High-performance liquid chromatography with ultraviolet detection for real-time therapeutic drug monitoring of meropenem in plasma

Determination of 31 Antimicrobials in Human Serum Using Ultra-High Performance Liquid Chromatography With Diode Array Detection for Application in Therapeutic Drug Monitoring

BACKGROUND

A versatile ultra-high performance liquid chromatography method with diode array detection was developed to quantify a wide range of antibiotics in human serum. This method addresses the need for rapid and accurate determination of antibiotic levels to ensure effective patient treatment and support the fight against antibiotic resistance.

METHODS

This method assesses 31 different compounds covering β-lactams, fluoroquinolones, antifungals, antituberculars, and more. Proteins were precipitated using methanol or acetonitrile, and drugs were extracted by liquid-liquid extraction with dichloromethane. Separation of the antimicrobials was achieved on a pentafluorophenyl column, using a mobile phase of phosphoric acid (0.01 mol/L) and acetonitrile in a gradient elution mode, with a flow rate of 500 μL/min.

RESULTS

Almost all compounds were detected at 200 nm. The total analysis time for this method was kept under 18 minutes, including equilibration time.

CONCLUSIONS

This efficient method enables fast determination of numerous antimicrobial classes, providing clinicians with an essential tool for ensuring effective patient treatment and combating antimicrobial resistance.

Population Pharmacokinetic Modeling of Unbound Meropenem in Patients Undergoing Continuous Renal Replacement Therapy: An Observational Cohort Study

BACKGROUND

The most effective dosing strategy of meropenem for patients undergoing continuous renal replacement therapy (CRRT) remains uncertain. This study aimed to analyze the population pharmacokinetics (popPKs) of unbound meropenem and establish an appropriate dosing approach.

METHODS

This prospective study involved 19 patients for the development of a popPK model and an additional 10 for its validation. Ethical approval was obtained.

RESULTS

The clearance of unbound meropenem was influenced by the sequential organ failure assessment (SOFA) score [=2.22 × (SOFA score/12)^1.88] and the effluent flow rate from the CRRT device, with an interindividual variability of 44.5%. The volume of distribution was affected by the simplified acute physiology score II [=23.1 × (simplified acute physiology score II/52)^1.54]. Monte Carlo simulations suggested meropenem doses ranging from 1.0 to 3.0 g/d using continuous infusion to achieve a target time above the 4 times of minimum inhibitory concentration of the unbound form (% f T >4×MIC ) of 100% for definitive therapy. For empirical therapy, a dose of 1.0 g/d using continuous infusion was recommended to target % f T >MIC of 100%.

CONCLUSIONS

This study developed a popPK model for unbound meropenem in patients undergoing CRRT and formulated dosing guidelines.

CLINICAL TRIAL REGISTRATION

UMIN000024321.

Development and Validation of a Strong Cation Exchange Chromatographic Column Coupled with High-Performance Liquid Chromatography Method for Meropenem and Evaluation of Its Stability in Human Plasma: Application to the Therapeutic Drug Monitoring

Meropenem is a wide inter-individual variability in the pharmacokinetic, and standard dosing may not be adequate in critically ill patients. Therapeutic drug monitoring is a useful tool to optimize dosing. Meropenem is the amphoteric compound with an isoelectric point of 5.15. The secondary amino group of meropenem is positively charged when pH ≤ 5.4, thus we attempted to separate by strong cation exchange (SCX) column using acetonitrile/25-mM potassium dihydrogen phosphate (pH 3.0; 60:40) as mobile phase, and good peak shape and effective separation obtained. Generally, meropenem were unstable in plasma. We try to investigate stability of plasma samples using the medium QC sample with or without 3-(N-morpholino) propanesulfonic acid (MOPS) as stabilizer solutions at possible conditions during handling and storage. Meropenem showed higher stability at -80°C, and addition of MOPS might increase the short-term and extracted samples stability. This method is suitable for the quantification of meropenem in human plasma from 0.5 to 100 μg/mL. The accuracy was ranged from 96.53 to 101.11% with relative standard deviation ≤ 4.76%. The method has been used for determined 63 critically ill patients treated with meropenem. During the first measurement, 11 patients showed trough levels below the target ranges despite standard dosing. Through continuous or prolonged infusion, 8/11 patients (72.73%) led to adequate trough levels. The described SCX-high-performance liquid chromatography method for meropenem in human plasma is a powerful tool for therapeutic drug monitoring.

