Temperature and pH dual-responsive POEGMA-based coatings for protein adsorption

Switching it Up: The Promise of Stimuli-Responsive Polymer Systems in Biomedical Science

Responsive polymer systems have the ability to change properties or behavior in response to external stimuli. The properties of responsive polymer systems can be fine-tuned by adjusting the stimuli, enabling tailored responses for specific applications. These systems have applications in drug delivery, biosensors, tissue engineering, and more, as their ability to adapt and respond to dynamic environments leads to improved performance. However, challenges such as synthesis complexity, sensitivity limitations, and manufacturing issues need to be addressed for successful implementation. In our review, we provide a comprehensive summary on stimuli-responsive polymer systems, delving into the intricacies of their mechanisms and actions. Future developments should focus on precision medicine, multifunctionality, reversibility, bioinspired designs, and integration with advanced technologies, driving the dynamic growth of sensitive polymer systems in biomedical applications.

Thermoresponsive Smart Copolymer Coatings Based on P(NIPAM-co-HEMA) and P(OEGMA-co-HEMA) Brushes for Regenerative Medicine

The fabrication of multifunctional, thermoresponsive platforms for regenerative medicine based on polymers that can be easily functionalized is one of the most important challenges in modern biomaterials science. In this study, we utilized atom transfer radical polymerization (ATRP) to produce two series of novel smart copolymer brush coatings. These coatings were based on copolymerizing 2-hydroxyethyl methacrylate (HEMA) with either oligo(ethylene glycol) methyl ether methacrylate (OEGMA) or N-isopropylacrylamide (NIPAM). The chemical compositions of the resulting brush coatings, namely, poly(oligo(ethylene glycol) methyl ether methacrylate-co-2-hydroxyethyl methacrylate) (P(OEGMA-co-HEMA)) and poly(N-isopropylacrylamide-co-2-hydroxyethyl methacrylate) (P(NIPAM-co-HEMA)), were predicted using reactive ratios of the monomers. These predictions were then verified using time-of-flight-secondary ion mass spectrometry (ToF-SIMS) and X-ray photoelectron spectroscopy (XPS). The thermoresponsiveness of the coatings was examined through water contact angle (CA) measurements at different temperatures, revealing a transition driven by lower critical solution temperature (LCST) or upper critical solution temperature (UCST) or a vanishing transition. The type of transition observed depended on the chemical composition of the coatings. Furthermore, it was demonstrated that the transition temperature of the coatings could be easily adjusted by modifying their composition. The topography of the coatings was characterized using atomic force microscopy (AFM). To assess the biocompatibility of the coatings, dermal fibroblast cultures were employed, and the results indicated that none of the coatings exhibited cytotoxicity. However, the shape and arrangement of the cells were significantly influenced by the chemical structure of the coating. Additionally, the viability of the cells was correlated with the wettability and roughness of the coatings, which determined the initial adhesion of the cells. Lastly, the temperature-induced changes in the properties of the fabricated copolymer coatings effectively controlled cell morphology, adhesion, and spontaneous detachment in a noninvasive, enzyme-free manner that was confirmed using optical microscopy.

Temperature-Responsive Polymer Brush Coatings for Advanced Biomedical Applications

Modern biomedical technologies predict the application of materials and devices that not only can comply effectively with specific requirements, but also enable remote control of their functions. One of the most prospective materials for these advanced biomedical applications are materials based on temperature-responsive polymer brush coatings (TRPBCs). In this review, methods for the fabrication and characterization of TRPBCs are summarized, and possibilities for their application, as well as the advantages and disadvantages of the TRPBCs, are presented in detail. Special attention is paid to the mechanisms of thermo-responsibility of the TRPBCs. Applications of TRPBCs for temperature-switchable bacteria killing, temperature-controlled protein adsorption, cell culture, and temperature-controlled adhesion/detachment of cells and tissues are considered. The specific criteria required for the desired biomedical applications of TRPBCs are presented and discussed.

