The effect of chitin nanoparticles on surface behavior of DPPC/DPPG Langmuir monolayers

Effects of Different Concentrations of AmB on the Unsaturated Phospholipid-Cholesterol Membrane Using the Langmuir Monolayer and Liposome Models

Amphotericin B (AmB) causes toxicity to the erythrocyte membrane, leading to hemolysis, which limits the clinically effective dose for AmB intravenous therapy in invasive fungal infections. The molecular mechanism by which AmB adheres to the membrane of erythrocytes is the key factor in causing AmB to be toxic to the membrane of erythrocytes, but it is not yet fully understood; the mechanism by which AmB adheres to the liquid microdomains with higher fluidity formed by cholesterol and unsaturated phospholipids remains especially unclear. This study examined the adsorption of AmB at different concentrations, 5, 45, 85, and 125 μg/mL, on unsaturated phospholipid membranes containing 50 mol% cholesterol. The thermodynamic properties and structure of DOPC monolayers and DOPC/cholesterol mixed monolayers at different concentrations of AmB have been investigated using the Langmuir monolayer model and the BAM method. The impact of varying concentrations of AmB on the hydrophilic and hydrophobic domains of the DOPC bilayers and the DOPC/cholesterol mixed bilayers have also been discussed using large unilamellar vesicle liposomes and fluorescence techniques. It is shown that for AmB concentrations greater than 5 μg/mL, with an increase in AmB's concentration, the reorganization time for the DOPC/cholesterol monolayer increases, and the elastic modulus of the DOPC/cholesterol mixed monolayer decreases. In particular, when AmB's concentration is higher than 85 μg/mL, the liquid-condensed phase domains on the DOPC/cholesterol monolayer reduce significantly and the liquid-expanded phase domain enlarges from the BAM images. When the AmB concentration reaches 5 μg/mL, the disorder of the hydrophobic and hydrophilic domains of the DOPC/cholesterol bilayer increases as the AmB concentration increases. The way in which AmB interacts with the DOPC/cholesterol mixed membrane is related to the concentration of AmB. The higher the concentration of AmB, the more likely it is to remove cholesterol from the unsaturated phospholipid membrane. The results are helpful to understand the mechanism of AmB's toxicity to the erythrocyte's membrane, which has a guiding value for seeking ways to reduce the AmB's toxicity.

Effect of high sodium ion level on the interaction of AmB with a cholesterol-rich phospholipid monolayer

Invasive fungal infections are a primary reason for high mortality in immunocompromised people, especially in critically ill patients, such as intensive care unit (ICU) patients, advanced cancer patients, or severe burn patients. Hypernatremia also can increase mortality in severely ill patients. Amphotericin B (AmB) is the gold standard for treating infections, but in severely ill patients, AmB can cause hematotoxicity when administered intravenously due to its interaction with cholesterol on red blood cell membranes. This results in limited doses of AmB and affects the treatment of infections. The proportion of cholesterol molecules in membrane lipids in red blood cells is as high as 50 mol%, and the sodium ions can influence the interaction between AmB and lipids on the membrane. Therefore, in the complex clinical situation of a severely ill patient with a fungal infection and hypernatremia, the interaction between amphotericin B and the red blood cell membranes is worth studying in depth. In this work, the interaction between AmB and the dipalmitoyl phosphatidylcholine (DPPC)/cholesterol mixed monolayer in the presence of high sodium ion levels was studied when the proportion of cholesterol was 50%. The results show that the effect of AmB on reducing the monolayer's area at a high level of sodium ions is slightly stronger at 30 mN/m. The effect of AmB on reducing the elastic modulus of the DPPC/Chol monolayer is significantly weakened by a high sodium ion level, compared with the level of sodium ions at normal physiological concentration. The higher the sodium ion concentration, the weaker the intermolecular force of the DPPC/Chol/AmB mixed monolayers. The scanning electron microscope (SEM) and atomic force microscopy (AFM) observations suggest that at a high sodium ion level, the presence of AmB significantly reduces the surface roughness of the DPPC/Chol monolayer. AmB may bind to cholesterol molecules, and it isolates cholesterol from the monolayer, resulting in a reduced height of the cholesterol-rich monolayer and an increasingly dispersed monolayer region. The results are beneficial to understanding the mechanism of impact of a high sodium ion level on the relationship between AmB and red blood cell membranes rich in cholesterol and are valuable for understanding the hemolytic toxicity of AmB to red blood cells at a high sodium ion level.

