Biophotoelectrochemistry for renewable energy and environmental applications

Enhanced azo dye reduction at semiconductor-microbe interface: The key role of semiconductor band structure

Low-energy environmental remediation could be achieved by biocatalysis with assistance of light-excited semiconductor, in which the energy band structure of semiconductor has a significant influence on the metabolic process and electron transfer of microbes. In this study, direct Z-scheme and type II heterojunction semiconductor with different energy band structure were successfully synthesized for constructing semiconductor-microbe interface with Shewanella oneidensis MR-1 to achieve acid orange7 (AO7) biodegradation. UV-vis diffuse reflection spectroscopy, photoluminescence spectra and photoelectrochemical analysis revealed that the direct Z-scheme heterojunction semiconductor had stronger reduction power and faster separation of photoelectron-hole, which was beneficial for the AO7 biodegradation at semiconductor-microbe interface. Riboflavin was also involved in electron transfer between the semiconductor and microbes during AO7 reduction. Transcriptome results illustrated that functional gene expression of Shewanella oneidensis MR-1 was upregulated significantly with photo-stimulation of direct Z-scheme semiconductor, and Mtr pathway and conductive pili played the important roles in the photoelectron utilization by Shewanella oneidensis MR-1. This work is expected to provide alternative ideas for designing semiconductor-microbial interface with efficient electron transfer and broadening their applications in bioremediation.

A breath of sunshine: oxygenic photosynthesis by functional molecular architectures

The conversion of light into chemical energy is the game-changer enabling technology for the energetic transition to renewable and clean solar fuels. The photochemistry of interest includes the overall reductive/oxidative splitting of water into hydrogen and oxygen and alternatives based on the reductive conversion of carbon dioxide or nitrogen, as primary sources of energy-rich products. Devices capable of performing such transformations are based on the integration of three sequential core functions: light absorption, photo-induced charge separation, and the photo-activated breaking/making of molecular bonds via specific catalytic routes. The key to success does not rely simply on the individual components' performance, but on their optimized integration in terms of type, number, geometry, spacing, and linkers dictating the photosynthetic architecture. Natural photosynthesis has evolved along this concept, by integrating each functional component in one specialized "body" (from the Greek word "soma") to enable the conversion of light quanta with high efficiency. Therefore, the natural "quantasome" represents the key paradigm to inspire man-made constructs for artificial photosynthesis. The case study presented in this perspective article deals with the design of artificial photosynthetic systems for water oxidation and oxygen production, engineered as molecular architectures then rendered on electrodic surfaces. Water oxidation to oxygen is indeed the pervasive oxidative reaction used by photosynthetic organisms, as the source of reducing equivalents (electrons and protons) to be delivered for the processing of high-energy products. Considering the vast and abundant supply of water (including seawater) as a renewable source on our planet, this is also a very appealing option for photosynthetic energy devices. We will showcase the progress in the last 15 years (2009-2023) in the strategies for integrating functional building blocks as molecular photosensitizers, multi-redox water oxidation catalysts and semiconductor materials, highlighting how additional components such as redox mediators, hydrophilic/hydrophobic pendants, and protective layers can impact on the overall photosynthetic performance. Emerging directions consider the modular tuning of the multi-component device, in order to target a diversity of photocatalytic oxidations, expanding the scope of the primary electron and proton sources while enhancing the added-value of the oxidation product beyond oxygen: the selective photooxidation of organics combines the green chemistry vision with renewable energy schemes and is expected to explode in coming years.

