Modeling and investigation of swelling kinetics of sodium carboxymethyl cellulose/starch/citric acid superabsorbent polymer

Recent advances of intelligent polymer gels as active carriers for medical imaging-guided cancer therapy: A review

Cancer is a major global health challenges and various imaging-guided techniques are gaining prominence for its diagnosis and therapy with the advantages of high sensitivity, spatial resolution, and quantitative capability. The effectiveness of these approaches mainly relies on the establishment of a responsive platform. The intelligent polymer gel composites as the active carriers have drawn considerable attention owing to their outstanding versatility, three-layer network structure, mechanical adjustability and so forth, which may be contribute to loading drug, imaging probe, and targeting biomarkers in medical imaging-guided cancer therapy (IGCT). In this review, significant progress has been highlighted in fabrication of intelligent polymer gel composites with multi-functional molecules for the anticancer drugs delivery systems, multimodal imaging-guided management and developing molecular devices in various tumors. In addition, we also explore the current challenges and future development directions of these composites as carriers with the assistance of IGCT for precise anti-cancer applications in clinical practice.

Solubility of cellulose derivatives is a limited indicator of their function on retarding starch digestion

Cellulose and its derivatives have been utilized as additives and functional fibers in food industries. The solubility has been traditionally used to categorize cellulose derivatives, whilst their complex effects within food matrix are less understood. In this study, insoluble forms i.e., cellulose and ethyl cellulose (EC), and soluble forms i.e., methylcellulose (MC) and sodium carboxymethylcellulose (Na-CMC) were selected to investigate the mechanisms by which the two groups of cellulose ingredients regulate in vitro digestibility of starch-based foods. In the Michaelis-Menton analysis, the addition of insoluble cellulose or EC as inhibitors tended to decrease the Vmax of α-amylase at a non-significant level compared to the value without inhibitors (p > 0.05). Starch-based matrix with insoluble cellulose or EC became less porous, but did not consistently resulting in an increased level of resistant starch content. Soluble MC and Na-CMC as inhibitors not only significantly reduced the Vmax (decreased from 1.0 to 0.8 and 0.9 mg/min, respectively) and kcat/Km (catalytic efficiency, decreased from 30.9 to 22.2 and 23.3, respectively) of α-amylase (p < 0.05), but the formed matrices had higher level of short-range ordering (R1047/1022). The soluble forms of cellulose derivatives resulted in higher level of resistant starch (up to 6 %), compared to insoluble cellulose. In summary, this study provides new insights into the complexity in the effects of cellulose derivatives on the digestion of food matrix, and suggests that solubility is a limited indicator of their function on retarding starch digestion. The structural changes in starch-based food matrix induced by cellulose derivatives should be considered in the development of functional foods with low glycemic index.

Synthesis of a chitosan-based superabsorbent polymer and its influence on cement paste

To address the challenge of adaptability between cement-based materials and conventional superabsorbent polymers (sodium polyacrylate, Na-PA), a chitosan-based superabsorbent polymer (CSP) with high salt and alkaline resistance was synthesized, and the optimal synthesis process was determined by a single-factor method. The macroscopic performance and microstructure of CSP and Na-PA were compared, and their influences on cement paste were studied. The results show that CSP exhibits a gradual swelling process during water absorption, which is independent of the solution environment. The poriferous structure of CSP allows it to form a network composed of gel membranes. The introduction of amide group enhances the resistance of CSP to salt and alkaline conditions. The autogenous shrinkage of cement paste is mitigated by CSP, with a superior effect compared to Na-PA. The longer desorption time of CSP allows it to promote cement hydration for a longer period, reducing the loss of compressive strength. The heat release, chemically bound water and hydration products (portlandite and amorphous substances) of CSP pastes are higher than those of Na-PA pastes. The water desorption from CSP fills some middle capillary pores and mesopores, leading to the pores in the hardened cement paste being more concentrated in smaller sizes.

