Preparation and characterization of polymer composite multilayers on SiO2

Ordered Porous Layer Interferometry for Dynamic Observation of Non-Specific Adsorption Induced by 1-Ethyl-3-(3-(dimethylamino)propyl) Carbodiimide

Nonspecific adsorption (NSA) seems to be an impregnable obstacle to the progress of the biomedical, diagnostic, microelectronic, and material fields. The reaction path of bioconjugation can alter the surface charge distribution on products and the interaction of bioconjugates, an ignored factor causing NSA. We monitored exacerbated NSA introduced by a 1-ethyl-3-(3-(dimethylamino)propyl) carbodiimide (EDC) addition reaction, which cannot be resistant to bovine serum albumin (BSA) or polyethylene glycol (PEG) antifouling coating and Tween-20. And the negative effects can be minimized by adding as low as 7.5 × 10-6 M N-hydroxysulfosuccinimide (sulfo-NHS). We applied ordered porous layer interferometry (OPLI) to sensitively evaluate the NSA that is difficult to measure on individual particles. Using the silica colloidal crystal (SCC) film with Fabry-Perot fringes as in situ and real-time monitoring for the NSA, we optimized the surface chemistry to yield a conjugate surface without variational charge distribution. In this work, we propose a novel approach from the perspective of the reaction pathway to minimize the NSA of solely EDC-induced chemistry.

Antibacterial and anti-inflammatory drug delivery properties on cotton fabric using betamethasone-loaded mesoporous silica particles stabilized with chitosan and silicone softener

In this study, mesoporous silica particles with a hexagonal structure (SBA-15) were synthesized and modified with (3-aminopropyl) triethoxysilane, and used as a carrier for anti-inflammatory drug, betamethasone sodium phosphate. Drug-loaded silica particles were grafted on the cotton fabric surface using chitosan and polysiloxane reactive softener as a soft and safe fixing agent to develop an antibacterial cotton fabric with drug delivery properties. Cytometry assays revealed that synthesized silica have no cytotoxicity against human peripheral blood mononuclear cells. Accordingly, the produced drug-loaded nanostructures can be applied via different routes, such as wound dressing. Drug delivery profile of the treated fabrics were investigated and compared. The drug release rate followed the conventional Higuchi model. The treated cotton fabrics were tested and evaluated using scanning electron microscope images, bending length, air permeability, washing durability and anti-bacterial properties. It was found that the chitosan-/softener-treated fabrics compounded with drug-loaded silica particles have a good drug delivery performance and exhibited a powerful antibacterial activity against both Escherichia coli and Staphylococcus aureus even after five washing cycles. The produced antibacterial cotton fabric with drug delivery properties could be proposed as a suitable material for many medical and hygienic applications.

Role of poly(diallyldimethylammonium chloride) in selective polishing of polysilicon over silicon dioxide and silicon nitride films

A cationic polymer, poly(diallyldimethylammonium chloride), or PDADMAC (MW ≈ 200,000), at a concentration of 250 ppm was used to enhance polysilicon removal rates (RRs) to ∼600 nm/min while simultaneously suppressing both silicon dioxide and silicon nitride RRs to <1 nm/min, both in the absence or in the presence of ceria or silica abrasives during chemical mechanical polishing (CMP). These results suggest that aqueous abrasive-free solutions of PDADMAC are very attractive candidates for several front-end-of-line (FEOL) CMP processes. Possible mechanisms for the enhancement of poly-Si RR and the suppression of oxide and nitride RRs are proposed on the basis of the RRs, contact angle data on poly-Si films, zeta potentials of polishing pads, polysilicon films, silicon nitride particles, and silica and ceria abrasives, thermogravimetric analysis, and UV-vis spectroscopy data.

Silicon–polymer hybrid materials for drug delivery

Silicon and its oxides are widely used in biomaterials research, tissue engineering and drug delivery. These materials are highly biocompatible, easily surface functionalized, degrade into nontoxic silicic acid and can be processed into various forms such as micro- and nano-particles, monoliths, membranes and micromachined structures. The large surface area of porous forms of silicon and silica (up to 1200 m2/g) permits high drug loadings. The degradation kinetics of silicon- and silica-based materials can be tailored by coating or grafting with polymers. Incorporation of polymers also improves control over drug-release kinetics. The use of stimuli-responsive polymers has enabled environmental stimuli-triggered drug release. Simultaneously, silicon microfabrication techniques have facilitated the development of sophisticated implantable drug-delivery microdevices. This paper reviews the synthesis, novel properties and biomedical applications of silicon–polymer hybrid materials with particular emphasis on drug delivery. The biocompatible and bioresorptive properties of mesoporous silica and porous silicon make these materials attractive candidates for use in biomedical applications. The combination of polymers with silicon-based materials has generated a large range of novel hybrid materials tailored to applications in localized and systemic drug delivery.

