Zr4+ and glutaraldehyde cross-linked polyethyleneimine functionalized chitosan composite: Synthesis, characterization, Cr(VI) adsorption performance, mechanism and regeneration

Facile preparation of cucurbituril-modified magnetic chitosan microspheres for efficient removal of Cr(VI) and MB from wastewater: Adsorption experiments, statistical optimization, and mechanistic insights

In this study, a magnetic microsphere (CB/MCS) based on magnetic chitosan and cucurbituril (CB) was successfully prepared for efficient removal of methylene blue (MB 2968.6 mg/g) and hexavalent chromium (Cr(VI) 297.3 mg/g) from water. CB/MCS combined the fast magnetic separation performance of magnetic chitosan and the excellent adsorption capacity of CB to realize the efficient removal of MB and Cr(VI), and it is noteworthy that the adsorption capacity of Cr(VI) was significantly enhanced in the presence of MB. The synthesis conditions of CB/MCS were optimized by response surface methodology and Box-Behnken Design experimental design. The results of the adsorption experiments showed that the adsorption process of CB/MCS on MB and Cr(VI) conformed to the quasi-secondary kinetic model and Langmuir isotherm model, indicating that the adsorption process was mainly controlled by chemisorption and there was a strong interaction between the adsorbent and adsorbate. In addition, CB/MCS demonstrated excellent removal efficiencies in different aqueous environments, reaching 93.2 % and 91.4 % for Cr(VI) and MB, respectively, even in complex industrial wastewater. The results of the cycling experiments further confirmed the stability and reusability of CB/MCS. In summary, CB/MCS can be used as an excellent adsorbent for the removal of Cr(VI) and MB from wastewater.

Synthesis and characterization of functional chitosan-based microspheres as biodegradable yttrium-90 delivery system for radioembolization therapy

Transarterial radioembolization (TARE) using yttrium-90 (90Y)-labeled glass and resin microspheres is an emerging therapeutic technique for hepatocellular carcinoma (HCC). However, the non-biodegradability and rapid settlement of current commercial microspheres might hinder their even distribution and repetitive administration thus causing unsatisfactory therapeutic effects. In this context, novel functional chitosan-based microspheres (CPIs) that can efficiently label Y as a favorable TARE material were developed for the first time by successive grafting poly (glycidyl methacrylate) (PGMA) and iminodiacetic acid (IDA) onto chitosan microspheres (CMs). The results confirmed that the CPIs had desirable spherical shapes with average diameters of around 20.9 μm, an ideal settlement rate within 5 min, and considerable biodegradability at 10th weeks. It reached Y adsorption equilibrium within 30 min and maintained the maximum adsorption capacity up to 14.95 mg g-1 at pH 6.0 following pseudo-second-order kinetic and Langmuir models. Additionally, Y-labeled CPIs were rather stable in vitro, for which Y would firmly interact with the sodium carboxylate group and tertiary amine nitrogen atoms on IDA, and its leakage when shaken in phosphate-buffered saline for 24 h was barely detected. Altogether, these properties of the as-developed CPIs hold great potential as promising radioembolization microspheres for TARE therapy against liver cancer.

Gallic acid-functionalized chitosan composite for efficient removal of hexavalent chromium in aqueous

To address the pH limitations of traditional Cr(VI) adsorbents, converting Cr(VI) anions into the more stable Cr(III) cations through a reduction reaction is an effective strategy. Therefore, in this study, gallic acid (GA), with a high redox potential, was selected as the reducing agent, together with chitosan (CS) as the substrate, and sodium alginate (SA) as the gelling agent. A novel SCG composite material was successfully prepared using the sol-gel crosslinking method, which efficiently captured and reduced Cr(VI) while immobilizing Cr(III). At pH = 4, t = 150 min, and T = 30 °C, 1 g/L of SCG can remove 94.7 % of Cr(VI), with a reduction rate of 67.5 %, achieving efficient and stable Cr(VI) removal over a wide pH range. Furthermore, the SCG material demonstrated good pH adaptability (It can still remove 84 % of Cr(VI) at pH = 7) and practical applicability. Comparative experiments and DFT calculation results showed that the introduction of GA not only helped form a more compact network structure but also interacted synergistically with CS, significantly promoting the removal of Cr(VI). In conclusion, the SCG composite material provides a new approach for the treatment of Cr(VI)-contaminated wastewater.

