Development and implementation of an analytical procedure for the quantification of natural and synthetic steroid hormones in whole surface waters

Summary recommendations on "Analytical methods for substances in the Watch List under the Water Framework Directive"

The Watch List (WL) is a monitoring program under the European Water Framework Directive (WFD) to obtain high-quality Union-wide monitoring data on potential water pollutants for which scarce monitoring data or data of insufficient quality are available. The main purpose of the WL data collection is to determine if the substances pose a risk to the aquatic environment at EU level and subsequently to decide whether a threshold, the Environmental Quality Standards (EQS) should be set for them and, potentially to be listed as priority substance in the WFD. The first WL was established in 2015 and contained 10 individual or groups of substances while the 4th WL was launched in 2022. The results of monitoring the substances of the first WL showed that some countries had difficulties to reach an analytical Limit of Quantification (LOQ) below or equal to the Predicted No-Effect Concentrations (PNEC) or EQS. The Joint Research Centre (JRC) of the European Commission (EC) organised a series of workshops to support the EU Member States (MS) and their activities under the WFD. Sharing the knowledge among the Member States on the analytical methods is important to deliver good data quality. The outcome and the discussion engaged with the experts are described in this paper, and in addition a literature review of the most important publications on the analysis of 17-alpha-ethinylestradiol (EE2), amoxicillin, ciprofloxacin, metaflumizone, fipronil, metformin, and guanylurea from the last years is presented.

Deep eutectic solvents with solid supports used in microextraction processes applied for endocrine-disrupting chemicals

The determination of endocrine-disrupting chemicals (EDCs) has become one of the biggest challenges in Analytical Chemistry. Due to the low concentration of these compounds in different kinds of samples, it becomes necessary to employ efficient sample preparation methods and sensitive measurement techniques to achieve low limits of detection. This issue becomes even more struggling when the principles of the Green Analytical Chemistry are added to the equation, since finding an efficient sample preparation method with low damaging properties for health and environment may become laborious. Recently, deep eutectic solvents (DESs) have been proposed as the most promising green kind of solvents, but also with excellent analytical properties due to the possibility of custom preparation with different components to modify their polarity, viscosity or aromaticity among others. However, conventional extraction techniques using DESs as extraction solvents may not be enough to overcome challenges in analysing trace levels of EDCs. In this sense, combination of DESs with solid supports could be seen as a potential solution to this issue allowing, in different ways, to determine lower concentrations of EDCs. In that aim, the main purpose of this review is the study of the different strategies with solid supports used along with DESs to perform the determination of EDCs, comparing their advantages and drawbacks against conventional DES-based extraction methods.

Effects of mifepristone, a model compound with anti-progestogenic activity, on the development of African clawed frog (Xenopus laevis)

The objective of this study was to assess the effects of a model substance with anti-progestogenic activity on development of African clawed frog (Xenopus laevis) from tadpole to juvenile stage. Mifepristone, a synthetic progesterone receptor-blocking steroid hormone used in medicine as an abortifacient, was chosen as a model compound with anti-progestogenic activity. In the experiment, African clawed frog tadpoles were exposed to mifepristone at three concentrations (2, 21, and 215 ng L-1). A control group was exposed to dimethyl sulfoxide (DMSO; 0.001 %). The experiment started when tadpoles reached stages 47-48 according to Nieuwkoop and Faber (NF; 1994) and continued until stage NF 66, when metamorphosis was complete. Exposure to mifepristone had no significant effect on the rate of tadpole development, occurrence of morphological anomalies, weight, body length, or sex ratio. Mortality was within an acceptable range of 0-3.6 % throughout the test and did not differ among the groups. Histopathological examination of the gonads and thyroid gland revealed no significant changes. Therefore, we can conclude that mifepristone had no negative effect on development of the African clawed frog up to juvenile stage. Nevertheless, at the highest tested mifepristone concentration (215 ng L-1), gene expression analysis revealed up-regulation of mRNA expression of nuclear progesterone receptor (npr), membrane progesterone receptor (mpr), estrogen receptor beta (esrβ), and luteinizing hormone (lh) in the brain-pituitary complex of exposed frogs at stage NF 66. Higher mRNA expression of npr was also found in frogs exposed to 22 ng L-1 mifepristone compared to the solvent control. These findings confirmed the anti-progestogenic activity of mifepristone in frogs because the up-regulation of progesterone receptors occurs if progesterone availability in the body is reduced. All the observed changes in combination may have negative consequences for reproduction and reproductive behavior later in life.

