Elementary steps of syngas reactions on Mo2C(001): Adsorption thermochemistry and bond dissociation

The Impact of Oxygen Surface Coverage and Carbidic Carbon on the Activity and Selectivity of Two-Dimensional Molybdenum Carbide (2D-Mo2C) in Fischer-Tropsch Synthesis

Transformations of oxygenates (CO2, CO, H2O, etc.) via Mo2C-based catalysts are facilitated by the high oxophilicity of the material; however, this can lead to the formation of oxycarbides and complicate the identification of the (most) active catalyst state and active sites. In this context, the two-dimensional (2D) MXene molybdenum carbide Mo2CTx (Tx are passivating surface groups) contains only surface Mo sites and is therefore a highly suitable model catalyst for structure-activity studies. Here, we report that the catalytic activity of Mo2CTx in Fischer-Tropsch (FT) synthesis increases with a decreasing coverage of surface passivating groups (mostly O*). The in situ removal of Tx species and its consequence on CO conversion is highlighted by the observation of a very pronounced activation of Mo2CTx (pretreated in H2 at 400 °C) under FT conditions. This activation process is ascribed to the in situ reductive defunctionalization of Tx groups reaching a catalyst state that is close to 2D-Mo2C (i.e., a material containing no passivating surface groups). Under steady-state FT conditions, 2D-Mo2C yields higher hydrocarbons (C5+ alkanes) with 55% selectivity. Alkanes up to the kerosine range form, with value of α = 0.87, which is ca. twice higher than the α value reported for 3D-Mo2C catalysts. The steady-state productivity of 2D-Mo2C to C5+ hydrocarbons is ca. 2 orders of magnitude higher relative to a reference β-Μo2C catalyst that shows no in situ activation under identical FT conditions. The passivating Tx groups of Mo2CTx can be reductively defunctionalized also by using a higher H2 pretreatment temperature of 500 °C. Yet, this approach leads to a removal of carbidic carbon (as methane), resulting in a 2D-Mo2C1-x catalyst that converts CO to CH4 with 61% selectivity in preference to C5+ hydrocarbons that are formed with only 2% selectivity. Density functional theory (DFT) results attribute the observed selectivity of 2D-Mo2C to C5+ alkanes to a higher energy barrier for the hydrogenation of surface alkyl species relative to the energy barriers for C-C coupling. The removal of O* is the rate-determining step in the FT reaction over 2D-Mo2C, and O* is favorably removed in the form of CO2 relative to H2O, consistent with the observation of a high CO2 selectivity (ca. 50%). The absence of other carbon oxygenates is explained by the energetic favoring of the direct over the hydrogen-assisted dissociative adsorption of CO.

Dehydrogenation and dehydration of formic acid over orthorhombic molybdenum carbide

•

Formic acid (HCOOH) adsorption on β-Mo₂C is exothermic and favours a configuration parallel to the surface.

•

Once adsorbed, thermodynamics favour cleavage of the H—COOH bond to form CO.

•

CO bonds strongly to the surface, potentially poisoning the catalyst.

•

Therefore, kinetics favour dehydrogenation mechanism with CO₂ continuously formed.

The dehydrogenation and dehydration of formic acid is investigated on the β-Mo₂C (100) catalyst surface using time independent density functional theory. The energetics of the two mechanisms are calculated, and the thermochemistry and kinetics are discussed using the transition state theory. Subsequently, microkinetic modelling of the system is conducted, considering the batch reactor model. The potential energy landscape of the reaction shows a thermodynamically favourable cleavage of H—COOH to form CO; however, the kinetics show that the dehydrogenation mechanism is faster and CO₂ is continuously formed. The effect of HCOOH adsorption on the surface is also analysed, in a temperature-programmed desorption, with the conversion proceeding at under 350 K and desorption of CO₂ is observed with a selectivity of about 100 %, in line with the experimental reports.

A predicted new catalyst to replace noble metal Pd for CO oxidative coupling to DMO

The reaction mechanisms of CO oxidative coupling to dimethyl oxalate (DMO) on different β-Mo2C(001) based catalysts have been studied by the density functional theory (DFT) method.