Role of protein-copolymer assembly in controlling micellization process of amphiphilic triblock copolymer

HYPOTHESIS

Triblock copolymer poly(ethylene glycol)-block-poly(propylene glycol)-block-poly(ethylene glycol) (PEG-PPG-PEG) forms a well-known micellar assembly at a particular temperature. Apart from regular assembly within the copolymer, it is crucial to explore additional assembly behaviour via simple exposure of proteins which unveils biased interactions with blocks of copolymer. The current work focuses on the examination of Pluronic F108 i.e. PEG-PPG-PEG with two different proteins i.e. α-chymotrypsin (CT) and lysozyme (LSZ), aiming at probing the critical micellization temperature (CMT) and molecular level interactions.

EXPERIMENTS

Potential role of protein-copolymer assembly formation at a particular concentration of protein in modulating CMT was shown by a systematic experimental approach combined with a series of physicochemical methods. The sophisticated multiple techniques include fluorescence spectroscopy, Fourier transform infrared (FTIR) spectroscopy, Raman spectroscopy, dynamic light scattering (DLS), zeta potential measurements, scanning electron microscopy (SEM) and transmission electron microscopy (TEM). Furthermore, molecular docking studies were also employed to correlate theoretical insights with experimental findings.

FINDINGS

CT and LSZ decrease CMT in regular concentration-dependent manner except for particular concentration (1.5 mg/mL) of LSZ which shows anomalous behaviour in steady-state fluorescence spectroscopy, temperature dependent fluorescence spectroscopy, Raman spectroscopy and DLS measurements. SEM and TEM results clearly reveal protein-copolymer assembly formation. The assembled structure has different biophysical properties. Docking studies elucidate several bio macromolecular interactions which can be involved in assembly formation. Based on obtained results from biophysical techniques mechanism of CMT variation was deduced. Obtained results can be useful in biosensors and targeted drug delivery systems.

Stimulus-Responsive Polymers Based on Polypeptoid Skeletons

Polypeptoids have attracted a lot of atteSDntion because of their unique structural characteristics and special properties. Polypeptoids have the same main chain structures to polypeptides, making them have low cytotoxicity and excellent biocompatibility. Polypeptoids can also respond to external environmental changes by modifying the configurations of the side chains. The external stimuli can be heat, pH, ions, ultraviolet/visible light and active oxygen or their combinations. This review paper discussed the recent research progress in the field of stimulus-responsive polypeptoids, including the design of new stimulus-responsive polypeptoid structures, controlled actuation factors in response to external stimuli and the application of responsive polypeptoid biomaterials in various biomedical and biological nanotechnology, such as drug delivery, tissue engineering and biosensing.

Fabrication and Impact of Fouling-Reducing Temperature-Responsive POEGMA Coatings with Embedded CaCO3 Nanoparticles on Different Cell Lines

In the present work, we have successfully prepared and characterized novel nanocomposite material exhibiting temperature-dependent surface wettability changes, based on grafted brush coatings of non-fouling poly(di(ethylene glycol)methyl ether methacrylate) (POEGMA) with the embedded CaCO3 nanoparticles. Grafted polymer brushes attached to the glass surface were prepared in a three-step process using atom transfer radical polymerization (ATRP). Subsequently, uniform CaCO3 nanoparticles (NPs) embedded in POEGMA-grafted brush coatings were synthesized using biomineralized precipitation from solutions of CaCl2 and Na2CO3. An impact of the low concentration of the embedded CaCO3 NPs on cell adhesion and growth depends strongly on the type of studied cell line: keratinocytes (HaCaT), melanoma (WM35) and osteoblastic (MC3T3-e1). Based on the temperature-responsive properties of grafted brush coatings and CaCO3 NPs acting as biologically active substrate, we hope that our research will lead to a new platform for tissue engineering with modified growth of the cells due to the release of biologically active substances from CaCO3 NPs and the ability to detach the cells in a controlled manner using temperature-induced changes of the brush.

