Structure sensitivity of CuO in CO oxidation over CeO2-CuO/Cu2O catalysts

Boosting Electrooxidation of Ethanol by Nickel Addition to Metallic Glass Ribbon Precursors

A CuNiCe-O nanocomposite was fabricated on the Cu40Ni20Al10Ce26Pt3Ru1 metallic glass (MG) ribbon surface by dealloying. The influences of Ni and dealloying time on the morphology and EOR performance were analyzed. The results suggest that the catalytic activity and stability of the dealloyed MG ribbon could be significantly enhanced owing to the alloying of Ni to the Cu60Al10Ce26Pt3Ru1 MG ribbon precursor. The activated D-Cu40Ni20Al10Ce26Pt3Ru1 ribbon obtained at an etching time of 3 h had a better electrochemical ethanol oxidation reaction (EOR) performance than other dealloyed samples due to the formation of abundant active sites and the presence of defects within the CuNiCe-O composite.

Enhancing the CO Oxidation Performance of Copper by Alloying with Immiscible Tantalum

Copper-tantalum (Cu-Ta) immiscible alloy nanoparticles (NPs) have been the subject of extensive research in the field of structural materials, due to their exceptional nanostructural stability and high-temperature creep properties. However, Cu is also a highly active oxidation catalyst due to its abundant valence changes. In this study, we have for the first time obtained homogeneous CuxTa1-x (x = 0.5, 0.7, 0.9, 1) nanoparticles by wet coreduction with an average particle size of approximately 30 nm. Testing verified all the CuxTa1-x/TiO2 (x = 0.5, 0.7, 0.9) showed higher CO oxidation activity than Cu/TiO2, with Cu0.7Ta0.3/TiO2 exhibiting the most promising performance. The temperature-programmed reduction with hydrogen demonstrated that Cu0.7Ta0.3/TiO2 exhibits enhanced redox properties. While kinetic studies indicated that the reaction of the Cu0.7Ta0.3/TiO2 catalyst followed the Langmuir-Hinshelwood mechanism, in situ diffuse reflectance infrared Fourier transform spectroscopy (in situ DRIFTS) verified the introduction of Ta induced the generation of bicarbonate as an intermediate product and increased the adsorption capacity of Cu+ on CO in the catalyst, which facilitated the reaction of surface adsorbed CO with oxygen and led to the enhanced CO oxidation activity.

Unveiling the Promoting Mechanism of H2 Activation on CuFeOx Catalyst for Low-Temperature CO Oxidation

The effect of H2 activation on the performance of CuFeOx catalyst for low-temperature CO oxidation was investigated. The characterizations of XRD, XPS, H2-TPR, O2-TPD, and in situ DRIFTS were employed to establish the relationship between physicochemical property and catalytic activity. The results showed that the CuFeOx catalyst activated with H2 at 100 °C displayed higher performance, which achieved 99.6% CO conversion at 175 °C. In addition, the H2 activation promoted the generation of Fe2+ species, and more oxygen vacancy could be formation with higher concentration of Oα species, which improved the migration rate of oxygen species in the reaction process. Furthermore, the reducibility of the catalyst was enhanced significantly, which increased the low-temperature activity. Moreover, the in situ DRIFTS experiments revealed that the reaction pathway of CO oxidation followed MvK mechanism at low temperature (<175 °C), and both MvK and L-H mechanism was involved at high temperature. The Cu+-CO and carbonate species were the main reactive intermediates, and the H2 activation increased the concentration of Cu+ species and accelerated the decomposition carbonate species, thus improving the catalytic performance effectively.

Hydroxyls on CeO2 Support Promoting CuO/CeO2 Catalyst for Efficient CO Oxidation and NO Reduction by CO

Transition metal catalysts, such as copper oxide, are more attractive alternatives to noble metal catalysts for emission control due to their higher abundance, lower cost, and excellent catalytic activity. In this study, we report the preparation and application of a novel CuO/CeO2 catalyst using a hydroxyl-rich Ce(OH)x support for CO oxidation and NO reduction by CO. Compared to the catalyst prepared from a regular CeO2 support, the new CuO/CeO2 catalyst prepared from the OH-rich Ce(OH)x (CuO/CeO2-OH) showed significantly higher catalytic activity under different testing conditions. The effect of OH species in the CeO2 support on the catalytic performance and physicochemical properties of the CuO/CeO2 catalyst was characterized in detail. It is demonstrated that the abundant OH species enhanced the CuOx dispersion on CeO2, increased the CuOx-CeO2 interfaces and surface defects, promoted the oxygen activation and mobility, and boosted the NO adsorption and dissociation on CuO/CeO2-OH, thus contributing to its superior catalytic activity for both CO oxidation and NO reduction by CO. These results suggest that the OH-rich Ce(OH)x is a superior support for the preparation of highly efficient metal catalysts for different applications.

Formation of superoxide and ozone-like species on Cu doped CeO2(111) and their CO oxidation reactivity: a DFT study

The adsorption of O2 on Cu/CeO2(111) and the CO oxidation reactivity of the formed oxygen species were studied using the DFT method. The results showed that superoxide species (O2δ-), which directly interacted with Cu, formed when O2 adsorbed on the surface oxygen vacancies, while O2 adsorbed on the subsurface oxygen vacancies gave rise to ozone-like O3δ- species by combining with the nearest surface lattice oxygen (O1). PDOS showed that hybridization of the 2p orbitals between O2 and O1 formed a delocalized π bond, confirming the formation of O3δ-. For O2δ-, electrons on Cu and O1 transferred to O2 while the charge of Ce remained unchanged. However, for O3δ-, the transferred electrons were mainly from O1, and partially from O2, Ce1 and Ce2. It was very interesting that Cu also received a few electrons in the latter case. Compared with CO directly adsorbed on lattice oxygen, the two oxygen species were active for CO oxidation, forming CO2 or carbonates, and higher absolute adsorption energy was obtained with the interaction between CO and O3δ-. The findings of this study provide new insight on the CO oxidation reaction mechanism, facilitating an in-depth understanding of Cu-doped CeO2 catalysts.

Time-dependent exfoliation study of MoS2 for its use as a cathode material in high-performance hybrid supercapacitors

Quick and precise exfoliation of bulk molybdenum sulphide into few layers can bring a quantum leap in the electrochemical performance of this material. Such a cost-effective exfoliation route to obtain few layers of MoS₂ nanosheets with a high mass yield of ∼75% is presented in this study. The electrochemical behaviours of three types of samples, namely pristine MoS₂ and MoS₂ exfoliated for 3 h and 5 h, were compared and the reasons leading to their performance modulation are explained. The performance could be tuned by changing the nature of the electrolytes, as shown using three different electrolytes, i.e. H₂SO₄, Na₂SO₄, and KOH. The electrochemical performance of a supercapacitor device fabricated using the 5 h-exfoliated sample showed many fold improvement. The strategy of combining with a 2D material-based anode is an interesting way forward for such devices. In addition, the anode material has to be carefully chosen so that high performance can be ensured. The usefulness of 2D flake-like WO₃ as an anode was investigated first before establishing its worthiness in a hybrid device. The hybrid device was able to deliver an excellent energy density of 33.74 W h kg^-1 with long-term cycling stability and coulombic efficiency, thus proving its applicability for high-performance energy-storage devices.