Effect of Amphotericin B on the Thermodynamic Properties and Surface Morphology of the Pulmonary Surfactant Model Monolayer during Respiration

During the COVID-19 pandemic, the treatment of pulmonary fungal infection faced noteworthy challenges. Amphotericin B has shown promising therapeutic effects as an inhalation treatment for pulmonary fungal infections, especially those associated with the COVID-19 virus, due to its rare resistance. However, because the drug frequently produces renal toxicity, its effective dose is limited in clinical use. In this work, the DPPC/DPPG mixed monolayer was used as the pulmonary surfactant monolayer to study the interaction between amphotericin B and the pulmonary surfactant monolayer during inhalation therapy using the Langmuir technique and atomic force microscopy. The effects of different molar ratios of AmB on the thermodynamic properties and surface morphology of the pulmonary surfactant monolayer at different surface pressures was evaluated. The results showed that when the molar ratio of AmB to lipids in the pulmonary surfactant was less than 1:1, the main intermolecular force was attractive at a surface pressure greater than 10 mN/m. This drug had little effect on the phase transition point of the DPPC/DPPG monolayer, but decreased the height of the monolayer at 15 mN/m and 25 mN/m. When the molar ratio of AmB to lipids was greater than 1:1, the intermolecular force was mainly repulsive at a surface pressure greater than 15 mN/m, and AmB increased the height of the DPPC/DPPG monolayer at both 15 mN/m and 25 mN/m. These results are helpful in understanding the interaction between the pulmonary surfactant model monolayer and different doses of drugs at various surface tensions during respiration.

Effect of Trastuzumab on the thermodynamic behavior and roughness of fluid membrane using unsaturated phospholipid/cholesterol mixed monolayer model

The microenvironment near the receptor on biological membrane plays an important role in regulating drug-receptor interaction, and the interaction between drugs and lipids on membrane can also affect the microenvironment of membrane, which may affect drugs' efficacy or cause the drug resistance. Trastuzumab (Tmab) is a monoclonal antibody, used to treat early breast cancer associated with the overexpression of Human Epidermal growth factor Receptor 2 (HER2). But its effectiveness is limited due to its tendency to make tumor cells resistant to the drug. In this work, the monolayer mixed by unsaturated phospholipids (DOPC, DOPE and DOPS) and cholesterol were used as a model to simulate the fluid membrane region on biological membrane. The phospholipid/cholesterol mixed monolayers in molar ratio 7:3 and 1:1, were respectively used to simulate the one layer of simplified normal cell membrane and tumor cell membrane. The influence of this drug on the phase behavior, elastic modulus, intermolecular force, relaxation and the surface roughness of the unsaturated phospholipid/cholesterol monolayer was investigated. The results show that at 30 mN/m the increase or decrease of the elastic modulus and surface roughness of the mixed monolayer caused by Tamb depends on the type of phospholipid, but the intensity of the effect depends on the content of cholesterol, and the intensity of influence is more significant at the presence of 50% cholesterol. However, the effect of Tmab on the ordering of the DOPC/cholesterol or DOPS/cholesterol mixed monolayer is stronger when the content of cholesterol is 30%, but it was stronger for the DOPE/cholesterol mixed monolayer when the content of cholesterol is 50%. This study is helpful to understand the effects of anticancer drugs on microenvironment of cell membrane, and it has a certain reference value for the design of drug delivery system and drug target identification.

The effects of size and surface functionalization of polystyrene nanoplastics on stratum corneum model membranes: An experimental and computational study

Nanoplastics are mainly generated from the decomposition of plastic waste and artificial production and have attracted much attention due to their wide distribution in the environment and the potential risk for humans. As the largest organ of the human body, the skin is inevitably in contact with nanoplastics. Stratum corneum is the first barrier when the skin is exposed to nanoplastics. However, little is known about the interactions between nanoplastics and stratum corneum. Here, the effects of particle size and surface functionalization (amino-modified and carboxy-modified) of polystyrene nanoplastics on the stratum corneum models were studied by Langmuir monolayer and molecular dynamics simulations. An equimolar mixture of ceramide/cholesterol/free fatty acid was used to mimic stratum corneum intercellular lipids. The Langmuir monolayer studies demonstrated that the larger size and surface functionalization of polystyrene nanoplastics significantly reduced the stability of stratum corneum lipid monolayer in a concentration-dependent fashion. Simulation results elucidated that functionalized polystyrene oligomers had a stronger interaction with lipid components of the stratum corneum model membrane. The cell experiments also indicated that functionalized polystyrene nanoplastics, especially for amino-modified polystyrene nanoplastics, had significant cytotoxicity on normal human dermal fibroblast cells. Our results provide fundamental information and the basis for a deeper understanding of the health risks of nanoplastics to humans.

