Microencapsulated SLN: An innovative strategy for pulmonary protein delivery

Modified-Release Pulmonary Delivery Systems for Labile Bioactives: Design, Development, and Applications

Pulmonary delivery of bioactives has shown to be a promising route for the treatment of respiratory conditions, however, numerous physiological barriers, such as mucociliary clearance and immune responses, pose significant hurdles to treatment efficacy. These barriers specifically affect labile bioactives such as mRNA, peptides, proteins, and probiotics, which are susceptible to degradation due to the prevailing conditions. Various drug delivery platforms have been developed to address these challenges, including, among others, polymeric nanoparticles, micelles, liposomes, and solid lipid nanoparticles that encapsulate and protect the labile bioactives during formulation and administration, enabling improved bioavailability, sustained release, and enhanced formulation stability, while further modification of these platforms allows for targeted drug delivery. This review explores the advanced drug delivery systems that have been designed to protect and release labile active agents in a controlled and targeted manner to the lung, with a specific focus provided on the physiological barriers to effective pulmonary delivery and the formulation considerations to overcome these challenges. The outlook of this pertinent field of study has additionally been provided, highlighting the significant potential of the pulmonary delivery of labile bioactive agents for the prevention and treatment of a variety of respiratory ailments.

Optimization and evaluation of a chitosan-coated PLGA nanocarrier for mucosal delivery of Porphyromonas gingivalis antigens

Recent advances in understanding Alzheimer's disease (AD) suggest the possibility of an infectious etiology, with Porphyromonas gingivalis emerging as a prime suspect in contributing to AD. P. gingivalis may invade systemic circulation via weakened oral/intestinal barriers and then cross the blood-brain barrier (BBB), reaching the brain and precipitating AD pathology. Based on the proposed links between P. gingivalis and AD, a prospective approach is the development of an oral nanovaccine containing P. gingivalis antigens for mucosal delivery. Targeting the gut-associated lymphoid tissue (GALT), the nanovaccine may elicit both mucosal and systemic immunity, thereby hampering P. gingivalis ability to breach the oral/intestinal barriers and the BBB, respectively. The present study describes the optimization, characterization, and in vitro evaluation of a candidate chitosan-coated poly(lactic-co-glycolic acid) (PLGA-CS) nanovaccine containing a P. gingivalis antigen extract. The nanocarrier was prepared using the double emulsion solvent evaporation method and optimized for selected experimental factors, e.g. PLGA amount, surfactant concentration, w1/o phase ratio, applying a d-optimal statistical design to target the desired physicochemical criteria for its intended application. After nanocarrier optimization, the nanovaccine was characterized in terms of particle size, polydispersity index (PdI), ζ-potential, encapsulation efficiency (EE), drug loading (DL), morphology, and in vitro release profile, as well as for mucoadhesivity, stability under simulated gastrointestinal conditions, antigen integrity, in vitro cytotoxicity and uptake using THP-1 macrophages. The candidate PLGA-CS nanovaccine demonstrated appropriate physicochemical, mucoadhesive, and antigen release properties for oral delivery, along with acceptable levels of EE (55.3 ± 3.5 %) and DL (1.84 ± 0.12 %). The integrity of the encapsulated antigens remained uncompromised throughout NPs production and simulated gastrointestinal exposure, as confirmed by SDS-PAGE and Western blotting analyses. Furthermore, the nanovaccine showed effective in vitro uptake, while exhibiting low cytotoxicity. Taken together, these findings underscore the potential of PLGA-CS NPs as carriers for adequate antigen mucosal delivery, paving the way for further investigations into their applicability as vaccine candidates against P. gingivalis.

