Lethality of high-pressure carbon dioxide on Shiga toxin-producing Escherichia coli, Salmonella and surrogate organisms on beef jerky

Prevalence, serotype, antimicrobial susceptibility, contamination factors, and control methods of Salmonella spp. in retail fresh fruits and vegetables: A systematic review and meta-analysis

This research presents a comprehensive review of Salmonella presence in retail fresh fruits and vegetables from 2010 to 2023, utilizing data from recognized sources such as PubMed, Scopus, and Web of Science. The study incorporates a meta-analysis of prevalence, serovar distribution, antimicrobial susceptibility, and antimicrobial resistance genes (ARGs). Additionally, it scrutinizes the heterogeneous sources across various food categories and geographical regions The findings show a pooled prevalence of 2.90% (95% CI: 0.0180-0.0430), with an increase from 4.63% in 2010 to 5.32% in 2022. Dominant serovars include S. Typhimurium (29.14%, 95% CI: 0.0202-0.6571) and S. Enteritidis (21.06%, 95% CI: 0.0181-0.4872). High resistance rates were noted for antimicrobials like erythromycin (60.70%, 95% CI: 0.0000-1.0000) and amoxicillin (39.92%, 95% CI: 0.0589-0.8020). The most prevalent ARGs were blaTEM (80.23%, 95% CI: 0.5736-0.9692) and parC mutation (66.67%, 95% CI: 0.3213-0.9429). Factors such as pH, water activity, and nutrient content, along with external factors like the quality of irrigation water and prevailing climatic conditions, have significant implications on Salmonella contamination. Nonthermal sterilization technologies, encompassing chlorine dioxide, ozone, and ultraviolet light, are emphasized as efficacious measures to control Salmonella. This review stresses the imperative need to bolster prevention strategies and control measures against Salmonella in retail fresh fruits and vegetables to alleviate related food safety risks.

The regulation of carbon dioxide on food microorganisms: A review

This review presents a survey of two extremely important technologies about CO2 with the effectiveness of controlling microorganisms - atmospheric pressure CO2-based modified atmosphere packaging (MAP) and high pressure CO2 non-thermal pasteurization (HPCD). CO2-based MAP is effectively in delaying the lag and logarithmic phases of microorganisms by replacing the surrounding air, while HPCD achieved sterilization by subjecting food to either subcritical or supercritical CO2 for some time in a continuous, batch or semi-batch way. In addition to the advantages of healthy, eco-friendly, quality-preserving, effective characteristic, some challenges such as the high drip loss and packaging collapse associated with higher concentration of CO2, the fuzzy mechanisms of oxidative stress, the unproven specific metabolic pathways and biomarkers, etc., in CO2-based MAP, and the unavoidable extraction of bioactive compounds, the challenging application in solid foods with higher efficiency, the difficult balance between optimal sterilization and optimal food quality, etc., in HPCD still need more efforts to overcome. The action mechanism of CO2 on microorganisms, researches in recent years, problems and future perspectives are summarized. When dissolved in solution medium or cellular fluids, CO2 can form carbonic acid (H2CO3), and H2CO3 can further dissociate into bicarbonate ions (HCO3-), carbonate (CO32-) and hydrogen cations (H+) ionic species following series equilibria. The action mode of CO2 on microorganisms may be relevant to changes in intracellular pH, alteration of proteins, enzyme structure and function, alteration of cell membrane function and fluidity, and so on. Nevertheless, the effects of CO2 on microbial biofilms, energy metabolism, protein and gene expression also need to be explored more extensively and deeply to further understand the action mechanism of CO2 on microorganisms.