Regulation of calcium ions on the interaction between amphotericin B and cholesterol-rich phospholipid monolayer in LE phase and LC phase

Amphotericin B, as a "gold standard", is used to treat invasive fungal infections. The AmB molecule can bind easily to cholesterol and damage cell membranes, so it produces the toxicity on cell membrane, which limits its clinical dose. However, the interaction between AmB and cholesterol-rich membrane is unclear now. The phase state of the membrane and the metal cation outside cell membrane may affect the interaction between AmB and the membrane. In this work, the effects of amphotericin B on the mean molecular area, elastic modulus and stability of mammalian cell membrane rich in cholesterol in the presence of Ca²⁺ ions were studied using DPPC/Chol mixed Langmuir monolayer as a model. The Langmuir-Blodgett method and AFM test were used to study the effects of this drug on the morphology and height of cholesterol-rich phospholipid membrane in the presence of Ca²⁺ ions. The influence of calcium ions on the mean molecular area and the limiting molecular area was similar in LE phase and in LC phase. The calcium ions made the monolayer more condensed. However, calcium ions can weaken the shortening effect of AmB on the relaxation time of the DPPC/Chol mixed monolayer in LE phase but enhance it in LC phase. Interestingly, calcium ions caused a LE-LC coexistence phase to occur in the DPPC/Chol/AmB mixed monolayers at 35mN/m, which was confirmed by atomic force microscopy. The results can help to understand the interaction between amphotericin B and cell membrane rich in cholesterol in the calcium ions environment.

Effect of Fluoxetine on the Surface Behavior of the Lipid Monolayers at Different Surface Pressures

Fluoxetine (FLX), used in the clinic to treat depression, is a well-known cationic amphiphilic antidepressant. However, there is a lack of research on the effect of FLX on the surface behavior of lipid monolayers under different surface pressures. In this study, 1,2-dipalmitoyl-sn-glycero-3-phosphocholine/1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine/CHOL (DPPC/POPC/CHOL) monolayers were prepared via the Langmuir method, and FLX was added to these monolayers under various surface pressures. The effect of FLX on the surface behavior of DPPC/POPC/CHOL monolayers under various surface pressures was studied using a combination of surface pressure-area isotherms, compressibility modulus-surface pressure curves, and atomic force microscope (AFM). The results showed that the effect of FLX on the lipid monolayers was different under different surface pressures. The interaction between FLX and lipid molecules was weak under low surface pressures, and FLX could easily intercalate between the lipid molecules to inhibit monolayer phase transition. The interaction between FLX and lipid molecules was enhanced and FLX tended to self-aggregate to reduce the monolayer stability when the surface pressure was high. This study lays the foundation for further studies on the interaction between FLX and lipid monolayers.

Influence of InP/ZnS Quantum Dots on Thermodynamic Properties and Morphology of the DPPC/DPPG Monolayers at Different Temperatures

In this work, the effects of InP/ZnS quantum dots modified with amino or carboxyl group on the characteristic parameters in phase behavior, elastic modulus, relaxation time of the DPPC/DPPG mixed monolayers are studied by the Langmuir technology at the temperature of 37, 40 and 45 °C. Additionally, the information on the morphology and height of monolayers are obtained by the Langmuir-Bloggett technique and atomic force microscope technique. The results suggest that the modification of the groups can reduce the compressibility of monolayers at a higher temperature, and the most significant effect is the role of the amino group. At a high temperature of 45 °C, the penetration ability of InP/ZnS-NH₂ quantum dots in the LC phase of the mixed monolayer is stronger. At 37 °C and 40 °C, there is no clear difference between the penetration ability of InP/ZnS-NH₂ quantum dots and InP/ZnS-COOH quantum dots. The InP/ZnS-NH₂ quantum dots can prolong the recombination of monolayers at 45 °C and accelerate it at 37 °C and 40 °C either in the LE phase or in the LC phase. However, the InP/ZnS-COOH quantum dots can accelerate it in the LE phase at all temperatures involved but only prolong it at 45 °C in the LC phase. This work provides support for understanding the effects of InP/ZnS nanoparticles on the structure and properties of cell membranes, which is useful for understanding the behavior about the ingestion of nanoparticles by cells and the cause of toxicity.