Population Pharmacokinetic Model and Dosing Simulation of Meropenem Using Measured Creatinine Clearance for Patients with Sepsis

PURPOSE

Creatinine clearance (CCr) and pharmacokinetic parameters are markedly affected by pathophysiological changes in patients with sepsis. However, only a few reports have assessed renal function in patients with sepsis using the measured CCr. Furthermore, the administration regimen has not been sufficiently evaluated using a population PK (PPK) model across renal function broad ranges. Therefore, this study was performed to construct a meropenem PPK model for patients with sepsis using the measured CCr and evaluate the optimized meropenem dosing regimen based on the CCr.

METHODS

Patients with sepsis who received intravenous meropenem at the Showa University Hospital were enrolled in this prospective observational study. The PPK model was constructed using blood samples and clinical information of patients. The probability of target attainment (PTA) indicates the likelihood of achieving 50% time above the minimum inhibitory concentration (% T > MIC) based on 10,000 virtual patients using Monte Carlo simulations. The PTA for each meropenem regimen was 50% T > MIC based on different renal functions using the Monte Carlo simulation.

RESULTS

One hundred samples were collected from 31 patients. The final PPK model incorporating the measured CCr as a covariate in CL displayed the best fit. The recommended dosing regimen to achieve a PTA of 50% T > MIC of 4 mcg/mL was 1 g every 8 hours as a 3-hour prolonged infusion for patients with CCr 85-130 mL/min and 1 g every 8 hours as an 8-hour continuous infusion for patients with CCr ≥ 130 mL/min.

CONCLUSIONS

This model precisely predicted meropenem concentrations in patients with sepsis by accurately evaluating renal function using the measured CCr. Extended dosing was demonstrated to be necessary to achieve a PTA of 50% T > MIC for patients with CCr ≥ 85 mL/min. Meropenem effectiveness can be maximized in patients with sepsis by selecting the appropriate dosing regimen based on renal function and the MIC.

Population PK/PD modelling of meropenem in preterm newborns based on therapeutic drug monitoring data

Background: Preterm neonates rarely participate in clinical trials, this leads to lack of adequate information on pharmacokinetics for most drugs in this population. Meropenem is used in neonates to treat severe infections, and absence of evidence-based rationale for optimal dosing could result in mismanagement.

Aim: The objective of the study was to determine the population pharmacokinetic (PK) parameters of meropenem in preterm infants from therapeutic drug monitoring (TDM) data in real clinical settings and to evaluate pharmacodynamics (PD) indices as well as covariates affecting pharmacokinetics.

Materials and methods: Demographic, clinical and TDM data of 66 preterm newborns were included in PK/PD analysis. The NPAG program from the Pmetrics was used for modelling based on peak-trough TDM strategy and one-compartment PK model. Totally, 132 samples were assayed by high-performance liquid chromatography. Meropenem empirical dosage regimens (40–120 mg/kg/day) were administered by 1–3-h IV infusion 2–3 times a day. Regression analysis was used to evaluate covariates (gestation age (GA), postnatal age (PNA), postconceptual age (PCA), body weight (BW), creatinine clearance, etc.) influenced on PK parameters.

Results: The mean ± SD (median) values for constant rate of elimination (Kel) and volume of distribution (V) of meropenem were estimated as 0.31 ± 0.13 (0.3) 1/h and 1.2 ± 0.4 (1.2) L with interindividual variability (CV) of 42 and 33%, respectively. The median values for total clearance (CL) and elimination half-life (T1/2) were calculated as 0.22 L/h/kg and 2.33 h with CV = 38.0 and 30.9%. Results of the predictive performance demonstrated that the population model by itself gives poor prediction, while the individualized Bayesian posterior models give much improved quality of prediction. The univariate regression analysis revealed that creatinine clearance, BW and PCA influenced significantly T1/2, meropenem V was mostly correlated with BW and PCA. But not all observed PK variability can be explained by these regression models.

Conclusion: A model-based approach in conjunction with TDM data could help to personalize meropenem dosage regimen. The estimated population PK model can be used as Bayesian prior information to estimate individual PK parameter values in the preterm newborns and to obtain predictions of desired PK/PD target once the patient’s TDM concentration(s) becomes available.

Assessment of current practice for β-lactam therapeutic drug monitoring in French ICUs in 2021: a nationwide cross-sectional survey

BACKGROUND

Current guidelines and literature support the use of therapeutic drug monitoring (TDM) to optimize β-lactam treatment in adult ICU patients.

OBJECTIVES

To describe the current practice of β-lactam monitoring in French ICUs.

