Comprehension of terminal differentiation and dedifferentiation of chondrocytes during passage cultures

Primary Human Chondrocytes Affected by Cigarette Smoke-Therapeutic Challenges

Although several researchers have attested deleterious effects of smoking to the musculoskeletal system, the association between smoking and the onset of osteoarthritis (OA) remains unclear. Here, we investigate the effect of cigarette smoke extract (CSE) on primary human chondrocytes. The present study demonstrates that physiological concentrations of CSE (0.1%-10%) inhibit the viability, proliferation, and matrix formation of chondrocytes in a dose- and time-dependent manner. Significant amounts of free radicals were generated by 10% of CSE and led to cell death. A clinical dosage (4 mg/mL) of dexamethasone (Dex) showed toxic effects on chondrocytes, and the long-time treatment by lower doses (4-400 μg/mL) induced hypertrophic changes in the chondrocytes. To substitute Dex, diclofenac (Dic, 1 μg/mL) and acetaminophen (Ace, 10 μg/mL) were tested and did not worsen the metabolic activity of CSE-exposed chondrocytes. Hyaluronic acid (HA, 5 mg/mL) combined with Dic or Ace significantly inhibited the oxidative stress and enhanced the viability and matrix formation of CSE-exposed chondrocytes. This study shows for the first time that CSE mediates the disruption of cartilage through inducing cell death by increasing oxidative stress, and that this effect is fortified by Dex. The deleterious effects of CSE on chondrocytes could be reversed by treatment with HA combined with first-line analgesic/anti-inflammatory agents.

Assessment of Scaffolding Properties for Chondrogenic Differentiation of Adipose-Derived Mesenchymal Stem Cells in Nasal Reconstruction

Importance

Nasal reconstruction in patients who are missing a significant amount of structural nasal support remains a difficult challenge. One challenge is the deficiency of cartilage left within the nose as a consequence of rhinectomy or a midline destructive disease. Historically, the standard donor source for large quantities of native cartilage has been costal cartilage.

Objective

To enable the development of protocols for new mesenchymal stem cell technologies as alternative procedures with reduced donor site morbidity, risk of infection and extrusion.

Design, Setting, and Materials

We examined 6 popular scaffold materials in current practice in terms of their biodegradability in tissue culture, effect on adipose-derived mesenchymal stem cell growth, and chondrogenic fate commitment. Various biomaterials of matching size, porosity, and fiber alignment were synthesized by electrospinning and overlaid with rabbit adipose-derived mesenchymal cells in media supplemented or not with chondrogenic factors. Experiments were performed in vitro using as end points biomarkers for cell growth and chondrogenic differentiation. Polydioxanone (PDO), poly-3-hydroxybutyrate-co-3-hydroxyvalerate (PHBV), PHBV-polycaprolactone, poly(L-lactide-co-caprolactone), poly(lactic-co-glycolic acid), and polystyrene scaffolds of 60% to 70% porosity and random fiber alignment were coated with poly(L)-lysine/laminin to promote cell adhesion and incubated for 28 days with 2.5 to 3.5 × 105 rabbit adipose mesenchymal cells.

Main Outcomes and Measures

Cell growth was measured by fluorometric DNA quantitation and chondrogenic differentiation of stem cells by spectrophotometric sulfated glycosaminoglycan (sGAG) assay. Microscopic visualization of cell growth and matrix deposition on formalin-fixed, paraffin-embedded tissue sections was performed, respectively, with nuclear fast red and Alcian blue.

Results

Of 6 scaffold materials tested using rabbit apidose mesenchymal cells, uncoated scaffolds promoted limited cell adhesion but coating with poly(L)-lysine/laminin enabled efficient cell saturation of scaffold surfaces, albeit with limited involvement of scaffold interiors. Similar growth rates were observed under these conditions, based on DNA content analysis. However, PDO and PHBV/PCL scaffolds supported chondrogenic fate commitment better than other materials, based on soluble sGAG analysis and microscopic observation of chondrogenic matrix deposition. The mean (SD) sGAG scaffold values expressed as fold increase over control were PDO, 2.26 (0.88), PHBV/PCL, 2.09 (0.83), PLCL, 1.36 (0.39), PLGA, 1.34 (0.77), PHBV, 1.07 (0.31), and PS, 0.38 (0.14).

