Nanoscale chemical and mechanical heterogeneity of human dentin characterized by AFM-IR and bimodal AFM

Nano-Investigation of Mineralized Biological Samples Chemical Composition: Experimental Challenges, Constraints, and Considerations

Understanding the chemical composition of calcifications in biological tissues at the nanoscale is crucial for deciphering their formation processes and possible pathological implications. Atomic Force Microscopy Infrared Spectroscopy (AFM-IR), by allowing IR spectroscopy at the nanoscale, is thus a promising strategy to access such highly spatially resolved chemical information. However, these specimens' inherent morphological and mechanical heterogeneities pose significant challenges for standard resonance-enhanced (RE-AFM-IR) and tapping AFM-IR acquisition modes. This study introduces a dual-mode approach combining tapping and RE-AFM-IR to address these challenges. Tapping AFM-IR is first employed to acquire the topography of the soft and rough surfaces, while RE-AFM-IR provides chemical description at the submicrometric scale through hyperspectral (HS) imaging. This dual-mode methodology is validated on different mineralized biological samples, including breast microcalcifications, revealing the local chemical heterogeneous distribution within the calcium phosphate matrice. Our results outline that dual-mode AFM-IR, coupled with HS imaging, enables robust chemical characterization of highly heterogeneous biomaterials and offers a more comprehensive description compared to conventional AFM-IR single-wavenumber mapping and local spectra.

Effects of poly(amidoamine) as an extrafibrillar demineralization agent on dentin bonding durability of deciduous teeth

OBJECTIVES

To investigate the effects of the sixth generation of poly(amidoamine) (G6-PAMAM)-based extrafibrillar demineralization on bonding durability of deciduous dentin and explore the possible mechanisms.

METHODS

The cytotoxicity and inhibitory effects on recombinant human matrix metalloproteinases-9 (rhMMP-9) of G6-PAMAM were investigated. The chelation demineralization capacity of G6-PAMAM with molecular weight > 40 kDa was quantitatively analyzed. Atomic force microscopy-infrared spectroscopy (AFM-IR) was used to verify selective extrafibrillar demineralization of dentin conditioned by G6-PAMAM. After dentin surfaces were conditioned with G6-PAMAM or phosphoric acid (H3PO4), G6-PAMAM- and H3PO4-conditioned dentin were applied with adhesive restoration using both wet- and dry-bonding technique. Microtensile bond strength (μTBS) was evaluated after 24 h storage or 10,000 thermocycling. Nanoleakage expression at the bonding interface was observed using field emission scanning electron microscopy. Gelatinolytic activity within the hybrid layer was examined using in situ zymography.

RESULTS

In addition to being nontoxic, 20 µg/mL G6-PAMAM showed inhibitory effects on rhMMP-9 and calcium-chelating capability. AFM-IR confirmed that G6-PAMAM conditioning can achieve selective demineralization of dentin extrafibrillar minerals. Deciduous dentin treated with 20 µg/mL G6-PAMAM for 60 s produced μTBS equivalent to H3PO4-based etch-and-rinse technique. Those bond strengths were maintained after thermocycling, irrespective of wet-bonding or dry-bonding. G6-PAMAM conditioning produced less nanoleakage and suppressed endogenous gelatinolytic activity compare with H3PO4 etching.

CONCLUSION

The G6-PAMAM-based extrafibrillar demineralization strategy under dry-bonding technique could enhance bonding durability of deciduous dentin by retaining intrafibrillar minerals, decreasing interfacial nanoleakage, and preventing endogenous protease-initiated collagen degradation.

CLINICAL RELEVANCE

The G6-PAMAM-based extrafibrillar demineralization strategy has the potential to improve the stability of the resin-dentin bonding interface and prolong the longevity of resin restorations in deciduous teeth.