METHODS

A nationwide cross-sectional survey was conducted from February 2021 to July 2021 utilizing an online questionnaire that was sent as an email link to ICU specialists (one questionnaire per ICU).

RESULTS

Overall, 119 of 221 (53.8%) French ICUs participated. Eighty-seven (75%) respondents reported having access to β-lactam TDM, including 52 (59.8%) with on-site access. β-Lactam concentrations were available in 24-48 h and after 48 h for 36 (41.4%) and 26 (29.9%) respondents, respectively. Most respondents (n = 61; 70.1%) reported not knowing whether the β-lactam concentrations in the TDM results were expressed as unbound fractions or total concentrations. The 100% unbound fraction of the β-lactam above the MIC was the most frequent pharmacokinetic and pharmacodynamic target used (n = 62; 73.0%).

CONCLUSIONS

Despite the publication of international guidelines, β-lactam TDM is not optimally used in French ICUs. The two major barriers are β-lactam TDM interpretation and the required time for results.

Methods for Determination of Meropenem Concentration in Biological Samples

Measuring the concentration of antibiotics in biological samples allow implementation of therapeutic monitoring of these drugs and contribute to the adjustment of the dosing regimen in patients. This increases the effectiveness of antimicrobial therapy, reduces the toxicity of these drugs and prevents the development of bacterial resistance. This review article summarizes current knowledge on methods for determining concentration of meropenem, an antibiotic drug from the group of carbapenems, in different biological samples. It provides a brief discussion of the chemical structure, physicochemical and pharmacokinetic properties of meropenem, different sample preparation techniques, use of apparatus and equipment, knowledge of the advantages and limitations of available methods, as well as directions in which new methods should be developed. This review should facilitate clinical laboratories to select and apply one of the established methods for measuring of meropenem, as well as to provide them with the necessary knowledge to develop new methods for quantification of meropenem in biological samples according to their needs.

Simultaneous determination of six antibiotics in human serum by high-performance liquid chromatography with UV detection

Antibiotics are widely used in intensive care patients to treat severe infections. To avoid bacterial resistance or toxic side effects, the determination of serum concentration of ABs is advisable. Therefore, in this study, we developed and validated a simple and fast high-performance liquid chromatography method with UV detection for the simultaneous determination of four β-lactam ABs (meropenem, imipenem, ceftazidime, and piperacillin) and two coadministered substances (cilastatin and tazobactam) in human serum. Sample preparation required a simple protein precipitation by methanol. The separation of the ABs occurred within a timeframe of 17 min. For this purpose, we used a Kinetex F5 column with a linear gradient of acetonitrile and phosphate buffer (pH 6.9). The UV detector recorded two separate chromatograms at 220 and 295 nm simultaneously. Validation has demonstrated that the method is linear, accurate, and precise within the clinically relevant range for each substance.

A High-Performance Liquid Chromatographic Method for the Determination of Meropenem in Serum

In this study, a new, sensitive and selective high-performance liquid chromatographic method was developed for the determination of meropenem (MEM) in human serum. In the developed method, C18 column (3.9 × 150 mm, 5 μm) was selected as stationary phase at 30°C, and methanol: acetic acid solution mixture was used as mobile phase with gradient program. Chromatographic separation was carried out at a flow rate of 1 mL/min, and detection was performed at 300 nm with diode array detector. Doripenem was selected as an internal standard, and the analytes were extracted from serum using protein precipitation method with ortho-phosphoric acid: methanol. Detection wavelength was selected as 300 nm. The developed method was validated according to International Council for Harmonisation (ICH) guidelines. The calibration curve was linear over a concentration range of 4-240 μg/mL with correlation coefficient of 0.9985. The limit of detection and limit of quantification values were found as 0.057 and 0.192 μg/mL, respectively. The validated method was successfully applied for the determination of MEM in human serum samples collected from patient volunteers at different time intervals, and therapeutic drug monitoring of MEM has been investigated.