Controlling orientation, conformation, and biorecognition of proteins on silane monolayers, conjugate polymers, and thermo-responsive polymer brushes: investigations using TOF-SIMS and principal component analysis

Control over orientation and conformation of surface-immobilized proteins, determining their biological activity, plays a critical role in biointerface engineering. Specific protein state can be achieved with adjusted surface preparation and immobilization conditions through different types of protein-surface and protein-protein interactions, as outlined in this work. Time-of-flight secondary ion mass spectroscopy, combining surface sensitivity with excellent chemical specificity enhanced by multivariate data analysis, is the most suited surface analysis method to provide information about protein state. This work highlights recent applications of the multivariate principal component analysis of TOF-SIMS spectra to trace orientation and conformation changes of various proteins (antibody, bovine serum albumin, and streptavidin) immobilized by adsorption, specific binding, and covalent attachment on different surfaces, including self-assembled monolayers on silicon, solution-deposited polythiophenes, and thermo-responsive polymer brushes. Multivariate TOF-SIMS results correlate well with AFM data and binding assays for antibody-antigen and streptavidin-biotin recognition. Additionally, several novel extensions of the multivariate TOF-SIMS method are discussed.

Graphical abstract

Grafted polymer brush coatings for growth of cow granulosa cells and oocyte-cumulus cell complexes

In the present work, three types of grafted brush coatings [P4VP, POEGMA246, and P(4VP-co-POEGMA246)] were successfully fabricated using graft polymerization of monomers "from the surface." The composition, thickness, and morphology of the grafted brush coatings were analyzed by TOF-SIMS, ellipsometry, and AFM, respectively. The chemical nature of the polymer surface plays a crucial role in the growth and development of the cow granulosa cells and, therefore, also oocyte-cumulus complexes. In comparison with other coatings, the P(4VP-co-POEGMA246) copolymer coating enables the formation of dispersed and small but numerous cell conglomerates and high cumulus expansion in oocyte-cumulus complexes with highly homogeneous cumulus layers surrounding the oocytes. Moreover, the cellular oxygen uptake for this coating in the presence of NaF (inhibitor glycolysis) was stimulated. This new (4VP-co-POEGMA246) copolymer nanostructured coating is a promising material for granulosa cell and oocyte-cumulus complex cultivation and possibly will have great potential for applications in veterinary and reproductive medicine.

Pentaerythritol: A Versatile Substrate in Organic Transformations, Centralization on the Reaction Medium

BACKGROUND

Pentaerythritol (2,2-bis (hydroxymethyl) propane-1,3-diol) as white crystalline odorless solid has been synthesized in 1891. Pentaerythritol is multifaceted species in many compounds, which are wildly utilized in medicine and industry. Also, multicomponent reactions (MCRs) play a crucial role in organic and medicinal chemistry. Hence, in these reactions, pentaerythritol is a versatile substrate for the synthesis of many polyfunctionalized products, because of the presence of the neopentane core and one hydroxyl group in each of the four terminal carbons.

OBJECTIVE

The review describes pentaerythritol multicomponent reactions in the presence of different solvents in the reaction medium to produce various compounds including pentaerythritols. This review covers the literature relevant up to 2018.

CONCLUSION

It is obvious from the provided review that a great deal of research has been done in this field, utilizing various mediums (solvent-free conditions, aqueous media, and organic solvents) for the synthesis of the products of containing pentaerythritols. This classification is based on the importance of economic and environmental friendly reactions. Due to the whole aforesaid reports, some reactions required heat for their progress, and some others were accompanied by microwave or ultrasonic waves.

