Photocatalytic behaviour of Ag3PO4, Fe3O4 and Ag3PO4/Fe3O4 heterojunction towards the removal of organic pollutants and Cr(VI) from water: Efficiency and light-corrosion deactivation

Photocatalytic reduction of Cr(VI) using newly synthesized black phosphorus/ZnO nanocomposites

Removal of high toxic Cr(VI) with solar plays an important role in improving water pollution, but is facing a dilemma of developing excellent photocatalysts with high conversion efficiency and low cost. Different from traditional nano-structuring, this work focuses on the interfacial hybridization by considering the intrinsic difference in bonding interaction. Herein, we intentionally make some layered black phosphorus (BP) sheets with Van der Waals interaction to bond with ZnO surfaces, in which some additional electron channels can be formed by this multilevel atomic hybridization to accelerate carrier transfer and separation. Compared to the pristine ZnO and BP nanosheets, the light absorption and carrier separation efficiency can be sharply enhanced by this particular electronic structure, which makes the Cr reduction performance enhanced about 7.1 times. Our findings suggest a new insight into accelerating Cr(VI) reduction by designing interfacial atom hybridization.

Construction synergetic adsorption and activation surface via confined Cu/Cu2O and Ag nanoparticles on TiO2 for effective conversion of CO2 to CH4

High-performance photocatalysts for catalytic reduction of CO2 are largely impeded by inefficient charge separation and surface activity. Reasonable design and efficient collaboration of multiple active sites are important for attaining high reactivity and product selectivity. Herein, Cu-Cu2O and Ag nanoparticles are confined as dual sites for assisting CO2 photoreduction to CH4 on TiO2. The introduction of Cu-Cu2O leads to an all-solid-state Z-scheme heterostructure on the TiO2 surface, which achieves efficient electron transfer to Cu2O and adsorption and activation of CO2. The confined nanometallic Ag further enhances the carrier's separation efficiency, promoting the conversion of activated CO2 molecules to •COOH and further conversion to CH4. Particularly, this strategy is highlighted on the TiO2 system for a photocatalytic reduction reaction of CO2 and H2O with a CH4 generation rate of 62.5 μmol∙g-1∙h-1 and an impressive selectivity of 97.49 %. This work provides new insights into developing robust catalysts through the artful design of synergistic catalytic sites for efficient photocatalytic CO2 conversion.

Rapid colorimetric sensor for ultrasensitive and highly selective detection of Fumonisin B1 in cereal based on laccase-mimicking activity of silver phosphate nanoparticles

Ag3PO4 nanoparticles (NPs) was prepared through a facile coprecipitation method, and was first found to have excellent laccase-mimicking catalytic activity. The study confirms that Fumonisin B1 (FB1) can effectively hinder the production of superoxide anion (O2-) between Ag3PO4 NPs and dissolved oxygen, and further inhibit laccase-mimicking activity of Ag3PO4 NPs. Thus, a novel rapid colorimetric sensor for FB1 analysis in cereal was first established using laccase-mimicking activity as sensing signal. The absorbance variation of sensing solution is directly related to the amount of FB1, and the color change is further combined with smartphone for quantitively analysis of FB1. The limit of detection (LOD) of the sensor is determined as low as 1.73 μg·L-1, which is far lower than the maximum residue limits (MRLs) of FB1 set by European Commission and US Food and Drug Administration (FDA). The average recovery of 87.8-104.5% for FB1 detection was obtained in cereal.

Bi-functional photocatalytic heterostructures combining titania thin films with carbon quantum dots (C-QDs/TiO2) for effective elimination of water pollutants

In this study, carbon quantum dots (C-QDs), prepared via hydrothermal-microwave procedures, were successfully combined with nanostructured titania (TiO2). The photocatalytic oxidation/reduction activity of the C-QDs/TiO2 composite films was evaluated in the decomposition of organic-inorganic contaminants from aqueous solutions under UV illumination. Physicochemical characterizations were applied to investigate the crystal structure of the carbon quantum dots and the composites. It was found that the prepared C-QDs/TiO2 composites had great contribution to the photocatalytic reduction of hexavalent chromium (Cr+6) species and 4-Nitrophenol (PNP) as well as to the photocatalytic oxidation of methylene blue (MB) and Rhodamine B (RhB) dyes. The mechanism of the photocatalytic reaction was studied with trapping experiments, revealing that the electron (e-) radical species were powerfully supported for the photocatalytic reduction of Cr+6 and PNP and the holes (h+) are the main active species for the photocatalytic oxidation reactions.

Valorization of lignocellulosic biomass into sustainable materials for adsorption and photocatalytic applications in water and air remediation

An exponential rise in global pollution and industrialization has led to significant economic and environmental problems due to the insufficient application of green technology for the chemical industry and energy production. Nowadays, the scientific and environmental/industrial communities push to apply new sustainable ways and/or materials for energy/environmental applications through the so-called circular (bio)economy. One of today's hottest topics is primarily valorizing available lignocellulosic biomass wastes into valuable materials for energy or environmentally related applications. This review aims to discuss, from both the chemistry and mechanistic points of view, the recent finding reported on the valorization of biomass wastes into valuable carbon materials. The sorption mechanisms using carbon materials prepared from biomass wastes by emphasizing the relationship between the synthesis route or/and surface modification and the retention performance were discussed towards the removal of organic and heavy metal pollutants from water or air (NO_x, CO₂, VOCs, SO₂, and Hg⁰). Photocatalytic nanoparticle-coated biomass-based carbon materials have proved to be successful composites for water remediation. The review discusses and simplifies the most raised interfacial, photonic, and physical mechanisms that might take place on the surface of these composites under light irradiation. Finally, the review examines the economic benefits and circular bioeconomy and the challenges of transferring this technology to more comprehensive applications.

