Sodium alginate-based gel electrodes without binder for high-performance supercapacitors

A novel DES-enhanced sodium alginate-based conductive organohydrogel fiber for high-performance wearable sensors

Conductive organohydrogel fibers based on sodium alginate (SA) exhibit remarkable flexibility and electrical conductivity, making them ideal candidates for conformal skin adhesion and real-time monitoring of human activity signals. However, traditional conductive hydrogels often suffer from issues such as uneven distribution of conductive fillers, and achieving the integration of high mechanical strength, stretchability, and transparency using environmentally friendly methods remains a significant challenge. In this study, a novel and sustainable strategy was developed to fabricate dual-network organohydrogel fibers using sodium alginate as the primary material. By incorporating a deep eutectic solvent (DES) composed of choline chloride and glycerol into the SA matrix through wet spinning, the mechanical properties of the hydrogel were significantly enhanced, achieving an elongation at break of 817 % and a tensile strength of 5.12 MPa. The resulting fibers exhibit stable electrical conductivity and outstanding performance as wearable sensors, enabling accurate and reliable real-time monitoring of diverse human activities. This innovative approach highlights the potential of SA-based conductive hydrogels for multifunctional sensing applications. By addressing the limitations of traditional hydrogels and leveraging the biocompatibility and scalability of SA, this method opens new avenues for advanced wearable electronics and biomedical devices that are sustainable, durable, and versatile.

Ultra-Low Alginate-Based Multifunctional Composite Binders for Enhanced Mechanical, Electrochemical, and Thermal Performance of Li-S Batteries

The practical application of Li-S batteries, which hold great potential as energy storage devices, is impeded by various challenges, such as capacity degradation caused volume change, polysulfide shuttling, poor electrode kinetics, and safety concerns. Binder plays a crucial role in suppressing volume change of cathode side, thereby enhancing the electrochemical performance of Li-S batteries. In this research, a novel network binder (SA-Co-PEDOT) composed of sodium alginate is presented, Co2+ ions as cross-linking agent and PEDOT as an electronic conductor. The theoretical analysis and experimental testing confirm that the SA-Co-PEDOT binder with synergistic combination of catalytic center and electron transfer network effectively mitigates large volumetric changes during cycling while simultaneously enhancing electrode kinetics through controlling the deposition morphology of sulfur end product and its nucleation and dissolution. As a result, it achieves a capacity of 844 mAh g-1 after 150 cycles at 0.2 C. Moreover, the electrode with SA-Co-PEDOT binder subjected a bending test maintains a capacity of 395 mAh g-1 after 500 cycles at 0.5 C, exhibiting an impressively low decay rate of only 0.11%. Even with an ultra-low content of 2 wt.% SA-Co-PEDOT binder, the electrode still maintains a capacity of 999.7 mAh g-1 after 100 cycles at 0.5 C.

Sodium lignosulfonate/graphene composites for efficient desalination by incorporating CoS to control pore size

The phenomenon of overlapping double layers due to micropores inhibits capacitive deionization performance, which is improved by increasing the pore size. In this study, a novel ternary composite electrode (sodium lignosulfonate/reduced graphene oxide/cobalt sulfide, LGC) was designed using a two-step hydrothermal method. CoS with high pseudocapacitance modifies sodium lignosulfonate and graphene connected by hydrogen bonding, benefiting from the constitutive steric structure. The electrochemical performance was significantly enhanced, and the desalination capacity substantially improved. The LGC electrode specific capacitance was as high as 354.47 F g-1 at a 1 A g-1 current density. The desalination capacity of the capacitive deionization device comprising LGC and activated carbon in 1 M NaCl electrolyte reached 28.04 mg g-1 at an operating condition of 1.2 V, 7 mL min-1. Additionally, the LGC electrodes degraded naturally post the experiment by simply removing the CoS, suggesting that the LGC composites are promising material for capacitive deionization electrodes.

Rapid fabricated in-situ polymerized lignin hydrogel sensor with highly adjustable mechanical properties

Conductive hydrogels have been widely used as sensors owing to their tissue-like properties. However, the synthesis of conductive hydrogels with highly adjustable mechanical properties and multiple functions remains difficult to achieve yet highly needed. In this study, lignin hydrogel characterized by frost resistance, UV resistance, high conductivity, and highly adjustable mechanical properties without forming by-products was prepared through a rapid in-situ polymerization of acrylic acid/zinc chloride (AA/ZnCl2) aqueous solution containing lignin extract induced by the reversible quinone-catechol redox of the ZnCl2-lignin system at room temperature. Results revealed that the PAA/ZnCl2/lignin hydrogel exhibited mechanical properties with tensile stress (ranging from 0.08 to 3.28 MPa), adhesion to multiple surfaces (up to 62.05 J m-2), excellent frost resistance (-70-20 °C), UV resistance, and conductivity (0.967 S m-1), which further endow the hydrogel as potential strain and temperature sensor with wide monitor range (0-300 %), fatigue resistance, and quick response (70 ms for 150 % strain). This study proposed and developed a green, simple, economical, and efficient processing method for a hydrogel sensor in flexible wearable devices and man-machine interaction fields.