Computational prediction and experimental evaluation of nitrate reduction to ammonia on rhodium

Exploring Nitrogen Reduction Reaction Mechanisms with Graphyne-Confined Single-Atom Catalysts: A Computational Study Incorporating Electrode Potential and pH

This study reconciles discrepancies between practical electrochemical conditions and theoretical density functional theory (DFT) frameworks, evaluating three graphyne-confined single-atom catalysts (Mo-TEB, Mo@GY, and Mo@GDY). Using both constant charge models in vacuum and constant potential models with continuum implicit solvation, we closely mimic real-world electrochemical environments. Our findings highlight the crucial role of explicitly incorporating electrode potential and pH in the constant potential model, providing enhanced insights into the nitrogen reduction reaction (NRR) mechanisms. Notably, the superior NRR performance of Mo-TEB is attributed to the d-band center's proximity to the Fermi level and enhanced magnetic moments at the atomic center. This research advances our understanding of graphyne-confined single-atom catalysts as effective NRR platforms and underscores the significance of the constant potential model for accurate DFT studies of electrochemical reactions.

Nanocluster-agminated amorphous cobalt nanofilms for highly selective electroreduction of nitrate to ammonia

Developing highly-efficient electrocatalysts for the nitrate reduction reaction (NITRR) is a persistent challenge. Here, we present the successful synthesis of 14 amorphous/low crystallinity metal nanofilms on three-dimensional carbon fibers (M-NFs/CP), including Al, Ti, Mn, Fe, Co, Ni, Cu, Zn, Ag, In, Sn, Pb, Au, or Bi, using rapid thermal evaporation. Among these samples, our study identifies the amorphous Co nanofilm with fine agglomerated Co clusters as the optimal electrocatalyst for NITRR in a neutral medium. The resulting Co-NFs/CP exhibits a remarkable Faradaic efficiency (FENH3) of 91.15 % at - 0.9 V vs RHE, surpassing commercial Co foil (39 %) and Co powder (20 %), despite sharing the same metal composition. Furthermore, during the electrochemical NITRR, the key intermediates on the surface of the Co-NFs/CP catalyst were detected by in situ Fourier-transform infrared (FTIR) spectroscopy, and the possible reaction ways were probed by Density functional theory (DFT) calculations. Theoretical calculations illustrate that the abundant low-coordinate Co atoms of Co-NFs/CP could enhances the adsorption of *NO3 intermediates compared to crystalline Co. Additionally, the amorphous Co structure lowers the energy barrier for the rate-determining step (*NH2→*NH3). This work opens a new avenue for the controllable synthesis of amorphous/low crystallinity metal nano-catalysts for various electrocatalysis reaction applications.

Progress Made in Non-Metallic-Doped Materials for Electrocatalytic Reduction in Ammonia Production

The electrocatalytic production of ammonia has garnered considerable interest as a potentially sustainable technology for ammonia synthesis. Recently, non-metallic-doped materials have emerged as promising electrochemical catalysts for this purpose. This paper presents a comprehensive review of the latest research on non-metallic-doped materials for electrocatalytic ammonia production. Researchers have engineered a variety of materials, doped with non-metals such as nitrogen (N), boron (B), phosphorus (P), and sulfur (S), into different forms and structures to enhance their electrocatalytic activity and selectivity. A comparison among different non-metallic dopants reveals their distinct effects on the electrocatalytic performance for ammonia production. For instance, N-doping has shown enhanced activity owing to the introduction of nitrogen vacancies (NVs) and improved charge transfer kinetics. B-doping has demonstrated improved selectivity and stability, which is attributed to the formation of active sites and the suppression of competing reactions. P-doping has exhibited increased ammonia generation rates and Faradaic efficiencies, likely due to the modification of the electronic structure and surface properties. S-doping has shown potential for enhancing electrocatalytic performance, although further investigations are needed to elucidate the underlying mechanisms. These comparisons provide valuable insights for researchers to conduct in-depth studies focusing on specific non-metallic dopants, exploring their unique properties, and optimizing their performance for electrocatalytic ammonia production. However, we consider it a priority to provide insight into the recent progress made in non-metal-doped materials and their potential for enabling long-term and efficient electrochemical ammonia production. Additionally, this paper discusses the synthetic procedures used to produce non-metal-doped materials and highlights the advantages and disadvantages of each method. It also provides an in-depth analysis of the electrochemical performance of these materials, including their Faradaic efficiencies, ammonia yield rate, and selectivity. It examines the challenges and prospects of developing non-metallic-doped materials for electrocatalytic ammonia production and suggests future research directions.

