Quantitative Assessment of Six Different Reagent Gases for Charge Transfer Dissociation (CTD) of Biological Ions

Sequencing of Phosphopeptides Using a Sequential Charge Inversion Ion/Ion Reaction and Electron Capture Dissociation Workflow

Protein phosphorylation, a common post-translational modification (PTM), is fundamental in a plethora of biological processes, most importantly in modulating cell signaling pathways. Matrix-assisted laser desorption/ionization (MALDI) coupled to tandem mass spectrometry (MS/MS) is an attractive method for phosphopeptide characterization due to its high speed, low limit of detection, and surface sampling capabilities. However, MALDI analysis of phosphopeptides is constrained by relatively low abundances in biological samples and poor relative ionization efficiencies in positive ion mode. Additionally, MALDI tends to produce singly charged ions, generally limiting the accessible MS/MS techniques that can be used for peptide sequencing. For example, collision induced dissociation (CID) is readily amendable to the analysis of singly charged ions, but results in facile loss of phosphoric acid, precluding the localization of the PTM. Electron-based dissociation methods (e.g., electron capture dissociation, ECD) are well suited for PTM localization, but require multiply charged peptide cations to avoid neutralization during ECD. Conversely, phosphopeptides are readily ionized using MALDI in negative ion mode. If the precursor ions are first formed in negative ion mode, a gas-phase charge inversion ion/ion reaction could then be used to transform the phosphopeptide anions produced via MALDI into multiply charged cations that are well-suited for ECD. Herein we demonstrate a multistep workflow combining a charge inversion ion/ion reaction that first transforms MALDI-generated phosphopeptide monoanions into multiply charged cations, and then subjects these multiply charged phosphopeptide cations to ECD for sequence determination and phosphate bond localization.

Installation protocol for charge transfer dissociation mass spectrometry on ion trapping mass spectrometers

RATIONALE

Charge transfer dissociation (CTD) is a novel fragmentation technique that demonstrates enhanced structural characterization for a wide variety of molecules compared to standard fragmentation techniques like collision-induced dissociation (CID). Alternative fragmentation techniques, such as electron transfer dissociation, electron capture dissociation, and ultraviolet photodissociation, also overcome many of the shortfalls of CID, but none of them are a silver bullet that can adequately characterize a wide variety of structures and charge states of target compounds. Given the diversity of structural classes and their occasional obstinance towards certain activation techniques, alternative fragmentation techniques are required that rely on novel or alternative modes of activation.

METHODS

Herein, we present a step-by-step protocol for the installation of CTD on a quadrupole ion trap mass spectrometer and best practices for optimizing the signal-to-noise ratio and acquisition times for CTD mass spectra.

RESULTS

In addition to two CTD installations in the Jackson laboratory, CTD has also been installed, and is currently in operation, on two 3D ion trap mass spectrometers in France: one in the laboratory of Dr. David Ropartz and Dr. Hélène Rogneaux at INRAE in Nantes, and the other in the laboratory of Dr. Jean-Yves Salpin at Université d'Évry Val-d'Essonne, part of the Paris-Saclay University system.

CONCLUSIONS

Here, we provide a visual protocol to help others accomplish the instrument modification.

The Omnitrap Platform: A Versatile Segmented Linear Ion Trap for Multidimensional Multiple-Stage Tandem Mass Spectrometry

Multidimensional multiple-stage tandem processing of ions is demonstrated successfully in a novel segmented linear ion trap. The enhanced performance is enabled by incorporating the entire range of ion activation methods into a single platform in a highly dynamic fashion. The ion activation network comprises external injection of reagent ions, radical neutral species, photons, electrons, and collisions with neutrals. Axial segmentation of the two-dimensional trapping field provides access to a unique functionality landscape through a system of purpose-designed regions for processing ions with maximum flexibility. Design aspects of the segmented linear ion trap, termed the Omnitrap platform, are highlighted, and motion of ions trapped by rectangular waveforms is investigated experimentally by mapping the stability diagram, tracing secular frequencies, and exploring different isolation techniques. All fragmentation methods incorporated in the Omnitrap platform involving radical chemistry are shown to provide complete sequence coverage for partially unfolded ubiquitin. Three-stage (MS3) tandem mass spectrometry experiments combining collision-induced dissociation of radical ions produced by electron meta-ionization and further involving two intermediate steps of ion isolation and accumulation are performed with high efficiency, producing information rich spectra with signal-to-noise levels comparable to those obtained in a two-stage (MS2) experiment. The advanced capabilities of the Omnitrap platform to provide in-depth top-down MSn characterization of proteins are portrayed. Performance is further enhanced by connecting the Omnitrap platform to an Orbitrap mass analyzer, while successful integration with time-of-flight analyzers has already been demonstrated.

Structural characterization of human milk oligosaccharides using ultrahigh performance liquid chromatography-helium charge transfer dissociation mass spectrometry

The combination of helium charge transfer dissociation mass spectrometry (He-CTD-MS) with ultrahigh performance liquid chromatography (UHPLC) is presented for the analysis of a complex mixture of acidic and neutral human milk oligosaccharides (HMOs). The research focuses on the identification of the monosaccharide sequence, the branching patterns, the sialylation/fucosylation arrangements, and the differentiation of isomeric oligosaccharides in the mixture. Initial studies first optimized the conditions for the UHPLC separation and the He-CTD-MS conditions. Results demonstrate that He-CTD is compatible with UHPLC timescales and provides unambiguous glycosidic and cross-ring cleavages from both the reducing and the nonreducing ends, which is not typically possible using collision-induced dissociation. He-CTD produces informative fragments, including 0,3An and 0,4An ions, which have been observed with electron transfer dissociation, electron detachment dissociation, and ultraviolet photodissociation (UVPD) and are crucial for differentiating the α-2,3- versus α-2,6-linked sialic acid (Neu5Ac) residues present among sialyllacto-N-tetraose HMOs. In addition to the linkage positions, He-CTD is able to differentiate structural isomers for both sialyllacto-N-tetraoses and lacto-N-fucopentaoses structures by providing unique, unambiguous cross-ring cleavages of types 0,2An, 0,2Xn, and 1,5An while preserving most of the labile Neu5Ac and fucose groups.

