What happens when pesticides are solubilized in nonionic surfactant micelles

Identification and characterization of a promiscuous metallohydrolase in metallo-β-lactamase superfamily from a locally isolated organophosphate-degrading Bacillus sp. strain S3wahi

In this present study, characteristics and structure-function relationship of an organophosphate-degrading enzyme from Bacillus sp. S3wahi were described. S3wahi metallohydrolase, designated as S3wahi-MH (probable metallohydrolase YqjP), featured the conserved αβ/βα metallo-β-lactamase-fold (MBL-fold) domain and a zinc bimetal at its catalytic site. The metal binding site of S3wahi-MH also preserves the H-X-H-X-D-H motif, consisting of specific amino acids at Zn1 (Asp69, His70, Asp182, and His230) and Zn2 (His65, His67, and His137). The multifunctionality of S3wahi-MH was demonstrated through a steady-state kinetic study, revealing its highest binding affinity (KM) and catalytic efficiency (kcat/KM) for OP compound, paraoxon, with values of 8.09 × 10-6 M and 4.94 × 105 M-1 s-1, respectively. Using OP compound, paraoxon, as S3wahi-MH native substrate, S3wahi-MH exhibited remarkable stability over a broad temperature range, 20 °C - 60 °C and a broad pH tolerance, pH 6-10. Corresponded to S3wahi-MH thermal stability characterization, the estimated melting temperature (Tm) was found to be 72.12 °C. S3wahi-MH was also characterized with optimum catalytic activity at 30 °C and pH 8. Additionally, the activity of purified S3wahi-MH was greatly enhanced in the presence of 1 mM and 5 mM of manganese (Mn2+), showing relative activities of 1323.68 % and 2073.68 %, respectively. The activity of S3wahi-MH was also enhanced in the presence of DMSO and DMF, showing relative activities of 270.37 % and 307.41 %, respectively. The purified S3wahi-MH retained >60 % residual activity after exposure to non-ionic Tween series surfactants. Nevertheless, the catalytic activity of S3wahi-MH was severely impacted by the treatment of SDS, even at low concentrations. Considering its enzymatic properties and promiscuity, S3wahi-MH emerges as a promising candidate as a bioremediation tool in wide industrial applications, including agriculture industry.

A novel amidine-based fluorescent probe TPE-4+ for rapid detection of anionic surfactant sodium dodecyl sulfate

An accurate, fast, and simple surfactant detection method is of great significance for monitoring surfactants pollution. Sodium dodecyl sulfate (SDS) is one of the most commonly used anionic surfactants and has been listed as an important monitoring pollutant for surfactant residues. Herein, a novel fluorescent probe named TPE-4+ with four amidines as the recognition functional group and tetraphenylethene as the fluorophore was fabricated. Due to the special intramolecular environment, the probe showed selectively identification towards SDS which made an aggregation induced fluorescence enhencement. Under the optimum conditions, the fluorescence enhencement of TPE-4+ is linearly related to the concentration of SDS in the range of 5.0-60.0 μM with limit of detection (LOD) of 0.010 μM and limit of quantification (LOQ) of 0.034 μM. Relative to the reported methods, the probe in our work showed better selectivity and sensitivity. The proposed method was successfully applied for the SDS determination of disinfecting bowls.

Effect of Different Ethylene Oxide Addition Numbers on the Performance of Polyoxyethylene Tallow Amine as a Pesticide Emulsifier

Surfactant reduces the surface tension of liquids, resulting in improved emulsion stability, and there is great interest in pesticide additives. Ethoxylate is often used as a pesticide emulsifier. However, the degree of ethoxylation and the existence of dioxane byproducts can significantly affect the performance of emulsifiers. Here, a series of polyoxyethylene tallow amines with the addition of different numbers of ethylene oxide (EO) were synthesized and characterized. Their physical and chemical performances were measured. The ability of POEA as a surfactant to reduce water surface tension and the surface adsorption of molecules were assessed based on the static and dynamic surface tensions. The results show that the surfactant molecules preferentially form a saturated adsorption layer in solution, and the mixed-diffusion-kinetics mechanism dominates the adsorption process. With the increase of the EO addition number, the emulsifying property of POEA increases, while the wetting property gradually decreases and the contact angle increases. These results can provide a basis for the selection of pesticide additives. At the same time, the mechanism of removing dioxane by ethoxylate is described, and a simple and low-consumption method is put forward to reduce the dioxane content. It provides a new idea for the removal of dioxane.