Enhanced etching terminal wastewater treatment and H2 production by in-situ deposited heavy metals on carbon dots/g-C3N4 photocathode microbial electrolysis cells

Sustainable and cost-effective semiconducting photocathodes of microbial electrolysis cells (MECs) are attractively promising for efficient treatment of actual industrial wastewaters containing complex recalcitrant organics and multiple heavy metals. Herein carbon dots/graphitic carbon nitride (CDs/g-C3N4) photocathodes were employed to achieve efficient treatment of actual etching terminal wastewater (ETW) with simultaneous H2 production in MECs, allowing the effluent meeting national discharge standards (GB39731-2020). The progressively in-situ deposited heavy metals on the CDs/g-C3N4 photocathodes, formed as metal oxides/CDs/g-C3N4 after simple calcinations, further enhanced the ETW treatment (recalcitrant organics mineralization: 42.2 mg/L/h vs. 35.5 mg/L/h; heavy metal removal: Cu(II): 9.9 mg/L/h vs. 7.4 mg/L/h, Ni(II): 4.7 mg/L/h vs. 3.5 mg/L/h, Zn(II): 0.7 mg/L/h vs. 0.5 mg/L/h) and H2 production (0.1138 m3/m3/d vs. 0.0662 m3/m3/d). The importation of heavy metals, formed as metal oxides/CDs/g-C3N4 altered the proportion of reactive oxidative species and thus promoted mineralization of recalcitrant organics, besides offering additional electrochemical removal of heavy metals with simultaneous more H2 production. This study demonstrates a new feasible protocol for achieving efficient ETW treatment, and gives a comprehensive appreciation of the effect of in-situ deposited heavy metals on the CDs/g-C3N4 photocathodes, which has a profound effect on subsequent ETW treatment with simultaneous H2 production.

Sunlight Significantly Enhances Soil Denitrification via an Interfacial Biophotoelectrochemical Pathway

Denitrification is an essential step of the nitrogen cycle in soil. However, although sunlight is an important environmental factor for soil, the investigation of the influence of sunlight on soil denitrification is limited to plant photosynthesis-mediated processes. Herein, a new pathway, denoted as a biophotoelectrochemical process, which is induced by the direct photoexcitation of soil, was found to greatly enhance soil denitrification. Using red soil as the research object, the soil with irradiation showed nitrate reduction that was 2.6-4.7 times faster than that without irradiation. The irradiation of soil accelerated the reduction of nitrite and enhanced the conversion of nitrous oxide to nitrogen, indicating that more electron sources were generated. This resulted from the photoinduced generation of ferrous substrates and photoelectrons. The contribution of irradiation to soil denitrification was almost half (45.4%), of which 30.9% was from photoinduced ferrous substrates and 14.5% was from photoelectrons. Moreover, a designed biophotoelectrochemical cell provided solid evidence for direct photoelectron transfer from soil photosensitive substrates to microorganisms. Irradiation promoted the enrichment of Alicyclobacillus, which participates in iron oxidation and electroautotrophy. This finding reveals a role of sunlight in soil denitrification that has been thus seriously overlooked and provides solid evidence for the natural occurrence of photoelectrotrophic effects.

Sustainable Conversion of Microplastics to Methane with Ultrahigh Selectivity by a Biotic-Abiotic Hybrid Photocatalytic System

Efficient conversion of microplastics into fuels provides a promising strategy to alleviate environmental pollution and the energy crisis. However, the conventional processes are challenged by low product selectivity and potential secondary pollution. Herein, a biotic-abiotic photocatalytic system is designed by assembling Methanosarcina barkeri (M. b) and carbon dot-functionalized polymeric carbon nitrides (CDPCN), by which biodegradable microplastics-poly(lactic acid) after heat pretreatment can be converted into CH₄ for five successive 24-day cycles with nearly 100 % CH₄ selectivity by the assistance of additional CO₂ . Mechanistic analyses showed that both photooxidation and photoreduction methanogenesis worked simultaneously via the fully utilizing photogenerated holes and electrons without chemical sacrificial quenchers. Further research validated the real-world applicability of M. b-CDPCN for non-biodegradable microplastic-to-CH₄ conversion, offering a new avenue for engineering the plastic reuse.

