Metal-organic frameworks: A new generation potential material for aqueous environmental remediation

Harnessing in vitro cytotoxicity and antibacterial potential of a novel silver-DABCO framework against multi-drug-resistant pathogens

This study aimed to synthesize and characterize silver-based metal-organic frameworks (Ag-MOFs) using 1,4-diazabicyclo[2.2.2]octane (DABCO) as the organic ligand and to assess their antibacterial and cytotoxic properties. The formation of Ag-MOF-D was confirmed by the appearance of a brown solution and a surface plasmon resonance peak at 394 nm in UV-vis spectroscopy. Fourier-transform infrared spectra showed characteristic peaks at 673, 705, 883, 1060, 1382, 1654, and 3250 cm-1. Powder X-ray diffraction patterns indicated a crystalline structure with peaks at 33°, 38°, 55°, and 66°, with an average particle size of 15.68 nm. Ag-MOF-D displayed thermal stability up to 650 °C with a residual mass of 91.50%. Scanning electron microscopy revealed spherical morphology with minimal aggregation, while energy-dispersive X-ray spectroscopy showed 88.64 wt% Ag+. Transmission electron microscopy indicated mono-dispersed spherical particles with an average diameter of 10.47 ± 1.80 nm and a lattice fringe spacing of 0.19 nm. The type II isotherm and Brunauer-Emmett-Teller analysis suggested a mesoporous structure of Ag-MOF-D with a surface area of 5.3005 m2 g-1 and an average pore diameter of 9.46 nm. Minimum inhibitory and minimum bactericidal concentration values against multi-drug-resistant bacterial strains ranged from 3.90 to 7.80 μM and 7.8 to 62.5 μM, respectively. In vitro cytotoxicity testing on Vero cell lines indicated a dose-dependent decrease in cell viability, with an IC50 value of 1.701 × 10-2 mg mL-1. These findings suggest that Ag-MOF-D holds potential for antibacterial applications and biocompatibility, with future opportunities for environmental and food safety applications.

RSM approach for process optimization of the photodegradation of congo red by a novel NiCo2S4/chitosan photocatalyst

The current study reported a facile co-precipitation technique for synthesizing novel NiCo2S4/chitosan nanocomposite. The photocatalytic activity of the prepared nanocomposite was evaluated using congo red (CR) dye as a target pollutant. The central composite design was employed to examine the impact of different reaction conditions on CR dye degradation. This study selected the pH, photocatalyst loading, initial CR concentration and reaction time as reaction parameters, while the degradation efficiency (%) was selected as the response. A desirability factor of 1 suggested the adequacy of the model. Maximum degradation of 93.46% of 35 ppm dye solution was observed after 60 min of visible light irradiation. The response to surface methodology (RSM) is a helpful technique to predict the optimum reaction conditions of the photodegradation of CR dye. Moreover, NiCo2S4/Ch displayed high recyclability and reusability up to four consecutive cycles. The present study suggests that the prepared NiCo2S4/chitosan nanocomposite could prove to be a viable photocatalyst for the treatment of dye-contaminated wastewater.

A combined experimental and modeling approach to elucidate the adsorption mechanism for sustainable water treatment via In2S3-anchored chitosan

A novel Chitosan/Indium sulfide (CS/In2S3) nanocomposite was created by co-precipitating Chitosan and InCl3 in solution, resulting in In2S3 agglomeration on the Chitosan matrix with a remarkable pore diameter of 170.384 Å, and characterized it for the physical and chemical properties. Under optimal conditions (pH = 7, time = 60 min, catalyst dosage = 0.24 g L-1, and dye concentration = 100 mg L-1), the synthesized nanocomposite demonstrated remarkable adsorption capabilities for Victoria Blue (VB), attaining a removal efficiency of 90.81%. The Sips adsorption isotherm best matched the adsorption process, which followed pseudo-second-order kinetics. With a rate constant of 6.357 × 10-3 g mg-1 min-1, the highest adsorption capacity (qm) was found to be 683.34 mg g-1. Statistical physics modeling (SPM) of the adsorption process revealed multi-interaction and multi-molecular adsorption of VB on the CS/In2S3 surface. The nanocomposite demonstrated improved stability and recyclability, indicating the possibility for low-cost, reusable wastewater dye removal adsorbents. These results have the potential to have practical applications in environmental remediation.

