Extracellular matrix-mimetic electrically conductive nanofibrous scaffolds based on polyaniline-grafted tragacanth gum and poly(vinyl alcohol) for skin tissue engineering application

A novel ternary magnetic nanobiocomposite based on tragacanth-silk fibroin hydrogel for hyperthermia and biological properties

This study involves the development of a new nanocomposite material for use in biological applications. The nanocomposite was based on tragacanth hydrogel (TG), which was formed through cross-linking of Ca2+ ions with TG polymer chains. The utilization of TG hydrogel and silk fibroin as natural compounds has enhanced the biocompatibility, biodegradability, adhesion, and cell growth properties of the nanobiocomposite. This advancement makes the nanobiocomposite suitable for various biological applications, including drug delivery, wound healing, and tissue engineering. Additionally, Fe3O4 magnetic nanoparticles were synthesized in situ within the nanocomposite to enhance its hyperthermia efficiency. The presence of hydrophilic groups in all components of the nanobiocomposite allowed for good dispersion in water, which is an important factor in increasing the effectiveness of hyperthermia cancer therapy. Hemolysis and 3-(4,5 dimethylthiazol-2-yl)-2,5-diphenyl tetrazolium bromide assays were conducted to evaluate the safety and efficacy of the nanobiocomposite for in-vivo applications. Results showed that even at high concentrations, the nanobiocomposite had minimal hemolytic effects. Finally, the hyperthermia application of the hybrid scaffold was evaluated, with a maximum SAR value of 41.2 W/g measured in the first interval.

Electrochemical technique to develop surface-controlled polyaniline nano-tulips (PANINTs) on PCL-reinforced chitosan functionalized (CS-f-Fe2O3) scaffolds for stimulating osteoporotic bone regeneration

Bone defects pose significant challenges in orthopedic surgery, often leading to suboptimal outcomes and complications. Addressing these challenges, we employed a three-electrode electrochemical system to fabricate surface-controlled polyaniline nano-tulips (PANINTs) decorated polycaprolactone (PCL) reinforced chitosan functionalized iron oxide nanoparticles (CS-f-Fe2O3) scaffolds. These structures were designed to emulate the natural extracellular matrix (ECM) and promote enhanced osseointegration by establishing a continuous interface between host bone and graft, thereby improving both biological processes and mechanical stability. In vitro experiments demonstrated that PANINTs-PCL/CS-f-Fe2O3 substrates significantly promoted the proliferation, differentiation, and spontaneous outgrowth and extension of MC3T3-E1 cell activity. The nanomaterials exhibited increased cell viability and osteogenic differentiation, as evidenced by elevated expression of bone-related markers such as ALP, ARS, COL-I, RUNX2, and SPP-I, as determined by qRT-PCR. Our findings underscore the regenerative potential of in situ cell culture systems for bone defects, emphasizing the targeted stimulation of essential cell subpopulations to facilitate rapid bone tissue regeneration.

Three-dimensional model of normal human dermal tissue using serial tissue sections

Background: This study aims to construct a three-dimensional model of skin dermis utilizing continuous tissue sections, with the primary objective of obtaining anatomical structure data for normal human dermal tissues. Methods: Normal skin tissue specimens were acquired, paraffin-embedded, and subjected to HE staining. Panoramic images of skin sections were captured using a microscope. Tissue section images were aligned using the SIFT and StackReg image alignment methods, with analysis conducted using the OpenCV module. Mimics17 software facilitated the reconstruction of the skin dermal 3D model, enabling the calculation of dermal porosity and the void diameter. Results: Panoramic skin slices exhibited high-resolution differentiation of dermal fibers and cellular structures. Both SIFT and StackReg image alignment methods yielded similar results, although the SIFT method demonstrated greater robustness. Successful reconstruction of the three-dimensional dermal structure was achieved. Quantitative analysis revealed a dermal porosity of 18.96 ± 4.41% and an average pore diameter of 219.29 ± 34.27 μm. Interestingly, the porosity of the dermis exhibited a gradual increase from the papillary layer to the fourth layer, followed by a transient decrease and then a gradual increase. The distribution of the mean pore diameter mirrored the pattern observed in porosity distribution. Conclusion: Utilizing the continuous skin tissue slice reconstruction technique, this study successfully reconstructed a high-precision three-dimensional tissue structure of the skin. The quantitative analysis of dermal tissue porosity and average pore diameter provides a standardized dataset for the development of biomimetic tissue-engineered skin.

Carbon-Based Nanomaterials Decorated Electrospun Nanofibers in Biosensors: A Review

Nanomaterials have revolutionized scientific research due to their exceptional physical and chemical capabilities. Carbon-based nanomaterials such as graphene and its derivates have excellent electrical, optical, thermal, physical, and chemical properties that have made them indispensable in several industries worldwide, including medicine, electronics, and energy. By incorporating carbon-based nanomaterials as nanofillers in electrospun nanofibers (ESNFs), smoother and highly conductive nanofibers can be achieved that possess a large surface area and porosity. This approach provides a superior alternative to traditional materials in the development of improved biosensors. Carbon-based ESNFs, among the most exciting new-generation materials, have many applications, including filtration, pharmaceuticals, biosensors, and membranes. The electrospinning technique is a highly efficient and cost-effective method for producing desired nanofibers compared to other methods. Various types of natural and synthetic organic polymers have been successfully utilized in solution electrospinning to produce nanofibers directly. To create diagnostics devices, various biomolecules like antibodies, enzymes, aptamers, ligands, and even cells can be bound to the surface of nanofibers. Electrospun nanofibers can serve as an immobilization matrix to create a biofunctional surface. Thus, biosensors with desired features can be produced in this way. This study comprehensively reviews biosensors that integrate nanodiamonds, fullerenes, carbon nanotubes, graphene oxide, and carbon dots into electrospun nanofibers.

New Polyaniline Derivative with Two Central Ester Groups: Synthesis, Characterization, and Theoretical Study

A new polyaniline derivative was prepared to study the formation of quinoid-diimine units in its polymer. The monomer and polymer were experimentally and theoretically characterized. Both polymers have one or two electron-withdrawing groups as side substituents. The polymers' quinoid-diimine unit composition is affected by the electron-withdrawing side groups of aniline. The presence of the quinoid-diimine group diminished for the two electron-withdrawing groups of aniline. The polymer conductivity is different than with respect to polyemeraldine, associated with the quinoid-diimine units' composition. The quinoid-diimine composition is strongly increased in the polymer containing one electron-withdrawing group. Moreover, the polymer presented good solubility in organic solvents and moderate thermal stability.