"Command" surfaces with thermo-switchable antibacterial activity

In the presented work "smart" antibacterial surfaces based on silver nanoparticles (AgNPs) embedded in temperature-responsive poly(di(ethylene glycol)methyl ether methacrylate) - (POEGMA188) as well as poly(4-vinylpyridine) - (P4VP) coatings attached to a glass surface were successfully prepared. The composition, thickness, morphology and wettability of the resulting coatings were analyzed using ToF-SIMS, XPS, EDX, ellipsometry, AFM, SEM and CA measurements, respectively. Temperature-switched killing of the bacteria was tested against Escherichia coli ATCC 25922 (representative of Gram-negative bacteria) and Staphylococcus aureus ATCC 25923 (representative of Gram-positive bacteria) at 4 and 37 °C. In general at 4 °C no significant difference was observed between the amounts of bacteria accounted on the grafted brush coatings and within the control sample. In contrast, at 37 °C almost no bacteria were visible for temperature-responsive coating with AgNPs, whereas the growth of bacteria remains not disturbed for "pure" coating, indicating strong temperature-dependent antibacterial properties of AgNPs integrated into brushes.

Boron Nitride Nanosheets/PNIPAM Hydrogels with Improved Thermo-Responsive Performance

Thermo-responsive hydrogel is an important smart material. However, its slow thermal response rate limits the scope of its applications. Boron nitride nanosheet-reinforced thermos-responsive hydrogels, which can be controlled by heating, were fabricated by in situ polymerization of N-isopropylacrylamide in the presence of boron nitride nanosheets. The hydrogels exhibit excellent thermo-responsiveness and much enhanced thermal response rate than that of pure poly(N-isopropylacrylamide) hydrogels. Interestingly, the hydrogels can be driven to move in aqueous solution by heating. Importantly, the composite hydrogel is hydrophilic at a temperature below lower critical solution temperature (LCST), while it is hydrophobic at a temperature above LCST. Therefore, it can be used for quick absorption and release of dyes and oils from water. All these properties demonstrate the potential of hydrogel composites for water purification and treatment.

Composition, thickness and properties of grafted copolymer brush coatings determined by ellipsometry: calculation and prediction

The composition, thickness and properties of poly(4-vinylpyridine-co-oligo(ethylene glycol)ethyl ether methacrylate246) [P(4VP-co-OEGMA246)] copolymer grafted brush coatings attached to glass were studied in the dry and swollen states using ellipsometry. These measured data are in good agreement with predicted (estimated) changes in the amount of water, refractive index and thickness of the grafted copolymer brush coatings on swelling. For POEGMA brushes the thickness of the coatings on swelling at 20 °C can be more than double, in contrast to P4VP where those changes are insignificant. The presence of 4VP units in the structure of the P(4VP-co-OEGMA246) copolymer grafted brushes significantly decreases the hydration degree even for coatings with very low concentrations of 4VP units.

Temperature-Controlled Three-Stage Switching of Wetting, Morphology, and Protein Adsorption

The novel polymeric coatings of oligoperoxide-graft-poly(4-vinylpyridine-co-oligo(ethylene glycol)ethyl ether methacrylate246) [oligoperoxide-graft-P(4VP-co-OEGMA246)] attached to glass were successfully fabricated. The composition, thickness, morphology, and wettability of resulting coatings were analyzed using X-ray photoelectron spectroscopy, ellipsometry, atomic force microscopy, and contact angle measurements, respectively. In addition, adsorption of the bovine serum albumin was examined with fluorescence microscopy. The thermal response of wettability and morphology of the coatings followed by that of protein adsorption revealed two distinct transitions at 10 and 23 °C. For the first time, three stage switching was observed not only for surface wetting but also for morphology and protein adsorption. Moreover, the influence of the pH on thermo-sensitivity of modified surfaces was shown.

Protein adsorption and desorption behavior of a pH-responsive membrane based on ethylene vinyl alcohol copolymer

The pH-responsive protein adsorption and desorption of a poly(DMAEMA)-grafted EVAL membrane was observed.

