Pt catalysts modified with Bi: Enhancement of the catalytic activity for alcohol oxidation in alkaline media

Enhanced Glycerol Oxidation Toward Dihydroxyacetone Over Gold/Palladium Binary Nanocatalysts by Structure Control

Gold/palladium binary catalysts have been widely used to the selective oxidation of glycerol to produce value-added chemicals. However, the essential effect of the structure of Au/Pd binary catalysts on the catalytic performance has not been elucidated yet. In this work, Au, Pd, AuPd alloy, Au@Pd core-shell, and Au-Pd Janus nanoparticle catalysts prepared by sol-immobilization and photochemical deposition methods were employed to the selective oxidation of glycerol toward dihydroxyacetone (DHA). The results showed that the activation of glycerol and oxygen molecule was significantly promoted with the appropriate interaction between Au and Pd atoms. That was, the turnover frequency of glycerol and DHA generation rate over the alloyed AuPd nanoparticles were remarkably higher than those of Au@Pd core-shell and Au-Pd Janus nanoparticle catalysts. It was due to the synergistic effect of Pd and Au atoms remarkably promoted the electron transfer from Pd to Au, resulting in increasing the activity of the exposed Au sites, and moderately inhibiting the activity of the exposed Pd sites, which benefited to generate DHA rapidly. After optimizing, up to 61 % yield of DHA was achieved at 87 % glycerol conversion over the alloyed AuPd catalyst.

Orbital Occupancy Modulation to Optimize Intermediate Absorption for Efficient Electrocatalysts in Water Electrolysis and Zinc-Ethanol-Air Battery

Spin engineering is a promising way to modulate the interaction between the metal d-orbital and the intermediates and thus enhance the catalytic kinetics. Herein, an innovative strategy is reported to modulate the spin state of Co by regulating its coordinating environment. o-c-CoSe2 -Ni is prepared as pre-catalyst, then in situ electrochemical impedance spectroscopy (EIS) and in situ Raman spectroscopy are employed to prove phase transition, and CoOOH/Co3 O4 is formed on the surface as active sites. In hybrid water electrolysis, the voltage has a negative shift, and in zinc-ethanol-air battery, the charging voltage is lowered and the cycling stability is greatly increased. Coordinated atom substitution and crystalline symmetry change are combined to regulate the absorption ability of reaction intermediates with balanced optimal adsorption. Coordinated atom substitution weakens the adsorption while the crystalline symmetry change strengthens the adsorption. Importantly, the tetrahedral sites are introduced by Ni doping which enables the co-existence of four-coordinated sites and six-coordination sites in o-c-CoSe2 -Ni. The dz2 + dx2 -y2 orbital occupancy decreases after the atomic substitution, while increases after replacing the CoSe6 -Oh field with CoSe6 -Oh /CoSe4 -Td . This work explores a new direction for the preparation of efficient catalysts for water electrolysis and innovative zinc-ethanol-air battery.

In-situ Bi-modified Pt towards glycerol and formic acid electro-oxidation: Effects of catalyst structure and surface microenvironment on activity and selectivity

The performances of glycerol electro-oxidation reaction (GOR) and formic acid electro-oxidation reaction (FAOR) catalyzed by Pt catalyst were dramatically improved by adding Bi3+ into the reaction solution. The dynamic structure and microenvironment of in-situ Bi-modified Pt and their impact on the catalytic performances were revealed. A strong correlation was established between the Bi coverage of Pt-based catalysts and their resistance to CO poisoning and performance in GOR and FAOR. When Bi3+ increased to a certain amount, a Bi-shell containing hydroxides was formed on Pt surfaces except the formation of Pt-Bi ensemble. On Pt catalyst covered with 43.9 % Bi, the peak mass-specific activities of GOR and FAOR in forward scans were 4.2 and 34.7 times that of Pt/NCNTs, respectively. The peak electrochemical active surface area (ECSA)-specific activity of FAOR in forward scan for Pt with 52.6 % Bi coverage was 80.6 times that of Pt/NCNTs. The dehydrogenation process in FAOR and the 4-electron pathway in GOR were improved for Bi-modified Pt. The experimental results and DFT calculations indicated that the positively charged Bi and structure of Pt-Bi ensemble improved the adsorption and interaction of negatively charged intermediates, and the enhanced hydroxides facilitated the oxidation and removal of toxic intermediates, such as CO.

Nano-Magnetic NiFe2O4 and Its Photocatalytic Oxidation of Vanillyl Alcohol-Synthesis, Characterization, and Application in the Valorization of Lignin

Here, we report on a phyto-mediated bimetallic (NiFe₂O₄) preparation using a Boswellia carterii extract, which was characterized by XRD, FT-IR, TGA, electron microscopy, magnetic spectroscopy, and Mössbauer spectroscopy measurements. The prepared nano-catalysts were tested for oxidation of lignin monomer molecules-vanillyl alcohol and cinnamyl alcohol. In comparison with previously reported methods, the nano NiFe₂O₄ catalysts showed high photocatalytic activity and selectivity, under visible light irradiation with a nitroxy radical initiator (2,2,6,6-tetramethylpiperidinyloxy or 2,2,6,6-tetramethylpiperidine 1-oxyl; TEMPO) at room temperature and aerobic conditions. The multifold advantages of the catalyst both in terms of reduced catalyst loading and ambient temperature conditions were manifested by higher conversion of the starting material.

Au Nanoparticles Modified with Pt, Ru and SnO2 as Electrocatalysts for Ethanol Oxidation Reaction in Acids

The anodic reaction in direct ethanol fuel cells (DEFCs), ethanol oxidation reaction (EOR) faces challenges, such as incomplete electrooxidation of ethanol and high cost of the most efficient electrocatalyst, Pt in acidic media at low temperature. In this study, core-shell electrocatalysts with an Au core and Pt-based shell (Au@Pt) are developed. The Au core size and Pt shell thickness play an important role in the EOR activity. The Au size of 2.8 nm and one layer of Pt provide the most optimized performance, having 6 times higher peak current density in contrast to commercial Pt/C. SnO₂ as a support also enhances the EOR activity of Au@Pt by 1.73 times. Further modifying the Pt shell with Ru atoms achieve the highest EOR current density that is 15 and 2.5 times of Pt/C and Au@Pt. Our results suggest the importance of surface modification in rational design of advanced electrocatalysts.

Remarkable promoting effects of BiOCl on the room-temperature selective oxidation of benzyl alcohol over supported Pt catalysts

BiOCl, in addition to traditional Bi metal, could remarkably promote the catalytic performance of Pt/MO_x in the selective oxidation of benzyl alcohol.