Structural Characterization of Natural and Synthetic Macrocycles Using Charge-Transfer Dissociation Mass Spectrometry

Research in natural products (NPs) has gained interest as drug developers turn to nature to combat problems with drug resistance, drug delivery, and emerging diseases. Whereas NPs offer a tantalizing source of new pharmacologically active compounds, their structural complexity presents a challenge for analytical characterization and organic synthesis. Of particular concern is the characterization of cyclic-, polycyclic-, or macrocyclic compounds. One example of endogenous compounds as inspiration for NP development are cobalamins, like vitamin B₁₂. An example of exogenous NPs is the class of macrolides that includes erythromycin. Both classes of macrocycles feature analogues with a range of modifications on their macrocyclic cores, but because of their cyclic nature, they are generally resistant to fragmentation by collision-induced dissociation (CID). In the present work, charge-transfer dissociation (CTD) was employed, with or without supplemental collisional activation, to produce radical-driven, high-energy fragmentation products of different macrocyclic precursors. With the assistance of collisional activation of CTnoD products, CTD frequently cleaved two covalent bonds within the macrocycle cores to reveal rich, informative spectra that helped identify sites of modification and resolve structural analogues. In a third example of macrocycle fragmentation, CTD enabled an impurity in a biological sample to be characterized as a cyclic polymer of nylon-6,6. In each example, CTD spectra are starkly different from CID and are highly reminiscent of other high-energy fragmentation techniques like extreme ultraviolet dissociative photoionization (XUV-DPI) and electron ionization-induced dissociation (EID). The results indicate that CTD-MS is a useful tool for the characterization of natural and synthetic macrocycles.

Charge transfer dissociation of a branched glycan with alkali and alkaline earth metal adducts

Alkali and alkaline earth metal adducts of a branched glycan, XXXG, were analyzed with helium charge transfer dissociation (He-CTD) and low-energy collision-induced dissociation (LE-CID) to investigate if metalation would impact the type of fragments generated and the structural characterization of the analyte. The studied adducts included 1+ and 2+ precursors involving one or more of the cations: H⁺ , Na⁺ , K⁺ , Ca²⁺ , and Mg²⁺ . Regardless of the metal adduct, He-CTD generated abundant and numerous glycosidic and cross-ring cleavages that were structurally informative and able to identify the 1,4-linkage and 1,6-branching patterns. In contrast, the LE-CID spectra mainly contained glycosidic cleavages, consecutive fragments, and numerous neutral losses, which complicated spectral interpretation. LE-CID of [M + K + H]²⁺ and [M + Na]⁺ precursors generated a few cross-ring cleavages, but they were not sufficient to identify the 1,4-linkage and 1,6-branching pattern of the XXXG xyloglucan. He-CTD predominantly generated 1+ fragments from 1+ precursors and 2+ product ions from 2+ precursors, although both LE-CID and He-CTD were able to generate 1+ product ions from 2+ adducts of magnesium and calcium. The singly charged fragments derive from the loss of H⁺ from the metalated product ions and the formation of a protonated complementary product ion; such observations are similar to previous reports for magnesium and calcium salts undergoing electron capture dissociation (ECD) activation. However, during He-CTD, the [M + Mg]²⁺ precursor generated more singly charged product ions than [M + Ca]²⁺ , either because Mg has a higher second ionization potential than Ca or because of conformational differences and the locations of the charging adducts during fragmentation. He-CTD of the [M + 2Na]²⁺ and the [M + 2 K]²⁺ precursors generated singly charged product ions from the loss of a sodium ion and potassium ion, respectively. In summary, although the metal ions influence the mass and charge state of the observed product ions, the metal ions had a negligible effect on the types of cross-ring cleavages observed.

Ultra-high-performance liquid chromatography charge transfer dissociation mass spectrometry (UHPLC-CTD-MS) as a tool for analyzing the structural heterogeneity in carrageenan oligosaccharides

Ultra-high-performance liquid chromatography (UHPLC) with charge transfer dissociation mass spectrometry (CTD-MS) is presented for the analysis of a mixture of complex sulfated oligosaccharides. The mixture contained kappa (κ), iota (ι), and lambda (λ) carrageenans that contain anhydro bridges, different degrees of sulfation ranging from one to three per dimer, different positioning of the sulfate groups along the backbone, and varying degrees of polymerization (DP) between 4 and 12. Optimization studies using standard mixtures of carrageenans helped establish the optimal conditions for online UHPLC-CTD-MS/MS analysis. Optimization included (1) UHPLC conditions; (2) ion source conditions, such as the capillary voltage, drying gas and nebulizing gas temperature, and flow rate; and (3) CTD-MS conditions, including data-dependent CTD-MS. The UHPLC-CTD results were contrasted with UHPLC-CID results of the same mixture on the same instrument. Whereas CID tends to produce B/Y and C/Z ions with many neutral losses, CTD produced more abundant A/X ions and less abundant neutral losses, which enabled more confident structural detail. The results demonstrate that He-CTD is compatible with the timescale of UHPLC and provides more structural information about carrageenans compared to state-of-the-art methods like UHPLC-CID analysis.