Cholesterol-Based Grafted Polymer Brushes as Alignment Coating with Temperature-Tuned Anchoring for Nematic Liquid Crystals

Novel alignment coating with temperature-tuned anchoring for nematic liquid crystals (NLCs) was successfully fabricated in three step process, involving polymerization of poly(cholesteryl methacrylate) (PChMa) from oligoproxide grafted to the glass surface premodified with 3-aminopropyltriethoxysilane. Molecular composition, thickness, wettability of the PChMa coating and its alignment action for a NLC were examined with time of flight-secondary ion mass spectrometry, ellipsometry, contact angle measurements, polarization optical microscopy and commercially produced PolScope technique allowing for mapping of the optic axis and optical retardance within the microscope field view. We find that the PChMa coating provides a specific monotonous increase (decrease) in the tilt angle of the NLC director with respect to the substrates normal upon heating (cooling) referred to as anchoring tuning.

Control of Protein Affinity of Bioactive Nanocellulose and Passivation Using Engineered Block and Random Copolymers

We passivated TEMPO-oxidized cellulose nanofibrils (TOCNF) toward human immunoglobulin G (hIgG) by modification with block and random copolymers of poly(2-(dimethylamino)ethyl methacrylate) (PDMAEMA) and poly(oligo(ethylene glycol) methyl ether methacrylate) (POEGMA). The block copolymers reversibly adsorbed on TOCNF and were highly effective in preventing nonspecific interactions with hIgG, especially if short PDMAEMA blocks were used. In such cases, total protein rejection was achieved. This is in contrast to typical blocking agents, which performed poorly. When an anti-human IgG biointerface was installed onto the passivated TOCNF, remarkably high affinity antibody-antigen interactions were observed (0.90 ± 0.09 mg/m(2)). This is in contrast to the nonpassivated biointerface, which resulted in a significant false response. In addition, regeneration of the biointerface was possible by low pH aqueous wash. Protein A from Staphylococcus aureus was also utilized to successfully increase the sensitivity for human IgG recognition (1.28 ± 0.11 mg/m(2)). Overall, the developed system based on TOCNF modified with multifunctional polymers can be easily deployed as bioactive material with minimum fouling and excellent selectivity.

Water-dispersed thermo-responsive boron nitride nanotubes: synthesis and properties

In this study, water-dispersed thermo-responsive boron nitride nanotubes (BNNTs) were prepared in a simple two-step process, where on the first step oligoperoxide was grafted via the interaction of amino groups (defects) of BNNTs with pyromellitic chloroanhydride fragments in oligoperoxide molecules. The second step involves N-isopropylacrylamide (NIPAM) graft polymerization 'from the surface' of oligoperoxide-functionalized BNNTs resulting in poly(N-isopropylacrylamide) (PNIPAM) coating. The pristine and functionalized BNNTs were characterized by thermogravimetric analysis, Fourier transform infrared spectroscopy, ultraviolet-visible spectrophotometry, dynamic light scattering, scanning electron microscopy and atomic force microscopy. PNIPAM-functionalized BNNTs exhibit excellent dispersibility in water and possess thermo-responsive properties. The water-dispersion of thermo-responsive PNIPAM-functionalized BNNTs can help their potential use in biomedical applications as 'smart' surfaces, nanotransducers and nanocarriers.

Investigation of abnormal thermoresponsive PVDF membranes on casting solution, membrane morphology and filtration performance

A temperature sensitive casting solution of P(OEGMA-co-VTMOS) was prepared via an in situ polymerization method. Meanwhile, an interesting thermoresponsive PVDF membrane was obtained from the temperature sensitive casting solution.

Temperature-responsive properties of poly(4-vinylpyridine) coatings: influence of temperature on the wettability, morphology, and protein adsorption

Poly(4-vinylpyridine)-grafted brushes demonstrate a thermal response of their wettability (stronger than that for spin-coated films), surface morphology, and protein adsorption.

