Post-surgical wireless monitoring of arterial health progression

In-vivo blood pressure sensing with bi-filler nanocomposite

Conductive elastomers present desirable qualities for sensing pressure in-vivo, such as high piezoresistance in tiny volumes, conformability and, biocompatibility. Many electrically conductive nanocomposites however, are susceptible to electrical drift following repeated stress cycles and chemical aging. Here we propose an innovative approach to stabilize nanocomposite percolation network against incomplete recovery to improve reproducibility and facilitate sensor calibration. We decouple the tunnelling-percolation network of highly-oriented pyrolytic graphite (HOPG) nanoparticles from the incomplete viscoelastic recovery of the polydimethylsiloxane (PDMS) matrix by inserting minute amounts of insulating SiO2 nanospheres. SiO2 nanospheres effectively reduce the number of nearest neighbours at each percolation node switching off the parallel electrical pathways that might become activated under incomplete viscoelastic relaxation. We varied the size of SiO2 nanospheres and their filling fraction to demonstrate nearly complete piezoresistance recovery when SiO2 and HOPG nanoparticles have equal diameters (≈400 nm) and SiO2 and HOPG volume fractions are 1 % and 29.5 % respectively. We demonstrate an in-vivo blood pressure sensor based on this bi-filler composite.

Soft implantable printed bioelectronic system for wireless continuous monitoring of restenosis

Atherosclerosis is a prominent cause of coronary artery disease and broader cardiovascular diseases, the leading cause of death worldwide. Angioplasty and stenting is a common treatment, but in-stent restenosis, where the artery re-narrows, is a frequent complication. Restenosis is detected through invasive procedures and is not currently monitored frequently for patients. Here, we report an implantable vascular bioelectronic device using a newly developed miniaturized strain sensor via microneedle printing methods. A capillary-based printing system achieves high-resolution patterning of a soft, capacitive strain sensor. Ink and printing parameters are evaluated to create a fully printed sensor, while sensor design and sensing mechanism are studied to enhance sensitivity and minimize sensor size. The sensor is integrated with a wireless vascular stent, offering a biocompatible, battery-free, wireless monitoring system compatible with conventional catheterization procedures. The vascular sensing system is demonstrated in an artery model for monitoring restenosis progression. Collectively, the artery implantable bioelectronic system shows the potential for wireless, real-time monitoring of various cardiovascular diseases and stent-integrated sensing/treatments.

Applications of flexible electronics related to cardiocerebral vascular system

Ensuring accessible and high-quality healthcare worldwide requires field-deployable and affordable clinical diagnostic tools with high performance. In recent years, flexible electronics with wearable and implantable capabilities have garnered significant attention from researchers, which functioned as vital clinical diagnostic-assisted tools by real-time signal transmission from interested targets in vivo. As the most crucial and complex system of human body, cardiocerebral vascular system together with heart-brain network attracts researchers inputting profuse and indefatigable efforts on proper flexible electronics design and materials selection, trying to overcome the impassable gulf between vivid organisms and rigid inorganic units. This article reviews recent breakthroughs in flexible electronics specifically applied to cardiocerebral vascular system and heart-brain network. Relevant sensor types and working principles, electronics materials selection and treatment methods are expounded. Applications of flexible electronics related to these interested organs and systems are specially highlighted. Through precedent great working studies, we conclude their merits and point out some limitations in this emerging field, thus will help to pave the way for revolutionary flexible electronics and diagnosis assisted tools development.

Current state of the art and future directions for implantable sensors in medical technology: Clinical needs and engineering challenges

Implantable sensors have revolutionized the way we monitor biophysical and biochemical parameters by enabling real-time closed-loop intervention or therapy. These technologies align with the new era of healthcare known as healthcare 5.0, which encompasses smart disease control and detection, virtual care, intelligent health management, smart monitoring, and decision-making. This review explores the diverse biomedical applications of implantable temperature, mechanical, electrophysiological, optical, and electrochemical sensors. We delve into the engineering principles that serve as the foundation for their development. We also address the challenges faced by researchers and designers in bridging the gap between implantable sensor research and their clinical adoption by emphasizing the importance of careful consideration of clinical requirements and engineering challenges. We highlight the need for future research to explore issues such as long-term performance, biocompatibility, and power sources, as well as the potential for implantable sensors to transform healthcare across multiple disciplines. It is evident that implantable sensors have immense potential in the field of medical technology. However, the gap between research and clinical adoption remains wide, and there are still major obstacles to overcome before they can become a widely adopted part of medical practice.

Postintervention monitoring of peripheral arterial disease wound healing using dynamic vascular optical spectroscopy

SIGNIFICANCE

Due to the persistence of chronic wounds, a second surgical intervention is often necessary for patients with peripheral arterial disease (PAD) within a year of the first intervention. The dynamic vascular optical spectroscopy system (DVOS) may assist physicians in determining patient prognosis only a month after the first surgical intervention.

AIM

We aim to assess the DVOS utility in characterizing wound healing in PAD patients after endovascular intervention.

APPROACH

The DVOS used near-infrared light ( 670 < λ < 850    nm ) to record hemodynamic response to a cuff inflation in 14 PAD patients with lower limb ulcers immediately before, immediately after, and at a first follow-up 3 to 4 weeks after intervention. Ankle-brachial index (ABI) and arterial duplex ultrasound (A-DUS) measurements were obtained when possible.

RESULTS

The total hemoglobin plateau time differed significantly between patients with ulcers that reduced in size ( N = 9 ) and patients with ulcers that did not ( N = 5 ) 3 to 4 weeks after intervention ( p  value < 0.001 ). Data correlated strongly (89% sensitivity, 100% specificity, and AUC = 0.96 ) with long-term wound healing. ABI and A-DUS measurements were not statistically associated with wound healing.

CONCLUSIONS

This pilot study demonstrates the potential of the DVOS to aid physicians in giving accurate long-term wound healing prognoses 1 month after intervention.

Fully implantable batteryless soft platforms with printed nanomaterial-based arterial stiffness sensors for wireless continuous monitoring of restenosis in real time

Atherosclerosis is a common cause of coronary artery disease and a significant factor in broader cardiovascular diseases, the leading cause of death. While implantation of a stent is a prevalent treatment of coronary artery disease, a frequent complication is restenosis, where the stented artery narrows and stiffens. Although early detection of restenosis can be achieved by continuous monitoring, no available device offers such capability without surgeries. Here, we report a fully implantable soft electronic system without batteries and circuits, which still enables continuous wireless monitoring of restenosis in real-time with a set of nanomembrane strain sensors in an electronic stent. The low-profile system requires minimal invasive implantation to deploy the sensors into a blood vessel through catheterization. The entirely printed, nanomaterial-based set of soft membrane strain sensors utilizes a sliding mechanism to offer enhanced sensitivity and detection of low strain while unobtrusively integrating with an inductive stent for passive wireless sensing. The performance of the soft sensor platform is demonstrated by wireless monitoring of restenosis in an artery model and an ex-vivo study in a coronary artery of ovine hearts. The capacitive sensor-based artery implantation system offers unique advantages in wireless, real-time monitoring of stent treatments and arterial health for cardiovascular disease.