Solar-driven methanogenesis with ultrahigh selectivity by turning down H2 production at biotic-abiotic interface

Integration of methanogens with semiconductors is an effective approach to sustainable solar-driven methanogenesis. However, the H₂ production rate by semiconductors largely exceeds that of methanogen metabolism, resulting in abundant H₂ as side product. Here, we report that binary metallic active sites (namely, NiCu alloys) are incorporated into the interface between CdS semiconductors and Methanosarcina barkeri. The self-assembled Methanosarcina barkeri-NiCu@CdS exhibits nearly 100% CH₄ selectivity with a quantum yield of 12.41 ± 0.16% under light illumination, which not only exceeds the reported biotic-abiotic hybrid systems but also is superior to most photocatalytic systems. Further investigation reveal that the Ni-Cu-Cu hollow sites in NiCu alloys can directly supply hydrogen atoms and electrons through photocatalysis to the Methanosarcina barkeri for methanogenesis via both extracellular and intracellular hydrogen cycles, effectively turning down the H₂ production. This work provides important insights into the biotic-abiotic hybrid interface, and offers an avenue for engineering the methanogenesis process.

The drinking water disinfection performances and mechanisms of UVA-LEDs promoted by electrolysis

In this study, the UVA (Ultraviolet A) drinking water disinfection was promoted by electrolysis. The influences of the UVA, electrolysis current, bubbling and temperature were investigated. The disinfection mechanisms and bacterial reactivation had been studied. The results revealed that the treatment time needed to reach the DL (detection limit, about 5.4 log removal) was shortened from 180 to 80 min by the electrolysis. The total electricity consumption decreased from about 126-57.0 kJ/L. Compared with increasing the UVA irradiation, increasing the electrolysis current in a certain range was more preferred to improve the disinfection rate. Oxygen bubbling or higher temperature could enhance the E. coli inactivation. The quenching experiment and EPR (Electron paramagnetic resonance) detection confirmed that ROSs (¹O₂, ·O₂^- and ·OH) played important roles for the disinfection. Compared with the treatment with UVA alone, the cell membrane damage was more severe by the promoting method. In addition to the dramatically reduced enzyme activity, the synergistic process degraded most of the bacterial genomic DNA, and the bacteria were completely killed. Therefore, hybrid with electrolysis is a better way for the application of the UVA-LED disinfection.

Soil indigenous microorganisms alleviate soluble vanadium release from industrial dusts

Vanadium-bearing dusts from industrial processes release abundant toxic vanadium, posing imminent ecological and human health concerns. Although the precipitation of these dusts has been recognized as the main source of soil vanadium pollution, little is known regarding the interrelationships between industrial dusts and soil inherent compositions. In this study, the interactions between dusts from vanadium smelting and soil indigenous microorganisms were investigated. Soluble vanadium (V) [V(V)] released from industrial dusts was reduced by 41.5 ± 0.39% with soil addition, compared to water leaching. Reducible fraction accounted for the highest proportion (55.1 ± 1.73%) of vanadium speciation in the resultant soils, while residual vanadium fraction increased to 83.7 ± 3.22% in the leached dusts. Functional genera (e.g., Aliihoeflea, Actinotalea) that transformed V(V) to insoluble vanadium (IV) alleviated dissolved vanadium release. Nitrate/nitrite reduction and glutathione metabolisms contributed to V(V) immobilization primarily. Structural equation model analysis indicated that V(V) reducers had significant negative impacts on soluble V(V) in the leachate. This first-attempt study highlights the importance of soil microorganisms in immobilizing vanadium from industrial dusts, which is helpful to develop novel strategies to reduce their environmental risks associated to vanadium smelting process.

Sustained Biotic-Abiotic Hybrids Methanogenesis Enabled Using Metal-Free Black Phosphorus/Carbon Nitride

