TS-1 zeolite with homogeneous distribution of Ti atoms in the framework: synthesis, crystallization mechanism and its catalytic performance

Preparation of Multistage Pore TS-1 with Enhanced Photocatalytic Activity, Including Process Studies and Artificial Neural Network Modeling for Synergy Assessment

Antibiotic residues have been found in several aquatic ecosystems as a result of the widespread use of antibiotics in recent years, which poses a major risk to both human health and the environment. At present, photocatalytic degradation is the most effective and environmentally friendly method. Titanium silicon molecular sieve (TS-1) has been widely used as an industrial catalyst, but its photocatalytic application in wastewater treatment is limited due to its small pores and few active sites. In this paper, we report a method for preparing multistage porous TS-1 with a high specific surface area by alkali treatment. In the photocatalytic removal of CIP (ciprofloxacin) antibiotic wastewater experiments, the alkali-treated catalyst showed better performance in terms of interfacial charge transfer efficiency, which was 2.3 times higher than that of TS-1 synthesized by the conventional method, and it was found to maintain better catalytic performance in the actual water source. In addition, this research studied the effects of solution pH, contaminant concentration, and catalyst dosage on CIP degradation, while liquid chromatography-mass spectrometry (LC-MS) was used to identify intermediates in the degradation process and infer possible degradation pathways and the toxicity of CIP, and its degradation product was also analyzed using ECOSAR 2.2 software, and most of the intermediates were found to be nontoxic and nonharmful. Finally, a 3:5:1 artificial neural network model was established based on the experiments, and the relative importance of the influence of experimental conditions on the degradation rate was determined. The above results confirmed the feasibility and applicability of photocatalytic treatment of wastewater containing antibiotics using visible light excitation alkali post-treatment TS-1, which provided technical support and a theoretical basis for the photocatalytic treatment of wastewater containing antibiotics.

When covalent organic frameworks meet zeolites: Enhancing rhodamine B removal through the synergy in the emerging organic-inorganic nanoadsorbents

The development of new porous materials has attracted intense attention as adsorbents for removing pollutants from wastewater. However, pure inorganic and organic porous materials confront various problems in purifying the wastewater. In this work, we integrated a covalent organic framework (TpPa-1) with an inorganic zeolite (TS-1) for the first time via a solvothermal method to fabricate new-type nanoadsorbents. The covalent organic framework/zeolite (TpPa-1/TS-1) nanoadsorbents combined the merits of the zeolite and COF components and possessed efficient adsorptive removal of organic contaminants from solution. Structural morphology and chemical composition characterization by powder X-ray diffraction, scanning electron microscopy, Fourier-transform infrared spectroscopy, X-ray photoelectron spectroscopy, transmission electron microscopy and thermogravimetric analysis demonstrated the successful preparation of TpPa-1/TS-1 composite nanoadsorbents. The resultant composite adsorbent TpPa-1/TS-1 removed rhodamine B at 1.7 and 2.6 times the efficiency of TpPa-1 and TS-1, respectively. Additional investigation revealed that the Freundlich adsorption isotherm and the pseudo-second-order kinetic model could be employed to represent the adsorption process more appropriately. Thermodynamic calculation analysis showed that the adsorption process proceeded spontaneously and exothermically. Besides, the effects of pH, absorbent mass and ionic strength on the adsorption performance were systematically investigated. The prepared composite adsorbent showed a slight decrease in removal efficiency after eight cycles of repeated use, and real water environment experiments also showed the high stability of the adsorbent. The enhanced performance can be attributed to electrostatic interaction, acid-base interaction, hydrogen bonding and π-π interactions.

Review and perspectives on TS-1 catalyzed propylene epoxidation

Titanium silicate zeolite (TS-1) is widely used in the research on selective oxidations of organic substrates by H2O2. Compared with the chlorohydrin process and the hydroperoxidation process, the TS-1 catalyzed hydroperoxide epoxidation of propylene oxide (HPPO) has advantages in terms of by-products and environmental friendliness. This article reviews the latest progress in propylene epoxidation catalyzed by TS-1, including the HPPO process and gas phase epoxidation. The preparation and modification of TS-1 for green and sustainable production are summarized, including the use of low-cost feedstocks, the development of synthetic routes, strategies to enhance mass transfer in TS-1 crystal and the enhancement of catalytic performance after modification. In particular, this article summarizes the catalytic mechanisms and advanced characterization techniques for propylene epoxidation in recent years. Finally, the present situation, development prospect and challenge of propylene epoxidation catalyzed by TS-1 were prospected.

Nano-Cavities within Nano-Zeolites: The Influencing Factors of the Fabricating Process on Their Catalytic Activities

Titanium silicalite-1 (TS-1) is a milestone heterogeneous catalyst with single-atom tetrahedral titanium incorporated into silica framework for green oxidation reactions. Although TS-1 catalysts have been industrialized, the strategy of direct hydrothermal synthesis usually produces catalysts with low catalytic activities, which has still puzzled academic and industrial scientists. Post-treatment processes were widely chosen and were proven to be an essential process for the stable production of the high-activity zeolites with hollow structures. However, the reasons why post-treatment processes could improve catalytic activity are still not clear enough. Here, high-performance hollow TS-1 zeolites with nano-sized crystals and nano-sized cavities were synthesized via post-treatment of direct-synthesis nano-sized TS-1 zeolites. The influencing factors of the fabricating processes on their catalytic activities were investigated in detail, including the content of alkali metal ions, the state of titanium centers, hydrophilic/hydrophobic properties, and accessibility of micropores. The post-treatment processes could effectively solve these adverse effects to improve catalytic activity and to stabilize production. These findings contribute to the stable preparation of high-performance TS-1 catalysts in both factories and laboratories.