Unraveling How Membrane Nanostructure Changes Impact the Eye Irritation of Nonionic Alkyl Ethoxylate Surfactants

Nonionic surfactants used in agri-spraying processes may cause varying degrees of corneal irritation when they come in direct contact with farmers' eyes, and the exact irritations are thought to be determined by how surfactants interact with corneal cell membranes. However, how nonionic surfactants interact with cell membranes at the molecular and nano levels remains largely unexplored. In this study, the interactions between nonionic surfactants (alkyl ethoxylate, C12Em) and lipid membranes were examined by membrane permeability measurement, quartz crystal microbalance with dissipation, dual polarization interferometry, confocal laser scanning microscopy, and neutron reflection, aiming to reveal complementary structural features at the molecular and nano levels. Apart from the extremely hydrophobic surfactant C12E2, all nonionic surfactants studied could penetrate the model cell membrane composed of a phosphocholine lipid bilayer. Nonionic surfactants with intermediate amphiphilicity (C12E6) rapidly fused into the lipid membrane and stimulated the formation of pores across the lipid bilayer, consistent with the cytoplasm leakage and fast cell necrosis observed from the cytotoxicity study of corneal cells. In comparison, while hydrophobic and hydrophilic surfactants [those with long and short ethoxylates (C12E4,12,23)] could cause mild structural alteration to the outer lipid layer of the membrane, these structural changes were insufficient to elicit large cytoplasmic leakage rapidly and instead cell death occurred over longer periods of time due to changes in the membrane permeability. These results reveal the strong link of surfactant-lipid membrane interactions to surfactant cytotoxicity and the association with amphiphilicity of nonionic surfactants.

Advanced nanopesticides: Advantage and action mechanisms

The use of various chemical substances to control pests, diseases, and weeds in the field is a necessary part of the agricultural development process in every country. While the application of pesticides can improve the quality and yield of crops, plant resistance and the harm caused by pesticide residues to the environment and humans have led to the search for greener and safer pesticide formulations to improve the current situation. In recent years, nanopesticides (NPts) have shown great potential in agriculture due to their high efficiency, low toxicity, targeting, resistance, and controlled slow release demonstrated in the experimental stage. Commonly used approaches to prepare NPts include the use of nanoscale metal materials as active ingredients (AI) (ingredients that can play a role in insecticide, sterilization and weeding) or the construction of carriers based on commonly used pesticides to make them stable in nano-sized form. This paper systematically summarizes the advantages and effects of NPts over conventional pesticides, analyzes the formation and functions of NPts in terms of structure, AI, and additives, and describes the mechanism of action of NPts. Despite the feasibility of NPts use, there is not enough comprehensive research on NPts, which must be supplemented by more experiments in terms of biotoxicology and ecological effects to provide strong support for NPts application.

SANS contrast matching for the unambiguous localization of anionic dye in cationic surfactant micelles

Contrast variation in small-angle neutron scattering (SANS) was successfully applied to localize the anionic azo dye Blue in co-assemblies with the cationic surfactant dodecyltrimethylammoniumbromide (DTAB). For this purpose, the scattering contrast between DTAB and the aqueous solvent was eliminated by SANS contrast matching, leaving only the scattering signal from Blue to be detected. Results obtained by contrast matching were confirmed by NOESY NMR-spectroscopy, showing that Blue interacts with the positively charged DTAB head groups and with up to the 4th neighbouring methylene group of the DTAB C12-alkyl chain. Its localization in the outer layer of the Blue-DTAB co-assembly explains the uniaxial growth of spheroidal DTAB micelles to wormlike micelles with increasing [Blue] : [DTAB] ratio from 0 : 1 to 1 : 3. This is in line with the concept of the packing parameter for amphiphilic substances.