Biotic-abiotic hybrid systems (BAHs) constructed by integrating biological methanogens with photocatalysts offer novel approaches for the effective solar-driven conversion of CO2 to CH4, providing significant inspiration for achieving carbon neutrality and alleviating the energy crisis. As metal photocatalysts would cause photocorrosion that damages microbial cells and lead to system imbalance. Therefore, exploring suitable metal-free photocatalysts is of particular importance in the search for more efficient and sustainable BAHs to improve the actual operability and applicability. Herein, black phosphorus/carbon nitride (BPCNx) as an alternative metal-free heterostructure was combined with Methanosarcina barkeri (M. barkeri) to construct M. barkeri-BPCNx hybrid systems, and their cyclic methanogenesis performance was investigated. Our results demonstrated that BPCNx promotes the separation of photogenerated charges and enhances the quantum yield, providing a sustained energy source for the cyclically driven M. barkeri reduction of CO2 to CH4 under visible light. Our system achieved a total CH4 yield of 1087.45 ± 29.14 μmol gcat–1 after three cycles, 1.96 times higher than that of M. barkeri-Ni@CdS. M. barkeri-BPCNx overcame the defects of the metal photocatalyst and kept cell permeability, achieving cyclic stability and effectively maintaining the activity of M. barkeri. These results highlight the viable role of BPCNx as a metal-free photocatalysts in the construction of BAHs for the sustained and efficient methanation of CO2, which is conducive to the development of an environmentally-friendly, low-cost, and efficient strategy for the conversion of CO2 to CH4.

Efficient production of medium chain fatty acids in microbial electrosynthesis with simultaneous bio-utilization of carbon dioxide and ethanol

Microbial electrosynthesis (MES) is a promising technology for chemicals production driven by renewable energy. However, how the medium chain fatty acids (MCFAs) production in MES is affected by the method of chain elongation is not clear, and no direct evidence is provided yet for a simultaneous bio-utilization of CO₂ and ethanol. In this study, different methods of chain elongation in MES reactors were investigated. During in-situ chain elongation, a maximum caproate concentration of 11.9 ± 0.6 g L^-1 was achieved, while the C6 specificity (56.4% ± 0.5%) was much lower than that of ex-situ chain elongation (78.7% ± 1.5%). Carbon distribution and reduction degree balance indicated a simultaneous bio-utilization of CO₂ and ethanol, and it was validated by the isotope tracer technique. MCFAs-forming microbes, acetogens, and electrochemically active microorganisms were enriched. This study provides fundamental insights relevant to the carbon and electron fluxes driven by electricity.

Anthraquinone-2-Sulfonate as a Microbial Photosensitizer and Capacitor Drives Solar-to-N2O Production with a Quantum Efficiency of Almost Unity

Semiartificial photosynthesis shows great potential in solar energy conversion and environmental application. However, the rate-limiting step of photoelectron transfer at the biomaterial interface results in an unsatisfactory quantum yield (QY, typically lower than 3%). Here, an anthraquinone molecule, which has dual roles of microbial photosensitizer and capacitor, was demonstrated to negotiate the interface photoelectron transfer via decoupling the photochemical reaction with a microbial dark reaction. In a model system, anthraquinone-2-sulfonate (AQS)-photosensitized Thiobacillus denitrificans, a maximum QY of solar-to-nitrous oxide (N₂O) of 96.2% was achieved, which is the highest among the semiartificial photosynthesis systems. Moreover, the conversion of nitrate into N₂O was almost 100%, indicating the excellent selectivity in nitrate reduction. The capacitive property of AQS resulted in 82-89% of photoelectrons released at dark and enhanced 5.6-9.4 times the conversion of solar-to-N₂O. Kinetics investigation revealed a zero-order- and first-order- reaction kinetics of N₂O production in the dark (reductive AQS-mediated electron transfer) and under light (direct photoelectron transfer), respectively. This work is the first study to demonstrate the role of AQS in photosensitizing a microorganism and provides a simple and highly selective approach to produce N₂O from nitrate-polluted wastewater and a strategy for the efficient conversion of solar-to-chemical by a semiartificial photosynthesis system.

