Society of cardiovascular computed tomography expert consensus document on myocardial computed tomography perfusion imaging

Coronary artery calcium assessment on non-gated chest CT to optimize pre-operative cardiac screening in liver transplantation

BACKGROUND

Guidelines recommend standard pre-operative cardiac screening in all liver transplantation (LT) recipients, despite the relatively low prevalence of obstructive coronary artery disease. Most LT recipients often have non-gated computed tomography (CT) performed of the chest and abdomen. This study evaluated the ability of coronary artery calcification (CAC) assessment on consecutively available scans, to identify a selection of low-risk patients, in whom further cardiac imaging can be safely withheld.

METHODS

LT recipients with prior non-gated CT chest-abdomen were included. CAC was visually scored on a semi-quantitative ordinal scale. Stress myocardial perfusion, coronary CT angiography (CCTA) and invasive coronary angiography (ICA) were used as golden standard. The sensitivity and specificity of CAC to exclude and predict obstructive CAD were assessed. In addition, peri- and postoperative mortality and cardiac events were analyzed.

RESULTS

149 LT recipients (ranged 31-71 years) were included. In 75% of patients, no CAC and mild CAC could rule out obstructive CAD on CCTA and ICA with 100% certainty. The threshold of mild CAC had a sensitivity of 100% for both CCTA and ICA and a specificity of 91% and 68%, respectively. None of the patients with no or mild calcifications experienced peri- and post-operative cardiac events or died of cardiac causes.

CONCLUSION

Visual evaluation of CAC on prior non-gated CT can accurately and safely exclude obstructive CAD in LT recipients. Incorporation of these already available data can optimize cardiac screening, by safely withholding or correctly allocating dedicated cardiac imaging in LT recipients. Thereby, reducing patients' test burden and save health care expenses.

Dynamic CT Myocardial Perfusion: The Role of Functional Evaluation in the Diagnosis of Coronary Artery Disease

Coronary computed tomography angiography (CTA) is a widely accepted, non-invasive diagnostic modality for the evaluation of patients with suspected coronary artery disease (CAD). However, a limitation of CTA is its inability to provide information on the hemodynamic significance of the coronary lesion. The recently developed stress dynamic CT perfusion technique has emerged as a potential solution to this diagnostic challenge. Dynamic CT myocardial perfusion provides information on the hemodynamic consequences of coronary stenosis and is used to detect myocardial ischemia. The combination of stress dynamic CT myocardial perfusion with CTA provides a comprehensive assessment that integrates anatomical and functional information. CT myocardial perfusion has been validated in several clinical studies and has shown comparable accuracy to Positron Emission Tomography (PET) and stress magnetic resonance imaging (MRI) in the diagnosis of hemodynamically significant coronary stenosis and superior performance to Single Photon Emission Computed Tomography (SPECT). More importantly, CTP-derived myocardial perfusion has been shown to have a strong correlation with FFR, and the use of CTP results in a reduction of negative catheterizations. In the context of suspected stable coronary artery disease, the CT protocol with dynamic perfusion imaging combined with CTA eliminates the need for additional testing, making it a convenient "one-stop-shop" method and an effective gatekeeper to an invasive approach.

Assessment of Computed Tomography Perfusion Research Landscape: A Topic Modeling Study

The number of scholarly articles continues to rise. The continuous increase in scientific output poses a challenge for researchers, who must devote considerable time to collecting and analyzing these results. The topic modeling approach emerges as a novel response to this need. Considering the swift advancements in computed tomography perfusion (CTP), we deem it essential to launch an initiative focused on topic modeling. We conducted a comprehensive search of the Scopus database from 1 January 2000 to 16 August 2023, to identify relevant articles about CTP. Using the BERTopic model, we derived a group of topics along with their respective representative articles. For the 2020s, linear regression models were used to identify and interpret trending topics. From the most to the least prevalent, the topics that were identified include "Tumor Vascularity", "Stroke Assessment", "Myocardial Perfusion", "Intracerebral Hemorrhage", "Imaging Optimization", "Reperfusion Therapy", "Postprocessing", "Carotid Artery Disease", "Seizures", "Hemorrhagic Transformation", "Artificial Intelligence", and "Moyamoya Disease". The model provided insights into the trends of the current decade, highlighting "Postprocessing" and "Artificial Intelligence" as the most trending topics.

Dynamic myocardial CT perfusion imaging-state of the art

In patients with suspected coronary artery disease (CAD), dynamic myocardial computed tomography perfusion (CTP) imaging combined with coronary CT angiography (CTA) has become a comprehensive diagnostic examination technique resulting in both anatomical and quantitative functional information on myocardial blood flow, and the presence and grading of stenosis. Recently, CTP imaging has been proven to have good diagnostic accuracy for detecting myocardial ischemia, comparable to stress magnetic resonance imaging and positron emission tomography perfusion, while being superior to single photon emission computed tomography. Dynamic CTP accompanied by coronary CTA can serve as a gatekeeper for invasive workup, as it reduces unnecessary diagnostic invasive coronary angiography. Dynamic CTP also has good prognostic value for the prediction of major adverse cardiovascular events. In this article, we will provide an overview of dynamic CTP, including the basics of coronary blood flow physiology, applications and technical aspects including protocols, image acquisition and reconstruction, future perspectives, and scientific challenges. KEY POINTS: • Stress dynamic myocardial CT perfusion combined with coronary CTA is a comprehensive diagnostic examination technique resulting in both anatomical and quantitative functional information. • Dynamic CTP imaging has good diagnostic accuracy for detecting myocardial ischemia comparable to stress MRI and PET perfusion. • Dynamic CTP accompanied by coronary CTA may serve as a gatekeeper for invasive workup and can guide treatment in obstructive coronary artery disease.