Osteomimix: A Multidimensional Biomimetic Cascade Strategy for Bone Defect Repair

Despite advancements in biomimetic mineralization techniques, the repair of large-scale bone defects remains a significant challenge. Inspired by the bone formation process, a multidimensional biomimetic cascade strategy is developed by replicating the biomineralization cascade, emulating the hierarchical structure of bone, and biomimicking its biological functions for efficient bone regeneration. This strategy involves the photocrosslinking of sodium methacrylate carboxymethyl cellulose-stabilized amorphous magnesium-calcium phosphate with methacrylate-modified type I collagen to create a self-mineralizing hydrogel. The hydrogel is then integrated with either naturally derived or synthetic oriented bulk scaffolds. The resulting composite, named Osteomimix, provides excellent mechanical support and can be customized for irregular bone defects using CAD/CAM technology. Through in vitro and in vivo studies, this work finds that Osteomimix exhibits spontaneous in situ biomimetic mineralization in a cell-free environment, while modulating immune responses and promoting vascularized bone formation in a cell-dependent manner. Built on bone-specific insights, this strategy achieves biomimicry across temporal, spatial, and functional dimensions, facilitating the seamless integration of artificial constructs with the natural tissue repair dynamics.

Light-modulated van der Waals force microscopy

Atomic force microscope generally works by manipulating the absolute magnitude of the van der Waals force between tip and specimen. This force is, however, less sensitive to atom species than to tip-sample separations, making compositional identification difficult, even under multi-modal strategies or other atomic force microscopy variations. Here, we report the phenomenon of a light-modulated tip-sample van der Waals force whose magnitude is found to be material specific, which can be employed to discriminate heterogeneous compositions of materials. We thus establish a near-field microscopic method, named light-modulated van der Waals force microscopy. Experiments discriminating heterogeneous crystalline phases or compositions in typical materials demonstrate a high compositional resolving capability, represented by a 20 dB signal-to-noise ratio on a MoTe2 film under the excitation of a 633 nm laser of 1.2 mW, alongside a sub-10 nm lateral spatial resolution, smaller than the tip size of 20 nm. The simplicity of the light modulation mechanism, minute excitation light power, broadband excitation wavelength, and diversity of the applicable materials imply broad applications of this method on material characterization, particularly on two-dimensional materials that are promising candidates for next-generation chips.

Variation of Young's modulus suggested the main active sites for four different aging plastics at an early age time

Precisely determining which bonds are more sensitive when plastic aging occurs is critical to better understand the mechanisms of toxic release and microplastics formation. However, the relationship between chemical bonds with the active aging sites changes and the aging behavior of plastics at an early age is still unclear. Herein, the mechanical behavior of four polymers with different substituents was characterized by the high-resolution AFM. Young's modulus (YM) changes suggested that the cleavage of C-Cl bonds in PVC, C-H bonds in PE and PP, and C-F bonds in PTFE are the main active aging sites for plastic aging. The aging degree of the plastics followed the order of PVC > PP > PE > PTFE. Two aging periods exhibited different YM change behavior, the free radical and cross-linking resulted in a minor increase in YM during the initiation period. Numerous free radicals formed and cross-linking reaction happened, causing a significant increase in YM during the propagation period. Raman spectroscopy verified the formation of microplastics. This research develops promising strategies to quantitatively evaluate the aging degrees using AFM and establish the relationship between chemical bonds and mechanical behavior, which would provide new method to predict plastic pollution in actual environments.

Time-resolved vibrational dynamics: Novel opportunities for sensing and imaging

The evolution of time-resolved spectroscopies has resulted in significant advancements across numerous scientific disciplines, particularly those concerned with molecular electronic states. However, the intricacy of molecular vibrational spectroscopies, which provide comprehensive molecular-level information within complex structures, has presented considerable challenges due to the ultrashort dephasing time. Over recent decades, an increasing focus has been placed on exploring the temporal progression of bond vibrations, thereby facilitating an improved understanding of energy redistribution within and between molecules. This review article focuses on an array of time-resolved detection methodologies, each distinguished by unique technological attributes that offer exclusive capabilities for investigating the physical phenomena propelled by molecular vibrational dynamics. In summary, time-resolved vibrational spectroscopy emerges as a potent instrument for deciphering the dynamic behavior of molecules. Its potential for driving future progress across fields as diverse as biology and materials science is substantial, marking a promising future for this innovative tool.

