Chemical modifications in the structure of marine polysaccharide as serviceable food processing and preservation assistant: A review

Use of ozone oxidation in combination with deacetylation for improving the structure and gelation properties of konjac glucomannan

In this study, oxidized deacetylated konjac glucomannans with different degrees of oxidation were prepared by a combination of deacetylation and ozone oxidation. Carboxyl groups were found to be introduced into the modified konjac glucomannan while acetyl groups were removed. The backbone, branched chains, and crystal structure of modified konjac glucomannan were not significantly affected. The whiteness was enhanced to 97-99 % and the thermal degradation temperature was up to 250 °C after modification. The solubility of the modified konjac glucomannan (oxidized for 60 min) was significantly increased to 84.56 % (p < 0.05), while its viscosity and swelling power were notably decreased owing to the changes in molecular weight (from 106 to 104) and functional groups. Rheological analysis showed that oxidized deacetylated konjac glucomannan has the ability to form soft-textured gels and the potential to develop dysphagia foods. Future studies should focus on the gelation mechanisms of oxidized deacetylated konjac glucomannan.

Properties of modified chitosan-based films and coatings and their application in the preservation of edible mushrooms: A review

Edible mushrooms are prone to deteriorate during storage. A Single chitosan film or coating has limitations in preservation. Therefore, this article focused on the improvement of modified chitosan-based films and coatings on properties related to storage quality of edible mushrooms (e.g.: safety, barrier, mechanical, antioxidant and antibacterial properties). Besides, the application of chitosan-based materials in the preservation of mushrooms was also discussed. The modified chitosan film and coating can slow down the respiration of mushrooms, inhibit the growth of microorganisms, protect antioxidant compositions, and regulate the activity of related enzymes, thus improving the quality and prolonging the shelf life of mushrooms. Meanwhile, the added ingredients improve the water and gas barrier properties of chitosan through volume and group occupation, and reduce the light transmittance of chitosan through light transmission, scattering and absorption. Essential oils and polyphenolic compounds had a better enhancement of antioxidant and antimicrobial properties of chitosan.

Modified chitosan with different phenolic acids: Characterization, physicochemical properties, and biological activity

This study synthesized five phenolic acid-chitosan copolymers utilizing the carbodiimide-mediated chemical crosslinking reaction. Comprehensive evaluations were conducted on their structural attributes, physicochemical properties, and biological activities. Fourier transform infrared confirmed successful grafting of phenolic acids onto chitosan via amide linkages. Additionally, ultraviolet-visible absorption spectroscopy and proton nuclear magnetic resonance analyses revealed novel absorption peaks between 200 and 400 nm and 6.0-8.0 ppm, respectively, attributable to the incorporated phenolic acids. Notably, the chitosan-gentisate acid copolymer exhibited significantly enhanced biological activity (p < 0.05) compared to pure chitosan and the other four conjugates, attributed to its highest grafting degree of approximately 295.93 mg/g. These modified chitosan derivatives effectively preserved the quality of sea bass (Lateolabrax japonicus) during refrigerated storage, extending its shelf-life by up to 9 days, 7 days, and 4 days relative to control, chitosan, and gentisate acid groups.

Recent trends in bone tissue engineering: a review of materials, methods, and structures

Bone tissue engineering (BTE) provides the treatment possibility for segmental long bone defects that are currently an orthopedic dilemma. This review explains different strategies, from biological, material, and preparation points of view, such as using different stem cells, ceramics, and metals, and their corresponding properties for BTE applications. In addition, factors such as porosity, surface chemistry, hydrophilicity and degradation behavior that affect scaffold success are introduced. Besides, the most widely used production methods that result in porous materials are discussed. Gene delivery and secretome-based therapies are also introduced as a new generation of therapies. This review outlines the positive results and important limitations remaining in the clinical application of novel BTE materials and methods for segmental defects.

Natural polysaccharides and proteins-based films for potential food packaging and mulch applications: A review

Conventional nondegradable packaging and mulch films, after reaching the end of their use, become a major source of waste and are primarily disposed of in landfills. Accumulation of non-degradable film residues in the soil leads to diminished soil fertility, reduced crop yield, and can potentially affect humans. Application of degradable films is still limited due to the high cost, poor mechanical, and gas barrier properties of current biobased synthetic polymers. In this respect, natural polysaccharides and proteins can offer potential solutions. Having versatile functional groups, three-dimensional network structures, biodegradability, ease of processing, and the potential for surface modifications make polysaccharides and proteins excellent candidates for quality films. Besides, their low-cost availability as industrial waste/byproducts makes them cost-effective alternatives. This review paper covers the performance properties, cost assessment, and in-depth analysis of macromolecular structures of some natural polysaccharides and proteins-based films that have great potential for packaging and mulch applications. Proper dissolution of biopolymers to improve molecular interactions and entanglement, and establishment of crosslinkages to form an ordered and cohesive polymeric structure can help to obtain films with good properties. Simple aqueous-based film formulation techniques and utilization of waste/byproducts can stimulate the adoption of affordable biobased films on a large-scale.