The Non-Invasive Diagnosis of Chronic Coronary Syndrome: A Focus on Stress Computed Tomography Perfusion and Stress Cardiac Magnetic Resonance

Coronary artery disease is still a major cause of death and morbidity worldwide. In the setting of chronic coronary disease, demonstration of inducible ischemia is mandatory to address treatment. Consequently, scientific and technological efforts were made in response to the request for non-invasive diagnostic tools with better sensitivity and specificity. To date, clinicians have at their disposal a wide range of stress-imaging techniques. Among others, stress cardiac magnetic resonance (S-CMR) and computed tomography perfusion (CTP) techniques both demonstrated their diagnostic efficacy and prognostic value in clinical trials when compared to other non-invasive ischemia-assessing techniques and invasive fractional flow reserve measurement techniques. Standardized protocols for both S-CMR and CTP usually imply the administration of vasodilator agents to induce hyperemia and contrast agents to depict perfusion defects. However, both methods have their own limitations, meaning that optimizing their performance still requires a patient-tailored approach. This review focuses on the characteristics, drawbacks, and future perspectives of these two techniques.

Quantification of myocardial blood flow using dynamic myocardial CT perfusion compared with 82Rb PET

PURPOSE

Absolute measures of myocardial blood flow (MBF) obtained with dynamic myocardial CT perfusion (DM-CTP) are underestimated when compared with reference standards. This is to some extent explained by incomplete extraction of iodinated contrast agent (iCA) to the myocardial tissue. We aimed to establish an extraction function for iCA, use the function to calculate MBF_CT and to compare this with MBF measured with ⁸²Rb positron emission tomography (PET).

MATERIALS AND METHODS

Healthy individuals without coronary artery disease (CAD) were examined with ⁸²Rb PET and DM-CTP. The factors a and β of the generalized Renkin-Crone model were estimated using a non-linear least squares model. The factors providing the best fit for the data were subsequently used to calculate MBF_CT.

RESULTS

Of consecutive 91 individuals examined, 79 were eligible for analysis. The factors a and β providing the best fit of the nonlinear least-squares model to the data were a ​= ​0.614 and β ​= ​0.218 (R-squared ​= ​0.81). Conversion of the CT inflow parameter (K1) values using the derived extraction function resulted in a significant correlation between MBF measured during stress using CT and PET (P ​= ​0.039).

CONCLUSION

In healthy individuals, flow estimates obtained with dynamic myocardial CT perfusion during stress were, after conversion to MBF using the extraction of iodinated CT contrast agent, correlated with absolute MBF quantified with ⁸²Rb PET.

Computed tomographic angiography in coronary artery disease

Coronary computed tomographic angiography (CCTA) is becoming the first-line investigation for establishing the presence of coronary artery disease and, with fractional flow reserve (FFRCT), its haemodynamic significance. In patients without significant epicardial obstruction, its role is either to rule out atherosclerosis or to detect subclinical plaque that should be monitored for plaque progression/regression following prevention therapy and provide risk classification. Ischaemic non-obstructive coronary arteries are also expected to be assessed by non-invasive imaging, including CCTA. In patients with significant epicardial obstruction, CCTA can assist in planning revascularisation by determining the disease complexity, vessel size, lesion length and tissue composition of the atherosclerotic plaque, as well as the best fluoroscopic viewing angle; it may also help in selecting adjunctive percutaneous devices (e.g., rotational atherectomy) and in determining the best landing zone for stents or bypass grafts.

2022 use of coronary computed tomographic angiography for patients presenting with acute chest pain to the emergency department: An expert consensus document of the Society of cardiovascular computed tomography (SCCT): Endorsed by the American College of Radiology (ACR) and North American Society for cardiovascular Imaging (NASCI)

Coronary computed tomography angiography (CTA) improves the quality of care for patients presenting with acute chest pain (ACP) to the emergency department (ED), particularly in patients with low to intermediate likelihood of acute coronary syndrome (ACS). The Society of Cardiovascular Computed Tomography Guidelines Committee was formed to develop recommendations for acquiring, interpreting, and reporting of coronary CTA to ensure appropriate, safe, and efficient use of this modality. Because of the increasing use of coronary CTA testing for the evaluation of ACP patients, the Committee has been charged with the development of the present document to assist physicians and technologists. These recommendations were produced as an educational tool for practitioners evaluating acute chest pain patients in the ED, in the interest of developing systematic standards of practice for coronary CTA based on the best available data or broad expert consensus. Due to the highly variable nature of medical care, approaches to patient selection, preparation, protocol selection, interpretation or reporting that differs from these guidelines may represent an appropriate variation based on a legitimate assessment of an individual patient's needs.