Fluid Films as Models for Understanding the Impact of Inhaled Particles in Lung Surfactant Layers

Pollution is currently a public health problem associated with different cardiovascular and respiratory diseases. These are commonly originated as a result of the pollutant transport to the alveolar cavity after their inhalation. Once pollutants enter the alveolar cavity, they are deposited on the lung surfactant (LS) film, altering their mechanical performance which increases the respiratory work and can induce a premature alveolar collapse. Furthermore, the interactions of pollutants with LS can induce the formation of an LS corona decorating the pollutant surface, favoring their penetration into the bloodstream and distribution along different organs. Therefore, it is necessary to understand the most fundamental aspects of the interaction of particulate pollutants with LS to mitigate their effects, and design therapeutic strategies. However, the use of animal models is often invasive, and requires a careful examination of different bioethics aspects. This makes it necessary to design in vitro models mimicking some physico-chemical aspects with relevance for LS performance, which can be done by exploiting the tools provided by the science and technology of interfaces to shed light on the most fundamental physico-chemical bases governing the interaction between LS and particulate matter. This review provides an updated perspective of the use of fluid films of LS models for shedding light on the potential impact of particulate matter in the performance of LS film. It should be noted that even though the used model systems cannot account for some physiological aspects, it is expected that the information contained in this review can contribute on the understanding of the potential toxicological effects of air pollution.

Potential hazards associated with interactions between diesel exhaust particulate matter and pulmonary surfactant

Long term exposure to diesel exhaust particulate matter (DEPM) can induce numerous adverse health effects to the respiratory system. Understanding the interaction between DEPM and pulmonary surfactant (PS) can be an essential step toward preliminary evaluation of the impact of DEPM on pulmonary health. Herein, DEPM was explored for its interaction with 1,2-dipalmitoyl-sn-glycerol-3-phosphocholine (DPPC), the major component of PS. The results indicated that the surface pressure-area (π-A) isotherms of DPPC monolayers shifted toward lower molecular areas and the compression modulus (C_S^-1) reduced in the presence of DEPM. Atomic force microscopy image showed that DEPM can disrupt the ultrastructure of DPPC monolayers along with the direction of lateral compression. In addition, DPPC can in turn condition the surface properties of DEPM, permitting its agglomeration in aqueous media, which was attributed to the adsorption of DEPM to DPPC. Furthermore, the particle-bound polycyclic aromatic hydrocarbons (PAHs) could be desorbed from DEPM by the solubilization of DPPC and it was positively correlated with the hydrophobicity of PAHs. These findings revealed the toxicity of DEPM-associated PAHs and the role of DPPC in facilitating the removal of the inhaled particles, which can provide a new insight into the potential hazards of airborne particles on lung health.

Effects of Carboxyl or Amino Group Modified InP/ZnS Nanoparticles Toward Simulated Lung Surfactant Membrane

Quantum dots (QDs) as a promising optical probe have been widely used for in vivo biomedical imaging; especially enormous efforts recently have focused on the potential toxicity of QDs to the human body. The toxicological effects of the representative InP/ZnS QDs as a cadmium-free emitter are still in the early stage and have not been fully unveiled. In this study, the DPPC/DPPG mixed monolayer was used to simulate the lung surfactant monolayer. The InP/ZnS-COOH QDs and InP/ZnS-NH₂ QDs were introduced to simulate the lung surfactant membrane's environment in the presence of InP/ZnS QDs. The effects of InP/ZnS QDs on the surface behavior, elastic modulus, and stability of DPPC/DPPG mixed monolayer were explored by the surface pressure-mean molecular area isotherms and surface pressure-time curves. The images observed by Brewster angle microscope and atomic force microscope showed that the InP/ZnS QDs affected the morphology of the monolayer. The results further demonstrated that the InP/ZnS QDs coated with different surface groups can obviously adjust the mean molecular area, elastic modulus, stability, and microstructure of DPPC/DPPG mixed monolayer. Overall, this work provided useful information for in-depth understanding of the effects of the -COOH or -NH₂ group coated InP/ZnS QDs on the surface of lung surfactant membrane, which will help scientists to further study the physiological toxicity of InP/ZnS QDs to lung health.

