Does pterygomaxillary disjunction in surgically assisted rapid maxillary expansion influence upper airway volume? A prospective study using Dolphin Imaging 3D

Evaluation of Cement Remaining After Debonding and Polishing in Lingual Multibracket Appliance Using Planning Imaging 3D Software

BACKGROUND

The aim of the present study was to assess the accuracy, repeatability and reproducibility of a novel digital technique to analyze the remaining cement after debonding lingual multibracket appliances and after polishing the remaining cement.

METHODS

Thirteen teeth were embedded in an epoxy resin simulating a dental arch and subsequently a digital impression was taken using an intraoral scanner; obtaining a standard tessellation language (STL1) digital file. Lingual multibracket appliances were bonded and debonded on the lingual surfaces of all teeth and another digital impression was made (STL2). Finally, the polishing procedure of the remaining cement was performed and a digital impression was taken (STL3). The teeth were individually segmented from the digital files and an alignment was performed between STL1 and STL2 and between STL1 and STL3 digital files using specific cephalometric 2D/3D software to assess the remaining cement after debonding and after polishing lingual multibracket appliances. The reproducibility and repeatability capacity of the measurement digital method was assessed using a Gage R&R statistical analysis.

RESULTS

The results were assessed by a statistical program and showed a statistically significant (p < 0.001) decrease in weight, thickness, and height of the cement remaining after polishing, with a mean decrease of 2.09 mm in width (X plane), 0.12 mm in thickness (Y plane), and 1.87 mm in height (Z plane).

CONCLUSIONS

The use of novel digital diagnosis software is a repeatable, reproducible, and accurate measurement technique to analyze the remaining cement after debonding lingual multibracket appliances and after polishing the remaining cement.

PRACTICAL IMPLICATIONS

The diagnosis cephalometric software evaluation of the polishing technique with different materials, burs or polishing sequences brings the research closer to the clinical field. This methodology allows the orthodontist to clinically measure the cement remnants after polishing without the need for teeth extraction and with current clinic objects such as intraoral scanning and orthodontic cephalometric software. This might give orthodontics more clearance in terms of better burs or protocols for polishing.

Evaluation of pterygomaxillary disjunction on skeletal and dental changes after surgically assisted rapid maxillary expansion: A systematic review and meta-analysis

Background

Surgically assisted rapid maxillary expansion (SARME) with disjunction of the pterygomaxillary suture is a procedure widely used in maxillofacial surgery. However, the pterygomaxillary disjunction (PD) procedure has often been deemed risky. The actual necessity and effectiveness of PD in SARME remain subjects of debate, with some studies suggesting that sufficient expansion can be achieved without it. This systematic review with meta-analysis aimed to evaluate the scientific literature regarding the effects of PD on skeletal and dental changes after SARME.

Methods

The systematic review followed the Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) guidelines to identify relevant articles published in different databases. The study conducted a comprehensive literature search across seven databases: PubMed/Medline, Web of Science, Science Direct, Scopus, Embase, Cochrane Collaboration Library, and Google Scholar. The selected studies evaluated the effect of the extent of expansion and the stability of SARME with PD, as well as the skeletal and dental changes associated with the treatment. The intervention cohorts within the sampled population chosen for incorporation into our analysis consisted of individuals who underwent SARME accompanied by PD, whereas the control group underwent SARME devoid of PD. Data were combined in a meta-analysis using the Review Manager 5.3.5. (RevMan) program. A systematic search was performed in seven databases (PubMed/Medline, Web of Science, Science Direct, Scopus, Embase, Cochrane Collaboration Library, and Google Scholar).

Results

After applying the selection criteria, seven articles were included in the systematic review, totaling 291 patients. Five articles were selected for meta-analysis. A meta-analysis was conducted to assess the effects of anterior and posterior dental expansions. After applying the selection criteria, seven articles were included in the systematic review, totaling 291 patients. Five articles were selected for meta-analysis. A meta-analysis was conducted to assess the effects of anterior and posterior dental expansions. Expansion in the previous region was slightly higher in the SARME with PD group compared to the PD-free group (95 % CI: 1.07 to 1.1 mm; p = 0.98). In the posterior region, expansion exceeding 0.11 mm was observed in the SARME with PD group compared to the PD-free group, but without statistical significance (95 % CI: 1.64 to 1.86 mm; p = 0.903).

Conclusion

SARME combined with PD proves to be an effective surgical procedure for correcting transverse maxillary deficiencies. However, no statistically significant differences were observed when SARME with and without PD was compared, indicating that SARME with PD can be used especially in cases that require expansion in the posterior region of the maxilla.