Technical Considerations for Dynamic Myocardial Computed Tomography Perfusion as Part of a Comprehensive Evaluation of Coronary Artery Disease Using Computed Tomography

Dynamic myocardial computed tomography perfusion (DM-CTP) has good diagnostic accuracy for identifying myocardial ischemia as compared with both invasive and noninvasive reference standards. However, DM-CTP has not yet been implemented in the routine clinical examination of patients with suspected or known coronary artery disease. An important hurdle in the clinical dissemination of the method is the development of the DM-CTP acquisition protocol and image analysis. Therefore, the aim of this article is to provide a review of critical parameters in the design and execution of DM-CTP to optimize each step of the examination and avoid common mistakes. We aim to support potential users in the successful implementation and performance of DM-CTP in daily practice. When performed appropriately, DM-CTP may support clinical decision making. In addition, when combined with coronary computed tomography angiography, it has the potential to shorten the time to diagnosis by providing immediate visualization of both coronary atherosclerosis and its functional relevance using one single modality.

Image quality and diagnostic accuracy of different dosages of iodixanol in computed tomography angiography and perfusion of overweight patients with coronary artery stenosis: A feasibility study

OBJECTIVES

Iodixanol contrast media with different doses using computed tomography angiography (CTA) and perfusion (CTP) to diagnose coronary artery disease (CAD) in overweight patients lacks assessment. Our study compared iodixanol 320 mg I/ml and 270 mg I/ml on image quality and accuracy of CTA combined CTP (CTA-CTP) to diagnose CAD.

METHODS

Overweight patients with suspected of CAD were randomized into iodixanol 270 group (received iodixanol 270 mg I/ml) and iodixanol 320 group (received iodixanol 320 mg I/ml). Based on these characteristics data, receiver operating characteristic (ROC) curve and corresponding area under the curve (AUC) were plotted to assess the sensitivity and specificity of the two administrations.

RESULTS

The subjective definition score, signal to noise ratio, and CT value of aorta in iodixanol 320 group were higher than iodixanol 270 group. In iodixanol 270 group: the image exhibited a normal state of both vessels and myocardial perfusion; and the AUC, specificity, and sensitivity were 0.376, 66.67, and 80.46, respectively. In iodixanol 320 group: the image exhibited a diameter stenosis in right coronary artery and myocardial infarction of inferior wall and proximal inferior wall septum, as well as myocardial perfusion defects; and the AUC, specificity, and sensitivity in iodixanol 320 group were 0.824, 75.00, and 89.87, respectively.

CONCLUSION

Accuracy and image quality of iodixanol 320 mg I/ml in the diagnosis of CAD with CTA-CTP was higher than using iodixanol 270 mg I/ml.

CAD-RADS™ 2.0 - 2022 Coronary Artery Disease-Reporting and Data System: An Expert Consensus Document of the Society of Cardiovascular Computed Tomography (SCCT), the American College of Cardiology (ACC), the American College of Radiology (ACR), and the North America Society of Cardiovascular Imaging (NASCI)

Coronary Artery Disease Reporting and Data System (CAD-RADS) was created to standardize reporting system for patients undergoing coronary CT angiography (CCTA) and to guide possible next steps in patient management. The goal of this updated 2022 CAD-RADS 2.0 is to improve the initial reporting system for CCTA by considering new technical developments in cardiac CT, including data from recent clinical trials and new clinical guidelines. The updated CAD-RADS classification will follow an established framework of stenosis, plaque burden, and modifiers, which will include assessment of lesion-specific ischemia using CT fractional-flow-reserve (CT-FFR) or myocardial CT perfusion (CTP), when performed. Similar to the method used in the original CAD-RADS version, the determinant for stenosis severity classification will be the most severe coronary artery luminal stenosis on a per-patient basis, ranging from CAD-RADS 0 (zero) for absence of any plaque or stenosis to CAD-RADS 5 indicating the presence of at least one totally occluded coronary artery. Given the increasing data supporting the prognostic relevance of coronary plaque burden, this document will provide various methods to estimate and report total plaque burden. The addition of P1 to P4 descriptors are used to denote increasing categories of plaque burden. The main goal of CAD-RADS, which should always be interpreted together with the impression found in the report, remains to facilitate communication of test results with referring physicians along with suggestions for subsequent patient management. In addition, CAD-RADS will continue to provide a framework of standardization that may benefit education, research, peer-review, artificial intelligence development, clinical trial design, population health and quality assurance with the ultimate goal of improving patient care.

CAD-RADS™ 2.0 - 2022 Coronary Artery Disease - Reporting and Data System.: An expert consensus document of the Society of Cardiovascular Computed Tomography (SCCT), the American College of Cardiology (ACC), the American College of Radiology (ACR) and the North America Society of Cardiovascular Imaging (NASCI)

Coronary Artery Disease Reporting and Data System (CAD-RADS) was created to standardize reporting system for patients undergoing coronary CT angiography (CCTA) and to guide possible next steps in patient management. The goal of this updated 2022 CAD-RADS 2.0 is to improve the initial reporting system for CCTA by considering new technical developments in Cardiac CT, including data from recent clinical trials and new clinical guidelines. The updated CAD-RADS classification will follow an established framework of stenosis, plaque burden, and modifiers, which will include assessment of lesion-specific ischemia using CT fractional-flow-reserve (CT-FFR) or myocardial CT perfusion (CTP), when performed. Similar to the method used in the original CAD-RADS version, the determinant for stenosis severity classification will be the most severe coronary artery luminal stenosis on a per-patient basis, ranging from CAD-RADS 0 (zero) for absence of any plaque or stenosis to CAD-RADS 5 indicating the presence of at least one totally occluded coronary artery. Given the increasing data supporting the prognostic relevance of coronary plaque burden, this document will provide various methods to estimate and report total plaque burden. The addition of P1 to P4 descriptors are used to denote increasing categories of plaque burden. The main goal of CAD-RADS, which should always be interpreted together with the impression found in the report, remains to facilitate communication of test results with referring physicians along with suggestions for subsequent patient management. In addition, CAD-RADS will continue to provide a framework of standardization that may benefit education, research, peer-review, artificial intelligence development, clinical trial design, population health and quality assurance with the ultimate goal of improving patient care.