Effect of fluoxetine at different concentrations on the adsorption behavior of Langmuir monolayers

Fluoxetine (FLX), approved for the treatment of depression and anxiety by the FDA in 2002, is an amphiphilic antidepressant. In general, amphiphilic drugs have high membrane permeability. Therefore, the interactions between these drugs and monolayers have been widely concerned. In this study, the adsorption of FLX on dipalmitoylphosphatidylcholine (DPPC) monolayers at different concentrations and surface pressures have been investigated by pressure-area isotherms (π-A), adsorption curves, compression-expansion curves, and atomic force microscopy (AFM). Our data showed that the adsorption behavior was related to the surface pressures and FLX concentrations in the subphase. The FLX that was added in the subphase under lower surface pressure (π = 10 mN/m) was easily adsorbed on DPPC monolayers. The stability of the monolayers was strong. The adsorption of FLX on DPPC monolayers and the stability decreased when π = 20 mN/m. In addition, the adsorption behavior and stability increased with increasing FLX concentrations. The AFM images of the monolayers confirmed the results of fitted adsorption curves. This study will be critical to our understanding of the interactions between drugs and lipid monolayers.

Effect of Hyaluronic Acid and Pluronic-F68 on the Surface Properties of Foam as a Delivery System for Polidocanol in Sclerotherapy

The use of foams to deliver bioactive agents and drugs is increasing in pharmaceutics. One example is the use of foam as a delivery system for polidocanol (POL) in sclerotherapy, with the addition of bioactive compounds to improve the delivery system being a current subject of study. This work shows the influence of two bioactive additives on the structure and stability of POL foam: hyaluronic acid (HA) and Pluronic-F68 (F68). HA is a natural non-surface-active biopolymer present in the extracellular matrix while F68 is a surface-active poloxamer that is biocompatible with plasma-derived fluids. Both additives increase the bulk viscosity of the sample, improving foam stability. However, HA doubled and F68 quadruplicated the foam half lifetime of POL. HA reduced the size and polydispersity of the bubble size distribution and increased the surface elasticity with respect to POL. Both facts have a positive impact in terms of foam stability. F68 also altered bubble structure and increased surface elasticity, again contributing to the enhancement of foam stability. The surface characterization of these systems is important, as in foam sclerotherapy it is crucial to assure the presence of POL at the surface of the bubbles in order to deliver the sclerosant agent in the target vein.

Interactions of particulate matter and pulmonary surfactant: Implications for human health

Particulate matter (PM), which is the primary contributor to air pollution, has become a pervasive global health threat. When PM enters into a respiratory tract, the first body tissues to be directly exposed are the cells of respiratory tissues and pulmonary surfactant. Pulmonary surfactant is a pivotal component to modulate surface tension of alveoli during respiration. Many studies have proved that PM would interact with pulmonary surfactant to affect the alveolar activity, and meanwhile, pulmonary surfactant would be adsorbed to the surface of PM to change the toxic effect of PM. This review focuses on recent studies of the interactions between micro/nanoparticles (synthesized and environmental particles) and pulmonary surfactant (natural surfactant and its models), as well as the health effects caused by PM through a few significant aspects, such as surface properties of PM, including size, surface charge, hydrophobicity, shape, chemical nature, etc. Moreover, in vitro and in vivo studies have shown that PM leads to oxidative stress, inflammatory response, fibrosis, and cancerization in living bodies. By providing a comprehensive picture of PM-surfactant interaction, this review will benefit both researchers for further studies and policy-makers for setting up more appropriate regulations to reduce the adverse effects of PM on public health.

Langmuir films of low-dimensional nanomaterials

A large number of low-dimensional nanomaterials having different shapes and being dispersible in solvents open a fundamental question if there is a universal deposition technique for the monolayer formation. A monolayer formation of various nanomaterials at the air-water interface, also known as a Langmuir film, is a well-established technique even for the large group of the recently developed low-dimensional nanomaterials. In this review, we cover the monolayer formation of the zero-dimensional, one-dimensional and two-dimensional nanomaterials. Thanks to the formation of a Langmuir layer at the thermodynamic equilibrium, by using a suitable nanomaterial dispersion and subphase, the monolayers can be formed from all kinds of materials, ranging from the graphene oxide to the semiconducting quantum dots. In this review, we will discuss the basic requirements for the successful formation of monolayers and summarize the recent scientific advances in the field of Langmuir films.