A novel reversed-phase high-performance liquid chromatographic assay for the simultaneous determination of imipenem and meropenem in human plasma and its application in TDM

A rapid and specific reversed-phase high-performance liquid chromatographic (RP-HPLC) assay with UV detection has been developed and validated for the simultaneous determination of imipenem and meropenem in human plasma. The extraction process was performed through protein precipitation method using acetonitrile and dichloromethane, and the recoveries of quality controls (QCs) were > 91.5%. Isocratic elution followed by gradient elution of acetonitrile and water was employed over a C18 analytical column for separation. The detection was performed at 298 nm. This method was accurate and reproducible (coefficient of variation, CV < 8%), allowing quantification of carbapenem at the plasma-level ranges from 0.1 to 100 μg/ml without interference of any of the 30 frequently prescribed drugs. Stabilities of imipenem and meropenem were determined with or without stabilizer solutions at -80°C, -20°C, +4 °C and room temperature 20°C. These two drugs showed higher stability at the low temperatures. Addition of 3-(N-morpholino) propanesulfonic acid (MOPS) might also increase their stability. The results of therapeutic drug monitoring (TDM) in neonates and adults showed high inter- and intra- individual variabilities in the trough concentrations of imipenem and meropenem, thus confirming the importance and necessity of TDM. For neonatal patients, imipenem 20 mg/kg, q12h (40mg/kg/day) failed to produce significant therapeutic effects, and either the dose or the frequency was adjusted to achieve 60mg/kg/day or above to maintain the trough concentration required for the curative effect. The low operational cost and good separation efficiency would help implement this assay for the routine therapeutic drug monitoring of imipenem and meropenem in hospitals.

Single-Center Pharmacokinetic Study and Simulation of a Low Meropenem Concentration in Brain-Dead Organ Donors

Meropenem is an ultrabroad-spectrum antibiotic of the carbapenem family. In brain-dead organ donors, administration of standard meropenem dosages does not reach therapeutic levels. Our objectives were to determine the plasma concentration of meropenem after the administration of standard meropenem dose and to estimate an improved dosage regimen for these patients. One gram of meropenem was administered as a 1-h infusion every 8 h for 1 to 3 days, and blood samples were collected. The plasma concentration of meropenem was measured and subjected to pharmacokinetic analysis. Simcyp simulation was performed to predict the optimum plasma levels and dosage based on the patients' individual pharmacokinetic parameters. The maximum plasma concentration of meropenem was 3.29 μg/ml, which was lower than four times the MIC of 8 μg/ml. Although the mean creatinine clearance of patients was moderately low (67.5 ml/min), the apparent volume of distribution at steady state (Vss) and time-averaged total body clearance (CL) of meropenem were markedly elevated (4.97 liters/kg and 2.06 liters/h/kg, respectively), owing to massive fluid loading to decrease the high sodium levels and to treat shock or dehydration. The simulation revealed that dose and infusion time of meropenem should be increased based on patients' Vss and CL, and a loading dose is recommended to reach rapidly the target concentration. In conclusion, a standard meropenem regimen is insufficient to achieve optimal drug levels in brain-dead patients, and an increase in dose and extended or continuous infusion with intravenous bolus administration of a loading dose are recommended for these patients.

The exploration of population pharmacokinetic model for meropenem in augmented renal clearance and investigation of optimum setting of dose

In recent years, augmented renal clearance (ARC), in which renal function is excessively enhanced, has been reported, and its influence on β-lactam antibiotics has been investigated. In this study, we aimed to determine the optimum population pharmacokinetic model of meropenem in patients with sepsis with ARC, and evaluated dosing regimens based on renal function. Seventeen subjects (6 with ARC and 11 without) were enrolled in this study. Predicted meropenem concentrations were evaluated for bias and precision using the Bland-Altman method. To examine the dosing regimen, Monte Carlo simulation was performed to calculate the cumulative fraction of response (CFR). In patients with ARC, the bias (average of the predicted value and measured value residuals) of models constructed by Crandon et al. (2011), Roberts et al. (2009), and Jaruratanasirikul et al. (2015) were 5.96 μg/mL, 10.91 μg/mL, and 4.41 μg/mL, respectively. Following 2 g meropenem every 8 h (180 min infusion), CFR ≥ 90%, a criterion of success for empirical therapy, was achieved, even with creatinine clearance of 130-250 mL/min. For patients with sepsis and ARC, the model of Jaruratanasirikul et al. showed the highest degree of accuracy and precision and confirmed the efficacy of the meropenem dosing regimen in this patient population.

