Catalytic degradation of organic dyes using Au-poly(styrene@N-isopropylmethacrylamide) hybrid microgels

Poly(chitosan-N-vinylcaprolactam-methacrylic acid) microgels as microreactor for Ag(I) ions extraction and in-situ silver nanoparticles formation to reduce the toxins

The toxicity of organic molecules and transition metal cations imposes their removal from aqueous medium to protect human health. Traditionally, systems have been designed to target either organic molecules or transition metal cations individually. However, a homogenous poly(chitosan-N-vinylcaprolactam-methacrylic acid) P(CVM) microgel system has been introduced to effectively eliminate both types of pollutants. This P(CVM) system was synthesized using the free radical precipitation polymerization (FRPP) method and employed as an adsorbent for the removal of silver (I) (Ag(I)) ions from aqueous medium under various environments, including different Ag(I) ions content, agitation times, pH levels, and dose of P(CVM). The extraction behavior of Ag(I) ions onto P(CVM) was analyzed using different adsorption isotherms, while the kinetics of the process were studied using Elovich model (ElM), pseudo-second-order (Ps2O), intra-particle-diffusion model (InPDM), and pseudo-first-order (Ps1O) models. Furthermore, silver nanoparticles (Ag NPs) were synthesized by using loaded Ag(I) ions within P(CVM) through in-situ reduction approach. The resulting Ag nanoparticles decorated P(CVM) (Ag-P(CVM)) hybrid microgels exhibited the ability to catalytically reduce various contaminants from water such as p-nitroaniline (PNiA), methyl red (MeR), chromium (VI) ions (CrM), and eosin Y (EoY). The catalytic activity was measured by determining the pseudo-first-order rate constant (kap), which were found to be 1.166 min-1, 0.562 min-1, 0.157 min-1, and 1.350 min-1 for the catalytic reduction of PNiA, MeR, CrM, and EoY, respectively. Overall, the Ag-P(CVM) system shows superb catalytic activity for various pollutants reduction.

Catalytic reduction of nitroarenes by palladium nanoparticles decorated silica@poly(chitosan-N-isopropylacrylamide-methacrylic acid) hybrid microgels

Conversion of toxic nitroarenes into less toxic aryl amines, which are the most suitable precursors for different types of compounds, is done with various materials which are costly or take more time for this conversion. In this regards, a silica@poly(chitosan-N-isopropylacrylamide-methacrylic acid) Si@P(CS-NIPAM-MAA) Si@P(CNM) core-shell microgel system was synthesized through free radical precipitation polymerization (FRPP) and then fabricated with palladium nanoparticles (Pd NPs) by in situ-reduction method to form Si@Pd-P(CNM) and characterized with XRD, TEM, FTIR, SEM, and EDX. The catalytic efficiency of Si@Pd-P(CNM) hybrid microgels was studied for reduction of 4-nitroaniline (4NiA) under diverse conditions. Different nitroarenes were successfully transformed into their corresponding aryl amines with high yields using the Si@Pd-P(CNM) system as catalyst and NaBH4 as reductant. The Si@Pd-P(CNM) catalyst exhibited remarkable catalytic efficiency and recyclability as well as maintaining its catalytic effectiveness over multiple cycles.

A comprehensive review on crosslinked network systems of zinc oxide-organic polymer composites

In recent years, the synergistic crosslinked networks formed by zinc oxide (ZnO) particles and organic polymers have gained significant attention. This importance is ascribed due to the valuable combination of low band gap containing ZnO particles with responsive behavior containing organic polymers. These properties of both ZnO and organic polymers make a suitable system of crosslinked ZnO-organic polymer composite (CZOPC) for various applications in the fields of biomedicine, catalysis, and environmental perspectives. The literature extensively provided the diverse morphologies and structures of CZOPC, and these architectural structures play a crucial role in determining their efficiency across various applications. Consequently, the careful design of CZOPC shapes tailored to specific purposes has become a focal point. This comprehensive review provides insights into the classifications, synthetic approaches, characterizations, and applications of ZnO particles decorated in organic polymers with crosslinked network. The exploration extends to the adsorption, environmental, catalytic, and biomedical applications of ZnO-organic polymer composites. Adopting a tutorial approach, the review systematically investigates and elucidates the applications of CZOPC with a comprehensive understanding of their diverse capabilities and uses.

Latest advances in layered covalent organic frameworks for water and wastewater treatment

This review provides an overview of recent progress in the development of layered covalent organic frameworks (LCOFs) for the adsorption and degradation of pollutants in water and wastewater treatment. LCOFs have unique properties such as high surface area, porosity, and tunability, which make them attractive adsorbents and catalysts for water and wastewater treatment. The review covers the different synthesis methods for LCOFs, including self-assembly, co-crystallization, template-directed synthesis, covalent organic polymerization (COP), and solvothermal synthesis. It also covers the structural and chemical characteristics of LCOFs, their adsorption and degradation capacity for different pollutants, and their comparison with other adsorbents and catalysts. Additionally, it discussed the mechanism of adsorption and degradation by LCOFs, the potential applications of LCOFs in water and wastewater treatment, case studies and pilot-scale experiments, challenges, and limitations of using LCOFs, and future research directions. The current state of research on LCOFs for water and wastewater treatment is promising, however, more research is needed to improve their performance and practicality. The review highlights that LCOFs have the potential to significantly improve the efficiency and effectiveness of current water and wastewater treatment methods and can also have implications for policy and practice.