Construction of magnetically recoverable MnZnFe2O4@Ag3PO4 Z-scheme photocatalyst for rapid visible-light-driven phenol degradation

Visible-light-driven magnetic heterojunction as a promising photocatalysts has received much attention in environmental remediation. In this work, novel Z-scheme heterojunction MnZnFe₂O₄@Ag₃PO₄ (MZFO@APO) magnetic photocatalysts with excellent visible-light-driven photocatalytic activity are successfully constructed and characterized. The photocatalytic activity for phenol degradation is measured, and photodegradation mechanism is investigated with EPR, radical trapping experiments, and LC-MS. It turns out that the heterojunction introduced MZFO exhibits good adsorption effect on visible light and the direct Z-scheme bandgap alignment of MZFO and APO significantly improves charge separation and electron transfer, outperforming that of pure APO. MZFO@APO-40% with 40% APO content shows the rapid photodegradation performance, obtaining a 100% removal efficiency of phenol (25 mg L^-1) after 12-min visible light irradiation, and its kinetic constants are approximately 25.3 and 4.9 times higher than that of P25 TiO₂ and pure APO, respectively. Especially, MZFO@APO-40% also possesses a high magnetic separation property and can be efficiently reused for 5 cycles. Additionally, EPR and radical trapping experiments confirm that h⁺, O₂^-, and ¹O₂ are the main active species in the photocatalytic process. Hydroquinone and small molecular organic acids such as maleic acid and oxalic acid are detected by LC-MS, which further indicates that the pathway of phenol degradation involves hydroxylation, open-ring reactions, and mineralization reactions. The novel addition of MZFO in photocatalyst construction has the potential to promote its application in environmental remediation.

Easy-handling semi-floating TiO2-based aerogel for solar photocatalytic water depollution

One of the capital issues of photocatalytic technology is how to use photocatalytic materials in real world conditions. Suspension photocatalysts are the most effective, while the handling and recovery of nanoparticles are very challenging and costly. Herein, we report the design of semi-floating aerogel TiO_2-based photocatalyst for the oxidation of dyes and photoreduction of Cr(VI). TiO₂ aerogel-based photocatalyst was fabricated through in situ polymerization using borax, poly(vinyl alcohol) and polyvinylidene in the presence of H₂O₂ as a catalyst. Cubic TiO₂ aerogel of few centimetres was designed for the photocatalytic tests under solar light irradiation. TiO₂ aerogel showed a good photoactivity against the oxidation of three types of dyes and Cr(VI) photoreduction. In terms of dyes, the kinetics of methylene blue oxidation was the fastest as compared to rhodamine B and methyl red, while, a total reduction of Cr(VI) at 10 ppm was obtained within 30 min after the addition of tartaric acid as hole scavenger. TiO₂ aerogel can be easily recovered, washed and recycled. TiO₂ aerogel can move freely from the top to the deep solution. The semi-floating property could be an advantage to enhance the mass transfer along with bulk solution, as compared to totally floating-based photocatalysts.

Enhanced Photocatalytic Kinetics Using HDTMA Coated TiO2-Smectite Composite for the Oxidation of Diclofenac under Solar Light

Slow kinetics is one of the capital issues of photocatalytic technology because of its heterogeneous nature, which involves multi-step processes. Herein, we show that the simple modification of the sol-gel-based TiO2-smectite composite by hexadecyltrimethylammonium bromide (HDTMA) significantly boosts adsorption and photocatalytic efficient sol-gel-based light towards the removal of diclofenac from water. Three photocatalysts were prepared, including TiO2, TiO2-smectite, and HDTMA-TiO2-smectite. The materials were characterized to understand the surface interaction and crystal characteristics. In terms of photoactivity, it was found that the addition of HDTMA to TiO2-smectite improved the removal rate by twice. HDTMA changes the functional groups to TiO2-smectite composite allowing enhanced adsorption and photoactivity through the so-called Adsorb and Shuttle process. The recycling tests show that HDTMA-TiO2-smectite can be used up to four times with good performance. This modification approach could intensify the removal of pollutants from water instead of using complicated and costly techniques.

Advances in 2D MXenes-based materials for water purification and disinfection: Synthesis approaches and photocatalytic mechanistic pathways

MXenes two-dimensional materials have recently excited researchers' curiosity for various industrial applications. MXenes are promising materials for environmental remediation technologies to sense and mitigate various intractable hazardous pollutants from the atmosphere due to their inherent mechanical and physicochemical properties, such as high surface area, increased hydrophilicity, high conductivity, changing band gaps, and robust electrochemistry. This review discusses the versatile applications of MXenes and MXene-based nanocomposites in various environmental remediation processes. A brief description of synthetic procedures of MXenes nanocomposites and their different properties are highlighted. Afterward, the photocatalytic abilities of MXene-based nanocomposites for degrading organic pollutants, removal of heavy metals, and inactivation of microorganisms are discussed. In addition, the role of MXenes anti-corrosion support in the lifetime of some semiconductors was addressed. Current challenges and future perspectives toward the application of MXene materials for environmental remediation and energy production are summarized for plausible real-world use.