Sequencing and comparative analysis of IncP-1α antibiotic resistance plasmids reveal a highly conserved backbone and differences within accessory regions

Beyond horizontal gene transfer: the role of plasmids in bacterial evolution

Plasmids have a key role in bacterial ecology and evolution because they mobilize accessory genes by horizontal gene transfer. However, recent studies have revealed that the evolutionary impact of plasmids goes above and beyond their being mere gene delivery platforms. Plasmids are usually kept at multiple copies per cell, producing islands of polyploidy in the bacterial genome. As a consequence, the evolution of plasmid-encoded genes is governed by a set of rules different from those affecting chromosomal genes, and these rules are shaped by unusual concepts in bacterial genetics, such as genetic dominance, heteroplasmy or segregational drift. In this Review, we discuss recent advances that underscore the importance of plasmids in bacterial ecology and evolution beyond horizontal gene transfer. We focus on new evidence that suggests that plasmids might accelerate bacterial evolution, mainly by promoting the evolution of plasmid-encoded genes, but also by enhancing the adaptation of their host chromosome. Finally, we integrate the most relevant theoretical and empirical studies providing a global understanding of the forces that govern plasmid-mediated evolution in bacteria.

Tn6603, a Carrier of Tn5053 Family Transposons, Occurs in the Chromosome and in a Genomic Island of Pseudomonas aeruginosa Clinical Strains

Transposons of the Pseudomonasaeruginosa accessory gene pool contribute to phenotype and to genome plasticity. We studied local P. aeruginosa strains to ascertain the encroachment of mer-type res site hunter transposons into clinical settings and their associations with other functional modules. Five different Tn5053 family transposons were detected, all chromosomal. Some were solitary elements; one was in res of Tn1013^#, a relative of a reported carrier of int-type res site hunters (class 1 integrons), but most were in res of Tn6603, a new Tn501-related transposon of unknown phenotype. Most of the Tn6603::Tn elements, and some Tn6603 and Tn6603::Tn elements found in GenBank sequences, were at identical sites in an hypothetical gene of P. aeruginosa genomic island PAGI-5v. The island in clonally differing strains was at either of two tRNA^Lys loci, suggesting lateral transfer to these sites. This observation is consistent with the membership of the prototype PAGI-5 island to the ICE family of mobile genetic elements. Additionally, the res site hunters in the nested transposons occupied different positions in the Tn6603 carrier. This suggested independent insertion events on five occasions at least. Tn5053 family members that were mer-/tni-defective were found in Tn6603- and Tn501-like carriers in GenBank sequences of non-clinical Pseudomonas spp. The transposition events in these cases presumably utilized tni functions in trans, as can occur with class 1 integrons. We suggest that in the clinical context, P. aeruginosa strains that carry Tn6603 alone or in PAGI-5v can serve to disseminate functional res site hunters; these in turn can provide the requisite trans-acting tni functions to assist in the dissemination of class 1 integrons, and hence of their associated antibiotic resistance determinants.

Analysis of Virulence Factors and Antimicrobial Resistance in Salmonella Using Molecular Techniques and Identification of Clonal Relationships Among the Strains

A total of 50 Salmonella enterica strains were isolated from clinical samples from 2009 to 2012 and analyzed for the presence of virulence genes found in SPI-1, SPI-2, and plasmids. The distribution and frequency of the antimicrobial resistance genes and plasmids were revealed, and pulsed-field gel electrophoresis (PFGE) patterns were investigated. Five genes were identified from the seven strains with resistance or intermediate resistance to ampicillin: blaSHV-1 (present in six strains), qnrS1 (present in five strains), blaTEM-1 (present in three strains), blaCTX-M-1 (present in one strain), and qnrB1 (present in one strain). One trimethoprim-sulfamethoxazole-resistant strain was positive for sulI but negative for sulII. In addition, we detected TEM-1 and qnrS1 in one strain; SHV-1 and qnrS1 in two strains; TEM-1, SHV-1, CTX-M-1, and qnrS1 in one strain; TEM-1, SHV-1, and qnrB1 in one strain; and SHV-1 and sulI genes in one strain together. Plasmid-based replicon typing assay revealed that all 50 strains carried FIIS, 13 carried I1, 1 carried I2, 4 carried P, 1 carried A/C, and 4 carried X1 replicon. PFGE was used to type 46 of the 50 strains and classify them into 22 major groups, 33 pulsotypes, and 8 major clusters. All strains carried all the virulence genes of interest on both Salmonella Pathogenicity Islands 1 and 2 and plasmids suggested high potential for pathogenicity. All antimicrobial-resistant strains contained at least one of the resistance genes of interest, confirming a phenotype-genotype association in antimicrobial resistance.

