Immobilization of fluorescein isothiocyanate on magnetic polymeric nanoparticle using chitosan as spacer

Multi-stimuli-responsive pectin-coated dendritic mesoporous silica nanoparticles with Eugenol as a sustained release nanocarrier for the control of tomato bacterial wilt

BACKGROUND

Environmentally responsive nanoscale biocide delivery system enhances smart, regulated, and synergistic biocide application with precise biocide release. In this study, pectin-modified dendritic mesoporous silica nanoparticles (DMSNs) was used as a carrier to successfully construct a microenvironment-responsive (pH, temperature and enzyme) eugenol nano-biocide delivery system for the control of Ralstonia solanacearum infection.

RESULTS

The results showed that the specific surface area, pore size and surface activity of DMSNs significantly influence the biocide loading of eugenol, and the biocide loading capability was up to 72.50%. Eu@DMSNs/Pec had significant pH and pectinase stimulating effects, with varying release amounts under different temperature conditions. Compared with eugenol alone, Eu@DMSNs/Pec significantly enhanced the efficacy of eugenol. DMSNs assisted eugenol to induce peroxidation damage, produce ROS (•O2-, •OH and 1O2), achieve synergistic antibacterial effects, and had better rain erosion resistance and foliar retention rate based on pectin wettability and adhesion. Eu@DMSNs/Pec-FITC showed demonstrated efficient transport characteristics in tomato roots, stems and leaves, which enhanced the control effect on tomato bacterial wilt. In addition, Eu@DMSNs/Pec exert minimal influence on tomato seed germination and root growth, and have low toxicity to non-target organisms such as earthworms. Therefore, Eu@DMSNs/Pec environment-responsive nano-controlled release nanocarrier can effectively achieve accurate biocide release and reduce biocide dosage.

CONCLUSION

This work not only provides a pectin-modified DMSNs-based eugenol nanoscale biocide delivery system in response to specific environmental conditions of R. solanacearum infection but also elucidates the eugenol biocide loading, selective release ability and antibacterial mechanism of the system.

Covalent immobilization of lipase on magnetic biochar for one-pot production of biodiesel from high acid value oil

Magnetic biochar was synthesized via chelation of Fe3+ with carboxymethyl cellulose and pyrolysis for covalently immobilizing Eversa® Transform lipase. The magnetic biochar had 75.8 mg/g lipase loading that was 54.1 % higher than that without magnetism. The immobilized lipase achieved 91.3 mg/g lipase loading with 19.2 U/mg lipase activity after optimization. It showed good thermal and acid stability with 82.5 % and 98.2 % relative activity at 45 °C and pH 4, respectively. Its relative activity was 90.8 % after stored for 30 d at 4 °C. After magnetically separated for 10 cycles, it still kept 70.1 % activity due to the strong covalent bonding. The lipase further catalyzed one-pot esterification and transesterification of high acid value oil (38 mg KOH/g) with 95.7 % biodiesel yield and cycled for 10 times at 85.7 % yield. Kinetic study gave the activation energy of 28.7 kJ/mol. The covalently immobilized lipase could find practical applications.

Bioimaging Probes Based on Magneto-Fluorescent Nanoparticles

Novel nanomaterials are of interest in biology, medicine, and imaging applications. Multimodal fluorescent-magnetic nanoparticles demand special attention because they have the potential to be employed as diagnostic and medication-delivery tools, which, in turn, might make it easier to diagnose and treat cancer, as well as a wide variety of other disorders. The most recent advancements in the development of magneto-fluorescent nanocomposites and their applications in the biomedical field are the primary focus of this review. We describe the most current developments in synthetic methodologies and methods for the fabrication of magneto-fluorescent nanocomposites. The primary applications of multimodal magneto-fluorescent nanoparticles in biomedicine, including biological imaging, cancer treatment, and drug administration, are covered in this article, and an overview of the future possibilities for these technologies is provided.

Biomimetic chitosan-derived bifunctional lubricant with superior antibacterial and hydration lubrication performances

The lubrication deficiency in joints is a major cause of osteoarthritis. One of the most commonly used treatment means is to inject artificial lubricants, but there is a potential risk of infection during the injection process. Therefore, developing artificial lubricants with dual functions of friction-reduction and antibacterial is urgent. In this work, a novel polysaccharide-derived lubricant with simultaneous anti-bacteria and water-lubrication properties, called CS-MPC-N, is developed by grafting 2‑methacryloyloxylethyl phosphorylcholine (MPC) and nisin peptide onto backbone of chitosan (CS). Compared to the control CS, CS-MPC-N exhibits good lubrication and friction-reduction properties because of its excellent water solubility. Especially, CS-MPC-N shows low friction coefficient (0.03 ∼ 0.05) at the sliding interfaces of artificial joints materials or even natural articular cartilages. Moreover, CS-MPC-N can effectively inhibit the proliferation of Staphylococcus aureu, exhibiting excellent antibacterial effect. This kind of novel polysaccharide-derived lubricant is expected to be used in treating infectious arthritis.