CAD-RADS™ 2.0 - 2022 Coronary Artery Disease-Reporting and Data System: An Expert Consensus Document of the Society of Cardiovascular Computed Tomography (SCCT), the American College of Cardiology (ACC), the American College of Radiology (ACR), and the North America Society of Cardiovascular Imaging (NASCI)

Coronary Artery Disease Reporting and Data System (CAD-RADS) was created to standardize reporting system for patients undergoing coronary CT angiography (CCTA) and to guide possible next steps in patient management. The goal of this updated 2022 CAD-RADS 2.0 is to improve the initial reporting system for CCTA by considering new technical developments in Cardiac CT, including data from recent clinical trials and new clinical guidelines. The updated CAD-RADS classification will follow an established framework of stenosis, plaque burden, and modifiers, which will include assessment of lesion-specific ischemia using CT fractional-flow-reserve (CT-FFR) or myocardial CT perfusion (CTP), when performed. Similar to the method used in the original CAD-RADS version, the determinant for stenosis severity classification will be the most severe coronary artery luminal stenosis on a per-patient basis, ranging from CAD-RADS 0 (zero) for absence of any plaque or stenosis to CAD-RADS 5 indicating the presence of at least one totally occluded coronary artery. Given the increasing data supporting the prognostic relevance of coronary plaque burden, this document will provide various methods to estimate and report total plaque burden. The addition of P1 to P4 descriptors are used to denote increasing categories of plaque burden. The main goal of CAD-RADS, which should always be interpreted together with the impression found in the report, remains to facilitate communication of test results with referring physicians along with suggestions for subsequent patient management. In addition, CAD-RADS will continue to provide a framework of standardization that may benefit education, research, peer-review, artificial intelligence development, clinical trial design, population health and quality assurance with the ultimate goal of improving patient care.

CAD-RADS™ 2.0 - 2022 Coronary Artery Disease - Reporting and Data System An Expert Consensus Document of the Society of Cardiovascular Computed Tomography (SCCT), the American College of Cardiology (ACC), the American College of Radiology (ACR) and the North America Society of Cardiovascular Imaging (NASCI)

Coronary Artery Disease Reporting and Data System (CAD-RADS) was created to standardize reporting system for patients undergoing coronary CT angiography (CCTA) and to guide possible next steps in patient management. The goal of this updated 2022 CAD-RADS 2.0 is to improve the initial reporting system for CCTA by considering new technical developments in Cardiac CT, including data from recent clinical trials and new clinical guidelines. The updated CAD-RADS classification will follow an established framework of stenosis, plaque burden, and modifiers, which will include assessment of lesion-specific ischemia using CT fractional-flow-reserve (CT-FFR) or myocardial CT perfusion (CTP), when performed. Similar to the method used in the original CAD-RADS version, the determinant for stenosis severity classification will be the most severe coronary artery luminal stenosis on a per-patient basis, ranging from CAD-RADS 0 (zero) for absence of any plaque or stenosis to CAD-RADS 5 indicating the presence of at least one totally occluded coronary artery. Given the increasing data supporting the prognostic relevance of coronary plaque burden, this document will provide various methods to estimate and report total plaque burden. The addition of P1 to P4 descriptors are used to denote increasing categories of plaque burden. The main goal of CAD-RADS, which should always be interpreted together with the impression found in the report, remains to facilitate communication of test results with referring physicians along with suggestions for subsequent patient management. In addition, CAD-RADS will continue to provide a framework of standardization that may benefit education, research, peer-review, artificial intelligence development, clinical trial design, population health and quality assurance with the ultimate goal of improving patient care. Keywords: Coronary Artery Disease, Coronary CTA, CAD-RADS, Reporting and Data System, Stenosis Severity, Report Standardization Terminology, Plaque Burden, Ischemia Supplemental material is available for this article. This article is published synchronously in Radiology: Cardiothoracic Imaging, Journal of Cardiovascular Computed Tomography, JACC: Cardiovascular Imaging, Journal of the American College of Radiology, and International Journal for Cardiovascular Imaging. © 2022 Society of Cardiovascular Computed Tomography. Published by RSNA with permission.