Genomic Tools for Customized Recovery and Detection of Foodborne Shiga Toxigenic Escherichia coli

Genomic antimicrobial resistance (AMR) prediction tools have the potential to support foodborne illness outbreak investigations through their application in the analysis of bacterial genomes from causative strains. The AMR marker profile of a strain of interest, initially identified in outbreak-associated clinical samples, may serve as the basis for customization of selective enrichment media, facilitating its recovery from samples in a food safety investigation. Different possibilities for AMR analyses include the use of comprehensive AMR gene databases such as the Comprehensive Antibiotic Resistance Database, which can be mined with in-house bioinformatics alignment tools (e.g., Antimicrobial Resistance Marker Identifier), or publicly available tools based on clinically relevant acquired AMR gene databases (e.g., ResFinder). In combination with a previously reported pipeline (SigSeekr) designed to identify specific DNA sequences associated with a particular strain for its rapid identification by PCR, it should be possible to deploy custom recovery and identification tools for the efficient detection of priority pathogens such as Shiga toxigenic Escherichia coli (STEC) outbreak strains within the time frame of an active investigation. Using a laboratory STEC strain as a model, trimethoprim resistance identified by both Antimicrobial Resistance Marker Identifier and ResFinder was used as the basis for its selective recovery against a background of commensal E. coli bacteria in ground beef samples. Enrichment in modified tryptic soy broth containing trimethoprim greatly enhanced the recovery of low numbers of model strain cells inoculated in ground beef samples, as verified by the enumeration of colonies on plating media using a strain-specific PCR method to determine the recovery efficiency for the target strain. We discuss the relative merits of different AMR marker prediction tools for this purpose and describe how such tools can be utilized to good effect in a typical outbreak investigation scenario.

Identification of novel toluene monooxygenase genes in a hydrocarbon-polluted sediment using sequence- and function-based screening of metagenomic libraries

The microbial potential for toluene degradation within sediments from a tar oil-contaminated site in Flingern, Germany, was assessed using a metagenomic approach. High molecular weight environmental DNA from contaminated sediments was extracted, purified, and cloned into fosmid and BAC vectors and transformed into Escherichia coli. The fosmid library was screened by hybridization with a PCR amplicon of the α-subunit of the toluene 4-monooxygenase gene to identify genes and pathways encoding toluene degradation. Fourteen clones were recovered from the fosmid library, among which 13 were highly divergent from known tmoA genes and several had the closest relatives among Acinetobacter species. The BAC library was transferred to the heterologous hosts Cupriavidus metallidurans (phylum Proteobacteria) and Edaphobacter aggregans (phylum Acidobacteria). The resulting libraries were screened for expression of toluene degradation in the non-degradative hosts. From expression in C. metallidurans, three novel toluene monooxygenase-encoding operons were identified that were located on IncP1 plasmids. The E. aggregans-hosted BAC library led to the isolation of a cloned genetic locus putatively derived from an Acidobacteria taxon that contained genes involved in aerobic and anaerobic toluene degradation. These data suggest the important role of plasmids in the spread of toluene degradative capacity and indicate putative novel tmoA genes present in this hydrocarbon-polluted environment.