A novel MOFs-induced strategy for preparing anatase-free hierarchical TS-1 zeolite:synthesis routes, growth mechanisms and enhanced catalytic performance

Titanosilicate-1 zeolites (TS-1) as one of the most commonly used catalysts for alkene epoxidation, construction of hierarchical pores as well as elimination of anatase to promote mass transportation and avoid invalid decomposition of hydrogen peroxide are always desirable yet challenging goals. Here, a novel and unique Ti-based metal organic frameworks (MOFs)-induced synthetic strategy for fabricating anatase-free hierarchical TS-1 was first proposed. All the components of MOFs perform different functions: the uniformly distributed Ti nodes replace conventional tetrabutyl titanate (TBOT) to serve as sole Ti source for constructing zeolite crystal; the separated ligands can be embedded in the zeolite framework and act as template to in situ build hierarchical pore structure; the coordination interaction between Ti nodes and ligands can efficiently avoid the anatase generation by balancing the forming rates of Ti-OH and Si-OH. This synthetic strategy is of general applicability, and two different synthetic routes including traditional hydrothermal process and steam assisted crystallization (SAC) procedure are successfully adopted. The obtained hydrothermal TS-1 and SAC anatase-free samples all possess abundant intercrystalline mesopores of 20-50 nm and even macropores between 50 and 150 nm, improving the conversion over 25 % for 1‑hexene epoxidation than TS-1 sample prepared by conventional route. The influences of the amount of Ti MOFs precursor and the crystallization process are studied in detail, and possible synthesis mechanisms are proposed. This MOFs-induced strategy might open up an avenue for the rational design of ideal and hierarchical zeolite to boost the catalytic efficiency.

Hydrothermal Modification of TS-1 Zeolites with Organic Amines and Salts to Construct Highly Selective Catalysts for Cyclopentene Epoxidation

Developing efficient heterogeneous catalysts for cyclic olefins epoxidation is highly attractive for meeting the growing need for various cyclic epoxides. Herein, hierarchical TS-1 zeolite with relatively abundant mesopores and less amount of surface hydroxyl groups was obtained by hydrothermal modification of an as-synthesized TS-1 zeolite with a mixed solution of ammonia, tetrapropylammonium bromide (TPABr) and KCl. The post-modified TS-1 zeolite exhibited much higher catalytic activity (52% conversion) and epoxide selectivity (98%) for the epoxidation of cyclopentene than the conventional TS-1 zeolites. The excellent catalytic activity of the hierarchical TS-1 could be mainly assigned to the enhancement of the mass transport ability and the accessibility of the active Ti species, while the improvement of epoxidation selectivity may be mainly related to the introduction of a certain amount of K+ that can effectively modulate the coordination environment of Ti species as well as the polarity of the zeolite. This work demonstrated that a highly active and selective catalyst for the H2O2-mediated cyclopentene epoxidation could be obtained by concurrently generating mesopore and extinguishing the unfavorable defective hydroxyl groups through the simple hydrothermal treatment of the conventional TS-1 zeolite with a mixed base/salt solution.

Metal Sites in Zeolites: Synthesis, Characterization, and Catalysis

Zeolites with ordered microporous systems, distinct framework topologies, good spatial nanoconfinement effects, and superior (hydro)thermal stability are an ideal scaffold for planting diverse active metal species, including single sites, clusters, and nanoparticles in the framework and framework-associated sites and extra-framework positions, thus affording the metal-in-zeolite catalysts outstanding activity, unique shape selectivity, and enhanced stability and recyclability in the processes of Brønsted acid-, Lewis acid-, and extra-framework metal-catalyzed reactions. Especially, thanks to the advances in zeolite synthesis and characterization techniques in recent years, zeolite-confined extra-framework metal catalysts (denoted as metal@zeolite composites) have experienced rapid development in heterogeneous catalysis, owing to the combination of the merits of both active metal sites and zeolite intrinsic properties. In this review, we will present the recent developments of synthesis strategies for incorporating and tailoring of active metal sites in zeolites and advanced characterization techniques for identification of the location, distribution, and coordination environment of metal species in zeolites. Furthermore, the catalytic applications of metal-in-zeolite catalysts are demonstrated, with an emphasis on the metal@zeolite composites in hydrogenation, dehydrogenation, and oxidation reactions. Finally, we point out the current challenges and future perspectives on precise synthesis, atomic level identification, and practical application of the metal-in-zeolite catalyst system.

Recent Achievements in the Synthesis of Cyclic Carbonates from Olefins and CO2: The Rational Design of the Homogeneous and Heterogeneous Catalytic System

With the consumption of fossil fuels, the level of CO2 in the atmosphere is growing rapidly, which leads to global warming. Hence, the chemical conversion of CO2 into high value-added products is one of the most important approaches to reducing CO2 emissions. Due to being simple, inexpensive and environmentally friendly, the direct synthesis of cyclic carbonates from olefins and CO2 is a promising project for industrial application. In this review, we discuss the design of the homogeneous and heterogeneous catalytic system for the synthesis of cyclic carbonates from the reaction of olefins and CO2. Usually, the catalyst contains the epoxidation active site and the cycloaddition active site, which could achieve the oxidation of oleifins and the CO2-insert, respectively. This review will provide a comprehensive overview of the direct synthesis of cyclic carbonates from olefins and CO2 catalyzed by homogeneous and heterogeneous catalysts. The focus mainly lies on the rational fabrication of multifunctional catalysts, and provides a new perspective for the design of catalysts.