Fractal analysis of 4D dynamic myocardial stress-CT perfusion imaging differentiates micro- and macrovascular ischemia in a multi-center proof-of-concept study

Fractal analysis of dynamic, four-dimensional computed tomography myocardial perfusion (4D-CTP) imaging might have potential for noninvasive differentiation of microvascular ischemia and macrovascular coronary artery disease (CAD) using fractal dimension (FD) as quantitative parameter for perfusion complexity. This multi-center proof-of-concept study included 30 rigorously characterized patients from the AMPLIFiED trial with nonoverlapping and confirmed microvascular ischemia (n_micro = 10), macrovascular CAD (n_macro = 10), or normal myocardial perfusion (n_normal = 10) with invasive coronary angiography and fractional flow reserve (FFR) measurements as reference standard. Perfusion complexity was comparatively high in normal perfusion (FD_normal = 4.49, interquartile range [IQR]:4.46-4.53), moderately reduced in microvascular ischemia (FD_micro = 4.37, IQR:4.36-4.37), and strongly reduced in macrovascular CAD (FD_macro = 4.26, IQR:4.24-4.27), which allowed to differentiate both ischemia types, p < 0.001. Fractal analysis agreed excellently with perfusion state (κ = 0.96, AUC = 0.98), whereas myocardial blood flow (MBF) showed moderate agreement (κ = 0.77, AUC = 0.78). For detecting CAD patients, fractal analysis outperformed MBF estimation with sensitivity and specificity of 100% and 85% versus 100% and 25%, p = 0.02. In conclusion, fractal analysis of 4D-CTP allows to differentiate microvascular from macrovascular ischemia and improves detection of hemodynamically significant CAD in comparison to MBF estimation.

Clinical applications of cardiac computed tomography: a consensus paper of the European Association of Cardiovascular Imaging-part II

Cardiac computed tomography (CT) was initially developed as a non-invasive diagnostic tool to detect and quantify coronary stenosis. Thanks to the rapid technological development, cardiac CT has become a comprehensive imaging modality which offers anatomical and functional information to guide patient management. This is the second of two complementary documents endorsed by the European Association of Cardiovascular Imaging aiming to give updated indications on the appropriate use of cardiac CT in different clinical scenarios. In this article, emerging CT technologies and biomarkers, such as CT-derived fractional flow reserve, perfusion imaging, and pericoronary adipose tissue attenuation, are described. In addition, the role of cardiac CT in the evaluation of atherosclerotic plaque, cardiomyopathies, structural heart disease, and congenital heart disease is revised.

Static CT myocardial perfusion imaging: image quality, artifacts including distribution and diagnostic performance compared to 82Rb PET

Background

Rubidium-82 positron emission tomography (⁸²Rb PET) MPI is considered a noninvasive reference standard for the assessment of myocardial perfusion in coronary artery disease (CAD) patients. Our main goal was to compare the diagnostic performance of static rest/ vasodilator stress CT myocardial perfusion imaging (CT-MPI) to stress/ rest ⁸²Rb PET-MPI for the identification of myocardial ischemia.

Methods

Forty-four patients with suspected or diagnosed CAD underwent both static CT-MPI and ⁸²Rb PET-MPI at rest and during pharmacological stress. The extent and severity of perfusion defects on PET-MPI were assessed to obtain summed stress score, summed rest score, and summed difference score. The extent and severity of perfusion defects on CT-MPI was visually assessed using the same grading scale. CT-MPI was compared with PET-MPI as the gold standard on a per-territory and a per-patient basis.

Results

On a per-patient basis, there was moderate agreement between CT-MPI and PET-MPI with a weighted 0.49 for detection of stress induced perfusion abnormalities. Using PET-MPI as a reference, static CT-MPI had 89% sensitivity (SS), 58% specificity (SP), 71% accuracy (AC), 88% negative predictive value (NPV), and 59% positive predictive value (PPV) to diagnose stress-rest perfusion deficits on a per-patient basis. On a per-territory analysis, CT-MPI had 73% SS, 65% SP, 67% AC, 90.8% NPV, and 34% PPV to diagnose perfusion deficits.

Conclusions

CT-MPI has high sensitivity and good overall accuracy for the diagnosis of functionally significant CAD using ⁸²Rb PET-MPI as the reference standard. CT-MPI may play an important role in assessing the functional significance of CAD especially in combination with CCTA.

Diagnostic Performance of Dynamic Myocardial Perfusion Imaging Using Dual-Source Computed Tomography

BACKGROUND

Single-center studies indicated a high diagnostic accuracy of dynamic computed tomography perfusion (CTP) imaging in the diagnosis of coronary artery disease (CAD).

OBJECTIVES

This prospective multicenter study determined the diagnostic performance of combined coronary computed tomography angiography (CTA) and CTP for detecting hemodynamically significant CAD defined by invasive coronary angiography (ICA) with fractional flow reserve (FFR).

METHODS

Seven centers enrolled 174 patients with suspected or known CAD who were clinically referred for ICA. CTA and dynamic CTP were performed using dual-source CT before ICA. FFR was done as part of ICA in the case of 26% to 90% coronary diameter stenosis. Hemodynamically significant stenosis was defined as FFR of <0.8 or >90% stenosis on ICA.

RESULTS

The study protocol was completed in 157 participants, and hemodynamically significant stenosis was detected in 76 of 157 patients (48%) and 112 of 442 vessels (25%). According to receiver-operating characteristic curve analysis, adding dynamic CTP to CTA significantly increased the area under the curve from 0.65 (95% CI: 0.57-0.72) to 0.74 (95% CI: 0.66-0.81; P = 0.011) on the patient level, with decreased sensitivity (93% vs 72%; P < 0.001), improved specificity (36% vs 75%; P < 0.001), and improved overall accuracy (64% vs 74%; P < 0.001).

CONCLUSIONS

In this prospective multicenter study on dynamic CTP, the combination of anatomic assessment with coronary CTA and functional evaluation with dynamic CTP allowed more accurate identification of hemodynamically significant CAD compared with CTA alone. However, the clinical significance of this approach needs to be further investigated, including its usefulness in improving prognosis. (Assessment of Myocardial Perfusion Linked to Infarction and Fibrosis Explored With Dual-Source CT [AMPLIFiED]; UMIN000016353).