Chitosan-based composite featuring dual cross-linking networks for the removal of aqueous Cr(VI)

To avoid the environmental detriment caused by Cr(VI) waste, this study constructs a dual cross-linking network structure using sodium alginate (SA) and polyvinyl alcohol (PVA). Chitosan (CS) is further introduced through electrostatic attraction and hydrogen bonding and SA/PVA/CS (SPC) composite with porous structure is successfully prepared for the removal of Cr(VI) from wastewater. Batch adsorption experiments show that SPC has excellent adsorption capacity and practical usability with a broad pH applicability range. Under optimal adsorption conditions (pH = 2, t = 150 min, T = 35 °C, m/V = 2 g/L, C0 = 10 mg/L), the Cr(VI) removal rate of SPC achieves 89.2 %. Adsorption kinetics and isotherm models indicate that the adsorption process is primarily multi-layer and chemical adsorption. Additionally, FT-IR and XPS reveal that the adsorption mechanism of SPC for Cr(VI) involves a synergy of electrostatic attraction, reduction, ion exchange and complexation. Density functional theory (DFT) simulations also confirm the dominant role of CS in the Cr(VI) adsorption. In summary, SPC shows great potential for Cr(VI) wastewater treatment.

Synthesis and characterization of three-dimensional graphene oxide-chitosan/ glutaraldehyde nanocomposites: Towards adsorption of crocin from saffron

Despite the unique properties of graphene oxide (GO) as a green adsorbent, its low structural stability presents a drawback. This study aimed to modify the properties of GO through its functionalization with chitosan (CH), cross-linked with glutaraldehyde (GLU), and synthesized via the freeze-drying method (GO-CH/GLU). Microscopic analysis illustrated that covering the GO sheets with CH and nanoparticles (NPs) resulted in a 15.8 % increase in d-spacing and a 600 % increase in sheet thickness. The GO-CH/GLU composite was utilized for the separation/purification of crocin from saffron extract under varying pH (5-9), temperature (298-318 K), stirring rate (100-300 rpm), and crocin concentration (25-200 mg/mL). The Freundlich isotherm and pseudo-second-order kinetic models provided a good fit for crocin adsorption. Thermodynamic analysis revealed that the process was endothermic, spontaneous, and physical. Optimal adsorption conditions in batch mode were pH 7, a stirring rate of 300 rpm, a temperature of 318 K, and a crocin concentration of 100 mg/mL. These conditions were applied in a continuous system, resulting in a crocin separation efficiency of 94.17 % at 180 mL/h. Additionally, HPLC data indicated that the purity of separated crocin exceeded 90 %. So, the GO-CH/GLU composite is a promising and economical adsorbent for the food industry.

Chitosan-derived N-doped carbon supported Cu/Fe co-doped MoS2 nanoparticles as peroxymonosulfate activator for efficient dyes degradation

Peroxymonosulfate (PMS), which is dominated by free radical (SO4•-) pathway, has a good removal effect on organic pollutants in complex water matrices. In this article, a new catalyst (CFM@NC) was synthesized by hydrothermal carbonization method with chitosan (CS) as N and C precursors, and used to activate PMS to degrade dye wastewater. CFM@NC/PMS system can degrade 50 mg·L-1 rhodamine B by 99.59 % within 30 min, and the degradation rate remains as high as 97.32 % after 5 cycles. It has good complex background matrices, acid-base anti-interference ability (pH 2.6-10.1), universality and reusability. It can degrade methyl orange and methylene blue by >98 % within 30 min. The high efficiency of the composite is due to the fact that CS-modified MoS2 as a carrier exposes a large number of active sites, which not only disperses CuFe2O4 nanoparticles and improves the stability of the catalyst, but also provides abundant electron rich groups, which promotes the activation of PMS and the production of reactive oxygen species (ROS). PMS is effectively activated by catalytic sites (Cu+/Cu2+, Fe2+/Fe3+, Mo4+/Mo6+, pyridine N, pyrrole N, edge sulfur and hydroxyl group) to produce a large number of radicals to attack RhB molecules, causing chromophore cleavage, ring opening, and mineralization. Among them, free radical SO4•- is the main ROS for RhB degradation. This work is expected to provide a new idea for the design and synthesis of environmentally friendly and efficient heterogeneous catalysts.