True Nature of the Transition-Metal Carbide/Liquid Interface Determines Its Reactivity

Compound materials, such as transition-metal (TM) carbides, are anticipated to be effective electrocatalysts for the carbon dioxide reduction reaction (CO2RR) to useful chemicals. This expectation is nurtured by density functional theory (DFT) predictions of a break of key adsorption energy scaling relations that limit CO2RR at parent TMs. Here, we evaluate these prospects for hexagonal Mo2C in aqueous electrolytes in a multimethod experiment and theory approach. We find that surface oxide formation completely suppresses the CO2 activation. The oxides are stable down to potentials as low as -1.9 V versus the standard hydrogen electrode, and solely the hydrogen evolution reaction (HER) is found to be active. This generally points to the absolute imperative of recognizing the true interface establishing under operando conditions in computational screening of catalyst materials. When protected from ambient air and used in nonaqueous electrolyte, Mo2C indeed shows CO2RR activity.

Structural Evolution and Underlying Mechanism of Single-Atom Centers on Mo2C(100) Support during Oxygen Reduction Reaction

The single-metal atoms coordinating with the surface atoms of the support constitute the active centers of as-prepared single-atom catalysts (SACs). However, under hash electrochemical conditions, (1) supports' surfaces may experience structural change, which turn to be distinct from those at ambient conditions; (2) during catalysis, the dynamic responses of a single atom to the attack of reaction intermediates likely change the coordination environment of a single atom. These factors could alter the performance of SACs. Herein, we investigate these issues using Mo₂C(100)-supported single transition-metal (TM) atoms as model SACs toward catalyzing the oxygen reduction reaction (ORR). It is found that the Mo₂C(100) surface is oxidized under ORR turnover conditions, resulting in significantly weakened bonding between single TM atoms and the Mo₂C(100) surface (TM@Mo₂C(100)_O* term for SAC). While the intermediate in 2 e^- ORR does not change the local structures of the active centers in these SACs, the O* intermediate emerging in 4 e^- ORR can damage Rh@ and Cu@Mo₂C(100)_O*. Furthermore, on the basis of these findings, we propose Pt@Mo₂C(100)_O* as a qualified ORR catalyst, which exhibits extraordinary 4 e^- ORR activity with an overpotential of only 0.33 V, surpassing the state-of-the-art Pt(111), and thus being identified as a promising alternative to the commercial Pt/C catalyst.

Surface and Interface Engineering: Molybdenum Carbide-Based Nanomaterials for Electrochemical Energy Conversion

Molybdenum carbide (Mo_x C)-based nanomaterials have shown competitive performances for energy conversion applications based on their unique physicochemical properties. A large surface area and proper surface atomic configuration are essential to explore potentiality of Mo_x C in electrochemical applications. Although considerable efforts are made on the development of advanced Mo_x C-based catalysts for energy conversion with high efficiency and stability, some urgent issues, such as low electronic conductivity, low catalytic efficiency, and structural instability, have to be resolved in accordance with their application environments. Surface and interface engineering have shown bright prospects to construct highly efficient Mo_x C-based electrocatalysts for energy conversion including the hydrogen evolution reaction, oxygen evolution reaction, nitrogen reduction reaction, and carbon dioxide reduction reaction. In this Review, the recent progresses in terms of surface and interface engineering of Mo_x C-based electrocatalytic materials are summarized, including the increased number of active sites by decreasing the particle size or introducing porous or hierarchical structures and surface modification by introducing heteroatom(s), defects, carbon materials, and others electronic conductive species. Finally, the challenges and prospects for energy conversion on Mo_x C-based nanomaterials are discussed in terms of key performance parameters for the catalytic performance.

Understanding Selectivity in CO2 Hydrogenation to Methanol for MoP Nanoparticle Catalysts Using In Situ Techniques