Quantification of myocardial ischemia and subtended myocardial mass at adenosine stress cardiac computed tomography: a feasibility study

Combination of coronary computed tomography angiography (CCTA) and adenosine stress CT myocardial perfusion (CTP) allows for coronary artery lesion assessment as well as myocardial ischemia. However, myocardial ischemia on CTP is nowadays assessed semi-quantitatively by visual analysis. The aim of this study was to fully quantify myocardial ischemia and the subtended myocardial mass on CTP. We included 33 patients referred for a combined CCTA and adenosine stress CTP protocol, with good or excellent imaging quality on CTP. The coronary artery tree was automatically extracted from the CCTA and the relevant coronary artery lesions with a significant stenosis (≥ 50%) were manually defined using dedicated software. Secondly, epicardial and endocardial contours along with CT perfusion deficits were semi-automatically defined in short-axis reformatted images using MASS software. A Voronoi-based segmentation algorithm was used to quantify the subtended myocardial mass, distal from each relevant coronary artery lesion. Perfusion defect and subtended myocardial mass were spatially registered to the CTA. Finally, the subtended myocardial mass per lesion, total subtended myocardial mass and perfusion defect mass (per lesion) were measured. Voronoi-based segmentation was successful in all cases. We assessed a total of 64 relevant coronary artery lesions. Average values for left ventricular mass, total subtended mass and perfusion defect mass were 118, 69 and 7 g respectively. In 19/33 patients (58%) the total perfusion defect mass could be distributed over the relevant coronary artery lesion(s). Quantification of myocardial ischemia and subtended myocardial mass seem feasible at adenosine stress CTP and allows to quantitatively correlate coronary artery lesions to corresponding areas of myocardial hypoperfusion at CCTA and adenosine stress CTP.

Myocardial perfusion imaging using computed tomography: Current status, clinical value and prognostic implications

Combined anatomical and functional evaluation of coronary artery disease (CAD) using computed tomography (CT) has recently emerged as an accurate, robust, and non-invasive tool for the evaluation of ischemic heart disease. Cardiac CT has become a one-stop-shop imaging modality that allows the simultaneous depiction, characterization, and quantification of coronary atherosclerosis and the assessment of myocardial ischemia. Advancements in scanner technology (improvements in spatial and temporal resolution, dual-energy imaging, wide detector panels) and the implementation of iterative reconstruction algorithms enables the detection of myocardial ischemia in both qualitative and quantitative fashion using low-dose scanning protocols. The addition of CT perfusion (CTP) to standard coronary CT angiography is a reliable tool to improve diagnostic accuracy. CTP using static first-pass imaging enables qualitative assessment of the myocardial tissue, whereas dynamic perfusion imaging can also provide quantitative information on myocardial blood flow. Myocardial tissue assessment by CTP holds the potential to refine risk in stable chest pain or microvascular dysfunction. CTP can aid the detection of residual ischemia after coronary intervention. Comprehensive evaluation of CAD using CTP might therefore improve the selection of patients for aggressive secondary prevention therapy or coronary revascularization with high diagnostic certainty. In addition, prognostic information provided by perfusion CT imaging could improve patient outcomes by quantifying the ischemic burden of the left ventricle. The current review focuses on the clinical value of myocardial perfusion imaging by CT, current status of CTP imaging and the use of myocardial CTP in various patient populations for the diagnosis of ischemic heart disease.

Ischemic Heart Disease: Noninvasive Imaging Techniques and Findings

Ischemic heart disease is a leading cause of death worldwide and comprises a large proportion of annual health care expenditure. Management of ischemic heart disease is now best guided by the physiologic significance of coronary artery stenosis. Invasive coronary angiography is the standard for diagnosing coronary artery stenosis. However, it is expensive and has risks including vascular access site complications and contrast material–induced nephropathy. Invasive coronary angiography requires fractional flow reserve (FFR) measurement to determine the physiologic significance of a coronary artery stenosis. Multiple noninvasive cardiac imaging modalities can also anatomically delineate or functionally assess for significant coronary artery stenosis, as well as detect the presence of myocardial infarction (MI). While coronary CT angiography can help assess the degree of anatomic stenosis, its inability to assess the physiologic significance of lesions limits its specificity. Physiologic significance of coronary artery stenosis can be determined by cardiac MR vasodilator or dobutamine stress imaging, CT stress perfusion imaging, FFR CT, PET myocardial perfusion imaging (MPI), SPECT MPI, and stress echocardiography. Clinically unrecognized MI, another clear indicator of physiologically significant coronary artery disease, is relatively common and is best evaluated with cardiac MRI. The authors illustrate the spectrum of imaging findings of ischemic heart disease (coronary artery disease, myocardial ischemia, and MI); highlight the advantages and disadvantages of the various noninvasive imaging methods used to assess ischemic heart disease, as illustrated by recent clinical trials; and summarize current indications and contraindications for noninvasive imaging techniques for detection of ischemic heart disease.

Online supplemental material is available for this article.

Published under a CC BY 4.0 license.

Optimization of image sampling rate to lower the radiation dose of dynamic myocardial CT perfusion

BACKGROUND

Dynamic myocardial CT perfusion (CTP) has emerged as a potential strategy to combine anatomical and functional evaluation in a single modality. However, this method results in a high radiation dose.