Atomic force microscopy-mediated mechanobiological profiling of complex human tissues

Tissue mechanobiology is an emerging field with the overarching goal of understanding the interplay between biophysical and biochemical responses affecting development, physiology, and disease. Changes in mechanical properties including stiffness and viscosity have been shown to describe how cells and tissues respond to mechanical cues and modify critical biological functions. To quantitatively characterize the mechanical properties of tissues at physiologically relevant conditions, atomic force microscopy (AFM) has emerged as a highly versatile biomechanical technology. In this review, we describe the fundamental principles of AFM, typical AFM modalities used for tissue mechanics, and commonly used elastic and viscoelastic contact mechanics models to characterize complex human tissues. Furthermore, we discuss the application of AFM-based mechanobiology to characterize the mechanical responses within complex human tissues to track their developmental, physiological/functional, and diseased states, including oral, hearing, and cancer-related tissues. Finally, we discuss the current outlook and challenges to further advance the field of tissue mechanobiology. Altogether, AFM-based tissue mechanobiology provides a mechanistic understanding of biological processes governing the unique functions of tissues.

AFM-IR for Nanoscale Chemical Characterization in Life Sciences: Recent Developments and Future Directions

Despite the ubiquitous absorption of mid-infrared (IR) radiation by virtually all molecules that belong to the major biomolecules groups (proteins, lipids, carbohydrates, nucleic acids), the application of conventional IR microscopy to the life sciences remained somewhat limited, due to the restrictions on spatial resolution imposed by the diffraction limit (in the order of several micrometers). This issue is addressed by AFM-IR, a scanning probe-based technique that allows for chemical analysis at the nanoscale with resolutions down to 10 nm and thus has the potential to contribute to the investigation of nano and microscale biological processes. In this perspective, in addition to a concise description of the working principles and operating modes of AFM-IR, we present and evaluate the latest key applications of AFM-IR to the life sciences, summarizing what the technique has to offer to this field. Furthermore, we discuss the most relevant current limitations and point out potential future developments and areas for further application for fruitful interdisciplinary collaboration.

Correlative Atomic Force Microscopy and Raman Spectroscopy in Acid Erosion of Dentin

Physical properties and chemical composition are fundamentally defining and interconnected surface characteristics. However, few techniques are able to capture both in a correlative fashion at the same sample location and orientation. This is especially important for complex materials such as dentin, which is an inner tooth structure and is a heterogeneous, composite inorganic-organic material with open channels (tubules) that extend toward the tooth pulp. Here, a combined microscope system consisting of an atomic force microscope and a confocal Raman spectrometer was used to study the correlative physical and chemical properties of human dentin. The local hardness of dentin was highly correlated with the Raman signal ratio of inorganic to organic material, and this was enhanced in the peritubular regions of dentin. When the samples were etched with citric acid, Young's modulus, hardness, and inorganic-to-organic material ratio decreased significantly, collagen fibrils on the surface were exposed, the peritubular regions were removed, and the tubule diameters increased. Thus, the combined atomic force microscopy (AFM)-Raman approach allows for comprehensive and correlative physical-chemical analysis of material surfaces and will be invaluable for evaluating oral therapeutic strategies.

Enhancing effects of immobilized chondroitin sulfate on odontogenic differentiation of dental pulp stem cells and reparative dentin formation

OBJECTIVES

Chondroitin sulfate (CS) is a major proteoglycan involved in the mineralization of the organic matrix of dentin. In this study, the roles of CS immobilized in crosslinked collagen I hydrogels (CS-Col I) on odontogenic differentiation of dental pulp stem cells (DPSCs) and reparative dentin formation were investigated.

