Plasma polymerized allylamine coated quartz particles for humic acid removal

Surface Bio-engineered Polymeric Nanoparticles

Surface bio-engineering of polymeric nanoparticles (PNPs) has emerged as a cornerstone in contemporary biomedical research, presenting a transformative avenue that can revolutionize diagnostics, therapies, and drug delivery systems. The approach involves integrating bioactive elements on the surfaces of PNPs, aiming to provide them with functionalities to enable precise, targeted, and favorable interactions with biological components within cellular environments. However, the full potential of surface bio-engineered PNPs in biomedicine is hampered by obstacles, including precise control over surface modifications, stability in biological environments, and lasting targeted interactions with cells or tissues. Concerns like scalability, reproducibility, and long-term safety also impede translation to clinical practice. In this review, these challenges in the context of recent breakthroughs in developing surface-biofunctionalized PNPs for various applications, from biosensing and bioimaging to targeted delivery of therapeutics are discussed. Particular attention is given to bonding mechanisms that underlie the attachment of bioactive moieties to PNP surfaces. The stability and efficacy of surface-bioengineered PNPs are critically reviewed in disease detection, diagnostics, and treatment, both in vitro and in vivo settings. Insights into existing challenges and limitations impeding progress are provided, and a forward-looking discussion on the field's future is presented. The paper concludes with recommendations to accelerate the clinical translation of surface bio-engineered PNPs.

Plasma-enhanced modification of polysaccharides for wastewater treatment: A review

In this work, novel polysaccharide-based sorbents modified with plasma technologies are discussed. Plasma selectively modifies the surface properties by generating specific moieties, enhancing adsorption performance, and the physical-chemical properties of the material without modifying its bulk properties. Among plasma technologies, cold plasma is more suitable and energy-efficient, since thermal-sensitive materials could be modified using this technology. Besides, atmospheric-pressure plasma systems possess the required features to scale-up plasma technologies for surface modification of sorbents. Moreover, a big challenge is the semi-continuous operation to modify sorbents as it would decrease overall process costs. Due to its low-cost and extensive availability, polysaccharide-based sorbents are promising substrates for plasma-enhanced modification to develop highly efficient adsorbents. The development of polysaccharide-based materials includes modified cellulose, chitosan, or lignocellulosic materials with functionalities that increase adsorption capacity and selectivity towards a specific organic or inorganic pollutant.

Field Deployable Method for Gold Detection Using Gold Pre-Concentration on Functionalized Surfaces

Keywords: surface chemistry, plasma polymerization, salinization, gold sensing.

Multitechnique investigation into the aqueous behavior of plasma polymers

Plasma polymers are often used in applications requiring aqueous immersion; therefore, it is important to understand how this exposure affects the physical and chemical properties of the films. Three different plasma polymer films were deposited at different distances from the electrode, and the film properties were characterized using contact angle, ellipsometry, and x-ray photoelectron spectroscopy. The film behaviors in aqueous solutions were studied via quartz crystal microbalance with dissipation (QCM-D). Exposure to buffer solutions produced significant swelling of the plasma polymerized acrylic acid films, with swelling increasing with distance from the powered electrode, results that could be correlated with changes in film chemistry. Plasma polymerized octadiene and allylamine exhibited little swelling. These films exhibited changes in thickness and contact angle with respect to distance from the electrode, but this had little influence on their behavior in aqueous solution. By combining QCM-D with the more traditional surface chemical analysis techniques, the authors have been able to explore both swelling behavior and the effect that sample position and thus deposition parameters have on film properties and aqueous behavior. This approach gives the authors the basis to define deposition parameters to assist the engineering of thin films for applications such as biosensing and tissue engineering applications where specific chemistries and film behaviors are desired.

Plasma polymer facilitated magnetic technology for removal of oils from contaminated waters

Oil pollution of waters is one of the most serious environmental problems globally. The long half-life and persistence within the environment makes oil particularly toxic and difficult to remediate. There is a significant need for efficient and cost-effective oil recovery technologies to be brought in to practice. In this study, we developed a facile and efficient magnetic separation method. The surface of 316L stainless steel nanoparticles was modified by plasma deposition of 1,7-octadiene and perfluorooctane, producing relatively hydrophobic coatings having water contact angles of 86 and 100°, respectively. Both coatings had high oil removal efficiency (ORE) of >99%. The captured oil could be easily separated by applying an external magnetic force. The ease of material preparation and separation from the water after the oil is captured, and its high ORE is a compelling argument for further development and optimization of the technology to possible utilization into practice. Furthermore, the capacity of plasma polymerization to deliver desired surface properties can extend the application of the technology to removing other chemical and biological contaminants from polluted waters.