Effects of three surfactants on the degradation and environmental risk of metolachlor in aquatic environment

Surfactants and pesticides can be simultaneously detected in the environment by the reason of their widespread use and large amounts of emissions. Due to the special amphipathicity of surfactants, it may have special effects on the environmental behaviors and toxic effects of other substances in the environment. There are few relevant studies at present. In this study, the effects of three surfactants on the degradation of the amide pesticide metolachlor in water-sediment system were investigated. The study found that the three surfactants had no significant effect on the degradation of metolachlor in the system at environmental concentrations. However, at critical micelle concentration, cationic surfactant octadecyl trimethyl ammonium bromide and nonionic surfactant nonylphenol polyoxyethylene ether promoted the degradation of metolachlor in water-sediment system. Anionic surfactant odium dodecylbenzene sulfonate (SDBS) prolonged the degradation half-life of metolachlor. The presence of surfactants not only affected the environmental behavior of pesticides. When they coexisted with pesticides, the joint toxicity to aquatic organisms cannot be ignored. This study found that the combined effects of three surfactants and metolachlor on the acute developmental toxicity of zebrafish embryos were all synergistic effects. The combined effects of two ionic surfactants and metolachlor on the acute toxicity of adult zebrafish were synergistic effects. Further study showed that co-exposure of SDBS and metolachlor increased the absorption of metolachlor by zebrafish. Combined exposure of SDBS and metolachlor caused oxidative stress in brain, gill and liver of zebrafish. The results showed that the simultaneous presence of anionic surfactants and pesticides in the environment may increase the environmental risk of pesticides.

A comparative study on physicochemical and micellar solubilization performance between monoglucosyl rebaudioside A and rebaudioside A

BACKGROUND

Rebaudioside A (RA) and its monoglucosyl derivative, as like rebaudioside D (RD) are the most popular stevia glycosides but possess poor solubility in water, which limited their application as edible surfactants, the applications as in micellar solubilization and drug delivery. Meanwhile, effect of the monoglucosyl attached to RA moiety remains unclear.

RESULTS

Monoglucosyl rebaudioside A (RAG1) was synthesized via hydrolyzing the transglycosylation product of RA with 95% of RA converted. RAG1 content in raw reaction mixture was as high as 69.5% of total glycosides, and harvested with a content of 88.2% by simple filtration. The RAG1 exhibited an aqueous solubility of 87 folds of RA or 391 folds of RD at 25 °C. The surface activity of RAG1 solution was higher than RA and invincible to RD. The RAG1 micelles promoted aqueous solubility of idebenone (IDE) up to 500 folds higher at 25 °C. The cumulative release rate of IDE encapsulated in RAG1 micelles was 777.5% or 456.7% higher of that of free IDE in simulated gastric/intestinal fluids in 14 h, respectively. The RAG1-IDE remained the same in 98 days at 25 °C.

CONCLUSION

The α-linked glucosyl to RA induced higher hydrophilicity and surface activity than that resulted by β-linked glucosyl, making RAG1 not only dramatically raise the aqueous solubility of RA, but also endow IDE folds higher in bioaccessibility, yet making the capsule stable at storage. The results would provide a new edible delivery nanocarrier for encapsulation of hydrophobic bioactive components. © 2021 Society of Chemical Industry.

Contrasting impacts of mixed nonionic surfactant micelles on plant growth in the delivery of fungicide and herbicide

HYPOTHESIS

Nonionic alkyl ethoxylate surfactants are widely used in agrochemicals to facilitate the permeation of systemic herbicides and fungicides across the plant waxy film. Industrial grade surfactants are often highly mixed and how the mixing affects their interactions with pesticides and wax films remains largely unexplored. A better understanding could enable design of mixed nonionic surfactants for herbicides and fungicides to maximize their efficiency and reduce wastage whilst controlling their impact on plant wax films.