Personalised beta-lactam therapy: basic principles and practical approach

Bacterial infections are potentially life-threatening diseases requiring effective antibiotic treatment right from the outset to achieve a favourable prognosis. Therapeutic success depends on the susceptibility of the bacterial pathogen, determined by the minimum inhibitory concentration (MIC), and the concentration of the antibiotic at the focus of infection, which is influenced by drug metabolism and pharmacokinetic (PK) factors. Beta-lactams are time-dependent antibiotics. Bacterial killing correlates with the duration of the drug concentration above the MIC of the pathogen. Critical illness is associated with major PK changes. This may lead to unexpected drug concentrations and unpredictable dose requirements differing significantly from standard dosages. Emerging dosing strategies are therefore based on PK/pharmacodynamic (PD) principles. Therapeutic drug monitoring (TDM) is increasingly playing a key role in antibiotic treatment optimisation in general and in beta-lactam therapy, in particular, notably in severely ill patients. Furthermore, evidence of the superiority of continuous beta-lactam infusions over shorter administration regimens is growing. Target drug concentrations have to be defined, considering MIC values especially in pathogens with limited susceptibility. For reliable TDM results, correct pre-analytical sample handling is indispensable. Personalised, TDM-guided therapy currently offers the most promising approach to assuring that beta-lactam treatment is effective, especially in critically ill patients.

Pharmacokinetics of meropenem in children receiving continuous renal replacement therapy: Validation of clinical trial simulations

Meropenem is frequently prescribed in critically ill children receiving continuous renal replacement therapy (CRRT). We previously used clinical trial simulations to evaluate dosing regimens of meropenem in this population and reported that a dose of 20 mg/kg every 12 hours optimizes target attainment. Meropenem pharmacokinetics were investigated in this prospective, open-label study to validate our previous in silico predictions. Seven patients received meropenem (13.8-22 mg/kg) administered intravenously every 12 hours as part of standard care. A mean dose of 18.6 mg/kg of meropenem was administered, resulting in a mean peak concentration of 80.1 μg/mL. Meropenem volume of distribution was 0.35 ± 0.085 L/kg. CRRT clearance was 40.2 ± 6.6 mL/(min · 1.73 m(2) ) and accounted for 63.4% of the total clearance of 74.8 ± 36.9 mL/(min · 1.73 m(2) ). Simulations demonstrated that a dose of 20 mg/kg every 12 hours resulted in a time above the minimum inhibitory concentration (%fT > MIC) of 100% in 5 out of 7 subjects, with a %fT > MIC of 93% and 43% in the remaining 2 subjects. We conclude that CRRT contributed significantly to the total clearance of meropenem. A dosing regimen of 20 mg/kg achieved good target attainment in critically ill children receiving CRRT, which is consistent with our previously published in silico predictions.

Development and validation of a UHPLC diode array detector method for meropenem quantification in human plasma

OBJECTIVES

Meropenem is a β-lactam antibiotic frequently used to treat serious infections in intensive care unit patients. The main objective was to develop and validate a sensitive and specific ultra high performance liquid chromatography method with photodiode array detection for the quantitation of meropenem in human plasma. The applicability of the method for meropenem monitoring was also examined.

DESIGN AND METHODS

The validation of the method was performed following the FDA's guidelines for bioanalytical methods. In parallel, the method was applied for monitoring meropenem in forty plasma samples from ten critically ill patients treated intravenously at a total dose of 1 g. Drug levels were measured in each patient at 0 h, 2 h, 4 h and 8 h after meropenem infusion.

RESULTS

With this method, intraday and day-to-day variation was below 10%; intraday and day-to-day accuracy was between 94% and 114%; the limit of quantification was 0.5 μg/mL and recovery was above 70%. The method was successfully applied to quantitate meropenem concentrations and the results showed significant pharmacokinetic interindividual variability. Of special interest is that 50% of treated patients had meropenem plasma levels below the minimum inhibitory concentration at 8h after the start of infusion, which was strongly related to creatinine clearance >60 mL/min.

CONCLUSIONS

The method meets the requirements to be applied for meropenem concentration measurements in pharmacokinetics studies and clinical routine. The results suggest the need for therapeutic drug monitoring of meropenem in treated critically-ill patients.

Determination of meropenem in bacterial media by LC-MS/MS

To support the development of a dynamic in vitro human pharmacokinetic/pharmacodynamic simulation model for biofilm-mediated infections and study stability of meropenem, an LC-MS/MS method for the determination of meropenem in Luria Bertani (LB) media was developed and validated in an API2000 LC-MS/MS system. A partial validation was also performed in M9 media. Sample aliquots of 100μL (or 25μL for M9 media) were mixed with the internal standard (IS) ceftazidime and filtered. The filtrate was directly injected onto a C8 column eluted with ammonium formate (10mM, pH 4) and acetonitrile (0.1% formic acid) in a gradient mode. ESI(+) and MRM with ion pair m/z 384→68 for meropenem and m/z 547→468 for the IS were used for quantification. The calibration curve concentration range was 50 to 25,000ng/mL. The recovery was over 98%. In LB media, significant signal suppression was observed throughout the time period of detection when compared with mobile phase solvents, but the matrix effect was compensated well with the IS. In M9 media, much less signal suppression was observed. The method is simple, fast, and reliable. Using the method, stability of meropenem in LB and M9 media were tested. No significant degradation was observed for at least 8h in both LB media (37°C) and M9 media (30°C), but more than 15% degradation was observed overnight (∼20h). The method was transferred to an API5000 LC-MS/MS system using meropenem-d6 as the IS.

