Identification and characterization of an acetyl xylan esterase from Aspergillus oryzae

Design strategies for novel esterase purification processes from Trichoderma harzianum-An insight into kinetic and thermodynamic analyses

Designing purification strategies for the fermentation derived enzymes is the most challenging task and require a thorough understanding on the physio-chemical properties of the target enzyme. The current investigation aims to establish purification strategies for a novel esterase from Trichoderma harzianum followed by their kinetic and thermodynamic analyses. The highest esterase purification fold of 6.65 was observed with the acetone-based precipitation at 60 % (v/v) saturation level among other precipitation studies. Further, using Taguchi orthogonal design, the optimal composition of an aqueous two-phase system consisting of PEG 6000 (30 % w/w), sodium citrate (15 %, w/w), sodium chloride (10 %, w/w), and pH (7.0) was obtained that resulted in the esterase purification fold of 3.93. A higher esterase purification fold of 20.47 was obtained using size exclusion chromatography technique. The optimal temperature and pH for the maximum activity of purified esterase were found to be 30 °C and 7, respectively. The thermal deactivation of esterase was followed the first order rate kinetics for the temperature range from 323 K to 353 K. The activation energy (Ea), enthalpy (ΔH), and entropy (ΔS) of thermal denaturation of esterase were estimated to be 69 (kJ/mol), 66.29 (kJ/mol), and 1.21(kJ/mol.K), respectively. The addition of solvents such as ethanol, methanol, acetone, and chloroform at 50 % (v/v) and metal ions, such as calcium chloride, sodium chloride, and zinc sulphate at 1 mM enhanced the esterase activity. Esterase had a higher affinity towards p-nitrophenyl acetate as compared to other short and long-chain fatty acid substrates as observed from the turnover number and Michaelis-Menten kinetic constants. Furthermore, the relative molecular weight of esterase was estimated around 75 kDa using native and SDS-PAGE electrophoresis.

Identification and structural characterization of a novel acetyl xylan esterase from Aspergillus oryzae

Acetyl xylan esterase plays a crucial role in the degradation of xylan, the major plant hemicellulose, by liberating acetic acid from the backbone polysaccharides. Acetyl xylan esterase B from Aspergillus oryzae, designated AoAxeB, was biochemically and structurally investigated. The AoAxeB-encoding gene with a native signal peptide was successfully expressed in Pichia pastoris as an active extracellular protein. The purified recombinant protein had pH and temperature optima of 8.0 and 30 °C, respectively, and was stable up to 35 °C. The optimal substrate for hydrolysis by purified recombinant AoAxeB among a panel of α-naphthyl esters was α-naphthyl acetate. Recombinant AoAxeB catalyzed the release of acetic acid from wheat arabinoxylan. The release of acetic acid from wheat arabinoxylan increased synergistically with xylanase addition. No activity was detected for the methyl esters of ferulic, p-coumaric, caffeic, or sinapic acids. The crystal structures of AoAxeB in the apo and succinate complexes were determined at resolutions of 1.75 and 1.90 Å, respectively. Although AoAxeB has been classified in the Esterase_phb family in the ESTerases and alpha/beta-Hydrolase Enzymes and Relatives (ESTHER) database, its structural features partly resemble those of ferulic acid esterase in the FaeC family. Phylogenetic analysis also indicated that AoAxeB is located between the clades of the two families. Docking analysis provided a plausible binding mode for xylotriose substrates acetylated at the 2- or 3-hydroxy position. This study expands the current knowledge of the structures of acetyl xylan esterases and ferulic acid esterases that are required for complete plant biomass degradation.

Production of acetic acid from wheat bran by catalysis of an acetoxylan esterase

In this study, a gene encoding for acetylxylan esterase was cloned and expressed in E. coli. A single uniform band with molecular weight of 31.2 kDa was observed in SDS-PAGE electrophoresis. Served as the substrate, p-nitrophenol butyrate was employed to detect the recombinant enzyme activity. It exhibited activity at a wide temperature range (30-100 °C) and pH (5.0-9.0) with the optimal temperature of 70 °C and pH 8.0. Acetylxylan esterase showed two substrates' specificities with the highest Vmax of 177.2 U/mg and Km of 20.98 mM against p-nitrophenol butyrate. Meanwhile, the Vmax of p-nitrophenol acetate was 137.0 U/mg and Km 12.16 mM. The acetic acid yield of 0.39 g/g was obtained (70 °C and pH 8.0) from wheat bran pretreated using amylase and papain. This study showed the highest yield up to date and developed a promising strategy for acetic acid production using wheat bran.

Plant polysaccharide degradation-related enzymes in Aspergillus oryzae

Plants synthesize large amounts of stored and structural polysaccharides. Aspergillus oryzae is used in traditional Japanese fermentation and produces many types of plant polysaccharide degradation-related enzymes. The carbohydrate-active enzymes of A. oryzae are important in the fermentation process and biotechnological applications. Because plant polysaccharides have a complex structure, cooperative and synergistic actions of enzymes are crucial for the degradation of plant polysaccharides. For example, the cooperative action of isoprimeverose-producing oligoxyloglucan hydrolase, β-galactosidase, and α-xylosidase is important for the degradation of xyloglucan, and A. oryzae coordinates these enzymes at the expression level. In this review, I focus on the plant polysaccharide degradation-related enzymes identified in A. oryzae.

