Characterization and magnetic properties of two novel copper(II) coordination polymers prepared by different synthetic techniques

Novel Cu(II)-based metal-organic framework STAM-1 as a sulfur host for Li-S batteries

Due to the increasing demand for energy storage devices, the development of high-energy density batteries is very necessary. Lithium-sulfur (Li-S) batteries have gained wide interest due to their particularly high-energy density. However, even this type of battery still needs to be improved. Novel Cu(II)-based metal-organic framework STAM-1 was synthesized and applied as a composite cathode material as a sulfur host in the lithium-sulfur battery with the aim of regulating the redox kinetics of sulfur cathodes. Prepared STAM-1 was characterized by infrared spectroscopy at ambient temperature and after in-situ heating, elemental analysis, X-ray photoelectron spectroscopy and textural properties by nitrogen and carbon dioxide adsorption at - 196 and 0 °C, respectively. Results of the SEM showed that crystals of STAM-1 created a flake-like structure, the surface was uniform and porous enough for electrolyte and sulfur infiltration. Subsequently, STAM-1 was used as a sulfur carrier in the cathode construction of a Li-S battery. The charge/discharge measurements of the novel S/STAM-1/Super P/PVDF cathode demonstrated the initial discharge capacity of 452 mAh g-1 at 0.5 C and after 100 cycles of 430 mAh g-1, with Coulombic efficiency of 97% during the whole cycling procedure at 0.5 C. It was confirmed that novel Cu-based STAM-1 flakes could accelerate the conversion of sulfur species in the cathode material.

A series of four novel alkaline earth metal-organic frameworks constructed of Ca(ii), Sr(ii), Ba(ii) ions and tetrahedral MTB linker: structural diversity, stability study and low/high-pressure gas adsorption properties

A series of four novel microporous alkaline earth metal–organic frameworks (AE-MOFs) containing methanetetrabenzoate linker (MTB) with composition {[Ca₄(μ₈-MTB)₂]·2DMF·4H₂O}_n (UPJS-6), {[Ca₄(μ₄-O)(μ₈-MTB)_3/2(H₂O)₄]·4DMF·4H₂O}_n (UPJS-7), {[Sr₃(μ₇-MTB)_3/2]·4DMF·7H₂O}_n (UPJS-8) and {[Ba₃(μ₇-MTB)_3/2(H₂O)₆]·2DMF·4H₂O}_n (UPJS-9) (UPJS = University of Pavol Jozef Safarik) have been successfully prepared and characterized. The framework stability and thermal robustness of prepared materials were investigated using thermogravimetric analysis (TGA) and high-energy powder X-ray diffraction (HE-PXRD). MOFs were tested as adsorbents for different gases at various pressures and temperatures. Nitrogen and argon adsorption showed that the activated samples have moderate BET surface areas: 103 m² g⁻¹ (N₂)/126 m² g⁻¹ (Ar) for UPJS-7′′, 320 m² g⁻¹ (N₂)/358 m² g⁻¹ (Ar) for UPJS-9′′ and UPJS-8′′ adsorbs only a limited amount of N₂ and Ar. It should be noted that all prepared compounds adsorb carbon dioxide with storage capacities ranging from 3.9 to 2.4 wt% at 20 °C and 1 atm, and 16.4–13.5 wt% at 30 °C and 20 bar. Methane adsorption isotherms show no adsorption at low pressures and with increasing pressure the storage capacity increases to 4.0–2.9 wt% of CH₄ at 30 °C and 20 bar. Compounds displayed the highest hydrogen uptake of 3.7–1.8 wt% at −196 °C and 800 Torr among MTB containing MOFs.

Four novel microporous alkaline earth metal–organic frameworks (AE-MOFs) containing methanetetrabenzoate linker (MTB): UPJS-6, UPJS-7, UPJS-8 and UPJS-9 have been successfully prepared, characterized and tested as adsorbents for different gases.

A new copper(II) supramolecular coordination polymer and a dinuclear compound with multifunctional 2-amino-5-sulfobenzoic acid and flexible N-donor ligands: synthesis, structure and characterization

Multifunctional 2-amino-5-sulfobenzoic acid (H2afsb) can exhibit a variety of roles during the construction of supramolecular coordination polymers. The pendant carboxylic acid, sulfonic acid and amino groups could not only play a role in directing bonding but could also have the potential to act as hydrogen-bond donors and acceptors, resulting in extended high-dimensional supramolecular networks. Two new CuIIcoordination compounds, namelycatena-poly[[[diaquacopper(II)]-μ-1,6-bis(1H-1,2,4-triazol-1-yl)hexane-κ2N4:N4′] bis(3-amino-4-carboxybenzenesulfonate) dihydrate], {[Cu(C10H16N6)2(H2O)2](C7H6NO5S)2·2H2O}nor {[Cu(bth)2(H2O)2](Hafsb)2·2H2O}n, (1), and bis(μ-2-amino-5-sulfonatobenzoato-κ2O1:O1′)bis{μ-1,2-bis[(1H-imidazol-1-yl)methyl]benzene-κ2N3:N3′}bis[aquacopper(II)] trihydrate, [Cu2(C7H5NO5S)2(C14H14N4)2(H2O)2]·3H2O or [Cu2(afsb)2(obix)2(H2O)2]·3H2O, (2), have been obtained through the assembly between H2afsb and the CuIIion in the presence of the flexible N-donor ligands 1,6-bis(1H-1,2,4-triazol-1-yl)hexane (bth) and 1,2-bis[(1H-1,2,4-triazol-1-yl)methyl]benzene (obix), respectively. Compound (1) consists of a cationic coordination polymeric chain and 3-amino-4-carboxybenzenesulfonate (Hafsb−) anions. Compound (2) exhibits an asymmetric dinuclear structure. There are hydrogen-bonded networks within the lattices of (1) and (2). Interestingly, both (1) and (2) exhibit reversible dehydration–rehydration behaviour.