Optimization and evaluation of Atrina pectinata polysaccharides recovered by subcritical water extraction: A promising path to natural products

In this study, the recovery of Atrina pectinata posterior adductor polysaccharides (APP-PS) using subcritical water extraction (SWE) was optimized by response surface methodology (RSM) and the physicochemical and biological properties of the recovered APP-PS were evaluated. The optimal extraction conditions, which resulted in a maximum yield of 55.58 ± 1.12 %, were temperature, 152.08 °C; extraction time, 10 min; solid-liquid ratio, 30 g/600 mL. The obtained APP-PS was found to be 88.05 ± 0.17 % total sugar. Fourier transform infrared (FT-IR) and Nuclear magnetic resonance (NMR) analyses confirmed the presence of the α-coordination of D-glucan in the polymer sample. The analysis of monosaccharide composition, along with thermogravimetric analysis, revealed the typical structure of the sample, composed of glucose alone. Total phenolic contents of APP-PS were measured as 5.47 ± 0.01 mg Gallic acid/g of dry sample and total flavonoids contents were determined to be 0.78 ± 0.06 mg Quercetin/g of dry sample. For biological activities, ABTS+, DPPH and FRAP antioxidant activities were measured to be 20.00 ± 0.71, 2.35 ± 0.05 and 4.02 ± 0.07 μg Trolox equivalent/100 g of dry sample, respectively. Additionally ACE inhibitory was confirmed to be 87.02 ± 0.47 %. These results showed that SWE is an effective method to recover biofunctional materials from marine organisms.

Chitosan-alginate sponge with multiple cross-linking networks for adsorption of anionic dyes: Preparation, property evaluation, mechanism exploration, and application

A chitosan-alginate sponge (CAS) with multiple cross-linking networks was developed using chitosan, sodium alginate, polyvinyl alcohol, and glutaraldehyde to adsorb and enrich the anionic dyes form the food samples. The multiple networks in CAS refer to the electrostatic cross-linking network, hydrogen bonding cross-linking network, and covalent cross-linking network. Compared with pure chitosan and alginate sponges, the CAS showed better three-dimensional network structure, mechanical behavior, and stability, which is benefit by multiple cross-linking networks. The physical and chemical properties of CAS were systematically studied by a series of characterizations. The adsorption performance of CAS on anionic dyes was inspected with different dye concentration, time, temperature, and pH conditions. CAS exhibited a good and stable adsorption property to amaranth, carmine, and sunset yellow with the saturation adsorption capacity of 94.34, 111.5, and 80.05 mg∙g-1, respectively. Furthermore, CAS performed outstanding selectivity to anionic dyes with the selectivity factor up to 16.99. Through electrostatic potential analysis, it is inferred that CAS mainly adsorbs anionic dyes through electrostatic interactions. CAS showed satisfactory reusability, maintaining 97 %-99 % of adsorption performance after six cycles of recycling. Finally, CAS was combined with high-performance liquid chromatography for the enrichment and detection of anionic dyes in candy and cocktail samples, achieving the enrichment factor up to 84.77.

Phenolic acid-chitosan derivatives: An effective strategy to cope with food preservation problems

Chitosan, a cost-effective and eco-friendly natural polymeric material, possesses excellent film-forming properties. However, it has low solubility and biological activity, which hinders its widespread applications. To overcome these limitations, researchers have developed phenolic acid-chitosan derivatives that greatly enhance the mechanical, antibacterial and antioxidant properties of chitosan, expanding its potential application, particularly in food preservation. This review aims to provide an in-depth understanding of the structure and biological activity of chitosan and phenolic acid, as well as various synthetic techniques employed in their modification. Phenolic acid-chitosan derivatives exhibit improved physicochemical properties, such as enhanced water solubility, thermal stability, rheological properties, and crystallinity, through grafting techniques. Moreover, these derivatives demonstrate significantly enhanced antibacterial and antioxidant activities. Through graft modification, phenolic acid-chitosan derivatives offer promising applications in food preservation for diverse food products, including fruits, vegetables, meat, and aquatic products. Their ability to improve the preservation and quality of these food items makes them an appealing option for the food industry. This review intends to provide a deeper understanding of phenolic acid-chitosan derivatives by delving into their synthetic technology, characterization, and application in the realm of food preservation.

