Release of the model drug SR101 from polyurethane nanocapsules in porcine hair follicles triggered by LED-derived low dose UVA light

The penetration efficiency of a dissolved model drug into hair follicles depends on the concentration of added nanoparticles

Hair follicles have recently emerged as promising drug delivery targets and gates for skin penetration. The so-called ratchet effect, which is based on an interaction between the hair shaft surface, the intrafollicular stratum corneum and nanoparticles, has proven to be very effective for the transport of active ingredients. Especially the nanoparticle-assisted decolonization of hair follicles constitutes an interesting new area of application. In a recently published work it was shown that small molecules as well as macromolecules solved in an outer phase of a formulation can be transported into the deeper parts of the hair follicles by adding nanoparticles to the formulation. In this case the nanoparticles constitute an entity independent of the drug and the transport is hypothesized to be based on an adhesion effect. In the present work, we focused on the impact of the particle concentration in the formulation on the transport efficiency of the model drug fluorescein sodium into hair follicles utilizing an ex vivo porcine skin model. It was observed that a particle concentration of 4% significantly enhances the transport efficiency of fluorescein as compared to 2% particle concentration. Doubling the concentration to 8% did not significantly increase the penetration depth. The effect evolved more efficiently when using 4 Hz circular motion massage as compared to 100 Hz oscillating massage. These results deliver interesting information on the optimal formulation as well as application parameters for a future application in clinical studies for e.g. skin antisepsis purposes.

Current issues in optical monitoring of drug delivery via hair follicles

Drug delivery via hair follicles has attracted much research attention due to its potential to serve for both local and systemic therapeutic purposes. Recent studies on topical application of various particulate formulations have demonstrated a great role of this delivery route for targeting numerous cell populations located in skin and transporting the encapsulated drug molecules to the bloodstream. Despite a great promise of follicle-targeting carriers, their clinical implementation is very rare, mostly because of their poorer characterization compared to conventional topical dosage forms, such as ointments and creams, which have a history spanning over a century. Gathering as complete information as possible on the intrafollicular penetration depth, storage, degradation/metabolization profiles of such carriers and the release kinetics of drugs they contain, as well as their impact on skin health would significantly contribute to understanding the pros and cons of each carrier type and facilitate the selection of the most suitable candidates for clinical trials. Optical imaging and spectroscopic techniques are extensively applied to study dermal penetration of drugs. Current paper provides the state-of-the-art overview of techniques, which are used in optical monitoring of follicular drug delivery, with a special focus on non-invasive in vivo methods. It discusses key features, advantages and limitations of their use, as well as provide expert perspectives on future directions in this field.

Progress in Topical and Transdermal Drug Delivery Research-Focus on Nanoformulations

Skin is the largest organ and a multifunctional interface between the body and its environment. It acts as a barrier against cold, heat, injuries, infections, chemicals, radiations or other exogeneous factors, and it is also known as the mirror of the soul. The skin is involved in body temperature regulation by the storage of fat and water. It is an interesting tissue in regard to the local and transdermal application of active ingredients for prevention or treatment of pathological conditions. Topical and transdermal delivery is an emerging route of drug and cosmetic administration. It is beneficial for avoiding side effects and rapid metabolism. Many pharmaceutical, technological and cosmetic innovations have been described and patented recently in the field. In this review, the main features of skin morphology and physiology are presented and are being followed by the description of classical and novel nanoparticulate dermal and transdermal drug formulations. The biophysical aspects of the penetration of drugs and cosmetics into or across the dermal barrier and their investigation in diffusion chambers, skin-on-a-chip devices, high-throughput measuring systems or with advanced analytical techniques are also shown. The current knowledge about mathematical modeling of skin penetration and the future perspectives are briefly discussed in the end, all also involving nanoparticulated systems.

