Core–shell nano-architectures: The incorporation mechanism of hydrophobic nanoparticles into the aqueous core of a microemulsion

Oleic acid/oleylamine ligand pair: a versatile combination in the synthesis of colloidal nanoparticles

A variety of colloidal chemical approaches has been developed in the last few decades for the controlled synthesis of nanostructured materials in either water or organic solvents. Besides the precursors, the solvents, reducing agents, and the choice of surfactants are crucial for tuning the composition, morphology and other properties of the resulting nanoparticles. The ligands employed include thiols, amines, carboxylic acids, phosphines and phosphine oxides. Generally, adding a single ligand to the reaction mixture is not always adequate to yield the desired features. In this review, we discuss in detail the role of the oleic acid/oleylamine ligand pair in the chemical synthesis of nanoparticles. The combined use of these ligands belonging to two different categories of molecules aims to control the size and shape of nanoparticles and prevent their aggregation, not only during their synthesis but also after their dispersion in a carrier solvent. We show how the different binding strengths of these two molecules and their distinct binding modes on specific facets affect the reaction kinetics toward the production of nanostructures with tailored characteristics. Additional functions, such as the reducing function, are also noted, especially for oleylamine. Sometimes, the carboxylic acid will react with the alkylamine to form an acid-base complex, which may serve as a binary capping agent and reductant; however, its reducing capacity may range from lower to much lower than that of oleylamine. The types of nanoparticles synthesized in the simultaneous presence of oleic acid and oleylamine and discussed herein include metal oxides, metal chalcogenides, metals, bimetallic structures, perovskites, upconversion particles and rare earth-based materials. Diverse morphologies, ranging from spherical nanoparticles to anisotropic, core-shell and hetero-structured configurations are presented. Finally, the relation between tuning the resulting surface and volume nanoparticle properties and the relevant applications is highlighted.

Charge-driven interfacial gelation of cellulose nanofibrils across the water/oil interface

Interfacial gels, obtained by the interaction of water-dispersible oxidised cellulose nanofibrils (OCNF) and oil-soluble oleylamine (OA), were produced across water/oil (W/O) interfaces. Surface rheology experiments showed that the complexation relies on the charge coupling between the negatively-charged OCNF and OA. Complexation across the W/O interface was found to be dependent on the ζ-potential of the OCNF (modulated by electrolyte addition), leading to different interfacial properties. Spontaneous OCNF adsorption at the W/O interface occurred for particles with ζ-potential more negative than -30 mV, resulting in the formation of interfacial gels; whilst for particles with ζ-potential of ca. -30 mV, spontaneous adsorption occurred, coupled with augmented interfibrillar interactions, yielding stronger and tougher interfacial gels. On the contrary, charge neutralisation of OCNF (ζ-potential values more positive than -30 mV) did not allow spontaneous adsorption of OCNF at the W/O interface. In the case of favourable OCNF adsorption, the interfacial gel was found to embed oil-rich droplets - a spontaneous emulsification process.

Probing the Influence of Disorder on Lanthanide Luminescence Using Eu-Doped LaPO4 Nanoparticles

Lanthanide-doped nanocrystals (NCs) differ from their bulk counterparts due to their large surface to volume ratio. It is generally assumed that the optical properties are not affected by size effects as electronic transitions occur within the well-shielded 4f shell of the lanthanide dopant ions. However, defects and disorder in the surface layer can affect the luminescence properties. Trivalent europium is a suitable ion to investigate the subtle influence of the surface, because of its characteristic luminescence and high sensitivity to the local environment. Here, we investigate the influence of disorder in NCs on the optical properties of lanthanide dopants by studying the inhomogeneous linewidth, emission intensity ratios, and luminescence decay curves for LaPO₄:Eu³⁺ samples of different sizes (4 nm to bulk) and core-shell configurations (core, core-isocrystalline shell, and core-silica shell). We show that the emission linewidths increase strongly for NCs. The ratio of the intensities of the forced electric dipole (ED) and magnetic dipole (MD) transitions, a measure for the local symmetry distortion around Eu³⁺ ions, is higher for samples with a large fraction of Eu³⁺ ions close to the surface. Finally, we present luminescence decay curves revealing an increased nonradiative decay rate for Eu³⁺ in NCs. The effects are strongest in core and core-silica shell NCs and can be reduced by growth of an isocrystalline LaPO₄ shell. The present systematic study provides quantitative insight into the role of surface disorder on the optical properties of lanthanide-doped NCs. These insights are important in emerging applications of lanthanide-doped nanocrystals.