Environmentally co-occurring mercury resistance plasmids are genetically and phenotypically diverse and confer variable context-dependent fitness effects

Plasmids are important mobile elements that can facilitate genetic exchange and local adaptation within microbial communities. We compared the sequences of four co‐occurring pQBR family environmental mercury resistance plasmids and measured their effects on competitive fitness of a Pseudomonas fluorescens  SBW25 host, which was isolated at the same field site. Fitness effects of carriage differed between plasmids and were strongly context dependent, varying with medium, plasmid status of competitor and levels of environmental mercury. The plasmids also varied widely in their rates of conjugation and segregational loss. We found that few of the plasmid‐borne accessory genes could be ascribed functions, although we identified a putative chemotaxis operon, a type IV pilus‐encoding cluster and a region encoding putative arylsulfatase enzymes, which were conserved across geographically distant isolates. One plasmid, pQBR55, conferred the ability to catabolize sucrose. Transposons, including the mercury resistance Tn5042, appeared to have been acquired by different pQBR plasmids by recombination, indicating an important role for horizontal gene transfer in the recent evolution of pQBR plasmids. Our findings demonstrate extensive genetic and phenotypic diversity among co‐occurring members of a plasmid community and suggest a role for environmental heterogeneity in the maintenance of plasmid diversity.

Characterization of the genetic environment of bla ESBL genes, integrons and toxin-antitoxin systems identified on large transferrable plasmids in multi-drug resistant Escherichia coli

Objectives: Previously 14 conjugative plasmids from multi-drug resistant (MDR) Escherichia coli from healthy humans and food-producing animals in Switzerland were sequenced. The aim of this study was to extend the genetic characterization of these plasmids with a focus on bla_ESBL genes including bla_CTX-M-1 and bla_TEM, class 1 integrons and toxin-antitoxin (TA) systems contained therein.

Methods: The nucleotide sequences and subsequent annotation therein of 14 conjugative plasmids were previously determined from their corresponding transconjugants. The TA loci were confirmed by RASTA-Bacteria.

Results: Eight of the conjugative plasmids identified were found to encode genes expressing ESBLs. Structural heterogeneity was noted in the regions flanking both the bla_CTX-M-1 and bla_TEM genes. The bla_CTX-M-1 genes were associated with the common insertion sequences ISEcp1 and IS26, and uniquely with an IS5 element in one case; while bla_TEM genes were found to be associated with IS26 and Tn2. A new bla_TEM-210 gene was identified. Seven class 1 integrons were also identified and assigned into 3 groups, denoted as In54, In369 and In501. Sixteen TA loci belonging to 4 of the TA gene families (relBE, vapBC, ccd and mazEF) were identified on 11 of these plasmids.

Conclusions: Comparative sequence analysis of these plasmids provided data on the structures likely to contribute to sequence diversity associated with these accessory genes, including IS26, ISEcp1 and Tn2. All of them contribute to the dissemination of the corresponding resistance genes located on the different plasmids. There appears to be no association between β-lactam encoding genes and TA systems.

IncH-type plasmid harboring bla CTX-M-15, bla DHA-1, and qnrB4 genes recovered from animal isolates

The whole sequence of plasmid pENVA carrying the extended-spectrum β-lactamase gene blaCTX-M-15 was determined. It was identified from a series of clonally related Klebsiella pneumoniae sequence type 274 strains recovered from companion animals. This plasmid was 253,984 bp in size and harbored, in addition to blaCTX-M-15, a large array of genes encoding resistance to many antibiotic molecules, including β-lactams (blaTEM-1, blaDHA-1), aminoglycosides (aacA2, aadA1), tetracycline (tetA), quinolones (qnrB4), trimethoprim (dfrA15), and sulfonamides (two copies of sul1). In addition, genes encoding resistance to mercury, tellurium, nickel, and quaternary compounds were identified. It also carried genes encoding DNA damage protection and mutagenesis repair and a locus for a CRISPR system, which corresponds to an immune system involved in protection against bacteriophages and plasmids. Comparative analysis of the plasmid scaffold showed that it possessed a structure similar to that of only a single plasmid, which was pNDM-MAR encoding the carbapenemase NDM-1 and identified from human K. pneumoniae isolates. Both plasmids possessed two replicons, namely, those of IncFIB-like and IncHIB-like plasmids, which were significantly different from those previously characterized. The blaCTX-M-15 gene, together with the other antibiotic resistance genes, was part of a large module likely acquired through a transposition process. We characterized here a new plasmid type carrying the blaCTX-M-15 gene identified in a K. pneumoniae isolate of animal origin. The extent to which this plasmid type may spread efficiently and possibly further enhance the dissemination of blaCTX-M-15 among animal and human isolates remains to be determined.