Fluorescence and electrochemical integrated dual-signal sensor for the detection of iron ions in water based on an ITO substrate

A fluorescent and electrochemical dual-signal sensor has been fabricated for the visual and sensitive detection of Fe3+ in water.

Characterization of tea tree oil nanoemulsion and its acute and subchronic toxicity

Tea tree oil (TTO) is a popular topical use to treat skin infections. However, its poor aqueous solubility and stability have substantially limited its widespread application, including oral administration that might be therapeutic for enteric infections. In this study, mechanical ultrasonic methods were used to prepare TTO nanoemulsion (nanoTTO) with a mean droplet diameter of 161.80 nm ± 3.97, polydispersity index of 0.21 ± 0.01, and zeta potential of -12.33 ± 0.72 mV. The potential toxicity of nanoTTO was assessed by studying the oral median lethal dose (LD50) and repeated 28-day oral toxicity to provide a reference for in vivo application. Results showed that nanoTTO had no phase separation under a centrifugation test and displayed good stability during storage at -20, 4 and 25 °C over 60 days. Repeated-dose 28-day oral toxicity evaluation revealed no significant effects on growth and behavior. Assessments of hematology, clinical biochemistry, and histopathology indicated no obvious adverse effects in mice at 50, 100 and 200 mg/mL. These data suggest that nanoTTO can be considered a potential antimicrobial agent by oral administration due to its inhibitory effect on bacteria and relatively lower toxicity.

Light-Interacting iron-based nanomaterials for localized cancer detection and treatment

To improve the prognosis of cancer patients, methods of local cancer detection and treatment could be implemented. For that, iron-based nanomaterials (IBN) are particularly well-suited due to their biocompatibility and the various ways in which they can specifically target a tumor, i.e. through passive, active or magnetic targeting. Furthermore, when it is needed, IBN can be associated with well-known fluorescent compounds, such as dyes, clinically approved ICG, fluorescent proteins, or quantum dots. They may also be excited and detected using well-established optical methods, relying on scattering or fluorescent mechanisms, depending on whether IBN are associated with a fluorescent compound or not. Systems combining IBN with optical methods are diverse, thus enabling tumor detection in various ways. In addition, these systems provide a wealth of information, which is inaccessible with more standard diagnostic tools, such as single tumor cell detection, in particular by combining IBN with near-field scanning optical microscopy, dark-field microscopy, confocal microscopy or super-resolution microscopy, or the highlighting of certain dynamic phenomena such as the diffusion of a fluorescent compound in an organism, e.g. using fluorescence lifetime imaging, fluorescence resonance energy transfer, fluorescence anisotropy, or fluorescence tomography. Furthermore, they can in some cases be complemented by a therapeutic approach to destroy tumors, e.g. when the fluorescent compound is a drug, or when a technique such as photo-thermal or photodynamic therapy is employed. This review brings forward the idea that iron-based nanomaterials may be associated with various optical techniques to form a commercially available toolbox, which can serve to locally detect or treat cancer with a better efficacy than more standard medical approaches. STATEMENT OF SIGNIFICANCE: New tools should be developed to improve cancer treatment outcome. For that, two closely-related aspects deserve to be considered, i.e. early tumor detection and local tumor treatment. Here, I present various types of iron-based nanomaterials, which can achieve this double objective when they interact with a beam of light under specific and accurately chosen conditions. Indeed, these materials are biocompatible and can be used/combined with most standard microscopic/optical methods. Thus, these systems enable on the one hand tumor cell detection with a high sensitivity, i.e. down to single tumor cell level, and on the other hand tumor destruction through various mechanisms in a controlled and localized manner by deciding whether or not to apply a beam of light and by having these nanomaterials specifically target tumor cells.

Self-assembly of amphiphilic poly(styrene-b-acrylic acid) on magnetic latex particles and their application as a reusable scale inhibitor

