Hydrogenated hematite nanoplates for enhanced photocatalytic and photo-Fenton oxidation of organic compounds

Investigation of α-Fe2O3 catalyst structure for efficient photocatalytic fenton oxidation removal of antibiotics: preparation, performance, and mechanism

Currently, the surface structure modification of photocatalysts is one of the effective means of enhancing their photocatalytic efficiency. Therefore, it is critically important to gain a deeper understanding of how the surface of α-Fe2O3 photocatalysts influences catalytic activity at the nanoscale. In this work, α-Fe2O3 catalysts were prepared using the solvothermal method, and four distinct morphologies were investigated: hexagonal bipyramid (THB), cube (CB), hexagonal plate (HS), and spherical (RC). The results indicate that the hexagonal bipyramid (THB) exhibits the highest degradation activity towards tetracycline (TC), with a reaction rate constant of k = 0.0969 min-1. The apparent reaction rate constants for the cube (CB), hexagonal plate (HS), and spherical (RC) morphologies are 0.0824, 0.0726, and 0.0585 min-1, respectively. In addition, it has been observed that the enhancement of photocatalytic activity is closely related to the increase in surface area, which provides more opportunities for interactions between Fe2+ and holes. The quenching experiments and electron paramagnetic resonance (EPR) results indicate that the ˙O2, ˙OH and h+ contribute mainly to the degradation of TC in the system. This research contributes to a more comprehensive understanding of catalyst surface alterations and their impact on catalytic performance.

Advanced oxidation process for the treatment of industrial wastewater: A review on strategies, mechanisms, bottlenecks and prospects

Due to its complex and, often, highly contaminated nature, treating industrial wastewater poses a significant environmental problem. Many of the persistent pollutants found in industrial effluents cannot be effectively removed by conventional treatment procedures. Advanced Oxidation Processes (AOPs) have emerged as a promising solution, offering versatile and effective means of pollutant removal and mineralization. This comprehensive review explores the application of various AOP strategies in industrial wastewater treatment, focusing on their mechanisms and effectiveness. Ozonation (O3): Ozonation, leveraging ozone (O3), represents a well-established AOP for industrial waste water treatment. Ozone's formidable oxidative potential enables the breakdown of a broad spectrum of organic and inorganic contaminants. This paper provides an in-depth examination of ozone reactions, practical applications, and considerations involved in implementing ozonation. UV/Hydrogen Peroxide (UV/H2O2): The combination of ultraviolet (UV) light and hydrogen peroxide (H2O2) has gained prominence as an AOP due to its ability to generate hydroxyl radicals (ȮH), highly efficient in pollutant degradation. The review explores factors influencing the efficiency of UV/H2O2 processes, including H2O2 dosage and UV radiation intensity. Fenton and Photo-Fenton Processes: Fenton's reagent and Photo-Fenton processes employ iron ions and hydrogen peroxide to generate hydroxyl radicals for pollutant oxidation. The paper delves into the mechanisms, catalyst selection, and the role of photoactivation in enhancing degradation rates within the context of industrial wastewater treatment. Electrochemical Advanced Oxidation Processes (EAOPs): EAOPs encompass a range of techniques, such as electro-Fenton and anodic oxidation, which employ electrode reactions to produce ȮH radicals. This review explores the electrochemical principles, electrode materials, and operational parameters critical for optimizing EAOPs in industrial wastewater treatment. TiO2 Photocatalysis (UV/TiO2): Titanium dioxide (TiO2) photocatalysis, driven by UV light, is examined for its potential in industrial wastewater treatment. The review investigates TiO2 catalyst properties, reaction mechanisms, and the influence of parameters like catalyst loading and UV intensity on pollutant removal. Sonolysis (Ultrasonic Irradiation): High-frequency ultrasound-induced sonolysis represents a unique AOP, generating ȮH radicals during the formation and collapse of cavitation bubbles. This paper delves into the physics of cavitation, sonolytic reactions, and optimization strategies for industrial wastewater treatment. This review offers a critical assessment of the applicability, advantages, and limitations of these AOP strategies in addressing the diverse challenges posed by industrial wastewater. It emphasizes the importance of selecting AOPs tailored to the specific characteristics of industrial effluents and outlines potential directions for future research and practical implementation. The integrated use of these AOPs, when appropriately adapted, holds the potential to achieve sustainable and efficient treatment of industrial wastewater, contributing significantly to environmental preservation and regulatory compliance.