Solid Lipid Nanoparticles for Pulmonary Delivery of Biopharmaceuticals: A Review of Opportunities, Challenges, and Delivery Applications

Biopharmaceuticals such as nucleic acids, proteins, and peptides constitute a new array of treatment modalities for chronic ailments. Invasive routes remain the mainstay of administering biopharmaceuticals due to their labile nature in the biological environment. However, it is not preferred for long-term therapy due to the lack of patient adherence and clinical suitability. Therefore, alternative routes of administration are sought to utilize novel biopharmaceutical therapies to their utmost potential. Nanoparticle-mediated pulmonary delivery of biologics can facilitate both local and systemic disorders. Solid lipid nanoparticles (SLNs) afford many opportunities as pulmonary carriers due to their physicochemical stability and ability to incorporate both hydrophilic and hydrophobic moieties, thus allowing novel combinatorial drug/gene therapies. These applications include pulmonary infections, lung cancer, and cystic fibrosis, while systemic delivery of biomolecules, like insulin, is also attractive for the treatment of chronic ailments. This Review explores physiological and particle-associated factors affecting pulmonary delivery of biopharmaceuticals. It compares the advantages and limitations of SLNs as pulmonary nanocarriers along with design improvements underway to overcome these limitations. Current research illustrating various SLN designs to deliver proteins, peptides, plasmids, oligonucleotides, siRNA, and mRNA is also summarized.

Inhalable Nanoparticle-based Dry Powder Formulations for Respiratory Diseases: Challenges and Strategies for Translational Research

The emergence of novel respiratory infections (e.g., COVID-19) and expeditious development of nanoparticle-based COVID-19 vaccines have recently reignited considerable interest in designing inhalable nanoparticle-based drug delivery systems as next-generation respiratory therapeutics. Among various available devices in aerosol delivery, dry powder inhalers (DPIs) are preferable for delivery of nanoparticles due to their simplicity of use, high portability, and superior long-term stability. Despite research efforts devoted to developing inhaled nanoparticle-based DPI formulations, no such formulations have been approved to date, implying a research gap between bench and bedside. This review aims to address this gap by highlighting important yet often overlooked issues during pre-clinical development. We start with an overview and update on formulation and particle engineering strategies for fabricating inhalable nanoparticle-based dry powder formulations. An important but neglected aspect in in vitro characterization methodologies for linking the powder performance with their bio-fate is then discussed. Finally, the major challenges and strategies in their clinical translation are highlighted. We anticipate that focused research onto the existing knowledge gaps presented in this review would accelerate clinical applications of inhalable nanoparticle-based dry powders from a far-fetched fantasy to a reality.

Engineering of inhalable nano-in-microparticles for co-delivery of small molecules and miRNAs

In this study, novel Trojan particles were engineered for direct delivery of doxorubicin (DOX) and miR-34a as model drugs to the lungs to raise local drug concentration, decrease pulmonary clearance, increase lung drug deposition, reduce systemic side effects, and overcome multi-drug resistance. For this purpose, targeted polyelectrolyte nanoparticles (tPENs) developed with layer-by-layer polymers (i.e., chitosan, dextran sulfate, and mannose-g-polyethyleneimine) were spray dried into a multiple-excipient (i.e., chitosan, leucine, and mannitol). The resulting nanoparticles were first characterized in terms of size, morphology, in vitro DOX release, cellular internalization, and in vitro cytotoxicity. tPENs showed comparable cellular uptake levels to PENs in A549 cells and no significant cytotoxicity on their metabolic activity. Co-loaded DOX/miR-34a showed a greater cytotoxicity effect than DOX-loaded tPENs and free drugs, which was confirmed by Actin staining. Thereafter, nano-in-microparticles were studied through size, morphology, aerosolization efficiency, residual moisture content, and in vitro DOX release. It was demonstrated that tPENs were successfully incorporated into microspheres with adequate emitted dose and fine particle fraction but low mass median aerodynamic diameter for deposition into the deep lung. The dry powder formulations also demonstrated a sustained DOX release at both pH values of 6.8 and 7.4.

Microfluidic production of mRNA-loaded lipid nanoparticles for vaccine applications

INTRODUCTION

During past years, lipid nanoparticles (LNPs) have emerged as promising carriers for RNA delivery, with several clinical trials focusing on both infectious diseases and cancer. More recently, the success of messenger RNA (mRNA) vaccines for the treatment of severe diseases such as acute respiratory syndrome coronavirus 2 (SARS-CoV-2), is partially justified by the development of LNPs encapsulating mRNA for efficient cytosolic delivery.