Enhanced Activity and Stability of an Acetyl Xylan Esterase in Hydrophilic Alcohols through Site-Directed Mutagenesis

Current demands for the development of suitable biocatalysts showing high process performance is stimulated by the need to replace current chemical synthesis with cleaner alternatives. A drawback to the use of biocatalysts for unique applications is their low performance in industrial conditions. Hence, enzymes with improved performance are needed to achieve innovative and sustainable biocatalysis. In this study, we report the improved performance of an engineered acetyl xylan esterase (BaAXE) in a hydrophilic organic solvent. The structure of BaAXE was partitioned into a substrate-binding region and a solvent-affecting region. Using a rational design approach, charged residues were introduced at protein surfaces in the solvent-affecting region. Two sites present in the solvent-affecting region, A12D and Q143E, were selected for site-directed mutagenesis, which generated the mutants MUT12, MUT143 and MUT12-143. The mutants MUT12 and MUT143 reported lower Km (0.29 mM and 0.27 mM, respectively) compared to the wildtype (0.41 mM). The performance of the mutants in organic solvents was assessed after enzyme incubation in various strengths of alcohols. The mutants showed improved activity and stability compared to the wild type in low strengths of ethanol and methanol. However, the activity of MUT143 was lost in 40% methanol while MUT12 and MUT12-143 retained over 70% residual activity in this environment. Computational analysis links the improved performance of MUT12 and MUT12-143 to novel intermolecular interactions that are absent in MUT143. This work supports the rationale for protein engineering to augment the characteristics of wild-type proteins and provides more insight into the role of charged residues in conferring stability.

Enzymatic Treatments for Biosolids: An Outlook and Recent Trends

Wastewaters are nutrient-rich organic materials containing significant concentrations of different nutrients, dissolved and particulate matter, microorganisms, solids, heavy metals, and organic pollutants, including aromatic xenobiotics. This variety makes wastewater treatment a technological challenge. As a result of wastewater treatment, biosolids are generated. Biosolids, commonly called sewage sludge, result from treating and processing wastewater residuals. Increased biosolids, or activated sludge, from wastewater treatment is a major environmental and social problem. Therefore, sustainable and energy-efficient wastewater treatment systems must address the water crisis and environmental deterioration. Although research on wastewater has received increasing attention worldwide, the significance of biosolids treatments and valorization is still poorly understood in terms of obtaining value-added products. Hence, in this review, we established some leading technologies (physical, chemical, and biological) for biosolids pretreatment. Later, the research focuses on natural treatment by fungal enzymes to end with lignocellulosic materials and xenobiotic compounds (polyaromatic hydrocarbons) as a carbon source to obtain biobased chemicals. Finally, this review discussed some recent trends and promising renewable resources within the biorefinery approach for bio-waste conversion to value-added by-products.

Gelation of konjac glucomannan by acetylmannan esterases from Aspergillus oryzae

Konjac glucomannan (KGM) is a principal component of the gelatinous food Konjac. Konjac production through alkali treatment releases an undesirable amine-odor. Two acetylesterases (AME1 and AME2) active against konjac glucomannan (polymer or oligomer) were purified from the supernatant of Aspergillus oryzae RIB40 culture. We cloned the genes encoding AME1 and AME2 based on the genomic information of A. oryzae, constructed their expression systems in A. oryzae, and obtained the recombinant enzymes (rAME1 and rAME2). rAME1 did not act on the KGM polymer but only on the KGM oligomer, releasing approximately 60% of the acetic acid in the substrate. However, rAME2 was active against both KGM substrates, releasing approximately 80% and 100% of acetic acid from the polymer and oligomer, respectively. Both enzymes were active against xylan and exhibited a trace activity on ethyl ferulate. The acetyl group position specificities of both enzymes were analyzed via heteronuclear single quantum correlation NMR using oligosaccharides of glucomannan prepared from Aloe vera (AGM), which has a higher acetyl group content than KGM. rAME1 acted specifically on single-substituted acetyl groups and not on double-substituted ones. In contrast, rAME2 appeared to act on all the acetyl groups in AGM. Treatment of 3% KGM with rAME2 followed by heating to 90 °C resulted in gel formation under weakly acidic conditions. This is the first study to induce gelation of KGM under these conditions. A comparison of the breaking and brittleness properties of gels formed by alkaline and enzymatic treatments revealed similar texture of the two gels. Furthermore, scanning electron microscopy of the surface structure of both gels revealed that both formed a fine mesh structure. Our findings on enzymatic gelation of KGM should lead to the development of new applications in food manufacturing industry.

Characterisation of a Novel Acetyl Xylan Esterase (BaAXE) Screened from the Gut Microbiota of the Common Black Slug (Arion ater)

Acetyl xylan esterases (AXEs) are enzymes capable of hydrolysing the acetyl bonds in acetylated xylan, allowing for enhanced activity of backbone-depolymerizing enzymes. Bioprospecting novel AXE is essential in designing enzyme cocktails with desired characteristics targeting the complete breakdown of lignocellulose. In this article, we report the characterisation of a novel AXE identified as Gene_id_40363 in the metagenomic library analysed from the gut microbiota of the common black slug. The conserved domain description was identified with an NCBI BLASTp search using the translated nucleotide sequence as a query. The activity of the recombinant enzyme was tested on various synthetic substrates and acetylated substrates. The protein sequence matched the conserved domain described as putative hydrolase and aligned closely to an uncharacterized esterase from Buttiauxella agrestis, hence the designation as BaAXE. BaAXE showed low sequence similarity among characterized CE family proteins with an available 3D structure. BaAXE was active on 4-nitrophenyl acetate, reporting a specific activity of 78.12 U/mg and a Km value of 0.43 mM. The enzyme showed optimal activity at 40 °C and pH 8 and showed high thermal stability, retaining over 40% activity after 2 h of incubation from 40 °C to 100 °C. BaAXE hydrolysed acetyl bonds, releasing acetic acid from acetylated xylan and β-D-glucose pentaacetate. BaAXE has great potential for biotechnological applications harnessing its unique characteristics. In addition, this proves the possibility of bioprospecting novel enzymes from understudied environments.