Advances in iron-based electrocatalysts for nitrate reduction

Excessive nitrate has been a critical issue in the water environment, originating from the burning of fossil fuels, inefficient use of nitrogen fertilizers, and discharge of domestic and industrial wastewater. Among the effective treatments for nitrate reduction, electrocatalysis has become an advanced technique because it uses electrons as green reducing agents and can achieve high selectivity through cathode potential control. The effectiveness of electrocatalytic nitrate reduction (NO₃RR) mainly lies in the electrocatalyst. Iron-based catalysts have the advantages of high activity and low cost, which are well-used in the field of electrocatalytic nitrates. A comprehensive overview of the electrocatalytic mechanism and the iron-based materials for NO₃RR are given in terms of monometallic iron-based materials as well as bimetallic and oxide iron-based materials. A detailed introduction to NO₃RR on zero valent iron, single-atom iron catalysts, and Cu/Fe-based bimetallic electrocatalysts are provided, as they are essential for the improvement of NO₃RR performance. Finally, the advantages of iron-based materials for NO₃RR and the problems in current applications are summarized, and the development prospects of efficient iron-based catalysts are proposed.

Interfacial Reduction Nucleation of Noble Metal Nanodots on Redox-Active Metal-Organic Frameworks for High-Efficiency Electrocatalytic Conversion of Nitrate to Ammonia

Electrochemically converting nitrate to ammonia is a promising route to realize artificial nitrogen recycling. However, developing highly efficient electrocatalysts is an ongoing challenge. Herein, we report the construction of stable and redox-active zirconium metal-organic frameworks (Zr-MOFs) based on Zr₆ nanoclusters and redox-reversible tetrathiafulvalene (TTF) derivatives as inorganic nodes and organic linkers, respectively. The redox-active Zr-MOF can facilitate the in situ reduction of noble metal precursors free of external reductants and realize the uniform nucleation of noble metal nanodots (NDs) on Zr-MOF, achieving the preparation of M-NDs/Zr-MOF (M = Pd, Ag, or Au). The highly porous Zr-MOF with good conductivity can facilitate the mass transfer process. Among the M-NDs/Zr-MOF catalysts, Pd-NDs/Zr-MOF exhibits the highest electrocatalytic activity, delivering a NH₃ yield of 287.31 mmol·h^-1·g^-1_cat. and a Faradaic efficiency of 58.1%. The proposed interfacial reduction nucleation strategy for anchoring M NDs on Zr-MOFs can be applied to other challenging energy conversion reactions.

Evaluation of Electrocatalytic Activity of Noble Metal Catalysts Toward Nitrogen Reduction Reaction in Aqueous Solutions under Ambient Conditions

Electrochemical nitrogen reduction reaction (NRR) is intensively investigated by researchers for its potential to be the next-generation technology to produce ammonia. Many attempts have been made to explore the possibility of electrochemical ammonia production catalyzed by noble metals. However, the produced ammonia in most reported cases is in ppm level or even lower, which is susceptible to potential contaminants in experiments, leading to fluctuating or even contradictory results. Herein, a rigorous procedure was adopted to systematically evaluated the performance of commercial noble metal nanocatalysts toward NRR. No discernible amount of ammonia was detected in either acidic or alkaline solutions. Further, nitrogen-containing contaminants in catalysts that might cause false positive results were detected and characterized. An effective way to remove pre-existing pollutants by consecutive cyclic voltammetry scan was proposed, helping to obtain reliable and reproducible results.

Lithium-mediated electrochemical nitrogen reduction: Mechanistic insights to enhance performance

Green synthesis of ammonia by electrochemical nitrogen reduction reaction (NRR) shows great potential as an alternative to the Haber-Bosch process but is hampered by sluggish production rate and low Faradaic efficiency. Recently, lithium-mediated electrochemical NRR has received renewed attention due to its reproducibility. However, further improvement of the system is restricted by limited recognition of its mechanism. Herein, we demonstrate that lithium-mediated NRR began with electrochemical deposition of lithium, followed by two chemical processes of dinitrogen splitting and protonation to ammonia. Furthermore, we quantified the extent to which the freshly deposited active lithium lost its activity toward NRR due to a parasitic reaction between lithium and electrolyte. A high ammonia yield of 0.410 ± 0.038 μg s^-1 cm^-2 geo and Faradaic efficiency of 39.5 ± 1.7% were achieved at 20 mA cm^-2 geo and 10 mA cm^-2 geo, respectively, which can be attributed to fresher lithium obtained at high current density.

Electrocatalytic nitrate reduction on rhodium sulfide compared to Pt and Rh in the presence of chloride

Chloride poisoning is a serious problem for the electrocatalytic reduction of aqueous nitrate (NO3−) and improved electrocatalysts are needed.