Synthesis and Postpolymerization Modification of Thermoresponsive Coatings Based on Pentaerythritol Monomethacrylate: Surface Analysis, Wettability, and Protein Adsorption

Properties of novel temperature-responsive hydroxyl-containing poly(pentaerythritol monomethacrylate) (PPM) coatings, polymerized from oligoperoxide grafted to glass surface premodified with (3-aminopropyl)triethoxysilane, are presented. Molecular composition, chemical state, thickness, and wettability are examined with time of flight-secondary ion mass spectrometry (ToF-SIMS), X-ray photoelectron spectroscopy (XPS), ellipsometry, and contact angle measurements, respectively. Temperature-induced changes in hydrophobicity of grafted PPM brushes are revealed by water contact angle and ellipsometric measurements. Partial postpolymerization modification of hydroxyl groups (maximum a few percent), performed with acetyl chloride or pyromellitic acid chloride, is demonstrated to preserve thermal response of coatings. Adsorption of bovine serum albumin to PPM brushes, observed with fluorescence microscopy, is higher than on glass in contrast to similar hydroxyl-containing layers reported as nonfouling. Enhanced and temperature-controlled protein adsorption is obtained after postpolymerization modification with pyromellitic acid chloride.

Method for determination of the parameters of transparent ultrathin films deposited on transparent substrates under conditions of low optical contrast

In the present work we suggest an original ellipsometric technique for independently determining strongly correlated refractive index and thickness of transparent ultrathin films. We demonstrate significant accuracy improvement for the single-wavelength null-ellipsometry measurements when using multiple incidence angles for the system "transparent film on a transparent substrate" studied in the thickness range of 1.0-20.0 nm and the low-contrast region for the film-substrate surface. A straightforward relationship is obtained between the refractive index n(1) of the transparent film and the incidence angle φ. It follows from invariability ensured for the amplitude ellipsometric parameter Ψ with respect to the film thickness changes.

Conductive surfaces with dynamic switching in response to temperature and salt

Salt- and temperature-responsive P(PEGMMA)-based brushes were grafted from conducting polymer films to produce electroactive surfaces with tailored switching behaviour.

Synthesis of well dispersed polymer grafted metal–organic framework nanoparticles

We prepared novel polymer grafted MOF nanoparticles for the first time with excellent water dispersity and significantly enhanced catalytic effect.

Antibiofouling polymer interfaces: poly(ethylene glycol) and other promising candidates

This review highlights antibiofouling polymer interfaces with emphasis on the latest developments using poly(ethylene glycol) and the design new polymeric structures.

Temperature-responsive peptide-mimetic coating based on poly(N-methacryloyl-l-leucine): properties, protein adsorption and cell growth

Poly(N-methacryloyl-l-leucine) (PNML) coatings were successfully fabricated via polymerization from peroxide initiator grafted to premodified glass substrate. Chemical composition and thickness of PNML coatings were determined using time of flight-secondary ion mass spectrometry (TOF- SIMS) and ellipsometry, respectively. PNML coatings exhibit thermal response of the wettability, between 4 and 28°C, which indicates a transition between hydrated loose coils and hydrophobic collapsed chains. Morphology of the PNML coating was observed with the AFM, transforming with increasing temperature from initially relatively smooth surface to rough and more structured surface. Protein adsorption observed by fluorescence microscopy for model proteins (bovine serum albumin and lentil lectin labeled with fluorescein isothiocyanate) at transition from 5 to 25°C, showed high affinity of PNML coating to proteins at all investigated temperatures and pH. Thus, PNML coating have significant potential for medical and biotechnological applications as protein capture agents or functional replacements of antibodies ("plastic antibodies"). The high proliferation growth of the human embryonic kidney cell (HEK 293) onto PNML coating was demonstrated, indicating its excellent cytocompatibility.