Cobalt-iron (oxides) water oxidation catalysts: Tracking catalyst redox states and reaction dynamic mechanism

One-Step Preparation of Trinary Co(III)/Co(II)/Co(0) Bifunctional Catalysts with Controllable Co Valence Distribution via Solution Combustion Synthesis and Its Application to Oxygen Reduction and Evolution in Zinc-Air Batteries

Regulating the electronic structure and chemical valence of the active site for electrocatalysis is highly crucial and challenging. In this work, a cost-effective and facile strategy for regulating the cobalt valence distribution through one-step solution combustion synthesis via cobalt nitrate (oxidizer) and glycine (fuel) was developed to prepare a bifunctional Co(III)/Co(II)/Co(0) catalyst for oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) in a zinc-air battery. Experimental findings show that when increasing the fuel/oxidizer ratio φ, the composition of the synthesized catalyst gradually changes from binary Co(III)/Co(II) to trinary Co(III)/Co(II)/Co(0), and the average Co valence keeps decreasing. As the content of Co(II)/Co(0) increases, the ORR performance of the sample gradually improves. The sample synthesized at φ = 1.2 shows the best bifunctional catalytic activity and was employed to assemble a rechargeable zinc-air battery. Overall, compared with the published data, the proposed catalyst has a comparable ORR/OER activity and catalyst stability, with an excellent battery life, efficiency, and stability (up to 160 h). This work provides a promising pathway for designing the valence state distribution of non-noble cobalt-based catalysts, which can be easily prepared on a large scale with low cost and used in various technologies involved in ORR and OER reactions.

A critical mini-review on doping and heterojunction formation in ZnO-based catalysts

This mini-review on doping and heterojunctions for catalysis applications provides a comprehensive overview of key aspects. Doping, when carried out adequately with a uniform distribution, creates a new energy level that significantly enhances charge transfer and light absorption. This new level alters the material's morphology and enhances intrinsic defects. For instance, ZnO, despite its exceptional band edge concerning oxygen reduction and water oxidation redox potentials, faces the issue of electron-hole recombination. However, forming a heterojunction can effectively aid charge transfer and prolong electron-hole relaxation without recombination. This is where the role of doping and heterojunctions becomes crucial. Additionally, incorporating noble metals with S- and Z-scheme heterojunctions offers a promising mechanism for charge transfer and visible light harvesting, further amplifying the catalytic properties.

Charge transfer in TiO2-based photocatalysis: fundamental mechanisms to material strategies

Semiconductor-based photocatalysis has attracted significant interest due to its capacity to directly exploit solar energy and generate solar fuels, including water splitting, CO2 reduction, pollutant degradation, and bacterial inactivation. However, achieving the maximum efficiency in photocatalytic processes remains a challenge owing to the speedy recombination of electron-hole pairs and the limited use of light. Therefore, significant endeavours have been devoted to addressing these issues. Specifically, well-designed heterojunction photocatalysts have been demonstrated to exhibit enhanced photocatalytic activity through the physical distancing of electron-hole pairs generated during the photocatalytic process. In this review, we provide a systematic discussion ranging from fundamental mechanisms to material strategies, focusing on TiO2-based heterojunction photocatalysts. Current efforts are focused on developing heterojunction photocatalysts based on TiO2 for a variety of photocatalytic applications, and these projects are explained and assessed. Finally, we offer a concise summary of the main insights and challenges in the utilization of TiO2-based heterojunction photocatalysts for photocatalysis. We expect that this review will serve as a valuable resource to improve the efficiency of TiO2-based heterojunctions for energy generation and environmental remediation.