Electric fields control the orientation of peptides irreversibly immobilized on radical-functionalized surfaces

Surface functionalization of an implantable device with bioactive molecules can overcome adverse biological responses by promoting specific local tissue integration. Bioactive peptides have advantages over larger protein molecules due to their robustness and sterilizability. Their relatively small size presents opportunities to control the peptide orientation on approach to a surface to achieve favourable presentation of bioactive motifs. Here we demonstrate control of the orientation of surface-bound peptides by tuning electric fields at the surface during immobilization. Guided by computational simulations, a peptide with a linear conformation in solution is designed. Electric fields are used to control the peptide approach towards a radical-functionalized surface. Spontaneous, irreversible immobilization is achieved when the peptide makes contact with the surface. Our findings show that control of both peptide orientation and surface concentration is achieved simply by varying the solution pH or by applying an electric field as delivered by a small battery.

pH-dependent lipid vesicle interactions with plasma polymerized thin films

Model lipid vesicle and supported lipid bilayer (SLB) systems are used in a variety of applications including biosensing, cell membrane mimics, and drug delivery. Exposure of a surface to a vesicle solution provides a straightforward method for creating such systems via vesicle adsorption and collapse. However, this process is complex and the relationship between the surface physicochemical properties and vesicle collapse is poorly understood. Plasma polymers are thin conformal films that can be applied to a variety of materials to modify surface properties. This paper uses quartz crystal microbalance with dissipation and fluorescence recovery after photobleaching (FRAP) to explore lipid vesicle interactions with plasma polymerized acrylic acid (ppAAc), allylamine (ppAAm), and ppAAc/ppAAm micropatterns. Vesicle interactions were dependent on plasma polymer chemistry and pH of the buffer solution. Vesicles readily and stably adsorbed to ppAAm over a wide pH range. ppAAc demonstrated limited interactions at pH 7 and vesicle adsorption at pH 4. Vesicle collapse and SLB formation could be induced using a pH change. FRAP was used to explore the fluidity of the lipid structures on both the patterned and unpatterned plasma polymer films. On ppAAm/ppAAc micropatterns, pH transitions combined with the presence of chemically distinct regions on the same substrate enabled immobile lipid islands on ppAAc to be surrounded by fluid lipid regions on ppAAm. This work demonstrates that plasma polymer films could enable spatially controlled vesicle adsorption and SLB formation on a wide variety of different substrates.

Substrate-Regulated Growth of Plasma-Polymerized Films on Carbide-Forming Metals

Although plasma polymerization is traditionally considered as a substrate-independent process, we present evidence that the propensity of a substrate to form carbide bonds regulates the growth mechanisms of plasma polymer (PP) films. The manner by which the first layers of PP films grow determines the adhesion and robustness of the film. Zirconium, titanium, and silicon substrates were used to study the early stages of PP film formation from a mixture of acetylene, nitrogen, and argon precursor gases. The correlation of initial growth mechanisms with the robustness of the films was evaluated through incubation of coated substrates in simulated body fluid (SBF) at 37° for 2 months. It was demonstrated that the excellent zirconium/titanium-PP film adhesion is linked to the formation of metallic carbide and oxycarbide bonds during the initial stages of film formation, where a 2D-like, layer-by-layer (Frank-van der Merwe) manner of growth was observed. On the contrary, the lower propensity of the silicon surface to form carbides leads to a 3D, island-like (Volmer-Weber) growth mode that creates a sponge-like interphase near the substrate, resulting in inferior adhesion and poor film stability in SBF. Our findings shed light on the growth mechanisms of the first layers of PP films and challenge the property of substrate independence typically attributed to plasma polymerized coatings.