EDAC-modified chitosan/imidazolium-polysulfone composite beads for removal of Cr(VI) from aqueous solution

To enhance the stability and adsorption performance of chitosan in Cr(VI)-contaminated acidic wastewater, a novel EDAC-modified-EDTA-crosslinked chitosan derivative (CSEC) was synthesized via a one-pot method with chitosan, 1-Ethyl-3-(3-dimethylaminopropyl) carbodiimide hydrochloride (EDAC), and Na2EDTA as raw materials. To further improve the mechanical strength and separation performance of CSEC, a novel composite bead (CSEP) of CSEC and imidazolium-functionalized polysulfone (IMPSF) was prepared through a phase inversion method. The chemical composition and microstructure of CSEC and CSEP were characterized by FESEM, FTIR, NMR and XPS techniques. The maximum adsorption capacities of CSEC and CSEP for Cr(VI) were 145.96 and 135.82 mg g-1 at pH 3, respectively, and the equilibrium time for Cr(VI) adsorption by CSEC and CSEP was 5 min and 8 h, respectively. The adsorption process of Cr(VI) by both CSEC and CSEP was exothermic and spontaneous. Compared to CSEC, CSEP has significantly enhanced resistance to interference from coexisting anions. The removal mechanism of Cr(VI) by CSEP might involve redox reaction as well as electrostatic attraction between Cr(VI) oxyanions and various nitrogen cations, including protonated amino groups, guanidinium groups, protonated tertiary amine groups, and imidazolium cations. The CSEP beads have potential application value in the treatment of acidic wastewater containing Cr(VI).

Converting Waste Polyethylene Terephthalate to High Value Monomers by Synergistic Catalysts

Waste plastics accumulation, such as commonly used polyethylene terephthalate (PET), has caused serious environmental pollution and resource squander. Glycolysis is a reliable closed-loop PET recycling method, which limited by the high cost and complex catalysts preparation processes. Here we report a simple synergistic catalytic strategy by premixing zinc acetate and cheap alkalis in ethylene glycol, which could achieve complete glycolysis at 180 °C within 2 hours, and a bis(hydroxyethyl) terephthalate (BHET) yield of 86.4 %. This may be attributed to the free hydroxide ions not only enhancing the nucleophilicity of oxygen in ethylene glycol and making it easy to attack carbonyl groups, but also accelerating the swelling and dissolution of PET. Meanwhile, the in-situ generated Zn-glycolate and zinc oxide nanoparticles (ZnO NPs) activated the oxygen in the carbonyl group, making the carbon cations more electropositive. Further recycling experiments and techno-economic analysis indicated that our synergistic strategy significantly reduced industrial costs and expected to achieve large-scale industrial applications.

Recent advances in chitosan-based nanocomposites for adsorption and removal of heavy metal ions

Due to the high concentration of various toxic and dangerous pollutants, industrial effluents have imposed increasing threats. Among the various processes for wastewater treatment, adsorption is widely used due to its simplicity, good treatment efficiency, availability of a wide range of adsorbents, and cost-effectiveness. Chitosan (CS) has received great attention as a pollutant adsorbent due to its low cost and many -OH and -NH2 functional groups that can bind heavy metal ions. However, weaknesses such as sensitivity to pH, low thermal stability and low mechanical strength, limit the application of CS in wastewater treatment. The modification of these functional groups can improve its performance via cross-linking and grafting agents. The porosity and specific surface area of CS in powder form are not ideal, so physical modification of CS via integration with other materials (e.g., metal oxide, zeolite, clay, etc.) leads to the creation of composite materials with improved absorption performance. This review provides reports on the application of CS and its nanocomposites (NCs) for the removal of various heavy metal ions. Synthesis strategy, adsorption mechanism and influencing factors on sorbents for heavy metals are discussed in detail.