Variation of ion-exchange capacity, zeta potential, and ion-transport selectivities with the number of layers in a multilayer polyelectrolyte film

The properties of poly(styrene sulfonate) (PSS)/poly(diallyldimethylammonium chloride) (PDADMAC) films vary dramatically with the number of polyelectrolyte layers deposited. Attenuated total reflectance infrared spectroscopy of (PDADMAC/PSS)n films deposited on a Ge crystal shows that coatings with fewer than 7 PDADMAC/PSS bilayers do not absorb significant amounts of SCN- or Ni(CN)4(2-) but coatings with more than 7 bilayers exhibit an ion-exchange capacity of about 0.5 mol/L of film. Consistent with ion-exchange, Ni(CN)4(2-) is the anion that is predominantly absorbed from equimolar mixtures of SCN- and Ni(CN)4(2-), even though SCN- initially exchanges into the film more rapidly than Ni(CN)4(2-). For silicon-supported PSS/PDADMAC films terminated with PSS, zeta potentials change from negative to positive as the number of adsorbed bilayers increases, presumably because of a high number of anion-exchange sites inside the film. These changes in film properties dramatically affect ion transport through (PSS/PDADMAC)nPSS-coated alumina membranes. The Cl-/SO4(2-) selectivities of these membranes are >30 with (PSS/PDADMAC)4PSS films but only 3 with (PSS/PDADMAC)6PSS films. Trends in zeta potentials and selectivities with increasing numbers of bilayers are consistent with the exponential growth mechanism, where a polycation absorbs throughout the film to create large numbers of anion-exchange sites, and during polyanion deposition, some of the polycation diffuses to the surface of the film to complex with polyanions from solution. Apparently, not all of the charge on the polycation is compensated by the polyanion; therefore, anion-exchange sites remain in the film, and the presence of this positive charge yields decreased Cl-/SO4(2-) selectivity.

Hepatic-targeting microcapsules construction by self-assembly of bioactive galactose-branched polyelectrolyte for controlled drug release system

We describe the construction of hepatic-targeting microcapsules by self-assembly of chemo-enzymatic synthesized poly(vinyl galactose ester-co-methacryloxyethyl trimethylammonium chloride) (PGEDMC) containing galactose branches, which can be specifically recognized by membrane bound galactose receptors (ASGPR), for acyclovir (ACV) controlled release system. Alternate deposition of PGEDMC and poly(sodium 4-styrenesulfonate) (PSS) was carried out on ACV microcrystals. It was revealed that the drug release rate decreases with the increase of coated layer number and a microcapsule-drying treatment would enhance the sustained release effect probably because of a multilayer shrink and tightness during the process. The complete release of ACV yielded a hollow PGEDMC/PSS multilayered network with favorable integrity and nano-thickness by TEM and SEM. The potential targetability of the system was proved in vitro by PNA lectin recognition. Lectin hardly adsorbed on the film where the outmost layer was a polyanion or a polycation without galactose component. Whilst the galactose-containing layer (PGEDMC) was the outmost layer, a significant lectin combination was observed. This technique could provide a promising way to encapsulate and deliver various target substances in biological and pharmaceutical applications.

Graft polymerization of styrene initiated by covalently bonded peroxide groups on silica

The graft polymerization of styrene initiated by immobilized peroxide groups was investigated. Three different types of modification reactions were used to introduce peroxide groups which are directly attached onto the surface of two different silica supports. Silanol groups were chlorinated using thionyl chloride or tetrachlorosilane. In another reaction pathway 1,3,5-benzenetricarbonyl chloride enabled the introduction of free acid chloride residues bonded onto the surface of silica. tert-Butyl hydroperoxide (TBHP) was used to transform the chlorosilyl and the acid chloride groups into peroxide residues. In a further reaction step the covalently bonded peroxides initiated the polymerization of styrene to form grafted polystyrene directly attached onto the silica support. Solid-state 13C CP/MAS NMR spectroscopy, and thermogravimetric and scanning electron microscope measurements enabled a clear structure and property elucidation of the different bonded phases. The highest amount of grafted polystyrene was achieved employing the acid chloride synthesis pathway with silica-gel, whereas modification of spherical silica only led to minor amounts of grafted polymer. The results contribute to the evolving need to understand particle surface modifications and may have positive impact on development of new HPLC stationary phases for improved elutant resolution.