Characterization of new bacterial catabolic genes and mobile genetic elements by high throughput genetic screening of a soil metagenomic library

A mix of oligonucleotide probes was used to hybridize soil metagenomic DNA from a fosmid clone library spotted on high density membranes. The pooled radio-labeled probes were designed to target genes encoding glycoside hydrolases GH18, dehalogenases, bacterial laccases and mobile genetic elements (integrases from integrons and insertion sequences). Positive hybridizing spots were affiliated to the corresponding clones in the library and the metagenomic inserts were sequenced. After assembly and annotation, new coding DNA sequences related to genes of interest were identified with low protein similarity against the closest hits in databases. This work highlights the sensitivity of DNA/DNA hybridization techniques as an effective and complementary way to recover novel genes from large metagenomic clone libraries. This study also supports that some of the identified catabolic genes might be associated with horizontal transfer events.

Establishment and interpretation of the genome sequence of the phytopathogenic fungus Rhizoctonia solani AG1-IB isolate 7/3/14

Anastomosis group AG1-IB isolates of the anamorphic basidiomycetous fungus Rhizoctonia solani Kühn affect various agricultural and horticultural important crops including bean, rice, soybean, figs, hortensia, cabbage and lettuce. To gain insights into the genome structure and content, the first draft genome sequence of R. solani AG1-IB isolate 7/3/14 was established. Four complete runs on the Genome Sequencer (GS) FLX platform (Roche Applied Science) yielding approx. a 25-fold coverage of the R. solani genome were accomplished. Assembly of the sequence reads by means of the gsAssembler software version 2.6 applying the heterozygotic mode resulted in numerous contigs and scaffolds and a predicted size of 87.1 Mb for the diploid status of the genome. 'Contig-length vs. read-count' analysis revealed that the assembled contigs can be classified into five different groups. Detailed BLAST-analysis revealed that most contigs of group II feature high-scoring matches to other contigs of the same group suggesting that distinguishable allelic variants exist for many genes. Due to the supposed diploid and heterokaryotic nature of R. solani AG1-IB 7/3/14, this result has been anticipated. However, the heterokaryotic character of the isolate is not really supported by sequencing data obtained for the isolate R. solani AG1-IB 7/3/14. Coverage of group III contigs is twice as high as for group II contigs which can also be explained by the diploid status of the genome and indistinguishable alleles on homologous chromosomes. Assembly of sequence data led to the identification of the rRNA unit (group V contigs) and the mitochondrial (mt) genome (group IV contigs) which is a circular molecule of 162,751 bp in size featuring a GC-content of 36.4%. The R. solani 7/3/14 mt-genome is one of the largest fungal mitochondrial genomes known to date. Its large size essentially is due to the presence of numerous non-conserved hypothetical ORFs and introns. Gene prediction for the R. solani AG1-IB 7/3/14 genome was conducted by the Augustus Gene Prediction Software for Eukaryotes (version 2.6.) applying the parameter set for the fungus Coprinopsis cinerea okayama 7#130. Gene prediction and annotation provided first insights into the R. solani AG1-IB 7/3/14 gene structure and content. In total, 12,422 genes were predicted. The average number of exons per gene is five. Exons have a mean length of 214 bp, whereas introns on average are 66 bp in length. Annotation of the genome revealed that 4169 of 12,422 genes could be assigned to KOG functional categories.