The deposition of scale on membranes or container and pipe surfaces (clogging the system) is a costly issue in water treatment processes or water-cooling systems. To effectively cope with this issue, magnetic polymeric nanoparticles (MPNPs) have been developed and applied as promising scale inhibitors, due to their high surface-area-to-volume ratio, surface modifiability, and magnetic separation ability. Carboxylated MPNPs, having a monodisperse size distribution (236 ± 26 nm) with a high magnetic content of 70 wt% and superparamagnetic properties, were fabricated by using a 2-step process: (i) formation of clusters of hydrophobic magnetic nanoparticles stabilized by oleic acid (OA-MNPs), and (ii) self-assembly of the amphiphilic block copolymer of poly(styrene₂₇-b-acrylic acid₁₂₀) (PS₂₇-b-PAA₁₂₀) onto the cluster surfaces. With application of ultrasonication to 12.0 wt% OA-MNPs, a three-dimensional network was formed by particle–particle interactions, suppressing coalescence, and then creating stable magnetic clusters. The cluster surfaces were then adsorbed by amphiphilic PS₂₇-b-PAA₁₂₀via the attractive force between hydrophobic PS blocks. This moves longer hydrophilic PAA blocks containing carboxylic acid groups into the water phase. The formulated MPNPs acted as a nanosorbent for calcium ion (Ca²⁺) removal with a removal efficiency of 92%. The MPNPs can be effectively reused for up to 4 cycles. Based on the electrostatic interactions between the negatively-charged polymer and the hydrated Ca²⁺, the resulting precipitation leads to the prevention of calcium carbonate scale formation. Insights into this mechanism open up a new perspective for magnetic-material applications as effective antiscalants.

Carboxylated magnetic polymeric nanoparticles, having a high magnetic content, and superparamagnetic properties were prepared and applied as effective antiscalants.

Biomedical and Pharmacological Uses of Fluorescein Isothiocyanate Chitosan-Based Nanocarriers

Chitosan-based nanocarriers (ChNCs) are considered suitable drug carriers due to their ability to encapsulate a variety of drugs and cross biological barriers to deliver the cargo to their target site. Fluorescein isothiocyanate-labeled chitosan-based NCs (FITC@ChNCs) are used extensively in biomedical and pharmacological applications. The main advantage of using FITC@ChNCs consists of the ability to track their fate both intra and extracellularly. This journey is strictly dependent on the physico-chemical properties of the carrier and the cell types under investigation. Other applications make use of fluorescent ChNCs in cell labeling for the detection of disorders in vivo and controlling of living cells in situ. This review describes the use of FITC@ChNCs in the various applications with a focus on understanding their usefulness in labeled drug-delivery systems.

Carbamide peroxide nanoparticles for dental whitening application: Characterization, stability and in vivo/in situ evaluation

Carbamide peroxide is the popular home dental whitening agent. However, it has critical stability. Nanoparticles have been applied to develop products with advantages properties as better efficacy and stability increase. The aim of this study was the characterization of carbamide peroxide polymeric nanoparticles, their bleaching efficacy, effects on pulp damage and stability evaluation. Particle size demonstrated a spherical morphology and bimodal distribution (11 and 398 nm). Nanoparticles presented high entrapment efficiency (98.94%) and the zeta potential value was slightly positive (+10.26 mV). Regardless of the zeta potential, the steric effect may contribute to carbamide peroxide nanoparticle stabilization. The stability studies conducted at room temperature suggested that carbamide peroxide nanoparticles could maintain all the parameters evaluated (size, polydispersity index, zeta potential, entrapment efficiency, pH and content) for at least 90 days. Instability index was determined by dispersion analyzer (LUMiSizer ^®), was 0.018, and the light transmission profile did not present sedimentation. Carbamide peroxide nanoparticles were able to prevent thermal degradation and photostability. Clinical efficacy of the whitening gels was obtained by color change in the spectrophotometer and the results showed that all the evaluated gels containing the nanoparticles (0, 1, 2 and 5% of real carbamide peroxide) were effective at bleaching after 2 h of home whitening treatment (during 30 days). After the treatment, the extracted teeth showed no in situ pulp damage by histological evaluation. The nanotechnology strategy of converting carbamide peroxide into polymeric nanoparticles revealed a new product with improved stability, a good approach for carbamide peroxide delivery.

Incorporation of a rhodamine B conjugated polymer for nanoparticle trafficking both in vitro and in vivo

A method to stably label and quantitatively detect self-assembled nanoparticles by the incorporation of rhodamine B-conjugated poly(ε-caprolactone) (PCL–RhoB).

Improved mucoadhesion and cell uptake of chitosan and chitosan oligosaccharide surface-modified polymer nanoparticles for mucosal delivery of proteins