METHODS

Different concentrations of CS were incorporated into the genipin- crosslinked Col I hydrogels (CS-0.05, CS-0.1, and CS-0.2 respectively). The influences of CS on proliferation and odontogenic differentiation of DPSCs were investigated. Finally, the effect of the functionalized hydrogel on the formation of reparative dentin was analyzed in a rat pulp capping model in vivo.

RESULTS

CS improved the proliferation of DPSCs seeded on the hydrogels (p<0.05). CS also enhanced the mineralization activities and increased the expression levels of the odontogenic related proteins of DPSCs on day 7 and day 14 (p<0.05). In vivo, CS-0.1 hydrogel induced reparative dentin formation with higher quality compared to mineral trioxide aggregate (MTA).

CONCLUSION

CS immobilized in Col I hydrogels could induce odontogenic differentiation of DPSCs in vitro and promote homogeneous mineralized barrier formation in vivo. CS-Col I hydrogel has the potential for reparative dentin formation of high quality in direct pulp capping.

Novel bioactive dental restorations to inhibit secondary caries in enamel and dentin under oral biofilms

OBJECTIVE

To provide the first review on cutting-edge research on the development of new bioactive restorations to inhibit secondary caries in enamel and dentin under biofilms. State-of-the-art bioactive and therapeutic materials design, structure-property relationships, performance and efficacies in oral biofilm models.

DATA, SOURCES AND STUDY SELECTION

Researches on development and assessment new secondary caries inhibition restorations via in vitro and in vivo biofilm-based secondary caries models were included. The search of articles was carried out in Web of Science, PubMed, Medline and Scopus.

CONCLUSIONS

Based on the found articles, novel bioactive materials are divided into different categories according to their remineralization and antibacterial biofunctions. In vitro and in vivo biofilm-based secondary caries models are effective way of evaluating the materials efficacies. However, new intelligent and pH-responsive materials were still urgent need. And the materials evaluation should be performed via more clinical relevant biofilm-based secondary caries models.

CLINICAL SIGNIFICANCE

Secondary caries is a primary reason for dental restoration failures. Biofilms produce acids, causing demineralization and secondary caries. To inhibit dental caries and improve the health and quality of life for millions of people, it is necessary to summarize the present state of technologies and new advances in dental biomaterials for preventing secondary caries and protecting tooth structures against oral biofilm attacks. In addition, suggestions for future studies are provided.

Matrix/mineral ratio and domain size variation with bone tissue age: A photothermal infrared study

Atomic force microscopy-infrared spectroscopy (AFM-IR) and optical photothermal infrared spectroscopy (O-PTIR), which feature spectroscopic imaging spatial resolution down to ∼ 50 nm and ∼ 500 nm, respectively, were employed to characterize the nano- to microscale chemical compositional changes in bone. Since these changes are known to be age dependent, fluorescently labelled bone samples were employed. The average matrix/mineral ratio values decrease as the bone tissue matures as measured by both AFM-IR and O-PTIR, which agrees with previously published FTIR and Raman spectroscopy results. IR ratio maps obtained by AFM-IR reveal variation in matrix/mineral ratio-generating micron-scale bands running parallel to the bone surface as well as smaller domains within these bands ranging from ∼ 50 to 700 nm in size, which is consistent with the previously published length scale of nanomechanical heterogeneity. The matrix/mineral changes do not exhibit a smooth gradient with tissue age. Rather, the matrix/mineral transition occurs sharply within the length scale of 100-200 nm. O-PTIR also reveals matrix/mineral band domains running parallel to the bone surface, resulting in waves of matrix/mineral ratios progressing from the youngest to most mature tissue. Both AFM-IR and O-PTIR show a greater variation in matrix/mineral ratio value for younger tissue as compared to older tissue. Together, this data confirms O-PTIR and AFM-IR as techniques that visualize bulk spectroscopic data consistent with higher-order imaging techniques such as Raman and FTIR, while revealing novel insight into how mineralization patterns vary as bone tissue ages.