Conclusions and Relevance

These results establish materials, reagents, and protocols for tissue engineering for nasal reconstruction using single-layer, chondrogenically differentiated, adipose-derived mesenchymal stem cells. Stackable, scaffold-supported, multisheet bioengineered tissue may be generated using these protocols.

Level of Evidence

NA.

Past, present, and future of microcarrier-based tissue engineering

The top issue in tissue engineering is how to obtain more seed cells quickly and to preserve their characteristic morphology during in vitro expansion culture of cells. Microcarriers can help to amplify cell numbers and maintain the appropriate phenotype for tissue repair and restoration of function. In addition, microtissue with cell microcarriers can be used to repair diseased tissues or organs. This review introduces the materials used for, and classification of, microcarriers and the improvements in, and potential applications of, microtissues with cell microcarriers in tissue engineering.

Preclinical study of SZ2080 material 3D microstructured scaffolds for cartilage tissue engineering made by femtosecond direct laser writing lithography

Over the last decade DLW employing ultrafast pulsed lasers has become a well-established technique for the creation of custom-made free-form three-dimensional (3D) microscaffolds out of a variety of materials ranging from proteins to biocompatible glasses. Its potential applications for manufacturing a patient's specific scaffold seem unlimited in terms of spatial resolution and geometry complexity. However, despite few exceptions in which live cells or primitive organisms were encapsulated into a polymer matrix, no demonstration of an in vivo study case of scaffolds generated with the use of such a method was performed. Here, we report a preclinical study of 3D artificial microstructured scaffolds out of hybrid organic-inorganic (HOI) material SZ2080 fabricated using the DLW technique. The created 2.1 × 2.1 × 0.21 mm(3) membrane constructs are tested both in vitro by growing isolated allogeneic rabbit chondrocytes (Cho) and in vivo by implanting them into rabbit organisms for one, three and six months. An ex vivo histological examination shows that certain pore geometry and the pre-growing of Cho prior to implantation significantly improves the performance of the created 3D scaffolds. The achieved biocompatibility is comparable to the commercially available collagen membranes. The successful outcome of this study supports the idea that hexagonal-pore-shaped HOI microstructured scaffolds in combination with Cho seeding may be successfully implemented for cartilage tissue engineering.

Stem cell-based tissue engineering approaches for musculoskeletal regeneration

The field of regenerative medicine and tissue engineering is an ever evolving field that holds promise in treating numerous musculoskeletal diseases and injuries. An important impetus in the development of the field was the discovery and implementation of stem cells. The utilization of mesenchymal stem cells, and later embryonic and induced pluripotent stem cells, opens new arenas for tissue engineering and presents the potential of developing stem cell-based therapies for disease treatment. Multipotent and pluripotent stem cells can produce various lineage tissues, and allow for derivation of a tissue that may be comprised of multiple cell types. As the field grows, the combination of biomaterial scaffolds and bioreactors provides methods to create an environment for stem cells that better represent their microenvironment for new tissue formation. As technologies for the fabrication of biomaterial scaffolds advance, the ability of scaffolds to modulate stem cell behavior advances as well. The composition of scaffolds could be of natural or synthetic materials and could be tailored to enhance cell self-renewal and/or direct cell fates. In addition to biomaterial scaffolds, studies of tissue development and cellular microenvironments have determined other factors, such as growth factors and oxygen tension, that are crucial to the regulation of stem cell activity. The overarching goal of stem cell-based tissue engineering research is to precisely control differentiation of stem cells in culture. In this article, we review current developments in tissue engineering, focusing on several stem cell sources, induction factors including growth factors, oxygen tension, biomaterials, and mechanical stimulation, and the internal and external regulatory mechanisms that govern proliferation and differentiation.