Environmental and Public Health Implications of Water Reuse: Antibiotics, Antibiotic Resistant Bacteria, and Antibiotic Resistance Genes

Water scarcity is a global problem, and is particularly acute in certain regions like Africa, the Middle East, as well as the western states of America. A breakdown on water usage revealed that 70% of freshwater supplies are used for agricultural irrigation. The use of reclaimed water as an alternative water source for agricultural irrigation would greatly alleviate the demand on freshwater sources. This paradigm shift is gaining momentum in several water scarce countries like Saudi Arabia. However, microbial problems associated with reclaimed water may hinder the use of reclaimed water for agricultural irrigation. Of particular concern is that the occurrence of antibiotic residues in the reclaimed water can select for antibiotic resistance genes among the microbial community. Antibiotic resistance genes can be associated with mobile genetic elements, which in turn allow a promiscuous transfer of resistance traits from one bacterium to another. Together with the pathogens that are present in the reclaimed water, antibiotic resistant bacteria can potentially exchange mobile genetic elements to create the “perfect microbial storm”. Given the significance of this issue, a deeper understanding of the occurrence of antibiotics in reclaimed water, and their potential influence on the selection of resistant microorganisms would be essential. In this review paper, we collated literature over the past two decades to determine the occurrence of antibiotics in municipal wastewater and livestock manure. We then discuss how these antibiotic resistant bacteria may impose a potential microbial risk to the environment and public health, and the knowledge gaps that would have to be addressed in future studies. Overall, the collation of the literature in wastewater treatment and agriculture serves to frame and identify potential concerns with respect to antibiotics, antibiotic resistant bacteria, and antibiotic resistance genes in reclaimed water.

Broad-host-range IncP-1 plasmids and their resistance potential

The plasmids of the incompatibility (Inc) group IncP-1, also called IncP, as extrachromosomal genetic elements can transfer and replicate virtually in all Gram-negative bacteria. They are composed of backbone genes that encode a variety of essential functions and accessory genes that have implications for human health and environmental bioremediation. Broad-host-range IncP plasmids are known to spread genes between distinct phylogenetic groups of bacteria. These genes often code for resistances to a broad spectrum of antibiotics, heavy metals, and quaternary ammonium compounds used as disinfectants. The backbone of these plasmids carries modules that enable them to effectively replicate, move to a new host via conjugative transfer and to be stably maintained in bacterial cells. The adaptive, resistance, and virulence genes are mainly located on mobile genetic elements integrated between the functional plasmid backbone modules. Environmental studies have demonstrated the wide distribution of IncP-like replicons in manure, soils and wastewater treatment plants. They also are present in strains of pathogenic or opportunistic bacteria, which can be a cause for concern, because they may encode multiresistance. Their broad distribution suggests that IncP plasmids play a crucial role in bacterial adaptation by utilizing horizontal gene transfer. This review summarizes the variety of genetic information and physiological functions carried by IncP plasmids, which can contribute to the spread of antibiotic and heavy metal resistance while also mediating the process of bioremediation of pollutants. Due to the location of the resistance genes on plasmids with a broad-host-range and the presence of transposons carrying these genes it seems that the spread of these genes would be possible and quite hazardous in infection control. Future studies are required to determine the level of risk of the spread of resistance genes located on these plasmids.

The IncF plasmid pRSB225 isolated from a municipal wastewater treatment plant's on-site preflooder combining antibiotic resistance and putative virulence functions is highly related to virulence plasmids identified in pathogenic E. coli isolates