Studies on the interfacial behavior of DPPC/DPPG mixed monolayers in the presence of fluoxetine

In this study, the interfacial behavior of 1,2-dipalmitoyl-sn-glycero-3-phosphocholine/1,2-dipalmitoyl-sn-glycero-3-phospho-(1'-rac-glycerol) (DPPC/DPPG) mixed monolayers with fluoxetine (FLX) in the subphase was investigated by a combination of the Langmuir-Blodgett technique and atomic force microscopy (AFM). It was found that DPPC/DPPG mixed monolayers showed different interfacial behaviors before and after addition of FLX in the subphase. The electrostatic interaction between FLX and lipids molecules destroys the homogeneity of the mixed monolayers and changes the arrangement of lipids molecules at the interface after addition of FLX in the subphase, thereby leading to an increase of compressibility and miscibility and a decrease in the stability of the mixed monolayers. The surface morphology of the mixed monolayers observed by AFM was different between without and with FLX in the subphase, indicating the penetration of FLX into the mixed monolayers. The present study has provided detailed information for further understanding the interactions of drugs with membrane lipids in other lipid monolayers.

Adsorption behavior of DNA on phosphatidylcholine at the air-water interface

In this paper, the adsorption behavior of DNA on 1,2-dipalmitoyl-sn-glycero-3- phosphocholine (DPPC) and 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC) mixed lipid monolayers had been studied at the air-water interface through the surface pressure-area curves (π-A), adsorption curves (π/π₀-t), excess mean area (∆A_exc), excess Gibbs free energy (∆G_ex) and the atomic force microscopy (AFM). π-A isotherms showed that the curves moved to larger mean molecular area after DNA added into subphase, however, the curves shifted to smaller mean molecular area when the concentration of DNA was higher than 1.2 μg/mL. The result of adsorption curves indicated that DNA molecules were spread by combining with polar head groups of lipids except the concentration of DNA was 0.4 μg/mL. ∆A_exc and ∆G_ex demonstrated that DNA enlarged the interval between DPPC and POPC, and the strongest position happened at the concentration of DNA was 1.2 μg/mL. These phenomena might be the steric hindrance between DNA molecules. Morphology of surface observed by AFM was agreement with the results above, which verified our conclusion from a more intuitive aspect. This work provides useful theoretical basis for the development of novel DNA delivery materials.

Effect of Fe3O4 Nanoparticles on Mixed POPC/DPPC Monolayers at Air-Water Interface

Fe₃O₄ nanoparticles (NPs) as a commonly used carrier in targeted drug delivery are widely used to carry drugs for the treatment of diseases. However, the mechanism of action of between Fe₃O₄ NPs and biological membranes is still unclear. Therefore, this article reports the influence of hydrophilic and hydrophobic Fe₃O₄ NPs on mixed 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC) and 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) that were studied using the Langmuir-Blodgett (LB) film technique and an atomic force microscope (AFM). From surface pressure-area (π-A) isotherms, we have calculated the compression modulus. The results showed that hydrophobic Fe₃O₄ NPs enlarged the liquid-expanded (LE) and liquid-condensed (LC) phase of the mixed POPC/DPPC monolayers. The compressibility modulus of the mixed POPC/DPPC monolayer increases for hydrophilic Fe₃O₄ NPs, but the opposite happens for the hydrophobic Fe₃O₄ NPs. The adsorption of hydrophobic Fe₃O₄ NPs in mixed POPC/DPPC monolayers was much more than the hydrophilic Fe₃O₄ NPs. The interaction of hydrophilic Fe₃O₄ NPs with the head polar group of the mixed lipids increased the attraction force among the molecules, while the interaction of hydrophobic Fe₃O₄ NPs with the tail chain of the mixed lipids enhanced the repulsive force. The morphology of the monolayers was observed by AFM for validating the inferred results. This study is of great help for the application of Fe₃O₄ NPs in biological systems.

Folding of cytosine-based nucleolipid monolayer by guanine recognition at the air-water interface

Monolayers of a cytosine-based nucleolipid (1,2-dipalmitoyl-sn-glycero-3-(cytidine diphosphate) (ammonium salt), CDP-DG) at basic subphase have been prepared at the air-water interface both in absence and presence of guanine. The formation of the complementary base pairing is demonstrated by combining surface experimental techniques, i.e., surface pressure (π)-area (A), Brewster angle microscopy (BAM), infrared spectroscopy (PM-IRRAS) and computer simulations. A folding of the cytosine-based nucleolipid molecules forming monolayer at the air-water interface occurs during the guanine recognition as absorbate host and is kept during several compression-expansion processes under set experimental conditions. The specificity between nitrogenous bases has been also registered. Finally, mixed monolayers of CDP-DG and a phospholipid (1,2-dimyristoyl-sn-glycero-3-phosphate (sodium salt), DMPA) has been studied and a molecular segregation of the DMPA molecules has been inferred by the additivity rule.