AREAS COVERED

This review examines the production and formulation of LNPs by using microfluidic devices, the status of mRNA-loaded LNPs therapeutics and explores spray drying process, as a promising dehydration process to enhance LNP stability and provide alternative administration routes.

EXPERT OPINION

Microfluidic techniques for preparation of LNPs based on organic solvent injection method promotes the generation of stable, uniform, and monodispersed nanoparticles enabling higher encapsulation efficiency. In particular, the application of microfluidics for the fabrication of mRNA-loaded LNPs is based on rapid mixing of small volumes of ethanol solution containing lipids and aqueous solution containing mRNA. Control of operating parameters and formulation has enabled the optimization of nanoparticle physicochemical characteristics and encapsulation efficiency.

Benzo[k,l]xanthene Lignan-Loaded Solid Lipid Nanoparticles for Topical Application: A Preliminary Study

Skin is the first human barrier that is daily exposed to a broad spectrum of physical and chemical agents, which can increase reactive oxygen species (ROS) and lead to the formation of topical disorders. Antioxidant molecules, such as benzo[k,l]xanthene lignans (BXL), are ideal candidates to eliminate or minimize the effects of ROS. Herein, we aimed to formulate BXL-loaded solid lipid nanoparticles (SLN-BXL) to improve the bioavailability and interaction with the skin, and also to investigate the protective impact against intracellular ROS generation in HFF-1 in comparison with the drug-free situation. SLN-BXL were formulated using the PIT/ultrasonication method, and then were subjected to physicochemical characterizations, i.e., average size, zeta potential (ZP), polydispersity index (PDI), encapsulation efficiency (%EE), thermotropic behavior, and interaction with a biomembrane model. The results show a mean size around 200 nm, PDI of 0.2, and zeta potential of about -28 mV, with values almost unchanged over a period of three months, while the EE% is ≈70%. Moreover, SLN-BXL are able to deeply interact with the biomembrane model, and to achieve a double-action release in mildly hydrophobic matrices; the results of the in vitro experiments confirm that SLN-BXL are cell-safe and capable of attenuating the IL-2-induced high ROS levels. In conclusion, based on our findings, the formulation can be proposed as a candidate for a preventive remedy against skin disorders induced by increased levels of ROS.

Investigation of the potential therapeutic effect of cationic lipoplex mediated fibroblast growth factor-2 encoding plasmid DNA delivery on wound healing

BACKGROUND

Developing an alternative and efficient therapy for wound healing has been an important research topic for pharmaceutical sciences. A straightforward but effective system for delivering fibroblast growth factor-2 (FGF-2) encoding plasmid DNA (pFGF-2) for wound healing therapy was aimed to develop in this study.

METHODS

In order to provide the delivery of pFGF-2, a delivery vector, namely, cationic lipid nanoparticle (cLN) was developed by the melt-emulsification process, complexed with pFGF-2 to form a lipoplex system and further characterized. The pFGF-2 binding and protecting ability of lipoplexes were evaluated. The cytotoxicity and transfection efficiency of the lipoplexes, FGF-2 expression levels, and in vitro wound healing ability have been investigated on the L929 fibroblast cell line.

RESULTS

The obtained lipoplex system has a particle size of 88.53 nm with a low PDI (0.185), and zeta potential values of 27.8 mV with a spherical shape. The ability of cLNs to bind pFGF-2 and protect against nucleases was demonstrated by gel retardation assay. Furthermore, the developed FGF-2 carrying lipoplexes system showed significant transfection and FGF-2 expression ability comparing naked plasmid. Finally, scratch assay revealed that the developed system is able to promote in vitro cell proliferation/migration in 48 h.

CONCLUSION

Promising results have been achieved with the use of lipoplexes carrying pFGF-2, and this approach could be considered as a potentially applicable concept for the future gene-based wound healing therapies.