Advanced Skin Antisepsis: Application of UVA-Cleavable Hydroxyethyl Starch Nanocapsules for Improved Eradication of Hair Follicle-Associated Microorganisms

Hair follicles constitute important drug delivery targets for skin antisepsis since they contain ≈25% of the skin microbiome. Nanoparticles are known to penetrate deeply into hair follicles. By massaging the skin, the follicular penetration process is enhanced based on a ratchet effect. Subsequently, an intrafollicular drug release can be initiated by various trigger mechanisms. Here, we present novel ultraviolet A (UVA)-responsive nanocapsules (NCs) with a size between 400 and 600 nm containing hydroxyethyl starch (HES) functionalized by an o-nitrobenzyl linker. A phase transfer into phosphate-buffered saline (PBS) and ethanol was carried out, during which an aggregation of the particles was observed by means of dynamic light scattering (DLS). The highest stabilization for the target medium ethanol as well as UVA-dependent release of ethanol from the HES-NCs was achieved by adding 0.1% betaine monohydrate. Furthermore, sufficient cytocompatibility of the HES-NCs was demonstrated. On ex vivo porcine ear skin, a strong UVA-induced release of the model drug sulforhodamine 101 (SR101) could be demonstrated after application of the NCs in cyclohexane using laser scanning microscopy. In a final experiment, a microbial reduction comparable to that of an ethanol control was demonstrated on ex vivo porcine ear skin using a novel UVA-LED lamp for triggering the release of ethanol from HES-NCs. Our study provides first indications that an advanced skin antisepsis based on the eradication of intrafollicular microorganisms could be achieved by the topical application of UVA-responsive NCs.

Kinetic Characteristics of Curcumin and Germacrone in Rat and Human Liver Microsomes: Involvement of CYP Enzymes

Curcumin and germacrone, natural products present in the Zingiberaceae family of plants, have several biological properties. Among these properties, the anti-NSCLC cancer action is noteworthy. In this paper, kinetics of the two compounds in rat liver microsomes (RLMs), human liver microsomes (HLMs), and cytochrome P450 (CYP) enzymes (CYP3A4, 1A2, 2E1, and 2C19) in an NADPH-generating system in vitro were evaluated by UP-HPLC–MS/MS (ultrahigh-pressure liquid chromatography–tandem mass spectrometry). The contents of four cytochrome P450 (CYP) enzymes, adjusting by the compounds were detected using Western blotting in vitro and in vivo. The t1/2 of curcumin was 22.35 min in RLMs and 173.28 min in HLMs, while 18.02 and 16.37 min were gained for germacrone. The Vmax of curcumin in RLMs was about 4-fold in HLMs, meanwhile, the Vmax of germacrone in RLMs was similar to that of HLMs. The single enzyme t1/2 of curcumin was 38.51 min in CYP3A4, 301.4 min in 1A2, 69.31 min in 2E1, 63.01 min in 2C19; besides, as to the same enzymes, t1/2 of germacrone was 36.48 min, 86.64 min, 69.31 min, and 57.76 min. The dynamic curves were obtained by reasonable experimental design and the metabolism of curcumin and germacrone were selected in RLMs/HLMs. The selectivities in the two liver microsomes differed in degradation performance. These results meant that we should pay more attention to drugs in clinical medication–drug and drug–enzyme interactions.

Preparation of Healable Shellac Microcapsules and Color-Changing Microcapsules and Their Effect on Properties of Surface Coatings on Hard Broad-Leaved Wood Substrates

In order to protect the wood surface and improve the properties of coatings, microcapsules with healable and discoloration functions are produced, and their healable function is obtained using shellac, which can be cured at room temperature, as the repairing agent. In this paper, self-made shellac microcapsules and color-changing microcapsules were added to varnish in different proportions to form the composite coating on a wood board, and the color difference of the coating was measured at different temperatures to study the influence of microcapsules on the degree of surface color on the substrate. The effect of microcapsules on the healable performance of coatings on a wood board was studied by scratching the surface of the coating with a utility knife and observing the process of repair. The optimal sample was selected from the orthogonal experiment for the independent experiment. The surface roughness, hardness, infrared spectrum, and scanning electron microscopy of the optimal sample were tested, and the content in the optimal sample was further investigated. The results show that color-changing microcapsules have a color-changing effect on surface coatings based on wood boards, and shellac microcapsules inhibit the color-changing effect of color-changing microcapsules. Composite microcapsules can repair the cracks on the surface coatings of wood boards. In cases where shellac microcapsules can self-repair the coating, the color-changing effect is best when the content of color-changing powder is 15.0%.