The IncF antibiotic resistance and virulence plasmid pRSB225, isolated from an unknown bacterium released with the purified wastewater from a municipal sewage treatment plant into the environment has been analysed at the genomic level by pyrosequencing. The 164,550bp plasmid comprises 210 coding sequences (cds). It is composed of three replicons (RepFIA, RepFIB, and RepFII) and encodes further plasmid-specific functions for stable maintenance and inheritance and conjugative plasmid transfer. The plasmid is self-transmissible and shows a narrow host range limited to the family Enterobacteriaceae. The accessory modules of the plasmid mainly comprise genes conferring resistance to ampicillin (bla(TEM-1b)), chloramphenicol (catA1), erythromycin (mphA), kanamycin and neomycin (aphA1), streptomycin (strAB), sulphonamides (sul2), tetracycline (tetA(B)) and trimethoprim (dfrA14), as well as mercuric ions (mer genes). In addition, putative virulence-associated genes coding for iron uptake (iutA/iucABCD, sitABCD, and a putative high-affinity Fe²⁺ uptake system) and for a toxin/antitoxin system (vagCD) were identified on the plasmid. All antibiotic and heavy metal resistance genes are located either on class 1 (Tn10-remnant, Tn4352B) and class 2 transposons (Tn2-remnant, Tn21, Tn402-remnant) or a class 1 integron, whereas almost all putative virulence genes are associated with IS elements (IS1, IS26), indicating that transposition and/or recombination events were responsible for acquisition of the accessory pRSB225 modules. Particular modules of plasmid pRSB225 are related to corresponding segments of different virulence plasmids harboured by pathogenic Escherichia coli strains. Moreover, pRSB225 modules were also detected in entero-aggregative-haemorrhagic E. coli (EAHEC) draft genome sequences suggesting that IncF plasmids related to pRSB225 mediated gene transfer into pathogenic E. coli derivatives.

Draft whole genome sequence of the cyanide-degrading bacterium Pseudomonas pseudoalcaligenes CECT5344

Pseudomonas pseudoalcaligenes CECT5344 is a Gram-negative bacterium able to tolerate cyanide and to use it as the sole nitrogen source. We report here the first draft of the whole genome sequence of a P. pseudoalcaligenes strain that assimilates cyanide. Three aspects are specially emphasized in this manuscript. First, some generalities of the genome are shown and discussed in the context of other Pseudomonadaceae genomes, including genome size, G + C content, core genome and singletons among other features. Second, the genome is analysed in the context of cyanide metabolism, describing genes probably involved in cyanide assimilation, like those encoding nitrilases, and genes related to cyanide resistance, like the cio genes encoding the cyanide insensitive oxidases. Finally, the presence of genes probably involved in other processes with a great biotechnological potential like production of bioplastics and biodegradation of pollutants also is discussed.

IncP-1β plasmids of Comamonas sp. and Delftia sp. strains isolated from a wastewater treatment plant mediate resistance to and decolorization of the triphenylmethane dye crystal violet

The application of toxic triphenylmethane dyes such as crystal violet (CV) in various industrial processes leads to large amounts of dye-contaminated sludges that need to be detoxified. Specific bacteria residing in wastewater treatment plants (WWTPs) are able to degrade triphenylmethane dyes. The objective of this work was to gain insights into the genetic background of bacterial strains capable of CV degradation. Three bacterial strains isolated from a municipal WWTP harboured IncP-1β plasmids mediating resistance to and decolorization of CV. These isolates were assigned to the genera Comamonas and Delftia. The CV-resistance plasmid pKV29 from Delftia sp. KV29 was completely sequenced. In addition, nucleotide sequences of the accessory regions involved in conferring CV resistance were determined for plasmids pKV11 and pKV36 from the other two isolates. Plasmid pKV29 contains typical IncP-1β backbone modules that are highly similar to those of previously sequenced IncP-1β plasmids that confer antibiotic resistance, degradative capabilities or mercury resistance. The accessory regions located between the conjugative transfer (tra) and mating pair formation modules (trb) of all three plasmids analysed share common modules and include a triphenylmethane reductase gene, tmr, that is responsible for decolorization of CV. Moreover, these accessory regions encode other enzymes that are dispensable for CV degradation and hence are involved in so-far-unknown metabolic pathways. Analysis of plasmid-mediated degradation of CV in Escherichia coli by ultra-high-performance liquid chromatography-electrospray ionization-quadrupole-time-of-flight MS revealed that leuco crystal violet was the first degradation product. Michler's ketone and 4-dimethylaminobenzaldehyde appeared as secondary degradation metabolites. Enzymes encoded in the E. coli chromosome seem to be responsible for cleavage of leuco crystal violet. Plasmid-mediated degradation of triphenylmethane dyes such as CV is an option for the biotechnological treatment of sludges contaminated with these dyes.