Effects of minimally invasive surgical and miniscrew-assisted rapid palatal expansion (MISMARPE) on the nasal cavity and upper airway: a comparative cohort study

This study was performed to evaluate the impact on the upper airway and nasal cavity of a new minimally invasive surgical and miniscrew-assisted rapid palatal expansion (MISMARPE) technique for the treatment of adult patients with transverse maxillary deficiency, in comparison to surgically assisted rapid palatal expansion (SARPE). Computed tomography scans of 21 MISMARPE and 16 SARPE patients were obtained preoperatively (T0) and at the end of the activation period (T1) and analysed. Linear and volumetric measurements were performed in the dental, alveolar, nasal cavity, and oropharynx regions. Generalised estimating equations were used to consider the intervention time and surgery type, and their interaction. In both groups, measurements were increased at T1 (P < 0.001), except for oropharynx volume (P > 0.05). A greater expansion in nasal cavity floor and median palatal suture was shown for MISMARPE when compared to SARPE (P < 0.001), with the same degree of expander activation (P = 0.094). A trapezoidal (coronal plane) and 'V' shape (axial plane) expansion pattern, was observed after MISMARPE. Both surgical techniques were effective for maxillary expansion in adults. However, MISMARPE was performed without osteotomy of the pterygomaxillary suture, in an outpatient setting and with local anaesthesia.

Can different osteotomies have an influence on surgically assisted rapid maxillary expansion? A systematic review

The purpose of this study was to systematically review the randomized and non-randomized clinical trials (RCT; nRCT) concerning the different available osteotomies for surgically assisted rapid maxillary expansion (SARME): pterygomaxillary disjunction (SARME + PD vs SARME-PD) and segmental Le Fort I osteotomy (2-piece vs 3-piece). Outcomes focused on skeletal, dental, upper airway changes, complications, and relapse. Two authors investigated five databases (PubMed, Cochrane Library, Google Scholar, Scopus, Web of Science) until August 2023. The Cochrane Collaboration Tool and the Newcastle-Ottawa scale were used for the quality assessment of the included RCTs and nRCTs, respectively. A total of 554 articles were retrieved and after duplicates removing and full-text reading, 40 studies were included. Two RCTs showed a low risk of bias, one an unclear risk and one a high risk. Among the non-RCTs, 15 studies showed a good quality, while 21 exhibited a fair quality score. SARME + PD resulted in more homogeneous posterior bone expansion, with minimal dental effects. No difference between 2-piece and 3-piece in asymmetric expansion was observed, although 3SO showed 1-2 mm of more transverse increase. The oropharynx minimum cross-sectional area, the nasopharynx and the oropharynx volume were greater in SARME + PD. Both dental and bone relapse can occur but no differences between the groups were observed. All osteotomies guaranteed a correction of transverse maxillary deficiency. Lower side effects were described in SARME + PD. Two-piece and 3-piece segmental Le Fort I osteotomies did not show any differences in the symmetry and amount of expansion.

Cone beam computed tomography volumetric airway changes after orthognathic surgery: a systematic review

The aim of this systematic review was to provide a structured overview of three-dimensional airway volume changes in relation to various orthognathic surgeries. Clinical human studies performing pre- and postoperative three-dimensional airway volume assessments to investigate volumetric changes of the airway after orthognathic surgery were included. Pre-determined inclusion and exclusion criteria were applied in an extensive search of the PubMed, Embase, and Web of Science electronic databases. The cut-off date was set to January 1, 2022. Forty-one articles reporting retrospective and prospective case-control and case series studies were included. All studies were determined to be of medium quality (moderate risk of bias). The included studies were categorized by type of intervention. Pre- and postoperative volumes were extracted from the available data, and volume changes as a percentage of the preoperative levels were calculated. Isolated mandibular setback surgery generally decreased the airway volume. Isolated maxillary or mandibular advancement, bimaxillary advancement, and surgically assisted maxillary expansion generally increased the airway volume in the total airway and oropharynx, among which the effect of bimaxillary advancement surgery appeared most significant. High heterogeneity exists in the terminology and definitions of the airway and its segments. A more uniform methodology for airway volume measurement is needed to provide an insight into the impact on the airway of specific types of surgical intervention. In conclusion, airway volumes are affected after orthognathic surgery, which may be of clinical significance, especially in patients who are predisposed to obstructive sleep apnoea.

A Replicable and Reproducible Digital Method for Quantifying Maxillary Sinus Airway Changes after Sinus Lifts Using the Lateral Window Approach Technique-A Retrospective Study