METHODS

Dynamic CTP was performed in 56 patients with suspected or known ischemic heart disease of whom 48 had complete CT-data. Datasets with reduced sampling rate of 2- and 3 RR-intervals (2RR and 3RR) were constructed post hoc. Myocardial blood flow (MBF) estimates from the 2RR and 3RR datasets were compared with estimates based on the full dataset (1RR) using the two one-sided test of equivalence for paired samples.

RESULTS

Significant equivalence was found for rest MBF_LV (p ​< ​0.001), stress MBF_LV (p ​< ​0.001) and for the CFR_LV (p ​= ​0.005) when comparing 2RR blood flow estimates with the results based on the 1RR dataset. The 2RR reconstruction protocol led to an estimated reduction in radiation dose of 35.4 ​± ​3.8%.

CONCLUSION

MBF can be quantitated with dynamic CTP using a sampling strategy of one volume for every second heartbeat. This strategy could lead to a significant reduction in radiation dose.

The Journal of Cardiovascular Computed Tomography: 2020 Year in review

The purpose of this review is to highlight the most impactful, educational, and frequently downloaded articles published in the Journal of Cardiovascular Computed Tomography (JCCT) for the year 2020. The JCCT reached new records in 2020 for the number of research submissions, published manuscripts, article downloads and social media impressions. The articles in this review were selected by the Editorial Board of the JCCT and are comprised predominately of original research publications in the following categories: Coronavirus disease 2019 (COVID-19), coronary artery disease, coronary physiology, structural heart disease, and technical advances. The Editorial Board would like to thank each of the authors, peer-reviewers and the readers of JCCT for making 2020 one of the most successful years in its history, despite the challenging circumstances of the global COVID-19 pandemic.

2020 SCCT Guideline for Training Cardiology and Radiology Trainees as Independent Practitioners (Level II) and Advanced Practitioners (Level III) in Cardiovascular Computed Tomography: A Statement from the Society of Cardiovascular Computed Tomography

Cardiovascular computed tomography (CCT) is a well-validated noninvasive imaging tool with an ever-expanding array of applications beyond the assessment of coronary artery disease. These include the evaluation of structural heart diseases, congenital heart diseases, peri-procedural electrophysiology applications, and the functional evaluation of ischemia. This breadth requires a robust and diverse training curriculum to ensure graduates of CCT training programs meet minimum competency standards for independent CCT interpretation. This statement from the Society of Cardiovascular Computed Tomography aims to supplement existing societal training guidelines by providing a curriculum and competency framework to inform the development of a comprehensive, integrated training experience for cardiology and radiology trainees in CCT. This article is being published synchronously in Radiology: Cardiothoracic Imaging, Journal of Cardiovascular Computed Tomography, and JACC: Cardiovascular Imaging. © 2020 Society of Cardiovascular Computed Tomography. Published by RSNA with permission.

Practical utilization of cardiac computed tomography for the success in complex coronary intervention

Percutaneous coronary intervention (PCI) for complex lesions is still technically demanding and is associated with less favorable procedural parameters such as lower success rate, longer procedural time, higher contrast volume and unexpected complications. Because the conventional angiographic analysis is limited by the inability to visualize the plaque information and the occluded segment, cardiac computed tomography has evolved as an adjunct to invasive angiography to better characterize coronary lesions to improve success rates of PCI. Adding to routine image reconstructions by coronary computed tomography angiography, the thin-slab maximum intensity projection method, which is a handy reconstruction technique on an ordinary workstation, could provide easy-to-understand images to reveal the anatomical characteristics and the lumen and plaque information simultaneously, and then assist to build an in-depth strategy for PCI. Especially in the treatment of chronic total occlusion lesion, these informations have big advantages in the visualization of the morphologies of entry and exit, the occluded segment and the distribution of calcium compared to invasive coronary angiography. Despite of the additional radiation exposure, contrast use and cost for cardiac computed tomography, the precise analysis of lesion characteristics would consequently improve the procedural success and prevent the complication in complex PCI.

2020 SCCT Guideline for Training Cardiology and Radiology Trainees as Independent Practitioners (Level II) and Advanced Practitioners (Level III) in Cardiovascular Computed Tomography: A Statement from the Society of Cardiovascular Computed Tomography

Cardiovascular computed tomography (CCT) is a well-validated non-invasive imaging tool with an ever-expanding array of applications beyond the assessment of coronary artery disease. These include the evaluation of structural heart diseases, congenital heart diseases, peri-procedural electrophysiology applications, and the functional evaluation of ischemia. This breadth requires a robust and diverse training curriculum to ensure graduates of CCT training programs meet minimum competency standards for independent CCT interpretation. This statement from the Society of Cardiovascular Computed Tomography aims to supplement existing societal training guidelines by providing a curriculum and competency framework to inform the development of a comprehensive, integrated training experience for cardiology and radiology trainees in CCT.