Retention of Intrafibrillar Minerals Improves Resin-Dentin Bond Durability

The concept of extrafibrillar demineralization involves selective removal of apatite crystallites from the extrafibrillar spaces of mineralized dentin without disturbing the intrafibrillar minerals within collagen. This helps avoiding activation of endogenous proteases and enables air-drying of partially demineralized dentin without causing collapse of completely demineralized collagen matrix that adversely affects resin infiltration. The objective of the present study was to evaluate the potential of quaternized carboxymethyl chitosan (QCMC)-based extrafibrillar demineralization in improving resin-dentin bond durability. Isothermal titration calorimetry indicated that QCMC synthesized by quaternization of O-carboxymethyl chitosan had moderate affinity for Ca²⁺ (binding constant: 8.9 × 10⁴ M^-1). Wet and dry bonding with the QCMC-based demineralization produced tensile bond strengths equivalent to the phosphoric acid (H₃PO₄)-based etch-and-rinse technique. Those bond strengths were maintained after thermocycling. Amide I and PO₄^3- mappings of QCMC-conditioned dentin were performed with atomic force microscope-infrared spectroscopy (AFM-IR). Whereas H₃PO₄-etched dentin exhibited an extensive reduction in PO₄^3- signals corresponding to apatite depletion, QCMC-conditioned dentin showed scattered dark areas and bright PO₄^3- streak signals. The latter were consistent with areas identified as collagen fibrils in the amide I mapping and were suggestive of the presence of intrafibrillar minerals in QCMC-conditioned dentin. Young's modulus mapping of QCMC-demineralized dentin obtained by AFM-based amplitude modulation-frequency modulation recorded moduli that were the same order of magnitude as those in mineralized dentin and at least 1 order higher than H₃PO₄-etched dentin. In situ zymography of the gelatinolytic activity within hybrid layers created with QCMC conditioning revealed extremely low signals before and after thermocycling, compared with H₃PO₄-etched dentin for both wet and dry bonding. Confocal laser scanning microscopy identified the antibacterial potential of QCMC against Streptococcus mutans and Enterococcus faecalis biofilms. Taken together, the QCMC-based demineralization retains intrafibrillar minerals, preserves the elastic modulus of collagen fibrils, reduces endogenous proteolytic activity, and inhibits bacteria biofilms to extend dentin bond durability.

Electrospun fiber-based strategies for controlling early innate immune cell responses: Towards immunomodulatory mesh designs that facilitate robust tissue repair

Electrospun fibrous meshes are widely used for tissue repair due to their ability to guide a host of cell responses including phenotypic differentiation and tissue maturation. A critical factor determining the eventual biological outcomes of mesh-based regeneration strategies is the early innate immune response following implantation. The natural healing process involves a sequence of tightly regulated, temporally varying and delicately balanced pro-/anti-inflammatory events which together promote mesh integration with host tissue. Matrix designs that do not account for the immune milieu can result in dysregulation, chronic inflammation and fibrous capsule formation, thus obliterating potential therapeutic outcomes. In this review, we provide systematic insights into the effects of specific fiber/mesh properties and mechanical stimulation on the responses of early innate immune modulators viz., neutrophils, monocytes and macrophages. We identify matrix characteristics that promote anti-inflammatory immune phenotypes, and we correlate such responses with pro-regenerative in vivo outcomes. We also discuss recent advances in 3D fabrication technologies, bioactive functionalization approaches and biomimetic/bioinspired immunomodulatory mesh design strategies for tissue repair and wound healing. The mechanobiological insights and immunoregulatory strategies discussed herein can help improve the translational outcomes of fiber-based regeneration and may also be leveraged for intervention in degenerative diseases associated with dysfunctional immune responses. STATEMENT OF SIGNIFICANCE: The crucial role played by immune cells in promoting biomaterial-based tissue regeneration is being increasingly recognized. In this review focusing on the interactions of innate immune cells (primarily neutrophils, monocytes and macrophages) with electrospun fibrous meshes, we systematically elucidate the effects of the fiber microenvironment and mechanical stimulation on biological responses, and build upon these insights to inform the rational design of immunomodulatory meshes for effective tissue repair. We discuss state-of-the-art fabrication methods and mechanobiological advances that permit the orchestration of temporally controlled phenotypic switches in immune cells during different phases of healing. The design strategies discussed herein can also be leveraged to target several complex autoimmune and inflammatory diseases.