Plasma-assisted assembly of Co3O4/TiO2-NRs for photoelectrocatalytic degradation of bisphenol A in solution and muddy systems

Herein, Co3O4/TiO2-NRs electrodes with excellent photoresponse have been prepared via the plasma-assisted modification of Co3O4 on TiO2. With the combination of Co3O4 and TiO2, the composite electrode exhibited a red-shift phenomenon and the absorption of UV and visible light were enhanced to improve the light utilization efficiency. The Mott-Schottky diagram showed that a P-N heterojunction was successfully formed between Co3O4 and TiO2 on the electrode, which inhibited the recombination of electrons and holes, and had a high photocurrent density. In our photoelectrocatalysis (PEC) degradation experiments, the degradation rates of bisphenol A (BPA) by Co3O4/TiO2-NRs electrode in Na2SO4 and simulated seawater system reached 69.44 and 100%, respectively. The important role of ·O2-, ·OH, h+, and active chlorine (Cl·, HClO/ClO-, and Cl2) on the Co3O4/TiO2-NRs electrode during the degradation of BPA in simulated seawater was revealed. In addition, PEC combined with electrokinetic (EK) studies with the Co3O4/TiO2-NRs electrode were used for the degradation of BPA in muddy water, initially expanding the application scope of the PEC performance of the Co3O4/TiO2-NRs electrode for pollutants degradation, and had great potential for the subsequent treatment of muddy water pollutants.

Elucidating the Mechanism of Fe Incorporation in In Situ Synthesized Co-Fe Oxygen-Evolving Nanocatalysts

Ni- and Co-based catalysts with added Fe demonstrate promising activity in the oxygen evolution reaction (OER) during alkaline water electrolysis, with the presence of Fe in a certain quantity being crucial for their enhanced performance. The mode of incorporation, local placement, and structure of Fe ions in the host catalyst, as well as their direct/indirect contribution to enhancing the OER activity, remain under active investigation. Herein, the mechanism of Fe incorporation into a Co-based host was investigated using an in situ synthesized Co-Fe catalyst in an alkaline electrolyte containing Co2+ and Fe3+. Fe was found to be uniformly incorporated, which occurs solely after the anodic deposition of the Co host structure and results in exceptional OER activity with an overpotential of 319 mV at 10 mA cm-2 and a Tafel slope of 28.3 mV dec-1. Studies on the lattice structure, chemical oxidation states, and mass changes indicated that Fe is incorporated into the Co host structure by replacing the Co3+ sites with Fe3+ from the electrolyte. Operando Raman measurements revealed that the presence of doped Fe in the Co host structure reduces the transition potential of the in situ Co-Fe catalyst to the OER-active phase CoO2. The findings of our facile synthesis of highly active and stable Co-Fe particle catalysts provide a comprehensive understanding of the role of Fe in Co-based electrocatalysts, covering aspects that include the incorporation mode, local structure, placement, and mechanistic role in enhancing the OER activity.

MOF-derived CeO2/Co3O4-Fe2O3@CC nanocomposites as highly sensitive electrochemical sensor for bisphenol a detection

A novel CeO₂/Co₃O₄-Fe₂O₃@CC electrode derived from CeCo-MOFs was developed for detecting the endocrine disruptor bisphenol A (BPA). Firstly, bimetallic CeCo-MOFs were prepared by hydrothermal method, and obtained material was calcined to form metal oxides after doping Fe element. The results suggested that hydrophilic carbon cloth (CC) modified with CeO₂/Co₃O₄-Fe₂O₃ had good conductivity and high electrocatalytic activity. By the analyses of cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS), the introduction of Fe increased the current response and conductivity of the sensor, greatly increasing the effective active area of the electrode. Significantly, electrochemical test proves that the prepared CeO₂/Co₃O₄-Fe₂O₃@CC had excellent electrochemical response to BPA with a low detection limit of 8.7 nM, an excellent sensitivity of 20.489 μA/μM·cm², a linear range of 0.5-30 μM, and strong selectivity. In addition, the CeO₂/Co₃O₄-Fe₂O₃@CC sensor had a high recovery rate for the detection of BPA in real tap water, lake water, soil eluent, seawater, and PET bottle samples, which showed its potential in practical applications. To sum up, the CeO₂/Co₃O₄-Fe₂O₃@CC sensor prepared in this work had excellent sensing performance, good stability and selectivity for BPA, which can be well used for the detection of BPA.