Proposal and Verification of the Theory of Layer-by-Layer Elimination of Biofilm in Listeria monocytogenes

Biofilms are microbial communities that represent a high abundance of microbial life forms on Earth. Within biofilms, structural changes during clearance processes occur in three spatial and temporal dimensions; therefore, microscopy and quantitative image analysis are essential in elucidating their function. Here, we present confocal laser scanning microscopy (CLSM) in conjunction with ISA-2 software analysis for the automated and high-throughput quantification, analysis, and visualisation of biofilm interiors and overall biofilm properties in three spatial and temporal dimensions. This paper discusses the removal process of Listeria monocytogenes (LM) biofilms using slightly acidic electrolytic water, non-electrolytic hypochlorite water, and alternating the use of strongly acidic and strongly alkaline electrolytic water. The results show that the biofilm gradually thins and gutters from the initial viscous dense and thick morphology under the action of either biocide. This process is consistent with first-level kinetics. After CLSM filming to observe the biofilm structure, analysis software was used to process and quantify the biovolume, average biofilm thickness, biofilm roughness and other indicators; fluorescence enzyme markers were used to verify the remaining amount of extracellular nucleic acid. In this study, we proposed and validated the theory of layer-by-layer elimination of LM biofilm.

Genetic Determinants of Stress Resistance in Desiccated Salmonella enterica

Enteric pathogens, including Salmonella, are capable of long-term survival after desiccation and resist heat treatments that are lethal to hydrated cells. The mechanisms of dry-heat resistance differ from those of wet-heat resistance. To elucidate the mechanisms of dry-heat resistance in Salmonella, screening of the dry-heat resistance of 108 Salmonella strains, representing 39 serotypes, identified the 22 most resistant and the 8 most sensitive strains for comparative genome analysis. A total of 289 genes of the accessory genome were differently distributed between resistant and sensitive strains. Among these genes, 28 proteins with a putative relationship to stress resistance were selected for to quantify relative gene expression before and after desiccation and expression by solid-state cultures on agar plates relative to cultures growing in liquid culture media. Of these 28 genes, 15 genes were upregulated (P < 0.05) after desiccation or by solid-state cultures on agar plates. These 15 genes were cloned into the low-copy-number vector pRK767 under the control of the lacZ promoter. The expression of 6 of these 15 genes increased (P < 0.05) resistance to dry heat and to treatment with pressure of 500 MPa. Our finding extends the knowledge of mechanisms of stress resistance in desiccated Salmonella to improve control of this bacterium in dry food. IMPORTANCE This study directly targeted an increasing threat to food safety and developed knowledge and targeted strategies that can be used by the food industry to help reduce the risk of foodborne illness in their dry products and thereby reduce the overall burden of foodborne illness. Genomic and physiological analyses have elucidated mechanisms of bacterial resistance to many food preservation technologies, including heat, pressure, disinfection chemicals, and UV light; however, information on bacterial mechanisms of resistance to dry heat is scarce. Mechanisms of tolerance to desiccation likely also contribute to resistance to dry heat, but this assumption has not been verified experimentally. It remains unclear how mechanisms of resistance to wet heat relate to dry-heat resistance. Thus, this study will fill a knowledge gap to improve the safety of dry foods.

Antimicrobial activity and drying potential of high intensity blue light pulses (455 nm) emitted from LEDs

Decontamination of low water activity (a_w) foods, like pet foods is a challenging task. Treatment using light emitting diode (LED) is an emerging decontamination method, that can induce photodynamic inactivation in bacteria. The objective of this study was to understand the effect of selected product and process parameters on the antibacterial efficacy of treatment using light pulses of 455 nm wavelength on dry powdered Salmonella and pet foods equilibrated to 0.75 a_w. The surface temperature increase, weight loss, and a_w decrease in the samples were determined after LED treatments with different doses. S. Typhimurium on pet foods showed better sensitivity to 455 nm LED treatment than the powdered S. Typhimurium. For instance, 455 nm LED treatment with 785.7 J/cm² dose produced a log reduction of 1.44 log (CFU/g) in powdered S. Typhimurium population compared to 3.22 log (CFU/g) on pet food. The LED treatment was less effective against 5-strain cocktail of Salmonella in low a_w pet foods. The treated samples showed significant reduction in weight and a_w showing the heating and drying potential of 455 nm LED treatment. Significant lipid oxidation was observed in the treated pet foods. Overall, the dose, treatment time, and sample type influenced the Salmonella inactivation efficacy of 455 nm LED treatment in low a_w conditions.