2020 SCCT Guideline for Training Cardiology and Radiology Trainees as Independent Practitioners (Level II) and Advanced Practitioners (Level III) in Cardiovascular Computed Tomography: A Statement from the Society of Cardiovascular Computed Tomography

Cardiovascular computed tomography (CCT) is a well-validated non-invasive imaging tool with an ever-expanding array of applications beyond the assessment of coronary artery disease. These include the evaluation of structural heart diseases, congenital heart diseases, peri-procedural electrophysiology applications, and the functional evaluation of ischemia. This breadth requires a robust and diverse training curriculum to ensure graduates of CCT training programs meet minimum competency standards for independent CCT interpretation. This statement from the Society of Cardiovascular Computed Tomography aims to supplement existing societal training guidelines by providing a curriculum and competency framework to inform the development of a comprehensive, integrated training experience for cardiology and radiology trainees in CCT.

Role of Coronary CT Angiography in Spontaneous Coronary Artery Dissection

Spontaneous coronary artery dissection (SCAD) is more common than previously thought and is present in up to 4% of patients presenting with acute coronary syndrome. SCAD predominantly occurs in relatively young women and is an important cause of myocardial infarction in young patients without traditional risk factors of atherosclerotic coronary artery disease. There have been substantial improvements in spatial and temporal resolution and reduction in ionizing radiation dose with new generation scanners. The risk of dissection propagation with an invasive coronary angiogram, improved CT scanner parameters, and predominantly conservative management of SCAD make coronary CT angiography a useful noninvasive imaging modality for the assessment of SCAD. © RSNA, 2020.

Highlights of the 15th annual scientific meeting of the Society of Cardiovascular Computed Tomography

The 15th Society of Cardiovascular Computed Tomography (SCCT) annual scientific meeting (ASM) welcomed 770 digital attendees from 44 countries, over 2 days, with a program that included 30 sessions across three simultaneously streaming channels, 10 exhibitors and a diverse range of scientific abstracts. In addition, #SCCT2020 generated >5900 tweets from nearly 700 engaged social media participants resulting in an estimated 38 million digital impressions and becoming #1 trending medical meeting in social media in the world during the meeting time period. This article summarizes the many themes and topics of presentation and discussion in this meeting, and the many technical advances that are likely to impact future clinical practice in cardiovascular computed tomography.

Coronary Computed Tomography Angiography From Clinical Uses to Emerging Technologies: JACC State-of-the-Art Review

Evaluation of coronary artery disease (CAD) using coronary computed tomography angiography (CCTA) has seen a paradigm shift in the last decade. Evidence increasingly supports the clinical utility of CCTA across various stages of CAD, from the detection of early subclinical disease to the assessment of acute chest pain. Additionally, CCTA can be used to noninvasively quantify plaque burden and identify high-risk plaque, aiding in diagnosis, prognosis, and treatment. This is especially important in the evaluation of CAD in immune-driven conditions with increased cardiovascular disease prevalence. Emerging applications of CCTA based on hemodynamic indices and plaque characterization may provide personalized risk assessment, affect disease detection, and further guide therapy. This review provides an update on the evidence, clinical applications, and emerging technologies surrounding CCTA as highlighted at the 2019 National Heart, Lung and Blood Institute CCTA Summit.

Functional cardiac CT-Going beyond Anatomical Evaluation of Coronary Artery Disease with Cine CT, CT-FFR, CT Perfusion and Machine Learning

The aim of this review is to provide an overview of different functional cardiac CT techniques which can be used to supplement assessment of the coronary arteries to establish the significance of coronary artery stenoses. We focus on cine-CT, CT-FFR, CT-myocardial perfusion and how developments in machine learning can supplement these techniques.

Combined stress myocardial CT perfusion and coronary CT angiography as a feasible strategy among patients presenting with acute chest pain to the emergency department

BACKGROUND

A combined approach of myocardial CT perfusion (CTP) with coronary CT angiography (CTA) was shown to have better diagnostic accuracy than coronary CTA alone. However, data on cost benefits and length of stay when compared to other perfusion imaging modalities has not been evaluated. Therefore, we aim to perform a feasibility study to assess direct costs and length of stay of a combined stress CTP/CTA and use SPECT myocardial perfusion imaging (SPECT-MPI) as a benchmark, among chest pain patients at intermediate-risk for acute coronary syndrome (ACS) presenting to the emergency department (ED).

METHODS

This is a prospective two-arm clinical trial (NCT02538861) with 43 patients enrolled in stress CTP/CTA arm (General Electric Revolution CT) and 102 in SPECT-MPI arm. Mean age of the study population was 65 ​± ​12 years; 56% were men. We used multivariable linear regression analysis to compare length of stay and direct costs between the two modalities.

RESULTS

Overall, 9 out of the 43 patients (21%) with CTP/CTA testing had an abnormal test. Of these 9 patients, 7 patients underwent invasive coronary angiography and 6 patients were found to have obstructive coronary artery disease. Normal CTP/CTA test was found in 34 patients (79%), who were discharged home and all patients were free of major adverse cardiac events at 30 days. The mean length of stay was significantly shorter by 28% (mean difference: 14.7 ​h; 95% CI: 0.7, 21) among stress CTP/CTA (20 ​h [IQR: 16, 37]) compared to SPECT-MPI (30 ​h [IQR: 19, 44.5]). Mean direct costs were significantly lower by 44% (mean difference: $1535; 95% CI: 987, 2082) among stress CTA/CTP ($1750 [IQR: 1474, 2114] compared to SPECT-MPI ($2837 [IQR: 2491, 3554]).

CONCLUSION

Combined stress CTP/CTA is a feasible strategy for evaluation of chest pain patients presenting to ED at intermediate-risk for ACS and has the potential to lead to shorter length of stay and lower direct costs.