Bio-based active packaging: Gallic acid modified agarose coatings in grass carp (Ctenopharyngodon idellus) preservation

Antioxidant and antimicrobial agarose coatings were developed by grafting gallic acid through the carbodiimide coupling method. Structural characterization revealed that the carboxyl group of gallic acid was successfully grafted onto the C6-OH of D-galactose in agarose, with the highest observed grafting ratio being 13.73 %. The grafting of gallic acid significantly increased the antioxidant and bacteriostatic activities of the agarose. As the grafting ratio of gallic acid-modified agarose (GaAg) increased from 0 to 13.73 %, the scavenging ratio of DPPH and the inhibition ratio of β-carotene bleaching were observed to increase from 0 % to 65.92 % and 6.89 % to 73.46 %, respectively. GaAg exhibited up to 100 % inhibition of Escherichia coli and Staphylococcus aureus. The physicochemical properties of gel strength, viscosity, gelling temperature and melting temperature decreased to 971.3 g/cm2, 17.9 mPa·s, 31.7 °C and 84.1 °C, respectively. The gel contact angle was increased from 22.1° to 73.6°. Fish preservation tests have demonstrated that it effectively inhibited bacterial growth, prevented fat oxidation, blocked light, reduced moisture loss, and enhanced the overall quality of grass carp (Ctenopharyngodon idellus) fillets during refrigeration, which was more effective than native agarose in extending the shelf life of fish. Therefore, GaAg holds promise as an aquatic product preservative.

Preparation, structures, and biological functions of rhamnan sulfate from green seaweed of the genus Monostroma: A review

Rhamnan sulfate, a rhamnose-rich sulfated polysaccharide, is present in the cell walls of green seaweed belonging to the genus Monostroma. This macromolecule demonstrates promising therapeutic properties, including anti-coagulant, thrombolytic, anti-viral, anti-obesity, and anti-inflammatory activities, which hold potential applications in food and medical industries. However, rhamnan sulfate has not garnered as much attention from researchers as other seaweed polysaccharides, including alginate, carrageenan, and fucoidan. This review discusses the extraction and purification techniques of rhamnan sulfate, delves into its chemical structures and related elucidation approaches, and provides an overview of its biological functions. Future research should focus on the structure-activity relationship of rhamnan sulfate and the industrial preparation of rhamnan sulfate with a specific homogeneous structure to facilitate its practical applications.

Mapping the Acetylamino and Carboxyl Groups on Glycans by Engineered α-Hemolysin Nanopores

Glycan is a crucial class of biological macromolecules with important biological functions. Functional groups determine the chemical properties of glycans, which further affect their biological activities. However, the structural complexity of glycans has set a technical hurdle for their direct identification. Nanopores have emerged as highly sensitive biosensors that are capable of detecting and characterizing various analytes. Here, we identified the functional groups on glycans with a designed α-hemolysin nanopore containing arginine mutations (M113R), which is specifically sensitive to glycans with acetamido and carboxyl groups. Molecular dynamics simulations indicated that the acetamido and carboxyl groups of the glycans produce unique electrical signatures by forming polar and electrostatic interactions with the M113R nanopores. Using these electrical features as the fingerprints, we mapped the length of the glycans containing acetamido and carboxyl groups at the monosaccharide, disaccharide, and trisaccharide levels. This proof-of-concept study provides a promising foundation for developing single-molecule glycan fingerprinting libraries and demonstrates the capability of biological nanopores in glycan sequencing.

Alginate-based materials for enzyme encapsulation

Enzymes are widely used in industry due to their high efficiency and selectivity. However, their low stability during certain industrial processes can result in a significant loss of catalytic activity. Encapsulation is a promising technique that can stabilize enzymes by protecting them from environmental stresses such as extreme temperature and pH, mechanical force, organic solvents, and proteases. Alginate and alginate-based materials have emerged as effective carriers for enzyme encapsulation due to their biocompatibility, biodegradability, and ability to form gel beads through ionic gelation. This review presents various alginate-based encapsulation systems for enzyme stabilization and explores their applications in different industries. We discuss the preparation methods of alginate encapsulated enzymes and analyze the release mechanisms of enzymes from alginate materials. Additionally, we summarize the characterization techniques used for enzyme-alginate composites. This review provides insights into the use of alginate encapsulation as a means of stabilizing enzymes and highlights the potential benefits for various industrial applications.