A review of advanced oxidation process towards organic pollutants and its potential application in fracturing flowback fluid

Fracturing flowback fluid (FFF) including various kinds of organic pollutants that do harms to people and new treatments are urgently needed. Advanced oxidation processes (AOPs) are suitable methods in consideration with molecular weight, removal cost and efficiency. Here, we summarize the recent studies about AOP treatments towards organic pollutants and discuss the application prospects in treatment of FFF. Immobilization and loading methods of catalysts, evaluation method of degradation of FFF, and continuous treatment process flow are discussed in this review. In conclusion, further studies are urgently needed in aspects of catalyst loading methods, macromolecule organic evaluation methods, industrial process, and pathways of macromolecule organics' decomposition.

Rapid photodegradation of methylene blue by laser-induced plasma

A new strategy was established for the degradation of wastewater-based organic pollutants. Laser-induced plasma (LIP) was used as an alternative UV light source to realise rapid photodegradation of methylene blue (MB), an organic pollutant. A conventional 1064 nm Nd:YAG laser was used for plasma excitation to degrade MB solutions. The results show that the LIP effectively degraded the organic matter, and the degradation efficiency was related to the UV component with wavelength less than 400 nm. The compositions of the plasma excited by different dielectric substrates are different owing to various mechanisms involving moderate heat dissipation and sonoluminescence. However, metallic substrates, especially Fe, can enhance the proportion of UV light and accelerate the degradation efficiency. In the process of methylene blue degradation, solution parameters, such as initial dye concentration, pH, irradiation time and hydrogen peroxide concentration, will affect the degradation efficiency. The conditions of effective degradation of methylene blue (10 mg L⁻¹ MB⁻¹ concentration, 50 mL L⁻¹ H₂O₂ concentration, pH = 3 and P = 60 mW) were obtained in this study, which can provide reference for practical application.

A new strategy was established for the degradation of wastewater-based organic pollutants.

ZnO nanostructures: synthesis by anodization and applications in photoelectrocatalysis

Solar energy is a clean and abundant energy source. In a photoelectrochemical cell, energy from sunlight is captured and converted into electric power, chemical fuels such as hydrogen is employed to degrade organic pollutants. ZnO is a promising material for photoelectrocatalysis due to its remarkable properties. The aim of this review is to perform an exhaustive revision of nanostructured ZnO synthesis by electrochemical anodization in order to control surface characteristics of this material through anodization parameters such as electrolyte type and concentration, potential, time, temperature, stirring, and post treatment. Finally, application of ZnO nanostructures is overviewed to observe how surface characteristics affected the ZnO photoelectrocatalytic performance.

Understanding the Structure-Performance Relationship of Lithium-Rich Cathode Materials from an Oxygen-Vacancy Perspective

Li-rich layered oxide cathode materials are regarded as an attractive candidate of next-generation Li-ion batteries (LIBs) to realize an energy density of >300 Wh kg^-1. However, challenges such as capacity fade, cycle life, oxygen release, and structural transformation still restrain its practical application. Micro/nanotechnology is one of the effective strategies to enhance its structural stability and electrochemical performance. An in-depth understanding of the relationship between micro/nanostructures and the electrochemical performance of Li-rich layered oxides is undoubtedly important for developing high-performance cathode materials. Herein, Li_1.2Ni_0.13Co_0.13Mn_0.54O₂ with different micro/nanostructures including irregular particles, microspheres, microrods, and orthogonal particles are synthesized. Starting from the amount of surface oxygen vacancies in the different structures, the influence of oxygen vacancies on every step during the charge-discharge processes is analyzed by experimental characterizations and theoretical calculations. It is indicated that intrinsic oxygen vacancies can enhance the electrical conductivity and decrease the energy barrier for ion migration, which exerts a significant influence on promoting the kinetics and capacity. Among the different micro/nanostructures, microrods with abundant oxygen vacancies can not only promote lithium ion transport but also stabilize a cathode electrolyte interface (CEI) film by adjusting the distribution of surface elements with lower nickel content. The microrods deliver an initial discharge capacity of up to 306.1 mAh g^-1 at 0.1C rate and a superior cycle performance with a capacity retention of 91.0% after 200 cycles at 0.2C rate.