Ultraviolet spectrophotometry (dual wavelength and chemometric) and high performance liquid chromatography for simultaneous estimation of meropenem and sulbactam sodium in pharmaceutical dosage form

UV spectrophotometric and high performance liquid chromatography (HPLC) methods were developed for simultaneous determination of meropenem (MERM) and sulbactam sodium (SB) in injection. UV spectrophotometric methods were developed using 0.1N sodium hydroxide as solvent. The Beer's plot for dual wavelength method was linear in the range of 4-24 μg mL(-1) and 2-12 μg mL(-1) for MERM and SB, respectively. The percent recoveries were found to be 98.52±1.23% for MERM and 101.45±1.1% for SB. Chemometrics assisted UV spectrophotometry was performed using Partial Least Square (PLS) analysis model and Principal Component Regression (PCR) analysis model. The % recoveries of the MERM were found to be 100.61±0.06% and 101.31±0.12% using PLS and PCR, respectively. The % recoveries of the SB were found to be 98.29±0.09% and 97.61±0.13% using PLS and PCR, respectively. Chromatography was performed on Hypersil BDS C18 column using methanol:acetonitrile:water (10:20:70 v/v/v) as mobile phase. The retention times of MERM and SB were found to be 2.9 min and 2.25 min, respectively. Developed HPLC method was found to be linear in the range of 50-250 μg mL(-1) and 25-125 μg mL(-1) for MERM and SB, respectively. The % recoveries were found to be 98.85±0.25% and 98.63±0.34% for MERM and SB, respectively. The developed analytical methods did not show any interference of the excipients when applied to pharmaceutical dosage form.

Prostatic penetration of meropenem in humans, and dosage considerations for prostatitis based on a site-specific pharmacokinetic/pharmacodynamic evaluation

The aims of this study were to investigate the penetration of meropenem (MER) into human prostate tissue and to assess MER regimens for prostatitis by performing a site-specific pharmacokinetic/pharmacodynamic evaluation. Patients with prostatic hypertrophy (n=49) prophylactically received a 0.5-h infusion of MER (250 mg or 500 mg) before transurethral resection of the prostate. MER concentrations in plasma (0.5-5h) and prostate tissue (0.5-1.5h) were measured chromatographically. Concentration data were analysed pharmacokinetically with a three-compartment model and were used to estimate the drug exposure time above the minimum inhibitory concentration for bacteria (T>MIC, % of 24h) in prostate tissue, an indicator for antibacterial effects at the site of action. The prostate tissue/plasma ratio was 16.6% for the maximum drug concentration and 17.7% for the area under the drug concentration-time curve, irrespective of the dose. Against MIC distributions for clinical isolates of Escherichia coli, Klebsiella spp. and Proteus spp., 500 mg once daily achieved a >90% probability of attaining the bacteriostatic target (20% T>MIC) in prostate tissue, and 500 mg twice daily achieved a >90% probability of attaining the bactericidal target (40% T>MIC) in prostate tissue. However, against the Pseudomonas aeruginosa isolates, none of the tested regimens achieved a >90% probability of attaining the bacteriostatic or bactericidal targets.

Penetration of meropenem into human pancreatic juice

This study examined the penetration of meropenem into pancreatic juice in patients who had undergone hepato-biliary-pancreatic surgery. The patients received a 0.5-h infusion of 500 mg meropenem. The observed maximum concentration (mean ± standard deviation, n = 5) was 39.1 ± 11.2 μg/ml at 0.5 h in plasma and 2.12 ± 0.73 μg/ml at 1.10 ± 0.14 h in pancreatic juice. The pancreatic juice/plasma ratio was 0.06 ± 0.02. The area under the drug concentration-time curve was 73.0 ± 37.5 μg•h/ml in plasma and 4.24 ± 2.77 μg•h/ml in pancreatic juice. The pancreatic juice/plasma ratio was 0.06 ± 0.01. The mean drug-exposure times above 0.125 μg/ml and 0.25 μg/ml (the minimum inhibitory concentrations (MIC) for common pathogens) in pancreatic juice were 99.4% and 87.3%, respectively, for 500 mg meropenem 3 times daily. This commonly used regimen for pancreatitis achieved the drug-exposure time target (40% of the time above the MIC) at the action site, despite the low penetrability of meropenem.