Applications of scanning electron microscopy and focused ion beam milling in dental research

The abilities of scanning electron microscopy (SEM) and focused ion beam (FIB) milling for obtaining high-resolution images from top surfaces, cross-sectional surfaces, and even in three dimensions, are becoming increasingly important for imaging and analyzing tooth structures such as enamel and dentin. FIB was originally developed for material research in the semiconductor industry. However, use of SEM/FIB has been growing recently in dental research due to the versatility of dual platform instruments that can be used as a milling device to obtain low-artifact cross-sections of samples combined with high-resolution images. The advent of the SEM/FIB system and accessories may offer access to previously inaccessible length scales for characterizing tooth structures for dental research, opening exciting opportunities to address many central questions in dental research. New discoveries and fundamental breakthroughs in understanding are likely to follow. This review covers the applications, key findings, and future direction of SEM/FIB in dental research in morphology imaging, specimen preparation for transmission electron microscopy (TEM) analysis, and three-dimensional volume imaging using SEM/FIB tomography.

Microscopy-based infrared spectroscopy as a tool to evaluate the influence of essential oil on the surface of loaded bilayered-nanoparticles

Increasing interest in nanoparticles of technological application has been improving their fabrication processes. The encapsulation of essential oils as bioactive compounds has proved to be an excellent alternative to the use of less environment friendly compounds. However, the difficulty of identifying their constitution and interaction with carrier agents have aroused scientific interest and a problem to overcome. Bilayer-based nanoparticles were developed using gelatin and poly-ε-caprolactone (PCL) aiming the encapsulation ofPiper nigrumessential oil. based on atomic force microscopy images and dynamic light scattering analysis, the size of the unloaded and loaded nanoparticles was found around (194 ± 40) and (296 ± 54) nm, respectively. The spatial patterns revealed that the surface of nanoparticles presented different surface roughness, similar shapes and height distribution asymmetry, lower dominant spatial frequencies, and different spatial complexity. Traditional infrared spectroscopy allowed the identification of the nanoparticle outermost layer formed by the gelatin carrier, but microscopy-based infrared spectroscopy revealed a band at 1742 cm^-1related to the carbonyl stretching mode of PCL, as well as a band at 1557 cm^-1due to the amide II group from gelatin. The combination of microscopy and spectroscopy techniques proved to be an efficient alternative to quickly identify differences in chemical composition by evaluating different functional groups in bilayer PLC/gelatin nanoparticles of technological application.