Ultrasound-Assisted Extraction, Followed by Gas Chromatography-Mass Spectrometry for the Simultaneous Quantification of Ethinyl Estradiol and Drospirenone in Contraceptive Formulations

Contraceptive tablets typically contain a combination of two synthetic versions of an estrogen and a progestogen, which work together to inhibit the ovulation process. An accurate and precise quantification of these components is essential for contraceptive producers. In this study, we have developed the first gas chromatography-mass spectrometry (GC-MS) method for the simultaneous quantification of 17α-ethinyl estradiol (EE) and drospirenone (DP) in contraceptive formulations. Under the final working conditions, analytes were extracted from the solid by ultrasound-assisted extraction (15 min) in methanol. The resulting suspension was diluted in ethyl acetate, subjected to centrifugation and, finally, the supernatant was directly injected into the GC-MS system. No derivatization reagents were utilized. To correct for instrumental variations, calibration was performed using the internal standard method, with cholesterol as the internal standard. A good linearity was achieved throughout the calibration range for both EE (3-12 µg mL^-1) and DP (300-1200 µg mL^-1), with R² values exceeding 0.99. Trueness, assessed in terms of percentages of recovery, was also found to be satisfactory for both analytes, with recovery rates of 106 ± 8% for EE and 93 ± 9% for DP. Furthermore, intra-day and inter-day precision studies yielded relative standard deviation values below 6% for both analytes. In terms of sensitivity, the instrumental limits of detection were 0.25 µg mL^-1 for EE and 6.6 µg mL^-1 for DP, and the instrumental limits of quantification 0.82 µg mL^-1 for EE and 22 µg mL^-1 for DP. The method was successfully applied to the analysis of contraceptive tablets from three different pharmaceutical companies. No differences were observed between the measured and the declared amount of active principle per tablet, demonstrating the applicability of the procedure. In addition, a stability study conducted on both the standards and sample extracts demonstrated that they can be stored at room temperature for a minimum period of seven days.

A robust multi-residue method for the monitoring of 25 endocrine disruptors at ultra-trace levels in surface waters by SPE-LC-MS/MS

Estrogenic endocrine disruptors are one of the biggest ecotoxicological threats in water that pose a significant ecological burden and health-risk for humans due to their high biological activity and proven additive effects. Therefore, we have developed and validated the most comprehensive and ultra-sensitive analytical method published to date, for reliable quantification of 25 high-risk endocrine disruptors at their ecologically relevant concentrations: naturally excreted hormones (estradiol, estrone, estriol, testosterone, corticosterone, and progesterone), synthetic hormones used for contraception and menopausal symptoms (ethinylestradiol, drospirenone, chlormadinone acetate, norgestrel, gestodene, tibolone, norethindrone, dienogest, and cyproterone) and bisphenols (BPS, BPA, BPF, BPE, BPAF, BPB, BPC, and BPZ). It is based on a solid-phase extraction of water samples, followed by a robust dansyl chloride derivatization with detection by liquid chromatography-tandem mass spectrometry with a single sample preparation and two analytical methods using the same analytical column and mobile phases. The achieved limits of quantitation are in the sub-ng L^-1 range, and detection limits as low as 0.02 ng L^-1, meeting the newest proposal for environmental quality standards (EQS) by the EU water framework directive for estradiol and ethinylestradiol. The method was extensively validated and applied to seven representative Slovenian water samples, where we detected 21 out of 25 analytes; 13 were quantified in at least one sample. Estrone and progesterone were quantified in all samples, reaching levels up to 50 ng L^-1; ethinylestradiol was higher than the current EQS (0.035 ng L^-1) in three samples, and estradiol was above its EQS (0.4 ng L^-1) in one sample, proving the method's applicability and the necessity for monitoring these pollutants.