Particle engineering principles and technologies for pharmaceutical biologics

The global market of pharmaceutical biologics has expanded significantly during the last few decades. Currently, pharmaceutical biologic products constitute an indispensable part of the modern medicines. Most pharmaceutical biologic products are injections either in the forms of solutions or lyophilized powders because of their low oral bioavailability. There are certain pharmaceutical biologic entities formulated into particulate delivery systems for the administration via non-invasive routes or to achieve prolonged pharmaceutical actions to reduce the frequency of injections. It has been well documented that the design of nano- and microparticles via various particle engineering technologies could render pharmaceutical biologics with certain benefits including improved stability, enhanced intracellular uptake, prolonged pharmacological effect, enhanced bioavailability, reduced side effects, and improved patient compliance. Herein, we review the principles of the particle engineering technologies based on bottom-up approach and present the important formulation and process parameters that influence the critical quality attributes with some mathematical models. Subsequently, various nano- and microparticle engineering technologies used to formulate or process pharmaceutical biologic entities are reviewed. Lastly, an array of commercialized products of pharmaceutical biologics accomplished based on various particle engineering technologies are presented and the challenges in the development of particulate delivery systems for pharmaceutical biologics are discussed.

Development and Evaluation of Solid Witepsol Nanoparticles for Gene Delivery

Objectives

Gene therapy approaches have become increasingly attractive in the medical, pharmaceutical, and biotechnological industries due to their applicability in the treatment of diseases with no effective conventional therapy. Non-viral delivery using cationic solid lipid nanoparticles (cSLNs) can be useful to introduce large nucleic acids to target cells. A careful selection of components and their amounts is critical to obtain a successful delivery system. In this study, solid Witepsol nanoparticles were formulated, characterized, and evaluated in vitro for gene delivery purposes.

Materials and Methods

Solid Witepsol nanoparticles were formulated through the microemulsion dilution technique using two grades of Witepsol and three surfactants, namely Cremephor RH40, Kolliphor HS15, and Peceol. Dimethyldioctadecylammonium bromide was incorporated into the system as a cationic lipid. Twelve combinations of these ingredients were formulated. The obtained nanoparticles were then evaluated for particle size, zeta potential, DNA binding and protection ability, cytotoxicity, and transfection ability.

Results

Particle sizes of the prepared cationic cSLNs were between 13.43±0.06 and 68.80±0.78 nm. Their zeta potential, which is important for DNA binding efficiency, was determined at >+40 mV. Gel retardation assays revealed that the obtained cSLNs can form a compact complex with plasmid DNA (pDNA) encoding green fluorescent protein and that this complex can protect pDNA from DNase I-mediated degradation. Cytotoxicity evaluation of nanoparticles was performed on the L929 cell line. In vitro transfection data revealed that solid Witepsol nanoparticles could effectively transfect fibroblasts.

Conclusion

Our findings indicate that solid Witepsol nanoparticles prepared using the microemulsion dilution technique are promising non-viral delivery systems for gene therapy.

Camelina lipid droplets as skin delivery system promotes wound repair by enhancing the absorption of hFGF2

Human basic fibroblast growth factor (hFGF2) is widely recognized for accelerating skin wound healing in both animal models and randomized clinical trials. However, the low skin permeation and bioavailability of hFGF2 remain the most limiting factors in the pharmacological application. For the first time, Camelina Lipid Droplets (CLD) delivery system was displayed important virtue, by promoting the skin absorption of hFGF2, which is a key factor that accelerates the skin wound repair, and provide a new alternative for skin therapy. In this study, we used the CLD as a safer material to prepare the nanoparticles, which were characterized by size and morphology. Our data revealed that particle sizes of Camelina Lipid Droplets linked to hFGF2 (CLD-hFGF2) were around 133.5 nm; it also displayed that the complex of CLD-hFGF2 penetrates the skin barrier in deeper than an individual hFGF2. This suggests that once the hFGF2 is fixed onto the surface of CLD, it can cross the stratum corneum and play a therapeutic role into the dermis. Furthermore, we demonstrated that CLD-hFGF2 enhances fibroblast migration, and significantly improves skin regeneration for accelerating wound healing without any significant toxicity. This paper highlights the importance of CLD as an emerging delivery system; it is also providing a new and applicable therapeutic research direction through enhancing the skin permeation of hFGF2 to accelerate wound healing.