Preparation of superabsorbent composite(s) based on dialdehyde cellulose extracted from banana fiber waste

The study focus is the valorization of banana agriculture by products by the extraction and derivatization of cellulose and its incorporation in formulations to produce superabsorbent materials endowed with high water absorption performances. The extracted cellulose (BP) was subjected to a controlled oxidation by sodium periodate to convert it to cellulose dialdehyde (DAC) with controlled aldehyde content. The cellulosic materials were incorporated into a suspension containing acrylic acid (AA) and itaconic acid (IA) to produce composite hybrid hydrogels (SA-BP/SA-DAC) by radical chain polymerization in water, using N,N-methylene-bis-acrylamide (MBA) as a cross-linking agent and potassium persulfate (KPS) as an initiator. The prepared materials were characterized using techniques such as Fourier-transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), and rheological analysis. Additionally, the absorption and re-swelling capacities of the superabsorbent composites (SAPs) were assessed through kinetic studies in water and NaCl solution. Notably, dialdehyde cellulose (DAC), due to its low crystallinity index, hydrophilicity (attributed to aldehyde and hemiacetal functions), and high polarity, holds promise for enhancing the swelling and water retention capacity of the hydrogel. A water absorption capacity as high as 1240±60 g.g-1 was obtained for SA-DAC with a DAC content of 5 %wt. Additionally, the reusability of the SAPs was evidenced.

Enhancing leachate management with antibacterial nanocomposites incorporating plant-based carbon dots and Satureja Khuzestanica essential oils

Landfill leachate, a complex mixture of pollutants, poses a significant environmental hazard. This study reports the synthesis and characterization of superabsorbent nanocomposites (SANs) designed for enhanced performance in waste management applications. SANs were prepared using carboxymethyl cellulose (CMC) and sodium polyacrylate (SPA) as the main components, carbon dots (CDs) to improve absorption, and Satureja Khuzestanica essential oil (SEO) for antibacterial performance. The results demonstrated that the addition of CDs significantly increased the absorption capacity and liquid retention of the samples, with a water absorption capacity reaching up to 8621 %. Furthermore, the samples exhibited high mechanical strength, with tensile strength improving by over 100 % in the presence of CDs. The inclusion of SEO provided strong antibacterial activity against Escherichia coli and Staphylococcus aureus, with inhibition zones measuring up to 26 mm. These SANs, with their high absorption capacity, mechanical robustness, and antibacterial properties, show great potential for improving waste management practices, particularly in leachate absorption strategies.

Synergistic effects of cellulose nanocrystal on the mechanical and shape memory properties of TPU composites

Cellulose nanocrystal is a nanomaterial that has a large specific surface area, high surface energy, and high strength. As well, it is biocompatible, environmentally friendly, nontoxic, and can be extracted from biomass resources. Because of these features, cellulose nanocrystals can be used to improve the mechanical properties of polymer matrices with a shape memory effect and as a shape memory switch. In this study, a polytrimethylene ether glycol-based thermoplastic polyurethane (TPU)/cellulose nanocrystal (CNC) composite was prepared via an in-situ polymerization process to create a self-healing polymer matrix. Also, the effect of CNC doses in low concentrations (≤2 wt%) on the different properties of the resulting bio-nanocomposite was investigated. The results showed that the introduction of CNCs affects the hydrogen bonding within the polymer matrix and provides better thermal stability in the high temperature range than pure TPU. Furthermore, the samples with 0 wt%, 0.75 wt%, 1 wt%, and 2 wt% of CNC exhibited an increasing trend in tensile strength with values of 11.71 MPa, 18.95 MPa, 17.88 MPa, and 26.18 MPa, respectively, which indicates a remarkable improvement in mechanical strength. The shape memory behavior was also notably prominent in this polymer composite, where the composite containing 2 wt% of CNC showed the fastest recovery time (240 s) at 75 °C with the highest shape retention. Moreover, their flow behavior and deformation capacity were examined through rheology tests. Besides, docking simulations were conducted in silico to assess the interaction of the TPU/CNC composite with the DNA gyrase enzyme. The interaction between CNC/TPU composite and DNA gyrase was meticulously analyzed across 10 distinct conformations, yielding docking scores ranging from -6.5 Kcal/mol to -5.3 Kcal/mol. Overall, the physico-mechanical properties of the TPU/CNC composites were substantially enhanced with the incorporation of nanofillers.