Influence of drying conditions, food composition, and water activity on the thermal resistance of Salmonella enterica

Salmonella contamination of low-water activity (a_w) foods poses a serious concern worldwide. The present study was conducted to assess the effects of drying conditions, food composition, and water activity on the desiccation tolerance and thermal resistance of S. Enteritidis FUA1946, S. Senftenberg ATCC43845 and S. Typhimurium ATCC13311 in pet food, binder formulation, and skim milk powder. The samples were wet inoculated with the individual Salmonella strains and were equilibrated to a_w 0.33 and 0.75, followed by an isothermal treatment at 70 °C. The thermal inactivation data was fitted to the Weibull model. Irrespective of the a_w, food composition and physical structure of the selected foods, strain S. Enteritidis FUA1946 displayed the highest desiccation and thermal resistance, followed by S. Senftenberg ATCC43845 and S. Typhimurium ATCC13311. The food matrix and strain type significantly (p < 0.05) influenced the thermal resistance of microorganisms in foods along with a_w change during thermal treatments. To further study the effect of food composition, an additional set of experiments using dry inoculation of the resistant Salmonella strain in the low-a_w foods was designed. Significant (p < 0.05) matrix-dependent interaction on Salmonella reduction was observed. The water adsorption isotherms of selected low-a_w foods were measured at 20 and 70 °C to relate the thermal inactivation kinetics with the change in the a_w. The characterization of thermal resistance of the Salmonella serovars in low-a_w products with different compositions and a_w in this study may be used for the validation of thermal challenge studies.

Endolysin LysSTG2: Characterization and application to control Salmonella Typhimurium biofilm alone and in combination with slightly acidic hypochlorous water

The gene encoding LysSTG2, an endolysin from Salmonella-lytic bacteriophage STG2, was cloned, overexpressed, and characterized. LysSTG2 consists of a single domain belonging to the Peptidase_M15 superfamily. LysSTG2 showed strong lytic activity against chloroform-treated S. Typhimurium cells after incubation at 4-50 °C for 30 min, at pH ranging from 7.0 to 11.0, and in the presence of NaCl from 0 to 300 mmol/L. It also showed lytic activity against all the 14 tested Gram-negative strains treated with chloroform, including Salmonella, E. coli, and Pseudomonas aeruginosa, but not against the Gram-positive bacteria tested. In addition, LysSTG2 (100 μg/mL) reduced the viability of S. Typhimurium NBRC 12529 planktonic cells by 1.2 log and that of the biofilm cells after 1-h treatment. Sequential treatment of slightly acidic hypochlorous water (SAHW) containing 40 mg/L available chlorine and LysSTG2 (100 μg/mL) was effective on S. Typhimurium NBRC 12529 biofilm cells, removing more than 99% of biofilm cells. These results demonstrate that LysSTG2 alone can effectively kill S. Typhimurium cells after permeabilization treatment and successfully control S. Typhimurium in biofilms in combination with SAHW, suggesting that the combined use of LysSTG2 and SAHW might be a novel and promising method for combating S. Typhimurium in food industries.

Inactivation of foodborne pathogens by the synergistic combinations of food processing technologies and food-grade compounds

There is a need to develop food processing technologies with enhanced antimicrobial capacity against foodborne pathogens. While considering the challenges of adequate inactivation of pathogenic microorganisms in different food matrices, the emerging technologies are also expected to be sustainable and have a minimum impact on food quality and nutrients. Synergistic combinations of food processing technologies and food-grade compounds have a great potential to address these needs. During these combined treatments, food processes directly or indirectly interact with added chemicals, intensifying the overall antimicrobial effect. This review provides an overview of the combinations of different thermal or nonthermal processes with a variety of food-grade compounds that show synergistic antimicrobial effect against pathogenic microorganisms in foods and model systems. Further, we summarize the underlying mechanisms for representative combined treatments that are responsible for the enhanced microbial inactivation. Finally, regulatory issues and challenges for further development and technical transfer of these new approaches at the industrial level are also discussed.