Efficacy of intratracheal instillation of a meropenem/perfluorochemical suspension in acute lung injury

Perfluorochemical (PFC) is theoretically a good vehicle for delivering biological agents to the lungs. This study was designed to investigate the efficacy of intratracheal (IT) instillation of meropenem using PFC liquid as a vehicle in a piglet model of acute lung injury (ALI). Eighteen piglets were injured with lung lavages to induce ALI, and randomly assigned to intravenous (IV) infusion or IT instillation groups, the latter using either PFC or normal saline (NS) as a delivery vehicle for meropenem. Blood samples were obtained at 0, 15, 30, and 60 min, and then hourly for 6 hr. Sera and extracts of lung tissues were assayed for meropenem content using high-performance liquid chromatography. We found that the IV group had significantly higher serum concentrations of meropenem during the first hour after dosing (P < 0.05). There was no significant difference between IT-PFC and IT-NS groups regarding changes in serum meropenem concentrations during the experimental period. Meropenem content in lung tissue was highest in the IT-PFC group, lower in the IT-NS group, and undetectable in the IV group (P < 0.05). The IT-NS group had the highest peak inspiratory pressure (P < 0.05), but there were no significant differences in other cardiopulmonary parameters among the three groups studied. In conclusion, meropenem can be safely administered to injured lungs by IT instillation in a meropenem/PFC suspension. Using PFC liquid as an IT vehicle to carry meropenem provides better pulmonary drug depositions than IV injection or IT instillation with NS in ALI.

Population pharmacokinetic analysis of meropenem in Japanese adult patients

WHAT IS KNOWN AND OBJECTIVE

Meropenem is frequently employed as an empirical treatment for serious infections, but there has been no report on its population pharmacokinetic parameters for Japanese patients. Our aim is to undertake a population pharmacokinetic analysis of meropenem using non-linear mixed effects model (NONMEM).

METHODS

Data from 68 patients were analysed via NONMEM with the first-order method. The participants' covariates, including gender, age, actual body weight, serum creatinine, serum albumin, serum total protein and creatinine clearance, were analyzed by the forward inclusion and backward elimination method to identify their potential influence on meropenem pharmacokinetics. The adequacy of the constructed model was assessed by goodness-of-fit plots and the precision of the parameter estimated at each step of the model development. To assess the robustness of the estimated parameter, bootstrap analysis was performed.

RESULTS AND DISCUSSION

The data were best described by a one-compartment model. The serum creatinine values modified by the below normal limit in our hospital (mSCR) were an influential covariate for clearance (CL): CL (L/h) = 11·1 × (mSCR/0·7)(-1). The volume of distribution was estimated as 33·6 L. The coefficient of variation of the inter-individual variability of CL and the residual variability were 52·1% and 0·827% μg/mL, respectively. A comparison of the population pharmacokinetic parameters of meropenem in the final model estimated in NONMEM with original data, and 1000 bootstrap samples shows that both sets of estimates were comparable, thereby indicating the robustness of the proposed model.

WHAT IS NEW AND CONCLUSION

A population pharmacokinetic model that satisfactorily described the disposition and variability of meropenem in our Japanese population is described. NONMEM analysis showed that the clearance of meropenem depended on modified serum creatinine. The results of this study should help Japanese patients on meropenem by improving the prediction accuracy of dosing using the Bayesian method.

A liquid chromatography assay for a quantification of doripenem, ertapenem, imipenem, meropenem concentrations in human plasma: application to a clinical pharmacokinetic study

A simple chromatographic assay based on ultra high performance liquid chromatography with ultraviolet detection at 295 nm is proposed to determinate simultaneously human plasma concentrations of imipenem, doripenem, meropenem and ertapenem. After deproteinization by acetonitrile, carbapenems are separated on a PentaFluoroPhenyl column with a binary gradient elution. This method is specific, accurate, precise (the intra-day and inter-day imprecision and inaccuracy are lower than 15%), sensitive (the limit of quantitation is equal to 0.50 mg/L for imipenem, doripenem, ertapenem, meropenem) and not time consuming (run time=7 min). An application of this method to measure ertapenem plasma concentrations in burn patients is presented.