In the present retrospective study, we aimed to assess the replicability and reproducibility of a novel digital measurement technique for analyzing the volumes of the left and right maxillary sinuses and the nasal and maxillary sinus airway complex after a sinus lift procedure using the lateral window approach, to provide an accurate measurement technique for easily applying in clinical practice and to allow pre-operative assessment of maxillary sinus lift surgery, avoiding complications and making surgery more predictable. Material and Methods: Thirty patients with partially edentulous posterior maxilla were selected and submitted to bilateral sinus lift using the lateral window approach technique, with grafting materials selected and submitted to cone beam computed tomography (CBCT) scans, both pre- and postoperatively. Then, datasets were uploaded to therapeutic digital planning software to measure the volume of the right and left maxillary sinuses and the nasal and maxillary sinus airway complex. Gage R&R statistical analysis was performed to assess the replicability and reproducibility of the digital measurement technique. Results: The variability attributable to the novel digital measurement technique was 3.4% for replicability and 3.4% for reproducibility of the total variability of the samples. Conclusion: The novel digital method proposed is a replicable and reproducible technique for analyzing the volume of the right and left maxillary sinuses and the nasal and maxillary sinus airway complex after a sinus lift using the lateral window approach technique, allowing an accurate pre-operative assessment of maxillary sinus lift surgery, avoiding complications and making surgery more predictable.

Evaluation of the Average Nasal and Nasopharyngeal Volume in 10-13-year-old Children: A Preliminary CBCT Study

Aim and objective

Mouth breathing is one of the most common deleterious habits prevalent in children which leads to various skeletal and dental malocclusions. Due to the close relationship between nasal and nasopharyngeal cavity volume and maxilla, transverse maxillary deficiency causes reduced nasal and nasopharyngeal cavity volume leading to mouth breathing. Therefore, knowledge of average nasal and nasopharyngeal cavity volume is essential to accurately diagnose mouth breathing and to evaluate underlying causative factors.

Materials and methods

Cone-beam computed tomographic scans of 60 children were taken and nasal cavity and nasopharyngeal volumes were calculated using Planmeca Romexis 5.2.0.R software. Average volumes were computed using predetermined landmarks and compared among gender.

Results

The nasal cavity and nasopharyngeal volume showed significant differences among the gender (p value < 0.001 and 0.018, respectively).

Conclusion and clinical significance

Knowledge of the average nasal and nasopharyngeal cavity volumes can be a useful diagnostic aid for mouth breathing patients and also assess the causative factors and treatment outcomes in these patients.

How to cite this article

Kalaskar R, Balasubramanian S, Kalaskar A. Evaluation of the Average Nasal and Nasopharyngeal Volume in 10–13-year-old Children: A Preliminary CBCT Study. Int J Clin Pediatr Dent 2021;14(2):187–191.

Does Nasal Cavity Enlargement Associated With Respiratory Function Improvement After Surgically Assisted Rapid Maxillary Expansion?

PURPOSE

To systematically evaluate the effects of surgically assisted rapid maxillary expansion (SARME) on nasal cavity and its associated respiratory function changes.

MATERIAL AND METHODS

Multiple electronic databases were searched, authors were contacted as required, and reference lists of potentially relevant studies were screened. Articles that included patients older than 16 who had received SARME were considered. Data extraction and quality assessment were performed independently and in duplicate.

RESULTS

Eight articles, including 161 patients, were finally selected and analyzed. Nasal cavity significantly augmentation after SARME has been recognized by 7 studies with moderate-quality evidence. Among them, the nasal cavity volume increased <20% in 4 studies, 20% to 40% in 1 study, and >40% in 2 studies. Totally, the range of increasing in nasal cavity volume was 7.6% to 99%. One study had recorded the nasal expiratory and inspiratory flow significantly increased 18.5% and 21.7%, respectively.

CONCLUSION

SARME was found to produce meaningful volume augmentation in nasal cavity with adult patients. However, the improvement of nasal respiratory function has not been well elucidated; thus, SARME is not yet recommended for the purpose of improving nasal respiratory.

A comparison of tooth-borne and bone-anchored expansion devices in SARME

PURPOSE

Major adult maxillary transverse discrepancies are usually treated with surgically assisted rapid maxillary expansion (SARME), utilizing a combination of surgical and orthodontic techniques. Unfortunately, a consensus has not been reached on topics ranging from the best surgical technique that should be performed to the ideal expander type that should be installed. The present study sought to evaluate the efficiency and stability of the maxillary expansion achieved with two types of expanders following the same SARME procedure without pterygomaxillary disjunction (PMD).

METHODS

Twenty-four patients with a maxillary transverse deficiency were enrolled in the study. All patients underwent the same SARME, and 12 received a bone-anchored (KLS Martin®) and 12 were installed with a tooth-borne (Hyrax®) expander. Dental impressions were collected both preoperatively and 1 year postoperatively. These casts were scanned and the distances between specific interdental and intergingival points were measured and analyzed. Statistical analyses were performed to assess the effects expander type had on the efficiency of the maxillary expansion and long-term stability.

RESULTS

Expansion in the anterior maxillary and premolar regions was found to be similar in both groups. In contrast, the tooth-borne device resulted in a significantly greater expansion in the molar region.

CONCLUSION

The SARME technique without PMD is highly effective at treating adults with maxillary transverse deficiencies, and the type of expander selected depends on the location of the larger maxillary constriction region of each patient.