Facile construction of g-C3N4-W18O49 heterojunction with improved charge transfer for solar-driven CO2 photoreduction

W18O49/MnWO4 heterojunction for highly efficient photocatalytic reduction of CO2 under full spectrum light

Solar-energy-driven CO₂ reduction for chemical reagents production, such as CH₃OH, CH₄ and CO, has tremendous potential for carbon neutrality in the energy industries. However, the low reduction efficiency limits its applicability. Herein, W₁₈O₄₉/MnWO₄ (WMn) heterojunctions were prepared via one-step in-situ solvothermal process. Through this method, W₁₈O₄₉ tightly combined with the surface of MnWO₄ nanofibers to form nanoflower heterojunction. It was found that under full spectrum light irradiation for 4 h, the yields of photoreduction of CO₂ to CO, CH₄ and CH₃OH by 3-1 WMn heterojunction were 61.74, 71.30 and 18.98 μmol/g, respectively, which were 2.4, 1.8 and 1.1 times that of pristine W₁₈O₄₉, and ca.20 times that of pristine MnWO₄ towards CO production. Furthermore, even in the air atmosphere, the WMn heterojunction still performed excellent photocatalytic performance. Systematic investigations demonstrated that the catalytic performance of WMn heterojunction was improved by superior light utilization and more efficient photo-generated carrier separation and migration as compared with W₁₈O₄₉ and MnWO₄. Meanwhile, the intermediate products of the photocatalytic CO₂ reduction process were also studied in detail by in-situ FTIR. Therefore, this study provides a new way for designing high efficiency of heterojunction for CO₂ reduction.

Recent Advances in g-C3N4-Based Materials and Their Application in Energy and Environmental Sustainability

Graphitic carbon nitride (g-C₃N₄), with facile synthesis, unique structure, high stability, and low cost, has been the hotspot in the field of photocatalysis. However, the photocatalytic performance of g-C₃N₄ is still unsatisfactory due to insufficient capture of visible light, low surface area, poor electronic conductivity, and fast recombination of photogenerated electron-hole pairs. Thus, different modification strategies have been developed to improve its performance. In this review, the properties and preparation methods of g-C₃N₄ are systematically introduced, and various modification approaches, including morphology control, elemental doping, heterojunction construction, and modification with nanomaterials, are discussed. Moreover, photocatalytic applications in energy and environmental sustainability are summarized, such as hydrogen generation, CO₂ reduction, and degradation of contaminants in recent years. Finally, concluding remarks and perspectives on the challenges, and suggestions for exploiting g-C₃N₄-based photocatalysts are presented. This review will deepen the understanding of the state of the art of g-C₃N₄, including the fabrication, modification, and application in energy and environmental sustainability.

Progress and perspectives on 1D nanostructured catalysts applied in photo(electro)catalytic reduction of CO2

Reducing CO₂ into value-added chemicals and fuels by artificial photosynthesis (photocatalysis and photoelectrocatalysis) is one of the considerable solutions to global environmental and energy issues. One-dimensional (1D) nanostructured catalysts (nanowires, nanorods, nanotubes and so on.) have attracted extensive attention due to their superior light-harvesting ability, co-catalyst loading capacity, and high carrier separation rate. This review analyzed the basic principle of the photo(electro)catalytic CO₂ reduction reaction (CO₂ RR) briefly. The preparation methods and properties of 1D nanostructured catalysts are introduced. Next, the applications of 1D nanostructured catalysts in the field of photo(electro)catalytic CO₂ RR are introduced in detail. In particular, we introduced the design of composite catalysts with 1D nanostructures, for example loading 0D, 1D, 2D, and 3D materials on a 1D nanostructured semiconductor to construct a heterojunction to optimize the photo-response range, carrier separation and transport efficiency, CO₂ adsorption and activation capacity, and stability of the catalyst. Finally, the development prospects of 1D nanostructured catalysts are discussed and summarized. This review can provide guidance for the rational design of advanced catalysts for photo(electro)catalytic CO₂ RR.

Construction and excellent photoelectric synergistic anticorrosion performance of Z-scheme carbon nitride/tungsten oxide heterojunctions

The use of heterojunctions for metal corrosion protection is a highly innovative and challenging task. Based on the composition and structure of tungsten oxide-based heterojunctions, Z-scheme heterojunctions were designed and synthesized by the electrostatic self-assembly method using energy band-matched g-C₃N₄ and WO₃ materials. Applied in the field of anticorrosion, they overcame the problems of poor reduction ability and transmission inefficiency of traditional materials. The Z-scheme heterojunctions ensured unidirectional electron transfer, while the aggregation of the retained strongly reduced electrons on the surface of the iron substrates provided a strong driving force for retarding corrosion occurrence. Meanwhile, the inherent shielding properties of the two-dimensional material g-C₃N₄ and the confinement of chloride ions as an electroactive layer hindered the penetration of the corrosive solution. After being corroded for 72 h, the corrosion impedance of the g-C₃N₄/WO₃ heterojunction system was improved by 640.11% compared with the epoxy resin coating. In addition, the g-C₃N₄/W₁₈O₄₉ heterojunction was synthesized by using mixed valence tungsten oxide, which overcame the problems of photogenerated electron yield and lifetime, and enhanced the anticorrosion performance compared with a single g-C₃N₄ phase. This research provided ideas for designing efficient and environmentally friendly heterojunction anticorrosion materials.