Validation of an isotope dilution mass spectrometry (IDMS) measurement procedure for the reliable quantification of steroid hormones in waters

Reliable data are compulsory to efficiently monitor pollutants in aquatic environments, particularly steroid hormones that can exert harmful effects at challenging analytical levels below the ng L^-1. An isotope dilution two-step solid-phase extraction followed by an ultra-performance liquid chromatography separation coupled to tandem mass spectrometry (UPLC-MS/MS) detection method was validated for the quantification of 21 steroid hormones (androgens, estrogens, glucocorticoids, and progestogens) in whole waters. To achieve a realistic and robust assessment of the performances of this method, the validation procedure was conducted using several water samples representative of its intended application. These samples were characterized in terms of concentration of ionic constituents, suspended particulate matter (SPM), and dissolved organic carbon contents (DOC). For estrogens that are part of the European Water Framework Directive Watchlist (17beta-estradiol and estrone), the performances met the European requirements (decision 2015/495/EU) in terms of limit of quantification (LQ) and measurement uncertainty. For 17alpha-ethinylestradiol, the challenging LQ of 0.035 ng L^-1 was reached. More generally, for 15 compounds out of 21, the accuracy, evaluated in intermediate precision conditions at concentrations ranging between 0.1 and 10 ng L^-1, was found to be within a 35% tolerance. The evaluation of the measurement uncertainty was realized following the Guide to the expression of Uncertainty in Measurement. Finally, a water monitoring survey demonstrated the suitability of the method and pointed out the contamination of Belgium rivers by five estrogens (17alpha-ethinylestradiol, estriol, 17alpha-estradiol, 17beta-estradiol, and estrone) and three glucocorticoids (betamethasone, cortisol, and cortisone) which have been up to now poorly documented in European rivers.

Simultaneous trace determination of three natural estrogens and their sulfate and glucuronide conjugates in municipal waste and river water samples with UPLC-MS/MS

Analytical method for three natural estrogens (NEs) and their sulfate and glucuronide conjugates in waste and river waters using solid-phase extraction (SPE) coupled with ultra-performance liquid chromatography tandem mass spectrometry (UPLC-MS/MS) has been available, but problems including poor recovery exist. In order to solve these, some optimizations have been performed in this work. For sample preparation, both rinse and elution solutions were optimized, in which 6 mL of MeOH/water (1:9, v/v), MeOH/Ace/water (10:2:88, v/v/v), and MeOH/NH₄OH/water (10:2:88, v/v/v) were determined as the rinse solution, while 6 mL of 2.0% NH₄OH/MeOH was determined as the elution solution for conjugated NEs (C-NEs). For mobile phase, addition of NH₄F could obviously enhance the signal response of the nine target compounds, and the optimized addition concentration was 0.5 mmol/L. The developed efficient method was validated and showed excellent linearity for each target compound (R² > 0.998), low limit of quantifications (LOQs, 0.07-1.29 ng/L) in four different water matrices, and excellent recovery efficiencies of 81.0-116.1% in influent, effluent, ultra-pure, and river water samples with low relative standard deviations (RSDs, 0.6-13.6%). The optimized method was successfully applied to influent, effluent, and Pearl River water, among which three NEs were all detected, while five C-NEs were found in the influent, three C-NEs were detected in the effluent, and two C-NEs were found in the Pearl River water, indicating the wide distribution of NEs and C-NEs in different water environments. This work provided a reliable and efficient analytical method for simultaneous trace determination of NEs and C-NEs, which had satisfactory absolute recoveries with low RSDs, low LOQs, and time-saving for both analysis and nitrogen drying.