Fabrication of silver nanoparticles within chitosan based microgels for catalysis

Chitosan based monodisperse poly[chitosan-N-isopropylmethacrylamide-acrylic acid] [P(CNA)] microgels were produced via precipitation polymerization. Resulting crosslinked P(CNA) micro particles were used as micro-reactors to prepare silver nanoparticles within the polymeric network by chemical reduction of Ag⁺ ions with sodium borohydride. Various techniques including transmission electron microscopy (TEM), Fourier transform infrared (FTIR) spectroscopy and ultraviolet-visible (UV-vis) spectroscopy were used to analyze P(CNA) microgels and Ag-P(CNA) hybrid microgels. Catalytic potential of Ag-P(CNA) hybrid system towards individual and simultaneous reduction of various nitroarenes like p-nitrophenol (pNP), o-nitrophenol (oNP), p-nitroaniline (pNA) and o-nitroaniline (oNA) into corresponding aminoarenes using sodium borohydride as a reductant in aqueous medium was evaluated. The catalytic activity of Ag-P(CNA) system towards both the individual and simultaneous reduction of nitroarenes was examined at various concentrations of catalyst. The values of pseudo first order rate constant (k₁) for reduction of individual nitroarene and multiple nitroarenes were determined for comparison. The Ag-P(CNA) hybrid microgel system was found to be stable, economical and efficient catalyst for rapid individual and simultaneous reduction of nitroarenes.

Transformation of used aluminium foil food container into AlOOH nanoflakes with high catalytic activity in anionic azo dye reduction

Synthesis of aluminium-based nanomaterials from aluminium-waste has received huge attention in current scientific research. Herein, an attempt was made to convert aluminium foil food container into aluminium oxyhydroxide (AlOOH) nanoparticles by a precipitation method. X-ray diffraction (XRD), spectroscopic and electron microscopic studies were employed to characterize impure AlOOH (containing sodium chloride, NaCl) and pure AlOOH samples. The band gap (E_g) of AlOOH nanoparticles was found to be 4.5 eV. The catalytic potential of AlOOH samples was evaluated using reduction of methyl orange (MO) and Eriochrome black T (EBT) dyes. Impure AlOOH nanoparticles could reduce 99.8% of MO and EBT dye within 4 min and 3 min respectively. Effect of the AlOOH dosage and NaBH₄ concentration on catalytic reduction was determined. Used aluminium foil food container-derived AlOOH nanoparticles will become a low-cost and sustainable catalyst in the catalytic treatment of azo dye contaminated waters.

A New 2D Metal–Organic Framework for Photocatalytic Degradation of Organic Dyes in Water

Two–dimensional (2D) metal–organic frameworks (MOFs) are fascinating photocatalytic materials because of their unique physical and catalytic properties. Herein, we report a new (E)–4–(3–carboxyacrylamido) benzoic acid [ABA–MA] ligand synthesized under facile conditions. This ABA–MA ligand is further utilized to synthesize a copper-based 2D MOF via the solvothermal process. The resulting 2D MOF is characterized for morphology and electronic structural analysis using advanced techniques, such as proton nuclear magnetic resonance, Fourier-transform infrared spectroscopy, ultraviolet–visible spectroscopy, and scanning electron microscopy. Furthermore, 2D MOF is employed as a photocatalyst for degrading organic dyes, demonstrating the degradation/reduction of methylene blue (MeBl) dye with excellent catalytic/photodegradation activity in the absence of any photosensitizer or cocatalyst. The apparent rate constant (kap) values for the catalytic degradation/reduction of MeBl on the Cu(II)–[ABA-MA] MOF are reported to be 0.0093 min−1, 0.0187 min−1, and 0.2539 min−1 under different conditions of sunlight and NaBH4. The kinetics and stability evaluations reveal the noteworthy photocatalytic potential of the Cu(II)–[ABA–MA] MOF for wastewater treatment. This work offers new insights into the fabrication of new MOFs for highly versatile photocatalytic applications.

Catalytic degradation of azo dyes by bimetallic nanoparticles loaded in smart polymer microgels

The contamination of water by azo dyes is increasing rapidly due to their waste use in textile industries. These dyes are very toxic for living things. Therefore, it is very important to remove these dyes from water. Various materials are reported for this purpose. Here, the most effective system of bimetallic nanoparticles in smart polymer microgels was prepared. The microgel system of N-isopropylmethacrylamide (NMA) (monomer) and methacrylic acid (MAa) (comonomer) was synthesized by a free radical precipitation polymerization method and then bimetallic (Ag/Ni) nanoparticles were encapsulated into the P(NMA-MAa) microgels by in situ reduction of both silver and nickel salts by NaBH₄ (reductant) after insertion of both (Ag⁺/Ni²⁺) ions. The P(NMA-MAa) microgels and Ag/Ni-P(NMA-MAa) hybrid microgels were characterized with FTIR, UV-vis, TGA, XRD, DLS, EDX, and STEM. The pH and temperature responsive behavior of Ag/Ni-P(NMA-MAa) was also evaluated. The catalytic efficiency of Ag/Ni-P(NMA-MAa) was assessed for degradation of methyl orange (MOr), congo red (CRe), eriochrome black T (EBlT) and methyl red (MRe) dyes under various conditions in aqueous medium. The apparent rate constant (k ₀) value for MOr, CRe, EBlT and MRe was found to be 0.925 min^-1, 0.486 min^-1, 0.540 min^-1 and 0.525 min^-1 respectively. The Ag/Ni-P(NMA-MAa) was found to be an excellent recyclable catalyst.