Separable calcium sulphate modified biochar gel beads for efficient cadmium removal from wastewater

Evaluation of large-scale poultry manure-derived biochar for efficient cadmium removal in zinc smelter wastewater

Cadmium (Cd), a carcinogen, is released from industrial activities like metal refineries and battery runoff, with significant contamination reported near zinc smelters in Korea. This study addresses the issue using an efficient, economical adsorption process with waste-derived biochar-based adsorbents known for high Cd removal. Poultry manure (PM), typically used as fertilizer, can lead to environmental pollution if mismanaged; therefore, it was pyrolyzed to produce biochar. The resulting poultry manure biochar (PMBC) was produced on a large scale (15 ton/day), demonstrating feasibility for large-scale implementation. The effectiveness of PMBC as an adsorbent for Cd was evaluated using wastewater discharged from a zinc smelter. The Cd adsorption capacity of PMBC (60.39 mg/g) was lower than that (302.0 mg/g) of hen manure biochar produced at a laboratory scale in our previous study but was comparable to other biochars reported in the literature. Response surface methodology analysis indicated that reaction time, dose, and agitation significantly influenced Cd removal by PMBC, whereas pH had a negligible impact. Notable contributions to Cd adsorption include the release of K+ from PMBC and the presence of O-containing functional groups. Under continuous flow conditions with real wastewater, Cd was not detected in the effluent for the initial 8 h, and PMBC sustained a removal efficiency of 40.77% until saturation was reached. The results from wastewater treatment and large-scale biochar production offer valuable insights into the potential of biochar as a medium for addressing environmental issues in real-world applications.

Recent advances in alginate-based composite gel spheres for removal of heavy metals

The discharge of heavy metal ions from industrial wastewater into natural water bodies is a consequence of global industrialisation. Due to their high toxicity and resistance to degradation, these heavy metal ions pose a substantial threat to human health as they accumulate and amplify. Alginate-based composite gels exhibit good adsorption and mechanical properties, excellent biodegradability, and non-toxicity, making them environmentally friendly heavy metal ion adsorbents for water with promising development prospects. This paper introduces the basic properties, cross-linking methods, synthetic approaches, modification methods, and manufacturing techniques of alginate-based composite gels. The adsorption properties and mechanical strength of these gels can be enhanced through surface modification, multi-component mixing, and embedding. The main production processes involved are sol-gel and cross-linking methods. Additionally, this paper reviews various applications of alginate composite gels for common heavy metals, rare earth elements, and radionuclides and elucidates the adsorption mechanism of alginate composite gels. This study aimed to provide a reference for synthesising new, efficient, and environmentally friendly alginate-based adsorbents and to contribute new ideas and directions for addressing the issue of heavy metal pollution.

Dual valorization of coastal biowastes for tetracycline remediation and biomethane production: A composite assisted anaerobic digestion

Harnessing coastal biowaste for dual valorization in water treatment and biofuel production holds paramount importance for sustainability and resource challenges. This study investigated the potential of engineered composite (CABC) derived from coastal biowaste-based materials for tetracycline (TC) removal and biomethane production. High-yield calcium carbonate (CaCO3; 95.65%; bivalve shells) and biochar (GA-BC; 41.50%; green macroalgae) were produced and used as precursors for CABC. The characterization results revealed presence of β-CaCO3 and ν2-CO3 aragonite in CaCO3, and composite homogeneity was achieved. The CABC exhibited a maximum TC sorption capacity of 342.26 mg/g via synergistic sorption mechanisms (i.e., surface/pore filling, electrostatic attraction, calcium ion exchange, and chelation). Supplementation of anaerobic digestion process with GA-BC, CaCO3, and CABC was investigated via three consecutive cycles. Biochemical methane potential of glucose as a sole substrate was increased from 157.50 to 217.00, 187.00, and 259.00 mL-CH4, while dual substrate (glucose+TC) treatment was increased from 94.5 to 146.5, 129.0, and 153.00 mL-CH4 for GA-BC, CaCO3, and CABC, respectively. Moreover, system stability and TC removal were increased with the addition of GA-BC (40.90%), CaCO3 (16.30%), and CABC (53.70%). Therefore, this study exemplifies the circular bioeconomy approach, demonstrating the sustainable use of biowaste-derived composite for water treatment and biofuel production.

Adsorption optimization and modeling of Hg2+ ions from aqueous solutions using response surface methodology by SNPs-CS bionanocomposite produced from rice husk agro-industrial waste as a novel environmentally-friendly bionanoadsorbent

In the present research, extraction of silica (SiO2) from rice husk (RH) was optimized and silica nanoparticles (SNPs) was produced using it and functionalized by chitosan (CS) functional groups to obtain CS functionalized SNPs (SNPs-CS) bionanocomposite for the first time. The physical and chemical characteristics of the produced materials were examined using structural analyses. The results of structural analyses confirmed the fine structure of the produced materials. The SNPs-CS bionanocomposite was applied to effectively remove Hg2+ ions from aqueous solutions as an environmentally-friendly bionanoadsorbent and optimization and modeling of the adsorption conditions was explored using designed experiments by Design-Expert software with central composite design (CCD) and response surface methodology (RSM). Optimum adsorption conditions were obtained as solution pH of 6, SNPs-CS dosage of 0.1 g L-1 and Hg2+ ions concentration of 100 mg L-1 by removal efficiency of 85% and desirability function of 0.876. The results of adsorption kinetic showed a better fit of the pseudo-second-order model with experimental data, indicating the chemisorption of the adsorption process. The better fit of the Langmuir model with experimental data was confirmed by the results of adsorption isotherms, demonstrating monolayer adsorption on the homogeneous surface. The adsorption thermodynamic results illustrated the exothermicity and spontaneity of the adsorption reaction. The results of SNPs-CS recovery depicted its excellent recovery ability of removal efficiency with more than 90% after five consecutive adsorption and desorption cycles, which proved high potential of the produced bionanocomposite for industrial applications.