Acid ceramidase maintains the chondrogenic phenotype of expanded primary chondrocytes and improves the chondrogenic differentiation of bone marrow-derived mesenchymal stem cells

Acid ceramidase is required to maintain the metabolic balance of several important bioactive lipids, including ceramide, sphingosine and sphingosine-1-phosphate. Here we show that addition of recombinant acid ceramidase (rAC) to primary chondrocyte culture media maintained low levels of ceramide and led to elevated sphingosine by 48 hours. Surprisingly, after three weeks of expansion the chondrogenic phenotype of these cells also was markedly improved, as assessed by a combination of histochemical staining (Alcian Blue and Safranin-O), western blotting (e.g., Sox9, aggrecan, collagen 2A1), and/or qPCR. The same effects were evident in rat, equine and human cells, and were observed in monolayer and 3-D cultures. rAC also reduced the number of apoptotic cells in some culture conditions, contributing to overall improved cell quality. In addition to these effects on primary chondrocytes, when rAC was added to freshly harvested rat, equine or feline bone marrow cultures an ∼2-fold enrichment of mesenchymal stem cells (MSCs) was observed by one week. rAC also improved the chondrogenic differentiation of MSCs, as revealed by histochemical and immunostaining. These latter effects were synergistic with TGF-beta1. Based on these results we propose that rAC could be used to improve the outcome of cell-based cartilage repair by maintaining the quality of the expanded cells, and also might be useful in vivo to induce endogenous cartilage repair in combination with other techniques. The results also suggest that short-term changes in sphingolipid metabolism may lead to longer-term effects on the chondrogenic phenotype.

A mixed co-culture of mesenchymal stem cells and transgenic chondrocytes in alginate hydrogel for cartilage tissue engineering

To regenerate articular cartilage tissue from degeneration and trauma, synovial mesenchymal stem cells (SMSCs) were used in this study as therapeutic progenitor cells to induce therapeutic chondrogenesis. To accomplish this, chondrocytes pre-transduced with adenoviral vectors carrying the transforming growth factor (TGF) β3 gene were selected as transgenic companion cells and co-cultured side-by-side with SMSCs in a 3D environment to provide chondrogenic growth factors in situ. We adopted a mixed co-culture strategy for this purpose. Transgenic delivery of TGF-β3 in chondrocytes was performed via recombinant adenoviral vectors. The mixed co-culture of SMSCs and transgenic chondrocytes was produced in alginate gel constructs. Gene expression in both SMSCs and chondrocytes were characterized. Biochemical assays in vitro and in vivo showed that release of TGF-ß3 from transgenic chondrocytes not only induced SMSC differentiation into chondrocytic cells but also preserved the chondrocytic phenotype of chondrocytes from suspected dedifferentiation. As a result, this mixed co-culture strategy in conjunction with TGF-ß3 gene delivery could be a promising approach in cartilage tissue engineering.

Substrate stiffness modulates gene expression and phenotype in neonatal cardiomyocytes in vitro

Biomaterials to be used as cell delivery systems for cardiac tissue engineering should be able to comply with cardiac muscle contractile activity, while favoring cell survival and neo-angiogenesis in a hostile environment. Biocompatible synthetic materials can be tailored to mimic cardiac tissue three-dimensional organization in the micro- and nanoscales. Nonetheless, they usually display mechanical properties that are far from those of the native myocardium and thus could affect host cell survival and activity. In the present investigation, inert poly-ε-caprolactone planar layers were manufactured to change the surface stiffness (with Young's modulus ranging from 1 to 133 MPa) without changing matrix chemistry. These substrates were challenged with neonatal murine cardiomyocytes to study the possible effect of substrate stiffness on such cell behavior without changing biological cues. Interestingly, softer substrates (0.91±0.08 and 1.53±0.16 MPa) were found to harbor mostly mature cardiomyocytes having assembled sarcomeres, as shown by the expression of alpha actinin and myosin heavy chain in typical striations and the upregulation of sarcomeric actin mRNA. On the other hand, a preferential expression of immature cardiac cell genes (Nkx-2.5) and proteins (GATA-4) in cardiac cells grown onto stiffer materials (49.67±2.56 and 133.23±8.67 MPa) was detected. This result could not be ascribed to significant differences in cell adhesion or proliferation induced by the substrates, but to the stabilization of cardiomyocyte differentiated phenotype induced by softer layers. In fact, cardiac cell electromechanical coupling was shown to be more organized on softer surfaces, as highlighted by connexin 43 distribution. Moreover, a differential regulation of genes involved in extracellular matrix remodeling was detected on soft films (0.91±0.08 MPa) as compared with the stiffest (133.23±8.67 MPa). Finally, the upregulation of a number of genes involved in inflammatory processes was detected when the stiffest polymer is used. These events highlight the differences in cell mechanosensitivity in a heterogeneous cell preparation and are likely to contribute to the differences encountered in cardiac cell phenotype induced by substrate stiffness.