CNCs concentration (0.3 wt%), increasing the CNF content from 0 to 0.9 wt% clearly influenced the stability and microstructure of Pickering emulsions. The Oil droplets size decreased and stabilized with increasing CNF loading. This emulsification behavior was attributed to the irreversible adsorption of CNCs on the surface of the oil droplets and the formation of a dense CNF network in the aqueous phase, thereby improving the emulsion stability. The universal applicability of the proposed method was verified using cyclohexane and edible olive oil as oil phases. Overall, this study may provide a novel means of producing all-natural, low-oil, food-grade emulsions with adjustable stability.