Hair follicle-targeting drug delivery strategies for the management of hair follicle-associated disorders

The hair follicle is not only a critical penetration route in percutaneous absorption but also has been recognized to be a target for hair follicle-associated disorders, such as androgenetic alopecia (AGA) and acne vulgaris. Hair follicle-targeting drug delivery systems allow for controlled drug release and enhance therapeutic efficacy with minimal side effects, exerting a promising method for the management of hair follicle-associated dysfunctions. Therefore, they have obtained much attention in several fields of research in recent years. This review gives an overview of potential follicle-targeting drug delivery formulations currently applied based on the particularities of the hair follicles, including a comprehensive assessment of their preclinical and clinical performance.

Mapping hair follicle-targeted delivery by particle systems: What has science accomplished so far?

The importance of the hair follicle in the process of cutaneous drug penetration has been established since this skin appendage was recognized as an entry point for topically applied substances. A comprehensive review on the hair follicle as a target per se is here provided, exploring the current knowledge on both targeted regions and delivery systems that take advantage of this permeation route. The follicular penetration is a complex process, whose effectiveness and efficiency strongly depends on a diversity of different factors including follicular density and size, activity status of hair follicles and physicochemical properties of the topically applied substances. Nanocarriers represent a heterogeneous assembly of molecules organized into particles and they have revolutionized drug delivery in several areas of medicine, pharmacology and cosmetics. As they possess an inherent ability to use the follicular route, they are reviewed here having in perspective the hair follicle zones that they are able to reach as reported. In this way, a follicular road map for the different delivery systems was compiled to assist as a guiding tool for those that have interest in the development and/or application of such delivery systems for hair and skin treatment or care.

Effect of Coating Process on Mechanical, Optical, and Self-Healing Properties of Waterborne Coating on Basswood Surface with MF-Coated Shellac Core Microcapsule

Self-repairing microcapsules prepared with melamine formaldehyde (MF) resin as wall material and shellac and waterborne coating as core material were added to waterborne coating to prepare a self-repairing coating. In order to explore the effect of the coating process on the performance of the waterborne coating on the basswood surface with microcapsules, the number of coating layers of primer and finish and the addition mode of the microcapsules were tested as influencing factors. The effects of different coating processes on the optical, mechanical, and liquid resistance of the basswood surface coating were investigated. The results showed that different coating processes had little effect on the color difference of the coating. When the coating process was two layers of primer and three layers of finish, and microcapsules were added to the finish, the minimum gloss of the basswood surface coating at 60° incident angle was 10.2%, and the best mechanical properties, liquid resistance, and comprehensive properties were achieved. Finally, the aging resistance and self-healing performance of the waterborne coating on the basswood surface prepared by this coating process were explored. The results showed that the waterborne coating had a certain repair effect on scratch damage. This paper lays a theoretical foundation for the practical application of self-healing microcapsules in wood-surface waterborne coatings.

Polymer nano-systems for the encapsulation and delivery of active biomacromolecular therapeutic agents

Biomacromolecular therapeutic agents, particularly proteins, antigens, enzymes, and nucleic acids are emerging as powerful candidates for the treatment of various diseases and the development of the recent vaccine based on mRNA highlights the enormous potential of this class of drugs for future medical applications. However, biomacromolecular therapeutic agents present an enormous delivery challenge compared to traditional small molecules due to both a high molecular weight and a sensitive structure. Hence, the translation of their inherent pharmaceutical capacity into functional therapies is often hindered by the limited performance of conventional delivery vehicles. Polymer drug delivery systems are a modular solution able to address those issues. In this review, we discuss recent developments in the design of polymer delivery systems specifically tailored to the delivery challenges of biomacromolecular therapeutic agents. In the future, only in combination with a multifaceted and highly tunable delivery system, biomacromolecular therapeutic agents will realize their promising potential for the treatment of diseases and for the future of human health.

Recent Advances in pH- or/and Photo-Responsive Nanovehicles

The combination of nanotechnology and chemotherapy has resulted in more effective drug design via the development of nanomaterial-based drug delivery systems (DDSs) for tumor targeting. Stimulus-responsive DDSs in response to internal or external signals can offer precisely controlled delivery of preloaded therapeutics. Among the various DDSs, the photo-triggered system improves the efficacy and safety of treatment through spatiotemporal manipulation of light. Additionally, pH-induced delivery is one of the most widely studied strategies for targeting the acidic micro-environment of solid tumors. Accordingly, in this review, we discuss representative strategies for designing DDSs using light as an exogenous signal or pH as an endogenous trigger.