Metal-Organic Framework for the Immobilization of Oxidoreductase Enzymes: Scopes and Perspectives

Oxidoreductases are a wide class of enzymes that can catalyze biological oxidation and reduction reactions. Nowadays, oxidoreductases play a vital part in most bioenergetic metabolic pathways, which have important applications in biodegradation, bioremediation, environmental applications, as well as biosensors. However, free oxidoreductases are not stable and hard to be recycled. In addition, cofactors are needed in most oxidoreductases catalyze reactions, which are so expensive and unstable that it hinders their industrial applications. Enzyme immobilization is a feasible strategy that can overcome these problems. Recently, metal-organic frameworks (MOFs) have shown great potential as support materials for immobilizing enzymes due to their unique properties, such as high surface-area-to-volume ratio, chemical stability, functional designability, and tunable pore size. This review discussed the application of MOFs and their composites as immobilized carriers of oxidoreductase, as well as the application of MOFs as catalysts and immobilized carriers in redox reactions in the perspective of the function of MOFs materials. The paper also focuses on the potential of MOF carrier-based oxidoreductase immobilization for designing an enzyme cascade reaction system.

Uptake of Ethyl Xanthate to Metal Organic Frameworks

As the mining industry spreads to new areas in the arctic regions, the need for re-useable efficient methods for mine chemicals' recycling increases. Especially in the case of xanthates, which are used as collectors for many metals from ore. Xanthates are very toxic to aquatic life either directly or indirectly and cause potentially severe health problems to humans after long-term exposure. In the present work, potassium ethyl xanthate (KEX) was observed to coordinate into metal organic frameworks (MOFs). HKUST-1 and its post-synthetically modified forms were observed to behave most effectively of the studied MOFs at low concentrations of KEX. Differences in the uptake of KEX were detected regarding the synthesis method in the case of MIL-100(Fe) synthetized by solvothermal and mechanochemical methods. Other studied MOFs, UiO-66 and MIL-100(Al)/MIL-96(Al), were not observed to be effective in KEX uptake.

Recent advances in new generation nanocomposite materials for adsorption of pharmaceuticals from aqueous environment

With rapid increase in the human population, a large amount of wastewater is generated every year. The availability of fresh water is decreasing at an alarming rate due to rapid industrialization and agricultural development. Pharmaceutical drugs which are credited for improving standards of life worldwide have emerged as major water contaminants, raising global concern about their potential risk to human health and environment. The presence of pharmaceutical compounds is detected in surface water (sea, river, lakes, etc.), groundwater, effluents from municipal, hospitals, and wastewater treatment plants, and even in drinking water. Efficient removal of pharmaceutical pollutants still remains a challenging task. Many techniques, including photodegradation, photocatalysis, oxidation, reverse osmosis, biodegradation, nanofiltration, adsorption, etc., have been used for the remediation of wastewater. Adsorption of pharmaceutical compounds on nanoadsorbents, as a low-cost and feasible technology, has gained immense popularity for wastewater treatment over the last decade. Adsorption techniques can be integrated with wastewater treatment plants to achieve efficient removal on an industrial level. Herein, we review the literature on the remediation techniques used for the pharmaceutical waste treatment using carbon nanotubes, metal oxides, nanoclay, and new-generation MXenes via adsorption. These materials show excellent adsorptive properties owing to their high surface area, low cost, high porosity, easy functionalization, and high surface reactivity. The adsorption mechanism of the nanoadsorbents and their reusability as a factor of sustainability have also been included in the review. The factors affecting the adsorption, including pH, the concentration of adsorbate, ionic strength, and adsorbate dose, have also been discussed.