In Silico and In Vitro Tailoring of a Chitosan Nanoformulation of a Human Metabolic Enzyme

Enzyme nanoencapsulation holds an enormous potential to develop new therapeutic approaches to a large set of human pathologies including cancer, infectious diseases and inherited metabolic disorders. However, enzyme formulation has been limited by the need to maintain the catalytic function, which is governed by protein conformation. Herein we report the rational design of a delivery system based on chitosan for effective encapsulation of a functionally and structurally complex human metabolic enzyme through ionic gelation with tripolyphosphate. The rationale was to use a mild methodology to entrap the multimeric multidomain 200 kDa human phenylalanine hydroxylase (hPAH) in a polyol-like matrix that would allow an efficient maintenance of protein structure and function, avoiding formulation stress conditions. Through an in silico and in vitro based development, the particulate system was optimized with modulation of nanomaterials protonation status, polymer, counterion and protein ratios, taking into account particle size, polydispersity index, surface charge, particle yield production, protein free energy of folding, electrostatic surface potential, charge, encapsulation efficiency, loading capacity and transmission electron microscopy morphology. Evaluation of the thermal stability, substrate binding profile, relative enzymatic activity, and substrate activation ratio of the encapsulated hPAH suggests that the formulation procedure does not affect protein stability, allowing an effective maintenance of hPAH biological function. Hence, this study provides an important framework for an enzyme formulation process.

Effect of α-tocopherol on the physicochemical, antioxidant and antibacterial properties of levofloxacin loaded hybrid lipid nanocarriers

Non-toxic hybrid lipidic nanoparticles become a promising tool for enhanced lung delivery of levofloxacin in combination with antioxidant properties.

Nanoparticle-mediated macrophage targeting-a new inhalation therapy tackling tuberculosis

Despite the potent clinical efficacy of linezolid (LNZ) against drug-resistant tuberculosis, its safety and tolerability remain of major concern. Our objective is to develop antitubercular inhalable LNZ nano-embedded microparticles. In this context, LNZ incorporated in non-structured lipid carriers (NLCs) was characterized in terms of colloidal, morphological, thermal, and release profiles. The potential of LNZ-NLCs to cross mucosal barriers and invade alveolar macrophages (AM, MH-S cells) was appraised. In vivo proof of concept was accomplished via orotracheal administration to mice. Respirable microparticles prepared by spray drying NLCs with diluents were assessed for their size, shape, flowability, aerosolization performance, and lung deposition pattern. NLCs (809-827 nm in size, zeta potential - 37.4 to - 58.9 mV) ensued 19% LNZ loading and pH-independent sustained release. Penetration studies revealed 73% LNZ crossing mucus within 1 h. Meanwhile, viability assay on A549 cells ensured an IC50 of 1.2 and 0.32 mg/mL for plain and LNZ-NLCs, respectively. CLSM confirmed phagocytosis of NLCs by MH-S macrophages, while H&E staining demonstrated NLC accumulation in murine AM in vivo with no signs of histopathological/biochemical changes. Bronchoalveolar lavage showed significantly low levels of LDH and total proteins (TP) for LNZ-NLCs highlighting their superior safety. Respirable microparticles embedding LNZ-NLCs ensured excellent aerosolization (MMAD 2 μm, FPF 93%) denoting perfect alveolar deposition. The developed inhalation therapy provided sustained LNZ release, mucus penetrability, potential safety in therapeutic doses, in vitro and in vivo macrophage targetability, and preferential deposition in the deep lung. Overall positive outcomes rely on reduced dose, dosing frequency, and per se superior safety circumventing systemic-associated life-threatening side effects. Graphical abstract.