Population pharmacokinetics and pharmacodynamics of meropenem in Japanese pediatric patients

The aims of this study were to develop a population pharmacokinetic model for meropenem in Japanese pediatric patients, and to use this model to assess the pharmacodynamics of meropenem regimens against common bacterial populations. Pharmacokinetic data were pooled from nine separate studies (229 plasma samples and 61 urine samples from 40 infected children), modeled using the NONMEM program, and used for a pharmacodynamic simulation to estimate the probabilities of attaining the bactericidal target (40% of the time above the MIC for the bacterium). In the final population pharmacokinetic model, body weight (BW, kg) was the most significant covariate: Cl(r) (l/h) = 0.254 x BW, Cl(nr) (l/h) = 3.45, V (c) (l) = 0.272 x BW, Q (l/h) = 1.65, and V (p) (l) = 0.228 x BW, where Cl(r) and Cl(nr) are the renal and non-renal clearances, V (p) and V (c) are the volumes of distribution of the central and peripheral compartments, and Q is the intercompartmental (central-peripheral) clearance. In most typical patients (BW = 10, 20, and 30 kg), the approved regimens of 10-40 mg/kg, three times a day (0.5-h infusions), achieved a target attainment probability of >80% against Escherichia coli, Streptococcus pneumoniae, methicillin-susceptible Staphylococcus aureus, Haemophilus influenzae, and Pseudomonas aeruginosa isolates. The results of this study provide a better understanding of the pharmacokinetics and pharmacodynamics of meropenem in Japanese pediatric patients.

[Personalized optimization of beta-lactam regimens based on studies of the pharmacokinetics-pharmacodynamics at the target sites]

Beta-lactam antibiotics are used for the treatment of various infections such as intra-abdominal infections and bacterial meningitis. Beta-lactams act at the infection site and their antibacterial effects relate to the exposure time during which the drug concentrations remain above the minimum inhibitory concentration for bacteria (T>MIC). The penetration into and exposure of beta-lactams at the target sites, such as the abdominal cavity and the cerebrospinal space, are therefore considered to be good indicators of their efficacies. However, earlier clinical research has focused primary on the drug concentrations in plasma. We therefore examined the pharmacokinetics-pharmacodynamics of beta-lactams at the target sites, and analyzed them using a population pharmacokinetic modeling and statistical technique called Monte Carlo simulation. This review summarizes our recent findings on carbapenem and cephem antibiotics in peritoneal and cerebrospinal fluids, and our new approaches to personalize and optimize beta-lactam dosing regimens based on their site-specific pharmacokinetic-pharmacodynamic profiles.

Development of breakpoints of carbapenems for intraabdominal infections based on pharmacokinetics and pharmacodynamics in peritoneal fluid

This study aimed to develop breakpoints of carbapenems for intraabdominal infections, based on pharmacokinetics (PK) and pharmacodynamics (PD) at the target site. Imipenem, meropenem, and doripenem were each administered to 8-11 patients before abdominal surgery, and venous blood and peritoneal fluid samples were obtained. The drug concentrations in plasma and peritoneal fluid were determined and analyzed using population pharmacokinetic modeling. Using the pharmacokinetic model parameters, a Monte Carlo simulation was performed to estimate the probabilities of attaining the bacteriostatic and bactericidal targets (20% and 40% of the time above the minimum inhibitory concentration [MIC], respectively) in peritoneal fluid. The bacteriostatic and bactericidal breakpoints were defined as the highest MIC values at which the bacteriostatic and bactericidal probabilities in peritoneal fluid were 80% or more. The breakpoints for the minimum and maximum approved dosages of each drug were identical for imipenem, meropenem, and doripenem, and some of these values varied with dosing interval and infusion time. Site-specific PK-PD-based breakpoints are proposed here for the first time, and should help us to select appropriate carbapenem regimens for intraabdominal infections.

Real-time therapeutic drug monitoring of cefozopran in plasma using high-performance liquid chromatography with ultraviolet detection

A simple, rapid, and precise HPLC method using ultrafiltration to remove plasma protein was developed to determine cefozopran concentrations in human plasma for real-time therapeutic drug monitoring. Plasma was separated by centrifugation at 4 degrees C from blood collected in heparinized vacuum tubes. Cefozopran and an internal standard were detected by ultraviolet absorbances at 235 nm with no interfering plasma peak. The calibration curve of cefozopran in human plasma was linear from 0.2 to 200 microg/ml. The limit of detection was 0.05 microg/ml. The assay was applied to febrile neutropenia patients in a clinical setting.