Chitosan derived N-doped carbon anchored Co3O4-doped MoS2 nanosheets as an efficient peroxymonosulfate activator for degradation of dyes

Peroxymonosulfate (PMS), which is dominated by non-free radical pathway, has a good removal effect on organic pollutants in complex water matrices. In this article, a biodegradable cobalt-based catalyst (Co3O4/MoS2@NCS) was synthesized by a simple hydrothermal method with chitosan (CS) as nitrogen‑carbon precursor and doped with Cobaltic‑cobaltous oxide (Co3O4) and Molybdenum disulfide (MoS2), and was used to activate PMS to degrade dye wastewater. Electrochemical tests showed that Co3O4/MoS2@NCS exhibited higher current density and cycling area than MoS2@NCS and MoS2. In the Co3O4/MoS2@NCS/PMS system, the degradation rate of 30 mg·L-1 rhodamine B (RhB) reached 97.75 % within 5 min, and kept as high as 94.34 % after 5 cycles. Its rate constant was 1.91 and 8.37 times that of MoS2@NCS/PMS and MoS2/PMS, respectively. It had good complex background matrices and acid-base anti-interference ability, and had good universality and reusability. The degradation rate of methyl orange (MO) and methylene blue (MB) were more than 91 % within 5 min at pH 4.8. The experimental results demonstrated that MoS2-modified CS as a carrier exposed a large number of active sites, which not only dispersed Co3O4 nanoparticles and improved the stability of the catalyst, but also provided abundant electron rich groups, and promoted the activation of PMS and the production of reactive oxygen species (ROS). PMS was effectively activated by catalytic sites (Co3+/Co2+, Mo4+/Mo5+/Mo6+, CO, pyridine N, pyrrole N, hydroxyl group and unsaturated sulfur), producing a large number of radicals that attack RhB molecules, causing chromophore cleavage, ring opening, and mineralization. Among them, non-free radical 1O2 was the main ROS for RhB degradation. This work is expected to provide a new idea for the design and synthesis of environmentally friendly and efficient MoS2-modified cobalt-based catalysts.

Chitosan-based foam composites for hexavalent chromium remediation: Effect of microcellulose and crosslinking agent content

Potentially toxic metal ions, such as hexavalent chromium (Cr6+), present in water concern the population's health due to their persistence, bioaccumulation potential, and high toxicity. Highly porous materials based on polysaccharides are promising technologies for metal removal due to their high surface area, biodegradability, and low toxicity. This study evaluated the effect of concentrations of microcellulose (0.5, 1, and 1.5 %) and glutaraldehyde (1, 2, and 3 %) in the adsorption capacity and mechanical properties of chitosan foams. The developed foams exhibited a three-dimensional structure with interconnected pores. Compared to foams without microcellulose, adding 1.5 % microcellulose increased up to 180 % in maximum stress supported by the foams and up to 135 % in Young's modulus. However, Cr6+ sorption capacity decreased with increasing microcellulose and crosslinking agent content due to the occupation of amino groups. Still, the foams exhibited a highly favorable sorption behavior, and the Sips isotherm model provided the best fit to the experimental data. The maximum sorption capacity reached approximately 1.4 mmol·g-1 at pH 4.0 and 25 °C. The foam structural integrity, enhanced mechanical properties, and efficient sorption capacity make them viable alternatives for environmentally friendly and cost-effective treatment of water contaminated with Cr6+ ions.

Nano‑selenium functionalized chitosan gel beads for Hg(II) removal from apple juice

The presence of potentially toxic elements and compounds poses threats to the quality and safety of fruit juices. Among these, Hg(II) is considered as one of the most poisonous heavy metals to human health. Traditional chitosan-based and selenide-based adsorbents face challenges such as poor adsorption capacity and inconvenient separation in juice applications. In this study, we prepared nano‑selenium functionalized chitosan gel beads (nanoSe@CBs) and illustrated the synergistic promotions between chitosan and nanoSe in removing Hg(II) from apple juice. The preparation conditions, adsorption behaviors, and adsorption mechanism of nanoSe@CBs were systematically investigated. The results revealed that the adsorption process was primarily controlled by chemical adsorption. At the 0.1 % dosage, the adsorbent exhibited high uptake, and the maximum adsorption capacity from the Langmuir isotherm model could reach 376.5 mg/g at room temperature. The adsorbent maintained high adsorption efficiency (> 90 %) across a wide range of Hg(II) concentrations (0.01 to 10 mg/L) and was unaffected by organic acids present in apple juice. Additionally, nanoSe@CBs showed negligible effects on the quality of apple juice. Overall, nanoSe@CBs open up possibilities to be used as a safe, low-cost and highly-efficient adsorbent for the removal of Hg(II) from juices and other liquid foods.