Purification of industrial phosphoric acid (54 %) using Fe-pillared bentonite

The current problem of excess impurities in industrial phosphoric acid (IPA) 54 % P2O5 makes phosphates industries look toward low-cost but efficient adsorbents. In the present study, iron-oxide-modified bentonite (Fe-PILB) was prepared and investigated as a possible adsorbent for the removal of organic matter (OM) like humic acid (HA), chromium (Cr(III)), and zinc (Zn(II)) from IPA aqueous solutions. These adsorbents were characterized using XRD, TEM, and BET. The adsorption of impurities is well described by the pseudo-second-order model. The results indicate that Fe-PILB has a good ability to resist co-existing anions and the low-pH condition of IPA and owns a relatively high-removal capacity of 80.42 and 25 % for OM, Cr(III), and Zn(II). The mechanism of adsorption may be described by the ligand and ion exchange that happened on the active sites. The selected order of adsorption OM > Cr(3+) > Zn(2+) showed the importance of the competitive phenomenon onto bentonite materials' pore adsorption. For the adsorption of OM at the low pH of IPA, H-bond complexation was the dominant mechanism. From the adsorption of heavy metals and OM complex compounds contained in IPA 54 % on Fe-PILB, the bridging of humic acid between bentonite and heavy metals (Zn(II) or Cr(III)) is proposed as the dominant adsorption mechanism (bentonite-HA-Me). Overall, the results obtained in this study indicate Fe-pillared bentonite possesses a potential for the practical application of impurity (OM, Zn(II), and Cr(III)) removal from IPA aqueous solutions.

Plasma polymer-functionalized silica particles for heavy metals removal

Highly negatively charged particles were fabricated via an innovative plasma-assisted approach for the removal of heavy metal ions. Thiophene plasma polymerization was used to deposit sulfur-rich films onto silica particles followed by the introduction of oxidized sulfur functionalities, such as sulfonate and sulfonic acid, via water-plasma treatments. Surface chemistry analyses were conducted by X-ray photoelectron spectroscopy and time-of-flight secondary ion mass spectroscopy. Electrokinetic measurements quantified the zeta potentials and isoelectric points (IEPs) of modified particles and indicated significant decreases of zeta potentials and IEPs upon plasma modification of particles. Plasma polymerized thiophene-coated particles treated with water plasma for 10 min exhibited an IEP of less than 3.5. The effectiveness of developed surfaces in the adsorption of heavy metal ions was demonstrated through copper (Cu) and zinc (Zn) removal experiments. The removal of metal ions was examined through changing initial pH of solution, removal time, and mass of particles. Increasing the water plasma treatment time to 20 min significantly increased the metal removal efficiency (MRE) of modified particles, whereas further increasing the plasma treatment time reduced the MRE due to the influence of an ablation mechanism. The developed particulate surfaces were capable of removing more than 96.7% of both Cu and Zn ions in 1 h. The combination of plasma polymerization and oxidative plasma treatment is an effective method for the fabrication of new adsorbents for the removal of heavy metals.

Development of negatively charged particulate surfaces through a dry plasma-assisted approach

A completely dry method has been introduced for the development of negatively charged oxidized sulfur-terminated particles.

Development of oxidized sulfur polymer films through a combination of plasma polymerization and oxidative plasma treatment

A novel two-step process consisting of plasma polymerization and oxidative plasma treatment is introduced in this article for the first time for the fabrication of -SO(x)(H)-functionalized surfaces. Plasma-polymerized thiophene (PPT) was initially deposited onto silicon wafers and subsequently SO(x)(H)-functionalized using air or oxygen plasma. The effectiveness of both air and oxygen plasma treatments in introducing sulfur-oxygen groups into the PPT film was investigated as the plasma input specific energy and treatment time were varied. The surface chemistries of untreated and treated PPT coatings were analyzed by X-ray photoelectron spectroscopy (XPS) and time-of-flight secondary ion mass spectroscopy (ToF-SIMS), whereas spectroscopic ellipsometry was used to evaluate the film thickness and ablation rate. Surface chemistry analyses revealed that high concentrations of -SO(x)(H) functionalities were generated on the surface upon either air or oxygen plasma treatment. It was found that, at low plasma input energies, the oxidation process was dominant whereas, at higher energies, ablation of the film became more pronounced. The combination of thiophene plasma polymerization and air/oxygen plasma treatment was found to be a successful approach to the fabrication of -SO(x)(H)-functionalized surfaces.

Hydrophobic plasma polymer coated silica particles for petroleum hydrocarbon removal