Molybdenum phosphide (MoP) catalyzes the hydrogenation of CO, CO2, and their mixtures to methanol, and it is investigated as a high-activity catalyst that overcomes deactivation issues (e.g., formate poisoning) faced by conventional transition metal catalysts. MoP as a new catalyst for hydrogenating CO2 to methanol is particularly appealing for the use of CO2 as chemical feedstock. Herein, we use a colloidal synthesis technique that connects the presence of MoP to the formation of methanol from CO2, regardless of the support being used. By conducting a systematic support study, we see that zirconia (ZrO2) has the striking ability to shift the selectivity towards methanol by increasing the rate of methanol conversion by two orders of magnitude compared to other supports, at a CO2 conversion of 1.4% and methanol selectivity of 55.4%. In situ X-ray Absorption Spectroscopy (XAS) and in situ X-ray Diffraction (XRD) indicate that under reaction conditions the catalyst is pure MoP in a partially crystalline phase. Results from Diffuse Reflectance Infrared Fourier Transform Spectroscopy coupled with Temperature Programmed Surface Reaction (DRIFTS-TPSR) point towards a highly reactive monodentate formate intermediate stabilized by the strong interaction of MoP and ZrO2. This study definitively shows that the presence of a MoP phase leads to methanol formation from CO2, regardless of support and that the formate intermediate on MoP governs methanol formation rate.

A Review of Preparation Strategies for α-MoC1-x Catalysts

Transition metal carbides are attracting growing attention as robust and affordable alternative heterogeneous catalysts to platinum group metals, for a host of contemporary and established hydrogenation, dehydrogenation, and isomerisation reactions. In particular, the metastable α-MoC1-x phase has been shown to exhibit interesting catalytic properties for low temperature processes reliant on O-H and C-H bond activation. While demonstrating exciting catalytic properties, a significant challenge exists in the application of metastable carbides, namely the challenging procedure for their preparation. In this review we will briefly discuss the properties and catalytic applications of α-MoC1-x, followed by a more detailed discussion on available synthesis methods and important parameters that influence carbide properties. Techniques are contrasted with properties of phase, surface area, morphology and Mo:C being considered. Further, we briefly relate these observations to experimental and theoretical studies of α-MoC1-x in catalytic applications. Synthetic strategies discussed are, the original temperature programmed ammonolysis followed by carburisation, alternative oxycarbide or hydrogen bronze precursor phases, heat treatment of moybdate-amide compounds and other low temperature synthetic routes. The importance of carbon removal and catalyst passivation in relation to surface and bulk properties are also discussed. Novel techniques that by-pass the apparent bottle neck of ammonolysis are reported, however a clear understanding of intermediate phases is required to be able to fully apply these techniques. Pragmatically, the scaled application of these techniques requires the pre-pyrolysis wet chemistry to be simple and scalable. Further, there is a clear opportunity to correlate observed morphologies/phases and catalytic properties with findings from computational theoretical studies. Detailed characterisation throughout the synthetic process is essential and will undoubtedly provide fundamental insights that can be used for the controllable and scalable synthesis of metastable α-MoC1-x.

Exploiting two-dimensional morphology of molybdenum oxycarbide to enable efficient catalytic dry reforming of methane

The two-dimensional morphology of molybdenum oxycarbide (2D-Mo2COx) nanosheets dispersed on silica is found vital for imparting high stability and catalytic activity in the dry reforming of methane. Here we report that owing to the maximized metal utilization, the specific activity of 2D-Mo2COx/SiO2 exceeds that of other Mo2C catalysts by ca. 3 orders of magnitude. 2D-Mo2COx is activated by CO2, yielding a surface oxygen coverage that is optimal for its catalytic performance and a Mo oxidation state of ca. +4. According to ab initio calculations, the DRM proceeds on Mo sites of the oxycarbide nanosheet with an oxygen coverage of 0.67 monolayer. Methane activation is the rate-limiting step, while the activation of CO2 and the C-O coupling to form CO are low energy steps. The deactivation of 2D-Mo2COx/SiO2 under DRM conditions can be avoided by tuning the contact time, thereby preventing unfavourable oxygen surface coverages.

Acetic acid hydrodeoxygenation on molybdenum carbide catalysts

Kinetics and site requirements of acetic acid hydrodeoxygenation on molybdenum carbide – a stable and selective catalyst under atmospheric hydrogen pressure.