Development Of Novel Liposome-Encapsulated Combretastatin A4 Acylated Derivatives: Prodrug Approach For Improving Antitumor Efficacy

Purpose

The objective of the present study was to develop a liposomal drug delivery system based on combretastatin A4 (CA4) prodrugs modified with varying alkyl chains and investigate the in vitro drug conversion from prodrug and in vivo antitumor effect.

Methods

The prodrug of CA4 was synthesized with stearyl chloride (18-carbon chain), palmitoyl chloride (16-carbon chain), myristoyl chloride (14-carbon chain), decanoyl chloride (10-carbon chain), and hexanoyl chloride (6-carbon chain) at the 3′-position of the CA4. Subsequently, it was encapsulated with liposomes through the thin-film evaporation method. Furthermore, the characteristics of prodrug-liposome were evaluated using in vitro drug release, conversion, and cytotoxicity assays, as well as in vivo pharmacokinetic, antitumor, and biodistribution studies.

Results

The liposome system with loaded CA4 derivatives was successfully developed with nano-size and electronegative particles. The rate of in vitro drug release and conversion was reduced as the fatty acid carbon chain lengthened. On the contrary, in vivo antitumor effects were improved with the enlargement of the fatty acid carbon chain. The results of the in vivo pharmacokinetic and tissue distribution studies indicated that the reduced rate of CA4 release with a long carbon chain could prolong the circulation time and increase the drug concentration in the tumor tissue.

Conclusion

These results suggested that the release or hydrolysis of the parent drug from the prodrug was closely related with the in vitro and in vivo properties. The slow drug release of CA4 modified with longer acyl chain could prolong the circulation time and increase the concentration of the drug in the tumor tissue. These effects play a critical role in increasing the antitumor efficacy.

Recent Advancements in Non-Invasive Formulations for Protein Drug Delivery

Advancements in biotechnology and protein engineering expand the availability of various therapeutic proteins including vaccines, antibodies, hormones, and growth factors. In addition, protein drugs hold many therapeutic advantages over small synthetic drugs in terms of high specificity and activity. This has led to further R&D investment in protein-based drug products and an increased number of drug approvals for therapeutic proteins. However, there are many biological and biopharmaceutical obstacles inherent to protein drugs including physicochemical and enzymatic destabilization, which limit their development and clinical application. Therefore, effective formulations of therapeutic proteins are needed to overcome the various physicochemical and biological barriers. In current medical practice, protein drugs are predominantly available in injectable formulations, which have disadvantages including pain, the possibility of infection, high cost, and low patient compliance. Consequently, non-invasive drug delivery systems for therapeutic proteins have gained great attention in the research and development of biomedicines. Therefore, this review covers the various formulation approaches to optimizing the delivery properties of protein drugs with an emphasis on improving bioavailability and patient compliance. It provides a comprehensive update on recent advancements in nanotechnologies with regard to non-invasive protein drug delivery systems, which is also categorized by the route of administrations including oral, nasal, transdermal, pulmonary, ocular, and rectal delivery systems.

Losartan-chitosan/dextran sulfate microplex as a carrier to lung therapeutics: Dry powder inhalation, aerodynamic profile and pulmonary tolerability

This study aims to obtain an inhalation powder with meaningful aerodynamic and safety profiles for the lung delivery of losartan (LS). For this, the capacity of self-assembly of chitosan (CS) and dextran sulfate (DS) to form CS/DS microplex (MC), incorporating high payload of hydrophilic LS was harnessed. Dry powder inhaler (LS-MC-DPI), prepared via spray drying of the best achieved LS-MC, was proposed to impart precise engineered inhalation characteristics. Micrometric robust CS/DS MC was revealed to offer the opportunity to heighten LS encapsulation, accounting for ~75%. LS-MC-DPI was successfully developed with high yield, flowability, respirable aerodynamic size and morphology which formed swellable and mucoadhesive network, facilitating intra-pulmonary delivery. Moreover, sustained release pattern, augmented deep lung deposition and safe histological profile were realized. Overall, the newly developed LS-MC DPI shows promises as an inhalation system. The aerodynamic performance and safety of LS-MC-DPI verify its suitability for further in vivo lung therapeutics.