The main aim of the present study was to compare mucoadhesion and cellular uptake efficiency of chitosan (CS) and chitosan oligosaccharide (COS) surface-modified polymer nanoparticles (NPs) for mucosal delivery of proteins. We have developed poly (D, L-lactide-co-glycolide) (PLGA) NPs, surface-modified COS-PLGA NPs and CS-PLGA NPs, by using double emulsion solvent evaporation method, for encapsulating bovine serum albumin (BSA) as a model protein. Surface modification of NPs was confirmed using physicochemical characterization methods such as particle size and zeta potential, SEM, TEM and FTIR analysis. Both surface-modified PLGA NPs displayed a slow release of protein compared to PLGA NPs. Furthermore, we have explored the mucoadhesive property of COS as a material for modifying the surface of polymeric NPs. During in vitro mucoadhesion test, positively charged COS-PLGA NPs and CS-PLGA NPs exhibited enhanced mucoadhesion, compared to negatively charged PLGA NPs. This interaction was anticipated to improve the cell interaction and uptake of NPs, which is an important requirement for mucosal delivery of proteins. All nanoformulations were found to be safe for cellular delivery when evaluated in A549 cells. Moreover, intracellular uptake behaviour of FITC-BSA loaded NPs was extensively investigated by confocal laser scanning microscopy and flow cytometry. As we hypothesized, positively charged COS-PLGA NPs and CS-PLGA NPs displayed enhanced intracellular uptake compared to negatively charged PLGA NPs. Our results demonstrated that CS- and COS-modified polymer NPs could be promising carriers for proteins, drugs and nucleic acids via nasal, oral, buccal, ocular and vaginal mucosal routes.

Multifunctional Fluorescent-Magnetic Polymeric Colloidal Particles: Preparations and Bioanalytical Applications

Fluorescent-magnetic particles (FMPs) play important roles in modern materials, especially as nanoscale devices in the biomedical field. The interesting features of FMPs are attributed to their dual detection ability, i.e., fluorescent and magnetic modes. Functionalization of FMPs can be performed using several types of polymers, allowing their use in various applications. The synergistic potentials for unique multifunctional, multilevel targeting nanoscale devices as well as combination therapies make them particularly attractive for biomedical applications. However, the synthesis of FMPs is challenging and must be further developed. In this review article, we summarized the most recent representative works on polymer-based FMP systems that have been applied particularly in the bioanalytical field.

Mesenchymal stem cell in vitro labeling by hybrid fluorescent magnetic polymeric particles for application in cell tracking

Mesenchymal stem cells (MSCs) are a type of adult stem cell that contains multi-differentiation and proliferative properties and that shows high treatment implications for many clinical problems. The outcome of stem cell transplantation is still limited due to many factors, especially their survival and their interaction with the microenvironment after transplantation. Molecular imaging is a challenging technique that has been used to overcome this limitation and is based on the concept of labeling cells with tractable, visible, and non-toxic materials to track the cells after transplantation. In this study, magnetic polymeric nanoparticles (MPNPs) were used to directly label Wharton's jelly-derived MSCs (WJ-MSCs). After labeling, the growth rate and the viability of the MSCs as well as the time of exposure were determined. The 3D images of WJ-MSCs labeled with MPNPs for 24 h were created using confocal microscopy. The results showed that, after incubation with fluorescent MPNPs for over 8 h, the growth rate and cell viability of the WJ-MSCs was similar to those of the control. Three-dimensional imaging revealed that the fluorescent MPNPs could infiltrate into the cells and spread into the cytoplasm, which suggests that the synthesized fluorescent MPNPs could possibly label MSCs for cell tracking study and be further developed for in vivo applications.

Fluorescent chitosan functionalized magnetic polymeric nanoparticles: Cytotoxicity and in vitro evaluation of cellular uptake

Nanoparticles possessing magnetic and fluorescent properties were fabricated by the covalent attachment of fluorescein isothiocyanate onto magnetic polymeric nanoparticles functionalized by chitosan. The synthesized magnetic polymeric nanoparticles-chitosan/fluorescein isothiocyanate were successfully used for labeling the living organ and blood-related cancer cells, i.e., HeLa, Hep G2, and K562 cells. The cytotoxicity test of nanoparticles at various incubation times indicated the high cell viability (>90%) without morphological change. The confocal microscopy revealed that they could pass through cell membrane within 2 h for K562 cells and 3 h for HeLa and Hep G2 cells and then confine inside cytoplasm of all types of tested cells for at least 24 h. Therefore, the synthesized magnetic polymeric nanoparticles-chitosan/fluorescein isothiocyanate would potentially be used as cell tracking in theranostic applications.

Guiding principles in the design of ligand-targeted nanomedicines

Medicines for the treatment of most human pathologies are encumbered by unwanted side effects that arise from the deposition of an effective drug into the wrong tissues. The logical remedy for these undesirable properties involves selective targeting of the therapeutic agent to pathologic cells, thereby avoiding collateral toxicity to healthy cells. Since significant advantages can also accrue by incorporating a therapeutic or imaging agent into a nanoparticle, many laboratories are now combining both benefits into a single formulation. This review will focus on the major guiding principles in the design of ligand-targeted nanoparticles, including optimization of their chemical and physical properties, selection of the ideal targeting ligand, engineering of the appropriate surface passivation and linker strategies to achieve selective delivery of the entrapped cargo to the desired diseased cell.