Insights into the completely annotated genome of Lactobacillus buchneri CD034, a strain isolated from stable grass silage

Lactobacillus buchneri belongs to the group of heterofermentative lactic acid bacteria and is a common member of the silage microbiome. Here we report the completely annotated genomic sequence of L. buchneri CD034, a strain isolated from stable grass silage. The whole genome of L. buchneri CD034 was sequenced on the Roche Genome Sequencer FLX platform. It was found to consist of four replicons, a circular chromosome, and three plasmids. The circular chromosome was predicted to encode 2319 proteins and contains a genomic island and two prophages which significantly differ in G+C-content from the remaining chromosome. It possesses all genes for enzymes of a complete phosphoketolase pathway, whereas two enzymes necessary for glycolysis are lacking. This confirms the classification of L. buchneri CD034 as an obligate heterofermentative lactic acid bacterium. A set of genes considered to be involved in the lactate degradation pathway and genes putatively involved in the breakdown of plant cell wall polymers were identified. Moreover, several genes encoding putative S-layer proteins and two CRISPR systems, belonging to the subclasses I-E and II-A, are located on the chromosome. The largest plasmid pCD034-3 was predicted to encode 57 genes, including a putative polysaccharide synthesis gene cluster, whereas the functions of the two smaller plasmids, pCD034-1 and pCD034-2, remain cryptic. Phylogenetic analysis based on sequence comparison of the conserved marker gene rpoA reveals that L. buchneri CD034 is more closely related to Lactobacillus hilgardii strains than to Lactobacillus brevis and Lactobacillus plantarum strains. Comparison of the L. buchneri CD034 core genome to other fully sequenced and closely related members of the genus Lactobacillus disclosed a high degree of conservation between L. buchneri CD034 and the recently sequenced L. buchneri strain NRRL B-30929 and a more distant relationship to L. buchneri ATCC 11577 and L. brevis ssp. gravesensis ATCC 27305, which cluster together with L. hilgardii type strain ATCC 8290. L. buchneri CD034 genome information will certainly provide the basis for further postgenome studies with the objective to optimize application of the strain in silage production.

The complete genome sequences of four new IncN plasmids from wastewater treatment plant effluent provide new insights into IncN plasmid diversity and evolution

The dissemination of antibiotic resistance genes among bacteria often occurs by means of plasmids. Wastewater treatment plants (WWTP) were previously recognized as hot spots for the horizontal transfer of genetic material. One of the plasmid groups that is often associated with drug resistance is the incompatibility group IncN. The aim of this study was to gain insights into the diversity and evolutionary history of IncN plasmids by determining and comparing the complete genome sequences of the four novel multi-drug resistance plasmids pRSB201, pRSB203, pRSB205 and pRSB206 that were exogenously isolated from the final effluent of a municipal WWTP. Their sizes range between 42,875 bp and 56,488 bp and they share a common set of backbone modules that encode plasmid replication initiation, conjugative transfer, and plasmid maintenance and control. All plasmids are transferable at high rates between Escherichia coli strains, but did not show a broad host range. Different genes conferring resistances to ampicillin, streptomycin, spectinomycin, sulfonamides, tetracycline and trimethoprim were identified in accessory modules inserted in these plasmids. Comparative analysis of the four WWTP IncN plasmids and IncN plasmids deposited in the NCBI database enabled the definition of a core set of backbone genes for this group. Moreover, this approach revealed a close phylogenetic relationship between the IncN plasmids isolated from environmental and clinical samples. Phylogenetic analysis also suggests the existence of host-specific IncN plasmid subgroups. In conclusion, IncN plasmids likely contribute to the dissemination of resistance determinants between environmental bacteria and clinical strains. This is of particular importance since multi-drug resistance IncN plasmids have been previously identified in members of the Enterobacteriaceae that cause severe infections in humans.