In recent years, functionalized hydrophobic materials have attracted considerable interest as oil removal agents. This investigation has applied plasma polymerization as a novel method to develop hydrophobic and oleophilic particles for water purification. 1,7-Octadiene was plasma polymerized onto silica particles using a radio frequency inductively coupled reactor fitted with a rotating chamber. Plasma polymerized 1,7-octadiene (ppOD) films were deposited using plasma power of 40 W and monomer flow rate of 2 sccm, while polymerization time was varied from 5 to 60 min. The surface chemistry of ppOD coated particles was investigated via X-ray photoelectron spectroscopy and time-of-flight secondary ion mass spectroscopy, while Washburn capillary rise measurements were applied to evaluate the hydrophobicity and oleophilicity of the particles. The effectiveness of ppOD coated particles for the removal of hydrophobic matter from water was demonstrated by adsorption of motor oil, kerosene, and crude oil. Petroleum hydrocarbon removal was examined by varying removal time and particle mass. The morphology of oil-loaded ppOD coated particles was examined via environmental scanning electron microscopy observations. Increasing the polymerization time increased the concentration of hydrocarbon functionalities on the surface, thus also increasing the hydrophobicity and oil removal efficiency (ORE). The ppOD coated particles have shown to have excellent ORE. These particles were capable of removing 99.0-99.5% of high viscosity motor oil in 10 min, while more than 99.5% of low viscosity crude oil and kerosene was adsorbed in less than 30 s. Plasma polymerization has shown to be a promising approach to produce a new class of materials for a fast, facile, and efficient oil removal.

Influence of film stability and aging of plasma polymerized allylamine coated quartz particles on humic acid removal

Plasma polymerized allylamine (ppAA) films have been successfully deposited on to the surface of quartz particles via a rotating barrel plasma reactor for humic acid removal. The films were deposited at a power of 25 W, allylamine flow rate of 4.4 sccm and polymerization times of 5 to 60 min. X-ray photoelectron spectroscopy was used to investigate the influence of short-term stirring in water and film age on surface chemistry. Stirring results in a reduction in the nitrogen concentration, which was greatest for shorter polymerization times. Film aging of up to 52 weeks appeared to result in a reduction in the concentration of C-N species. The influence of batch, recycling, and film age on humic acid removal was investigated. Humic acid removal appeared to be reproducible across three separate batches for polymerization times of 20 min or more, which was attributed to film thickness. Recycling of the ppAA films was most successful at pH 11 for up to 4 humic acid removal/regeneration cycles. Successful regeneration at pH 11 was attributed to electrostatic repulsion of the adsorbed humic acid molecules. Decreasing the pH of the regeneration solution reduced the number of successful regeneration cycles due to greater retention of adsorbed humic acid via electrostatic attraction. Film age appears to have minimal effect on humic acid removal where freshly deposited and 52-week-old films removed similar masses of humic acid. Successful production and development of ppAA coated quartz particles has resulted in a functional material that can be incorporated into a water treatment system to improve water quality.

Preparation and characterization of surfactant-modified hydroxyapatite/zeolite composite and its adsorption behavior toward humic acid and copper(II)

A novel composite material, i.e., surfactant-modified hydroxyapatite/zeolite composite, was used as an adsorbent to remove humic acid (HA) and copper(II) from aqueous solution. Hydroxyapatite/zeolite composite (HZC) and surfactant-modified HZC (SMHZC) were prepared and characterized by X-ray diffraction, Fourier transform infrared spectroscopy, and field emission scanning electron microscope. The adsorption of HA and copper(II) on SMHZC was investigated. For comparison purposes, HA adsorption onto HZC was also investigated. SMHZC exhibited much higher HA adsorption capacity than HZC. The HA adsorption capacity for SMHZC decreased slightly with increasing pH from 3 to 8 but decreased significantly with increasing pH from 8 to 12. The copper(II) adsorption capacity for SMHZC increased with increasing pH from 3 to 6.5. The adsorption kinetic data of HA and copper(II) on SMHZC obeyed a pseudo-second-order kinetic model. The adsorption of HA and copper(II) on SMHZC took place in three different stages: fast external surface adsorption, gradual adsorption controlled by both film and intra-particle diffusions, and final equilibrium stage. The equilibrium adsorption data of HA on SMHZC better fitted to the Langmuir isotherm model than the Freundlich isotherm model. The equilibrium adsorption data of copper(II) on SMHZC could be described by the Langmuir, Freundlich, and Dubinin-Radushkevich isotherm models. The presence of copper(II) in solution enhanced HA adsorption onto SMHZC. The presence of HA in solution enhanced copper(II) adsorption onto SMHZC. The mechanisms for the adsorption of HA on SMHZC at pH 7 may include electrostatic attraction, organic partitioning, hydrogen bonding, and Lewis acid-base interaction. The mechanisms for the adsorption of copper(II) on SMHZC at pH 6 may include surface complexation, ion exchange, and dissolution-precipitation. The obtained results indicate that SMHZC can be used as an effective adsorbent to simultaneously remove HA and copper(II) from water.