Patient-specific hip geometry has greater effect on THA wear than femoral head size

European Database of Explanted UHMWPE Liners from Total Joint Replacements: Correlations among Polymer Modifications, Structure, Oxidation, Mechanical Properties and Lifetime In Vivo

This contribution lays the foundation for the European database of explanted UHMWPE liners from total joint replacements. Three EU countries (Czech Republic, Italy and Spain) have joined their datasets containing anonymized patient data (such as age and BMI), manufacturer data (such as information on UHMWPE crosslinking, thermal treatment and sterilization), orthopedic evaluation (such as total duration of the implant in vivo and reasons for its revision) and material characterization (such as oxidative degradation and micromechanical properties). The joined database contains more than 500 entries, exhibiting gradual growth, and it is beginning to show interesting trends, which are discussed in our contribution, including (i) strong correlations between UHMWPE oxidative degradation, degree of crystallinity and microhardness; (ii) statistically significant differences between UHMWPE liners with different types of sterilization; (iii) realistic correlations between the extent of oxidative degradation and the observed reasons for total joint replacement failures. Our final objective and task for the future is to continuously expand the database, involving researchers from other European countries, in order to create a robust tool that will contribute to the better understanding of structure-properties-performance relationships in the field of arthroplasty implants.

Restoration of hip geometry after total hip arthroplasty: retrospective comparison of two short stems and one straight stem

BACKGROUND

The preservation or restoration of hip geometry following total hip arthroplasty (THA) is of importance, considering that alterations in the centrum-collum-diaphysis (CCD)-angle, femoral offset (FO), acetabular offset (AO) and total offset (TO) change hip biomechanics. Therefore, the most suitable implant should be used. The aim of this study was to compare the ability of two short-stem-systems and one straight-stem-system to reconstruct hip geometry.

METHODS

Two-hundred-fifty-one patients (mean age: 62.0 ± 10.0 years; 51.8% males) undergoing THA with three different stem types were retrospectively included, after excluding 11 patients with missing radiological follow-up. Pre- and postoperative radiographic images (group I, ANA.NOVA Alpha Schaft Proxy®, ImplanTec, 12 options: n = 99; group II, Optimys® Mathys, 24 options: n = 62; group III: Corail®-System, DePuy-Synthes, 76 options: n = 90) were analyzed. Differences in pre- and postoperative hip geometry (i.e. CCD, FO, AO, TO) were compared between groups with one-way-analysis-of-variance (ANOVA), and post-hoc t-tests.

RESULTS

The CCD-angle increased by a mean of 8.4° ± 7.2° from pre-to postoperative, with no significant difference between groups (p = 0.097). Significantly larger increases in FO were observed for groups II (4.1 mm ± 7.8 mm) and III (4.9 ± 7.2 mm), in comparison to group I (1.6 ± 6.9 mm; p = 0.006). AO decreased by a mean of 2.2 ± 4.5 mm, with the largest decrease observed in group III (-3.3 ± 5.3 mm), and the smallest for group I (-1.4 ± 3.6 mm; p = 0.011). There was no significant difference in change of TO between groups (p = 0.177).

CONCLUSIONS

Reconstruction of hip geometry using a single-version novel short-stem-system is achievable with comparable results to stem-systems offering multiple options.

The effect of structural parameters of total hip arthroplasty on polyethylene liner wear behavior: A theoretical model analysis

Using large femoral heads in total hip arthroplasty (THA) has been widely advocated to improve the function and longevity of the components. However, increasing the head size has been shown to accelerate polyethylene liner wear. Few studies have investigated the effect of other important structural parameters (such as polyethylene liner thickness, metal cup size, head-liner conformity, loading conditions, etc.) on the biomechanical functions of the THAs. In this study, an analytical model was used to evaluate the polyethylene liner wear characteristics of the THAs (defined using a biomechanical wear factor) with various structural parameters of the THAs and loading conditions. For all the THA systems examined in this study, under the same loading conditions, a larger head leads to increasing contact areas, lower contact stresses, and higher biomechanical wear factors. When the head size is fixed, a decrease in the polyethylene liner thickness or a decrease in the head-liner conformity leads to higher peak contact stresses and smaller contact areas and consequently, lower biomechanical wear factors. This study provides a parametric analysis tool for the optimal design/selection of the THA systems and for prediction of early effects of various structural parameters on the biomechanical function (such as contact stresses) and longevity (such as polyethylene liner wear) of the THA systems.