Transfection of pulmonary cells by stable pDNA-polycationic hybrid nanostructured particles

AIM

Cationically modified solid lipid nanoparticles (SLN) were investigated as plasmid DNA (pDNA) carriers and transfection agents for the pulmonary route.

MATERIALS & METHODS

pDNA-loaded SLN were produced using glyceryl dibehenate or tristearate as matrix lipids and chitosan as surface charge modifier, and encapsulated by spray-drying in mannitol and trehalose microspheres.

RESULTS

Nanoparticles of 200 nm, and zeta potential around +15 mV were produced. Electrophorectic analysis confirmed plasmid stability and integrity. The pDNA-loaded SLN were able to transfect the Calu-3 and A549 pulmonary cell lines, while showing low cytotoxicity. Microencapsulation of SLN yielded dry powders suitable for inhalation that protected pDNA from degradation.

CONCLUSION

Microencapsulated SLN are a promising safe and effective carrier system for pulmonary gene delivery following pulmonary administration.

Exploring the Nano Spray-Drying Technology as an Innovative Manufacturing Method for Solid Lipid Nanoparticle Dry Powders

To take advantage of solid-state properties, the nano spray-drying (NSD) technique was investigated as an innovative one-step method to produce solid lipid nanoparticles (SLN) in the form of a dry powder starting from a lipid/leucine O/W emulsion. Compritol was chosen as wall-forming lipid. Rapamycin (Rp) was employed as a model drug to be loaded into SLN. Based on an initial screening, Lutrol F68 was chosen as surfactant and high-shear homogenization as an emulsification method. A two-level fractional factorial design and an extended factorial design were employed to determine critical factors and best preparation conditions. Compritol concentration, L-leucine/lipid ratio, and Lutrol F68 concentration resulted critical. Best conditions granted 51% yield, 3.2 μm L-leucine/SLN particle size, and a SLN population around 150 nm. All samples showed the presence of lipid aggregates. Material loss in the emulsification step was found responsible for SLN aggregation and low yield. The almost quantitative Rp loading increased SLN population span. Replacing compritol with cetyl palmitate produced aggregation of dry powders and SLN. Overall, NSD was found a fast method to produce SLN dry powders. More insightful assessment of the emulsification step and lipid property effects will be critical to the optimization of the NSD process. Hypotheses account for direct coupling of high-pressure homogenization with NSD for future successful development of this promising manufacturing method.

Lipid nanoparticles loading triptolide for transdermal delivery: mechanisms of penetration enhancement and transport properties

Background

In recent years, nanoparticles (NPs) including nanostructured lipid carries (NLC) and solid lipid nanoparticles (SLN) captured an increasing amount of attention in the field of transdermal drug delivery system. However, the mechanisms of penetration enhancement and transdermal transport properties of NPs are not fully understood. Therefore, this work applied different platforms to evaluate the interactions between skin and NPs loading triptolide (TPL, TPL-NLC and TPL-SLN). Besides, NPs labeled with fluorescence probe were tracked after administration to investigate the dynamic penetration process in skin and skin cells. In addition, ELISA assay was applied to verify the in vitro anti-inflammatory effect of TPL-NPs.

Results

Compared with the control group, TPL-NPs could disorder skin structure, increase keratin enthalpy and reduce the SC infrared absorption peak area. Besides, the work found that NPs labeled with fluorescence probe accumulated in hair follicles and distributed throughout the skin after 1 h of administration and were taken into HaCaT cells cytoplasm by transcytosis. Additionally, TPL-NLC could effectively inhibit the expression of IL-4, IL-6, IL-8, IFN-γ, and MCP-1 in HaCaT cells, while TPL-SLN and TPL solution can only inhibit the expression of IL-6.

Conclusions

TPL-NLC and TPL-SLN could penetrate into skin in a time-dependent manner and the penetration is done by changing the structure, thermodynamic properties and components of the SC. Furthermore, the significant anti-inflammatory effect of TPL-NPs indicated that nanoparticles containing NLC and SLN could serve as safe prospective agents for transdermal drug delivery system.