Design of V-shaped cantilevers for enhanced multifrequency AFM measurements

As the application of atomic force microscopy (AFM) in soft matter characterization has expanded, the use of different types of cantilevers for these studies have also increased. One of the most common types of cantilevers used in soft matter imaging is V-shaped cantilevers due to their low normal spring constant. These types of cantilevers are also suitable for nanomanipulation due to their high lateral spring constants. The combination of low normal spring constant and high lateral spring constants makes V-shaped cantilevers promising candidates for imaging soft matter. Although these cantilevers are widely used in the field, there are no studies on the static and dynamic behavior of V-shaped cantilevers in multifrequency AFM due to their complex geometry. In this work, the static and dynamic properties of V-shaped cantilevers are studied while investigating their performance in multifrequency AFM (specifically bimodal AFM). By modeling the cantilevers based on Timoshenko beam theory, the geometrical dimensions such as length, base width, leg width and thickness are studied. By finding the static properties (mass, spring constants) and dynamic properties (resonance frequencies and quality factors) for different geometrical dimensions, the optimum V-shaped cantilever that can provide the maximum phase contrast in bimodal AFM between gold (Au) and polystyrene (PS) is found. Based on this study, it is found that as the length of the cantilever increases the 2nd eigenmode phase contrast decreases. However, the base width exhibits the opposite relationship. It is also found that the leg width does not have a monotone relationship similar to length and base width. The phase contrast increases for the range of 14 to 32 µm but decreases afterwards. The thickness of a V-shaped cantilever does not play a major role in defining the dynamics of the cantilever compared to other parameters. This work shows that in order to maximize the phase contrast, the ratio of second to first eigenmode frequencies should be minimized and be close to a whole number. Additionally, since V-shaped cantilevers are mostly used for soft matter imaging, lower frequency ratios dictate lower spring constant ratios, which can be advantageous due to lower forces applied to the surface by the tip given a sufficiently high first eigenmode frequency. Finally, two commercially available V-shaped cantilevers are theoretically and experimentally benchmarked with an optimum rectangular cantilever. Two sets of bimodal AFM experiments are carried out on Au-PS and PS-LDPE (polystyrene and low-density polyethylene) samples to verify the simulation results.

Graphene Oxide-Induced Interfacial Transcrystallization of Single-Fiber Milkweed/Polycaprolactone/Polyvinylchloride Composites

Understanding the interfacial crystallization is crucial for semi-crystalline polymer/natural fiber composites because it links to the final properties. This work reports, for the first time, the interfacial crystallization of a miscible blend between polycaprolactone (PCL) and polyvinylchloride (PVC) with milkweed fibers. We have first described the morphology of the fibers and the chemical composition of waxes covered on its surface. Our findings show that the transcrystallization (TC) layer of PCL/PVC could appear at the interface by simply coating with a layer of graphene oxide (GO) on the milkweed fiber. In our study, atomic force microscopy-infrared spectroscopy analysis shows that the crystallinity of the blends is higher at the vicinity of the interface compared to that in the bulk. The kinetic of the interfacial crystallization in terms of spherulite morphology and crystal growth rates at the nanoscale is examined. X-ray photoelectron spectroscopy and high-resolution transmission electron microscopy were used to analyze the prepared GO and evaluate its relationship with the interfacial crystallization behavior of the blends.

Nanoscale infrared probing of amyloid formation within the pleomorphic adenoma tissue

BACKGROUND

The process of malignant transformations of many tumour cases is still unclear and more specific experimental approaches are necessary. The detailed identification of the pathological changes may help in the therapy progression through the development of drugs with more selective action.

METHODS

In this study, the AFM-IR nanospectroscopy was applied for the first time to the pleomorphic adenoma (TM) and the marginal tissue characterizations. In order to verify the obtained spectral information, conventional FT-IR investigations were also performed.

RESULTS

The AFM-IR data (topographies, intensity maps, and spectra) show structural changes observed for the margin and TM samples. Additionally, within the tumour tissue the fibril-like areas, characteristic for amyloid diseases, were distinguished.

CONCLUSIONS

The application of AFM-IR allows to determine changes in the protein secondary structures between the fibrils and the regions outside them. It has been proved that, for the former areas, the α-helix/random coil/ β-sheet components dominate, while for the latter regions the α-helix/random coil indicate the main contribution to the protein composition.

GENERAL SIGNIFICANCE

The FT-IR results remain in good agreement with the AFM-IR data recorded for the areas outside the fibrils of the TM. This observation confirms that by means of the conventional FT-IR method the identification of the considered fibrils structure would be impossible. Only application of the AFM-IR nanospectroscopy allow for characterization and visualization of the fibrillization process occurring within the investigated tumour tissue.