Improvement of zero waste sustainable recovery using microbial energy generation systems: A comprehensive review

Microbial energy generation systems, i.e., bioelectrochemical systems (BESs) are promising sustainable technologies that have been used in different fields of application such as biofuel production, biosensor, nutrient recovery, wastewater treatment, and heavy metals removal. However, BESs face great challenges such as large-scale application in real time, low power performance, and suitable materials for their configuration. This review paper aimed to discuss the use of BES systems such as conventional microbial fuel cells (MFCs), as well as plant microbial fuel cell (P-MFC), sediment microbial fuel cell (S-MFC), constructed wetland microbial fuel cell (CW-MFC), osmotic microbial fuel cell (OsMFC), photo-bioelectrochemical fuel cell (PBFC), and MFC-Fenton systems in the zero waste sustainable recovery process. Firstly, the configuration and electrode materials used in BESs as the main sources to improve the performance of these technologies are discussed. Additionally, zero waste recovery process from solid and wastewater feedstock, i.e., energy recovery: electricity generation (from 12 to 26,680 mW m^-2) and fuel generation, i.e., H₂ (170 ± 2.7 L^-1 L^-1 d^-1) and CH₄ (107.6 ± 3.2 mL^-1 g^-1), nutrient recovery of 100% (PO₄³-P), and 13-99% (NH₄⁺-N), heavy metal removal/recovery: water recovery, nitrate (100%), sulfate (53-99%), and sulfide recovery/removal (99%), antibiotic, dye removal, and other product recovery are critically analyzed in this review paper. Finally, the perspective and challenges, and future outlook are highlighted. There is no doubt that BES technologies are an economical option for the simultaneous zero waste elimination and energy recovery. However, more research is required to carry out the large-scale application of BES, as well as their commercialization.

Self-replicating Biophotoelectrochemistry System for Sustainable CO Methanation

Efficient conversion of CO-rich gas to methane (CH₄) provides an effective energy solution by taking advantage of existing natural gas infrastructures. However, traditional chemical and biological conversions face different challenges. Herein, an innovative biophotoelectrochemistry (BPEC) system using Methanosarcina barkeri-CdS as a biohybrid catalyst was successfully employed for CO methanation. Compared with CO₂-fed BPEC, BPEC-CO significantly extended the CH₄ producing time by 1.7-fold and exhibited a higher CH₄ yield by 9.5-fold under light irradiation. This superior conversion of CO resulted from the fact that CO could serve as an effective quencher of reactive species along with the photoelectron production. In addition, CO was used as a carbon source either directly or indirectly via the produced CO₂ for M. barkeri. Such a process improved the redox activities of membrane-bound proteins for BPEC methanogenesis. These results were consistent with the transcriptomic analyses, in which the genes for the putative CO oxidation and CO₂ reduction pathways in M. barkeri were highly expressed, while the gene expression for reactive oxygen species detoxification remained relatively stable under light irradiation. This study has provided the first proof-of-concept evidence for sustainable CO methanation under a mild condition in the self-replicating BPEC system.

Improved polyhydroxybutyrate production by Cupriavidus necator and the photocatalyst graphitic carbon nitride from fructose under low light intensity

The photocatalyst graphitic carbon nitride (g-C₃N₄) is known to photostimulate the production of the bioplastic polyhydroxybutyrate (PHB) by Cupriavidus necator. In previous studies, the combination of C. necator and g-C₃N₄ increased PHB yield from either an organic or inorganic carbon substrate under a light intensity of 4200 lx. Here, different parameters including light intensity, pH, temperature, nitrogen and carbon concentrations, aeration, and inoculum size were explored to maximize PHB production by hybrid photosynthesis from fructose and visible light. A g-C₃N₄/C. necator culture grown with a lower light intensity of 2100 lx, an inoculum size of 128.30 × 10⁶ CFU ml^-1, and constant aeration produced 7.16 g l^-1 d^-1 PHB with a product yield from fructose of 60.94%. Furthermore, the ratio of incident photons harvested by g-C₃N₄ converted into NADPH+H⁺ by C. necator for PHB production was improved to 19.74% after the process optimization. In comparison, the PHB production rate of a non-optimized g-C₃N₄/C. necator system exposed to 4200 lx was only 2.94 g l^-1 d^-1 with a product yield from fructose of 33.29%. These results demonstrate that hybrid photosynthesis productivity can be significantly augmented by decreasing light intensity and adjusting other parameters, which is promising for future bioproduction applications.