Free-standing reduced graphene oxide/carboxymethylcellulose-polyaniline (RGO/CMC-PANI) hybrid film electrode for high-performance asymmetric supercapacitor device

Synthesis and characterization of polyaniline-based composites using cellulose nanocrystals as biological templates

Polyaniline (PANI) is considered as an ideal electrode material due to its remarkable Faradaic activity, exceptional conductivity, and ease of processing. However, the agglomeration and poor cycling stability of PANI largely limit its practical utilization in energy storage devices. To address these challenges, PANI was synthesized via a facile one-pot, two-step process using cellulose nanocrystals (CNCs) as bio-templates in this work. Zeta potential and particle size measurements revealed that the CNC template could impart improved dispersion stability to the synthesized PANI, which exhibited a decrease in average particle size from 1100 nm to 300 nm as a function of 10 % CNCs. Furthermore, the effect of CNC loadings on the performance of PANI was systematically investigated. The results showed that the specific capacitance of PANI/CNC increased from 102.52 F·g-1 to 138.12 F·g-1 with the CNC loading increase from 0 to 10 wt%. Particularly, the PANI/CNC composite film with a 1:9 ratio (C-P-10 %) demonstrated a capacity retention of 84.45 % after 6000 cycles and an outstanding conductivity of 526 S·m-1. This work generally offers an effective solution for the preparation of high-performance PANI-based composites, which might hold great promise in energy storage device applications.

Construction of wood-PANI supercapacitor with high mass loading using "pore-making, active substance-filling, densification" strategy

Wood-conducting polymer materials have been widely used as supercapacitor electrode; however, it remains challenging to achieve a simple method to improve the homogeneity of the conductive material on wood and to reach high mass loading. Herein, a novel "pore-making, active substance-filling, densification (dissolution, in-situ polymerization of polyaniline (PANI), self-shrinking)" strategy is proposed for the preparation of wood electrodes with a high mass loading (41.4 wt%) and homogeneity. Ingeniously, ZnCl2 as a dissolving agent and pore-making agent to treat delignified wood can generate more pores on the wood, which is more conducive to the penetration of aniline small molecules, besides, the dissolved fine fibers can be entangled with more PANI, which can improve the loading and homogeneity of PANI. After drying treatment, there will be shrinkage again, playing a certain physical densification effect on the large lumen. The optical electrode was RWP2 showing high electrochemical performance (2328.9 mF/cm2, 1 mA/cm2), and stability (5000 cycles, 89.3 %). Moving forward, the RWP2//RWP2 SSC showed an excellent energy density of 164.24 μwh/cm2 at a power density of 250 μw/cm2. Remarkably, the simple and versatile strategy of designing wood-based materials with high mass loading provides new research ideas for realizing multifunctional applications.

Higher specific capacitance and compressibility nanocellulose based supercapacitor hydrogel electrode assembled by efficient impregnation

The rational and effective combination of different electrochemical substances to prepare high-performance supercapacitor electrodes has been widely studied by researchers. Currently, most work focuses on polymerizing conductive polymers onto the surface of nanocellulose and carbon materials, and then preparing them into supercapacitor electrodes. This method is effective, but the process is cumbersome. Therefore, we propose a simpler and more effective method. A hydrogel was prepared by using TEMPO oxidized cellulose nanofibers (TOCNF)/multi walled carbon nanotubes (MWCNT), and then immersed in aniline and FeCI3 solutions for 24 h to obtain a hydrogel electrode. At a current density of 0.5 mA cm-2, it exhibits an area specific capacitance of 1028 mF cm-2, with a maximum strain of 58 % and a compressive stress of 150 KPa. The assembled symmetrical supercapacitor exhibits a high specific capacitance of 303 mF cm-2 at a current density of 0.5 mA cm-2. The research results indicate that the proposed method is a new feasible approach for developing supercapacitors.

Multifunctional carboxymethyl cellulose/graphene oxide/polyaniline hybrid thin film for adsorptive removal of Cu(II) and oxytetracycline antibiotic from wastewater

The antibiotics and metal ions in the contaminated water bodies must be removed using appropriate methods for sustainable development. In this study, the multifunctional carboxymethyl cellulose/graphene oxide/polyaniline (CMC/GO/PANI) hybrid thin film was synthesized and utilized for adsorptive scavenging of (Cu(II) and oxytetracycline (OTC) from wastewater. The prepared thin films' morphology, chemical compositions, functionality, and surface charge were analyzed by well-known physicochemical techniques. The adsorption process of the selected model pollutants was examined as a function of reaction time, Cu(II), and OTC solution pH, concentrations, and temperatures. Results showed that CMC/GO/PANI hybrid thin film had higher Cu(II) and OTC adsorption than CMC, GO/CMC, and PANI/CMP thin films due to the multifunctional synergetic effect. The adsorption kinetic data were fitted to the pseudo-second-order model. Redlich-Peterson isotherm model well interpreted Cu(II) and OTC scavenging equilibrium data. Energetically, the adsorption was spontaneous and endothermic for both pollutants. The multifunctional CMC/GO/PANI thin film was recycled and reused seven times during adsorption-desorption cycles. The study outcomes demonstrated that CMC/GO/PANI thin film could be reused multiple times for large-scale wastewater purification.