Operando Identification of the Reversible Skin Layer on Co3O4 as a Three-Dimensional Reaction Zone for Oxygen Evolution

Co oxides and oxyhydroxides have been studied extensively in the past as promising electrocatalysts for the oxygen evolution reaction (OER) in neutral to alkaline media. Earlier studies showed the formation of an ultrathin CoO_x(OH)_y skin layer on Co₃O₄ at potentials above 1.15 V vs reversible hydrogen electrode (RHE), but the precise influence of this skin layer on the OER reactivity is still under debate. We present here a systematic study of epitaxial spinel-type Co₃O₄ films with defined (111) orientation, prepared on different substrates by electrodeposition or physical vapor deposition. The OER overpotential of these samples may vary up to 120 mV, corresponding to two orders of magnitude differences in current density, which cannot be accounted for by differences in the electrochemically active surface area. We demonstrate by a careful analysis of operando surface X-ray diffraction measurements that these differences are clearly correlated with the average thickness of the skin layer. The OER reactivity increases with the amount of formed skin layer, indicating that the entire three-dimensional skin layer is an OER-active interphase. Furthermore, a scaling relationship between the reaction centers in the skin layer and the OER activity is established. It suggests that two lattice sites are involved in the OER mechanism.

Bismuth-Graphene Nanohybrids: Synthesis, Reaction Mechanisms, and Photocatalytic Applications—A Review

Photocatalysis is a classical solution to energy conversion and environmental pollution control problems. In photocatalysis, the development and exploration of new visible light catalysts and their synthesis and modification strategies are crucial. It is also essential to understand the mechanism of these reactions in the various reaction media. Recently, bismuth and graphene’s unique geometrical and electronic properties have attracted considerable attention in photocatalysis. This review summarizes bismuth-graphene nanohybrids’ synthetic processes with various design considerations, fundamental mechanisms of action, heterogeneous photocatalysis, benefits, and challenges. Some key applications in energy conversion and environmental pollution control are discussed, such as CO2 reduction, water splitting, pollutant degradation, disinfection, and organic transformations. The detailed perspective of bismuth-graphene nanohybrids’ applications in various research fields presented herein should be of equal interest to academic and industrial scientists.

Highly Efficient Alkaline Water Splitting with Ru-Doped Co-V Layered Double Hydroxide Nanosheets as a Bifunctional Electrocatalyst

Active electrocatalysts for the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) are decisive for achieving efficient energy conversion from electricity to hydrogen fuel through water electrolysis. In this study, tremella-like Ru-doped Co-V layered double hydroxide nanosheets on Ni Foam (Ru-CoV-LDH@NF) was fabricated by a one-pot solvothermal reaction. As-prepared Ru-CoV-LDH@NF, with a nominal Ru loading of around 51.6 μg cm^-2 exhibits excellent bifunctional catalytic activity towards HER and OER in alkaline media. To accomplish a current density of 10 mA cm^-2 , it demands 32 mV and 230 mV overpotentials for HER and OER, respectively. The alkali electrolyzer utilizing Ru-CoV-LDH/NF as bifunctional electrocatalyst affords 10 mA cm^-2 electrolytic current density at an extremely low cell voltage of 1.50 V, showing excellent performance compared to a Pt/C-RuO₂ -based electrolyzer and many other bifunctional electrocatalyst-based ones. The incorporation of Ru changes the morphology of the resultant nanosheets to offer high electrochemical surface areas for electrocatalysis; at the same time, it significantly boosts the intrinsic HER/OER electrocatalytic activity. For HER, the energy barrier of the Volmer step is efficiently reduced upon Ru doping, whereas the Ru dopants optimize the absorption strength of *O intermediates to facilitate the OER process. This work offers a feasible means to optimize the Co-based hydroxide materials for improved electrocatalysis in overall water splitting.

Non-precious-metal catalysts for alkaline water electrolysis: operando characterizations, theoretical calculations, and recent advances

Advances of non-precious-metal catalysts for alkaline water electrolysis are reviewed, highlighting operando techniques and theoretical calculations in their development.