Recent Trends in Multiclass Analysis of Emerging Endocrine Disrupting Contaminants (EDCs) in Drinking Water

Ingestion of water is a major route of human exposure to environmental contaminants. There have been numerous studies exploring the different compounds present in drinking water, with recent attention drawn to a new class of emerging contaminants: endocrine-disrupting compounds (EDCs). EDCs encompass a broad range of physio-chemically diverse compounds; from naturally occurring to manmade. Environmentally, EDCs are found as mixtures containing multiple classes at trace amounts. Human exposure to EDCs, even at low concentrations, is known to lead to adverse health effects. Therefore, the ability to evaluate EDC contamination with a high degree of sensitivity and accuracy is of the utmost importance. This review includes (i) discussion on the perceived and actual risks associated with EDC exposure (ii) regulatory actions that look to limit EDC contamination (iii) analytical methods, including sample preparation, instrumentation and bioassays that have been advanced and employed for multiclass EDC identification and quantitation.

Overcoming matrix effects in quantitative liquid chromatography-mass spectrometry analysis of steroid hormones in surface waters

RATIONALE

Accurate and reliable measurements are mandatory in the field of environmental monitoring. Matrix effects are often depicted as the Achilles' heel of liquid chromatography-mass spectrometry analysis since they may be prejudicial for analytical performances such as detection capability and accuracy, if not documented or compensated. Here a methodology for the evaluation and compensation of matrix effects is described.

METHODS

Natural and synthetic representative water samples were used for the evaluation of matrix effects with the post-extraction addition technique. Samples were analysed using ultra-performance liquid chromatography separation coupled to tandem mass spectrometry and electrospray ionization. Isotopic dilution was investigated as a way to allow compensation of signal alteration and therefore satisfactory quantification. When this approach was not possible, a methodology was conducted for choosing the most appropriate internal standard.

RESULTS

The matrix effects were dependent on both matrix composition and nature of analyte. They ranged from total signal suppression to signal enhancement of +27% but were independent of compound concentration. The correction of matrix effects by internal standards was satisfactory, particularly for compounds benefiting from isotope dilution leading to acceptable quantification performances.

CONCLUSIONS

Even if no exhaustive or agreed criteria exist for the final interpretation of matrix effects, this study highlights the interest in isotope dilution for reducing their inherent prejudicial effects in quantification and the need to conduct this type of study for representative matrices. Moreover, a methodological approach is proposed for choosing the most appropriate available internal standard when isotope dilution is not possible.

Assessment of automated off-line solid-phase extraction LC-MS/MS to monitor EPA priority endocrine disruptors in tap water, surface water, and wastewater

EPA method 539.1 recently introduced an expanded list of priority endocrine-disrupting compounds (EDCs), some of which were also included in the Unregulated Contaminant Monitoring Rule 3 (UCMR3). Though standardized methods are available for drinking water, analysis of steroid hormones and bisphenol A (BPA) at the ultra-trace level remains challenging. This study set out to evaluate the suitability of automated off-line solid-phase extraction (SPE) liquid chromatography tandem mass spectrometry (UHPLC-MS/MS) for the determination of EPA-priority EDCs in environmental water matrixes (tap water, surface water, and wastewater influents and effluents). The target molecules included 14 steroid hormones (altrenogest, androstenedione, equilenin, equilin, α-estradiol, β-estradiol, estriol, estrone, ethinylestradiol, levonorgestrel, medroxyprogesterone, norethindrone, progesterone, testosterone) and BPA. Factors that may influence the analytical performance were assessed. This involved, for instance, testing combinations of SPE materials from different brands and protocol variations. Several materials presented absolute extraction efficiencies in acceptable ranges. Initial sample pH, nature of reconstitution medium, and mobile phase salt concentration were among the potential factors affecting analyte signal. Storage conditions (different preservative agents) possibly exerted the strongest influence, in agreement with the literature. Limits of detection were in the range of 0.03-0.5 ng/L in drinking water, 0.1-0.5 ng/L in surface water, and 0.16-1 ng/L in wastewater. Method validation also involved testing linearity, accuracy, and precision in reagent water and matrix-matched extracted calibrants. The method was applied to field-collected water samples in Eastern Canada. Summed EDC concentrations remained low in tap water (<LOQ-0.92 ng/L), while higher detection frequencies and contamination levels were reported in riverine surface waters (2.6-37 ng/L) and municipal wastewaters (10-424 ng/L).