Recent advances in removal of inorganic anions from water by chitosan-based composites: A comprehensive review

Chitosan is a modified natural carbohydrate polymer that has been found in the exoskeletons of crustaceans (e.g., lobsters, shrimps, krill, barnacles, crayfish, etc.), mollusks (octopus, oysters, squids, snails), algae (diatoms, brown algae, green algae), insects (silkworms, beetles, scorpions), and the cell walls of fungi (such as Ascomycetes, Basidiomycetes, and Phycomycetes; for example, Aspergillus niger and Penicillium notatum). However, it is mostly acquired from marine crustaceans such as shrimp shells. Chitosan-based composites often present superior chemical, physical, and mechanical properties compared to single chitosan by incorporating the benefits of both counterparts in the nanocomposites. The tunable surface chemistry, abundant surface-active sites, facilitation synthesize and functionalization, good recyclability, and economic viability make the chitosan-based materials potential adsorbents for effective and fast removal of a broad range of inorganic anions. This article reviews the different types of inorganic anions and their effects on the environment and human health. The development of the chitosan-based composites synthesis, the various parameters like initial concentration, pH, adsorbent dosage, temperature, the mechanism of adsorption, and regeneration of adsorbents are discussed in detail. Finally, the prospects and technical challenges are emphasized to improve the performance of chitosan-based composites in actual applications on a pilot or industrial scale.

PEI-modified chitosan/activated carbon composites for Cu(II) removal from simulated pyrophosphate plating rinsing wastewater

It is a challenging task to remove heavy metal ions efficiently from the wastewater containing high concentrations of complexants. In this work, a novel PEI-modified chitosan/activated carbon composite adsorbent (PCA) was prepared and applied to the removal of Cu(II) from pyrophosphate plating rinsing wastewater. The main species of Cu(II) in the pyrophosphate wastewater was [Cu(HP2O7)2]4- or [Cu(P2O7)2]6-, which were denoted as [Cu(II)-PP] anions. The maximum adsorption capacity of PCA for Cu(II) reached 1.41 mmol g-1 under the condition of pH = 8 and molar ratio of pyrophosphate to Cu(II) = 4:1. The adsorption kinetic behavior of Cu(II) on PCA followed the Elovich model best and PCA attained adsorption equilibrium within 36 h. The thermodynamic studies showed that the adsorption process of Cu(II) by PCA was endothermic and spontaneous. The PCA fixed bed column was used to remove Cu(II) from simulated pyrophosphate plating rinsing wastewater. After three consecutive adsorption-desorption cycles, the adsorption performance, hydraulic conductivity, and mechanical stability of PCA column did not decrease. The FTIR and XPS analysis results indicated that [Cu(II)-PP] anions can be adsorbed on PCA by electrostatic attraction with protonated amine groups or coordination with the amine groups of PCA via ligand substitution.

Chitosan Hydrogels for Water Purification Applications

Chitosan-based hydrogels have gained significant attention for their potential applications in water treatment and purification due to their remarkable properties such as bioavailability, biocompatibility, biodegradability, environmental friendliness, high pollutants adsorption capacity, and water adsorption capacity. This article comprehensively reviews recent advances in chitosan-based hydrogel materials for water purification applications. The synthesis methods, structural properties, and water purification performance of chitosan-based hydrogels are critically analyzed. The incorporation of various nanomaterials into chitosan-based hydrogels, such as nanoparticles, graphene, and metal-organic frameworks, has been explored to enhance their performance. The mechanisms of water purification, including adsorption, filtration, and antimicrobial activity, are also discussed in detail. The potential of chitosan-based hydrogels for the removal of pollutants, such as heavy metals, organic contaminants, and microorganisms, from water sources is highlighted. Moreover, the challenges and future perspectives of chitosan-based hydrogels in water treatment and water purification applications are also illustrated. Overall, this article provides valuable insights into the current state of the art regarding chitosan-based hydrogels for water purification applications and highlights their potential for addressing global water pollution challenges.