Ultrathin and Highly Passivating Silica Shells for Luminescent and Water-Soluble CdSe/CdS Nanorods

Microemulsion (water-in-oil) methods enable the encapsulation of individual nanoparticles into SiO₂ spheres. The major drawbacks of this method, when applied for silica encapsulation of anisotropic nanorods (NRs), are spatially unequal silica growth and long reaction times (24 h at least). In this work, various tetraalkoxysilanes [tetramethyl orthosilicate (TMOS), tetraethyl orthosilicate (TEOS), and tetrapropyl orthosilicate (TPOS)] with different alkyl-chain lengths were used as silica precursors in attempt to tune the silanization behavior of CdSe/CdS NRs in a microemulsion system. We find enhanced spatial homogeneity of silica growth with decreasing alkyl-chain length of the tetraalkoxysilanes. In particular, by use of TMOS as the precursor, NRs can be fully encapsulated in a continuous thin (≤5 nm) silica shell within only 1 h reaction time. Surprisingly, the thin silica shell showed a superior shielding ability to acidic environment, even compared to the 30 nm thick shell prepared by use of TEOS. Our investigations suggest that the lower steric hindrance of TMOS compared to TEOS or TPOS strongly promotes homogeneous growth of the silica shells, while its increased hydrolysis rate decreases the porosity of these shells.

Role of Capping Agent in Wet Synthesis of Nanoparticles

Aqueous-based synthesis is one of the most popular methods to prepare nanoparticles. In these procedures, surfactants are needed to regulate the growth and final particle size. While there are numerous evidence on the decisive role of surfactants, a quantitative description remains elusive. This study develops a theoretical model to correlate the surfactant activities to particle growth. In the model, the "penetrability" of ions within surfactant layer is used to combine surface reaction and adsorption/desorption processes. The penetrability was then directly correlated to surfactant size. The theory was verified by synthesis of iron oxide nanoparticles with series of cationic surfactants. Eight surfactants, with same headgroup and increasing hydrocarbon tail, were employed. The experimental data showed a deterministic correlation between surfactant tails and particle size. The experimental correlation between surfactant length and particle size was predicted by the model. The modeling results verify the role of surfactant as capping agent during particle growth. More importantly, it provides a theoretical framework to control particle size in wet synthesis.

Incorporation of Ln-Doped LaPO4 Nanocrystals as Luminescent Markers in Silica Nanoparticles

Lanthanide ions are promising for the labeling of silica nanoparticles with a specific luminescent fingerprint due to their sharp line emission at characteristic wavelengths. With the increasing use of silica nanoparticles in consumer products, it is important to label silica nanoparticles in order to trace the biodistribution, both in the environment and living organisms.In this work, we synthesized LaPO4 nanocrystals (NCs) with sizes ranging from 4 to 8 nm doped with europium or cerium and terbium. After silica growth using an inverse micelle method, monodisperse silica spheres were obtained with a single LaPO4 NC in the center. We demonstrate that the size of the silica spheres can be tuned in the 25-55 nm range by addition of small volumes of methanol during the silica growth reaction. Both the LaPO4 core and silica nanocrystal showed sharp line emission characteristic for europium and terbium providing unique optical labels in silica nanoparticles of variable sizes.

Protective ligand shells for luminescent SiO₂-coated alloyed semiconductor nanocrystals

SiO2 encapsulation of alloyed CdSeZnS nanocrystals (NCs) shows differences in terms of optical properties and luminescence quantum yield, depending on the surface composition, size, and ligand content. In this work, emphasis has been placed on the fine control required to obtain luminescent SiO2 encapsulated NCs by studying the role of oleic acid (OA), stearic acid (SA), and dodecanethiol (DDT) ligands on the alloyed NCs. While the use of anchored DDT molecules is essential to preserve the optical properties, intercalated OA and SA play a critical role for SiO2 nucleation, as stated by (1)H NMR (including DOSY and NOESY) spectroscopy. These results emphasize the importance of surface chemistry in NCs; it is crucial to control their reactivity, and therefore their impact, in different applications, from optics to biomedicine.

Silica-based nanocomposites via reverse microemulsions: classifications, preparations, and applications

Silica-based nanocomposites with amorphous silica as the matrix or carrier along with a functional component have been extensively investigated. These nanocomposites combine the advantages of both silica and the functional components, demonstrating great potential for various applications. To synthesize such composites, one of the most frequently used methods is reverse microemulsion due to its convenient control over the size, shape, and structures. The structures of the composites have a decisive significance for their properties and applications. In this review, we tried to categorize the silica-based nanocomposites via reverse microemulsions based on their structures, discussed the syntheses individually for each structure, summarized their applications, and made some perspectives based on the current progress of this field.