Effects of hydrocolloids on mechanical properties, viscoelastic and microstructural properties of starch-based modeling clay

The effects of various hydrocolloids (guar gum, xanthan gum, and carboxymethyl cellulose) on the texture, rheology, and microstructural properties of modeling clay prepared with cassava starch were investigated. Notably, incorporation of 3 % guar gum and 4 % xanthan gum into starch-based modeling clay resulted in enhancements of 94.12 % and 77.47 % in cohesiveness, and 64.70 % and 66.20 % in extensibility, respectively. For starch-based modeling clay with added guar gum and xanthan gum, compared to formulations without hydrocolloids, the linear viscoelastic range exceeded 0.04 %, and the frequency dependence of both maximum creep compliance (Jmax) and storage modulus (G') was significantly reduced. This indicates a more stable network structure and enhanced resistance to deformation. Results from Fourier Transform Infrared (FTIR) spectroscopy and X-ray diffraction (XRD) confirmed that the physical interactions between starch and various hydrocolloids, along with the addition of these hydrocolloids, inhibited the degradation effect of thermomechanical processing on the crystalline structure of starch. With the addition of guar gum, it is observed that a continuous and dense network structure forms within the starch-based modeling clay, and starch particles are distributed uniformly. In conclusion, hydrocolloids enhances the properties of starch-based modeling clay, introducing an innovative solution to the modeling clay sector.

Advancements in Cellulose-Based Superabsorbent Hydrogels: Sustainable Solutions across Industries

The development of superabsorbent hydrogels is experiencing a transformative era across industries. While traditional synthetic hydrogels have found broad utility, their non-biodegradable nature has raised environmental concerns, driving the search for eco-friendlier alternatives. Cellulose-based superabsorbents, derived from sustainable sources, are gaining prominence. Innovations include biodegradable polymer hydrogels, natural cellulose-chitosan variants, and cassava starch-based alternatives. These materials are reshaping agriculture by enhancing soil fertility and water retention, serving as potent hemostatic agents in medicine, contributing to pollution control, and providing eco-friendly construction materials. Cellulose-based hydrogels also offer promise in drug delivery and hygiene products. Advanced characterization techniques aid in optimizing their properties, while the shift towards circular economy practices further highlights sustainability. This manuscript provides a comprehensive overview of these advancements, highlighting their diverse applications and environmental benefits.

Porous superabsorbent composites prepared from aqueous foam template and application evaluation

Rapid water absorption is very important for the application of superabsorbent polymers under dry or semi-dry conditions, but there are currently few relevant studies. In this context, a novel porous superabsorbent of chitosan-grafted acrylic copolymer-2-acrylamido-2-methylpropanesulfonic acid/sapindus mukorossi pericarp/calcined oil shale semi-coke (CS-g-P(AA-co-AMPS)/SMP/COSSC) was prepared by a green and convenient foam template method, which was triggered by redox polymerization. The rich pore structure of the porous superabsorbent was conducive to accelerating the water absorption rate. It only took 15 min to reach a swelling capacity of 650 g g-1 in distilled water. Soil experiments show that even with the addition of 0.5 wt% porous superabsorbent, the soil water retention time can be extended to 7 days. Finally, it was applied to the growth of cabbage seeds and it was found that the growth was significantly improved. Based on these excellent properties, we expect to provide a valuable reference for the preparation of fast-absorbing materials through the green water-based foam template method, contributing to sustainable agriculture.

One Novel Hybrid Flexible Piezoresistive/Piezoelectric Double-Mode Sensor Design for Water Leakage Monitoring

Water leakage is a significant issue in infrastructure, such as submarine tunnels, which can lead to major disasters and property losses. Therefore, it is of great significance to develop a water leakage detection sensor with simple preparation process, low cost, and small limitation of applicable location. In this study, a novel hybrid flexible piezoresistive/piezoelectric double-mode sensor with a sandpaper negative microstructure is proposed. A unique dual-path perception structure is designed that can simultaneously and independently detect two signals of water leakage frequency and water leakage volume. The piezoresistive layer is formed by polydimethylsiloxane (PDMS) coated with multiwalled carbon nanotubes (MWCNTs), which is molded by sandpaper molding. By sensing the deformation caused by the swelling of superabsorbent polymers (SAPs), the water leakage volume can be detected as low as 0.5 mL. The piezoelectric layer is a polyvinylidene fluoride-trifluoroethylene copolymer (PVDF-TrFE) film prepared by the spin-coating method, and the water leakage frequency (0.5-4 Hz) is detected by direct contact with water droplets. This work also studied the performance of the double-mode sensor under low temperature and seawater leakage conditions and further verified its reliability in different environments. The design of the new hybrid flexible piezoresistive/piezoelectric double-mode sensor provides a new possibility for water leakage monitoring, such as in submarine tunnels.