Effect of Platinum, Gold, and Potassium Additives on the Surface Chemistry of CdI2-Antitype Mo2C

Transition metal carbides are versatile materials for diverse industrial applications including catalysis, where their relatively low cost is very attractive. In this work, we present a rather extensive density functional theory study on the energetics of adsorption of a selection of atomic and molecular species on two Mo terminations of the CdI₂ antitype phase of Mo₂C. Moreover, the coadsorption of CO in the presence of preadsorbed metal atoms and its dissociative adsorption in the absence and presence of preadsorbed Pt and K were investigated. By using CO as a probe to understand the structural/electronic effects of the preadsorption of the metal atoms on the Mo₂C(001) surface, we showed that K further enhances CO adsorption/activation on the surface, in contrast to the precious metals considered. Moreover, it was observed that the presence of both Pt and K stabilizes the transition state for the C-O bond dissociation, lowering the activation barrier for the dissociation of the C-O bond by about 0.3 and 0.4 eV, respectively.

Potassium-Promoted Molybdenum Carbide as a Highly Active and Selective Catalyst for CO2 Conversion to CO

The high concentration of CO₂ bound in seawater represents a significant opportunity to extract and use this CO₂ as a C₁ feedstock for synthetic fuels. Using an existing process, CO₂ and H₂ can be concurrently extracted from seawater and then catalytically reacted to produce synthetic fuel. Hydrogenating CO₂ directly into liquid hydrocarbons is exceptionally difficult, but by first identifying a catalyst for selective CO production through the reverse water-gas shift (RWGS) reaction, CO can then be hydrogenated to fuel through Fischer-Tropsch (FT) synthesis. Results of this study demonstrate that potassium-promoted molybdenum carbide supported on γ-Al₂ O₃ (K-Mo₂ C/γ-Al₂ O₃ ) is a low-cost, stable, and highly selective catalyst for RWGS over a wide range of conversions. These findings are supported by X-ray diffraction, scanning electron microscopy with energy-dispersive X-ray spectroscopy, X-ray photoelectron spectroscopy, and density functional theory calculations.

Oxidation of the hexagonal Mo2C(101) surface by H2O dissociative adsorption

Oxidation of the hexagonal Mo₂C(101) surface by H₂O dissociative adsorption was investigated using periodic density functional theory.

Catalytic deoxygenation on transition metal carbide catalysts

We highlight the evolution and tunability of catalytic function of transition metal carbides under oxidative and reductive environments for selective deoxygenation reactions.

The conversion of CO2 to methanol on orthorhombic β-Mo2C and Cu/β-Mo2C catalysts: mechanism for admetal induced change in the selectivity and activity

Cu clusters supported on β-Mo₂C improve the selectivity towards methanol decreasing the amount of methane.

Evidence of methane adsorption over Mo2C involving single C–H bond dissociation instead of facile carbon exchange

Methane adsorption on Mo₂C involves a single C–H bond dissociation instead of facile carbon exchange as has been previously reported.

Design Principles for Metal Oxide Redox Materials for Solar-Driven Isothermal Fuel Production

The performance of metal oxides as redox materials is limited by their oxygen conductivity and thermochemical stability. Predicting these properties from the electronic structure can support the screening of advanced metal oxides and accelerate their development for clean energy applications. Specifically, reducible metal oxide catalysts and potential redox materials for the solar-thermochemical splitting of CO2 and H2O via an isothermal redox cycle are examined. A volcano-type correlation is developed from available experimental data and density functional theory. It is found that the energy of the oxygen-vacancy formation at the most stable surfaces of TiO2, Ti2O3, Cu2O, ZnO, ZrO2, MoO3, Ag2O, CeO2, yttria-stabilized zirconia, and three perovskites scales with the Gibbs free energy of formation of the bulk oxides. Analogously, the experimental oxygen self-diffusion constants correlate with the transition-state energy of oxygen conduction. A simple descriptor is derived for rapid screening of oxygen-diffusion trends across a large set of metal oxide compositions. These general trends are rationalized with the electronic charge localized at the lattice oxygen and can be utilized to predict the surface activity, the free energy of complex bulk metal oxides, and their oxygen conductivity.

Coverage dependent adsorption and co-adsorption of CO and H2 on the CdI2-antitype metallic Mo2C(001) surface

The adsorption and co-adsorption of CO and H₂ at different coverage on the CdI₂-antitype metallic Mo₂C(001) surface termination have been systematically computed at the level of periodic density functional theory.

Platinum–carbide interactions: core–shells for catalytic use

A selection of carbides were modelled using DFT to assess their suitability as core–shell components for the oxygen reduction reaction.