Crystallization inhibitory effects of konjac glucomannan, sodium alginate and xanthan gum on curcumin in supersaturated solution

Supersaturating drug delivery system (SDDS) is a promising approach to enhance the solubility of hydrophobic functional components. However, SDDS is thermodynamically unstable and crystallization tends to occur. In this work, curcumin was used as a model compound, and the crystallization inhibitory effect of konjac glucomannan (KGM), sodium alginate (SA) and xanthan gum (XTG) on curcumin in supersaturated solution was investigated. Amorphous solubility of curcumin was determined using ultraviolet extinction, fluorescence spectroscopy and dynamic light scattering methods. Nucleation induction time (NIT) and crystal growth rate of curcumin were evaluated using ultraviolet probe in the absence and presence of various natural polysaccharides (NPs). Results showed that amorphous solubility of curcumin was approximately 30 μg/mL in pH 6.8 phosphate buffer. NPs used in this work restrained nucleation or crystal growth of curcumin effectively. The NITs of curcumin in the absence of NPs and in the presence of XTG, KGM and SA (1 μg/mL) were 3.7, 60.7, 20.0 and 8.0 min, respectively. The crystal growth rate of curcumin in the absence of NPs and in the presence of XTG, SA and KGM (1 μg/mL) were 0.0103, 0.00752, 0.00286 and 0.000306 min^-1, respectively. The nucleation inhibitory effect of NPs on curcumin was ranked as XTG > KGM > SA. The order of crystal growth inhibition capacity of NPs was KGM > SA > XTG. In conclusion, NPs could be incorporated into SDDS to maintain supersaturation of hydrophobic components for enhanced bioavailability.

Regulation strategy, bioactivity, and physical property of plant and microbial polysaccharides based on molecular weight

Structural features affect the bioactivity, physical property, and application of plant and microbial polysaccharides. However, an indistinct structure-function relationship limits the production, preparation, and utilization of plant and microbial polysaccharides. Molecular weight is an easily regulated structural feature that affects the bioactivity and physical property of plant and microbial polysaccharides, and plant and microbial polysaccharides with a specific molecular weight are important for exerting their bioactivity and physical property. Therefore, this review summarized the regulation strategies of molecular weight via metabolic regulation; physical, chemical, and enzymic degradations; and the influence of molecular weight on the bioactivity and physical property of plant and microbial polysaccharides. Moreover, further problems and suggestions must be paid attention to during regulation, and the molecular weight of plant and microbial polysaccharides must be analyzed. The present work will promote the production, preparation, utilization, and investigation of the structure-function relationship of plant and microbial polysaccharides based on their molecular weight.

Extraction, Modification and Biomedical Application of Agarose Hydrogels: A Review

Numerous compounds present in the ocean are contributing to the development of the biomedical field. Agarose, a polysaccharide derived from marine red algae, plays a vital role in biomedical applications because of its reversible temperature-sensitive gelling behavior, excellent mechanical properties, and high biological activity. Natural agarose hydrogel has a single structural composition that prevents it from adapting to complex biological environments. Therefore, agarose can be developed into different forms through physical, biological, and chemical modifications, enabling it to perform optimally in different environments. Agarose biomaterials are being increasingly used for isolation, purification, drug delivery, and tissue engineering, but most are still far from clinical approval. This review classifies and discusses the preparation, modification, and biomedical applications of agarose, focusing on its applications in isolation and purification, wound dressings, drug delivery, tissue engineering, and 3D printing. In addition, it attempts to address the opportunities and challenges associated with the future development of agarose-based biomaterials in the biomedical field. It should help to rationalize the selection of the most suitable functionalized agarose hydrogels for specific applications in the biomedical industry.

A novel galactoxylan derived from Viola diffusa alleviates LPS-induced acute lung injury via antagonizing P-selectin-mediated adhesion function

Acute lung injury (ALI) greatly threatens human health worldwide. P-selectin is a potential target for the treatment of acute inflammatory diseases, and natural polysaccharides exhibit high-affinity for P-selectin. Viola diffusa, a traditional Chinese herbal, shows strong anti-inflammatory effects, but pharmacodynamic substances and underlying mechanisms are still unclear. In this study, a galactoxylan polysaccharide (VDPS) derived from Viola diffusa was isolated and characterized, evaluated the protective effect on LPS induced ALI and underlying mechanism. VDPS significantly alleviated LPS-induced pathological lung injury, and decreased the numbers of total cells and neutrophils as well as the total protein contents in the bronchoalveolar lavage fluid (BALF). Moreover, VDPS reduced proinflammatory cytokine production both in BALF and lung. Interestingly, VDPS significantly restrained the activation of NF-κB signaling in the lung of LPS-exposed mice, but it cannot inhibit LPS-induced inflammation in human pulmonary microvascular endothelial cells (HPMECs) in vitro. Additionally, VDPS disrupted neutrophil adhesion and rolling on the activated HPMECs. VDPS cannot impact the expression or cytomembrane translocation of endothelial P-selectin, but remarkably interrupt the binding of P-selectin and PSGL-1. Overall, this study demonstrated that VDPS can alleviate LPS-induced ALI via inhibiting P-selectin-dependent adhesion and recruitment of neutrophils on the activated endothelium, providing a potential treatment strategy for ALI.