EXPERIMENT

In this study, nonionic surfactants with general structure n-oxyethylene glycol monododecyl ether (C₁₂E_n) were used to form surfactant mixtures with the same average ethoxylate numbers but different hydrophilic-lipophilic balance (HLB) values. Their mixed micellar systems were then used to solubilize a herbicide diuron (DN) and a fungicide cyprodinil (CP), followed by plant wax solubilization upon contact with wax films. These processes were monitored by ¹H NMR and SANS.

FINDING

Pesticide solubilization made surfactant micelles effectively more hydrophobic but subsequent wax dissolution caused pesticide release and the restoration of the micellar amphiphilicity. Nonionic surfactants with lower HLBs form larger nanoaggregates, show enhanced wettability, and have better ability to solubilize and permeate pesticides across the wax film, but may cause significant damage to plant growth. These observations help explain why herbicides applied on weeds would benefit from surfactants with lower HLB values while fungicides require surfactants with HLBs to balance between delivery efficiency and potential phytotoxicity risks.

How do chain lengths of acyl-l-carnitines affect their surface adsorption and solution aggregation?

HYPOTHESIS

l-carnitines in our body systems can be readily converted into acyl-l-carnitines which have a prominent place in cellular energy generation by supporting the transport of long-chain fatty acids into mitochondria. As biocompatible surfactants, acyl-l-carnitines have potential to be useful in technical, personal care and healthcare applications. However, the lack of understanding of the effects of their molecular structures on their physical properties has constrained their potential use.

EXPERIMENTS

This work reports the study of the influence of the acyl chain lengths of acyl-l-carnitines (C_nLC) on solubility, surface adsorption and aggregation. Critical micellar concentrations (CMCs) of C_nLC were determined by surface tension measurements. Neutron reflection (NR) was used to further examine the structure and composition of the adsorbed C_nLC layer. The structural changes of the micellar aggregates under different concentrations of C_nLC, pH and ionic strength were determined by dynamic light scattering (DLS) and small angle neutron scattering (SANS).

FINDINGS

C₁₂LC is fully soluble over a wide temperature and concentration range. There is however a strong decline of solubility with increasing acyl chain length. The adsorption and aggregation behavior of C₁₄LC was therefore studied at 30 °C and C₁₆LC at 45 °C. The solubility boundaries displayed distinct hysteresis with respect to heating and cooling. The CMCs of C₁₂LC, C₁₄LC and C₁₆LC at pH 7 were 1.1 ± 0.1, 0.10 ± 0.02 and 0.010 ± 0.005 mM, respectively, with the limiting values of the area per molecule at the CMC being 45.4 ± 2, 47.5 ± 2 and 48.8 ± 2 Å² and the thicknesses of the adsorbed C_nLC layers at the air/water interface increasing from 21.5 ± 2 to 22.6 ± 2 to 24.2 ± 2 Å, respectively. All three surfactants formed core-shell spherical micelles with comparable dimensional parameters apart from an increase in core radius with acyl chain length. This study outlines the effects of acyl chain length on the physicochemical properties of C_nLCs under different environmental conditions, serving as a useful basis for developing their potential applications.

Structural Disruptions of the Outer Membranes of Gram-Negative Bacteria by Rationally Designed Amphiphilic Antimicrobial Peptides

Gram-negative bacteria are covered by both an inner cytoplasmic membrane (IM) and an outer membrane (OM). Antimicrobial peptides (AMPs) must first permeate through the OM and cell wall before attacking the IM to cause cytoplasmic leakage and kill the bacteria. The bacterial OM is an asymmetric bilayer with the outer leaflet primarily composed of lipopolysaccharides (LPSs) and the inner leaflet composed of phospholipids (PLs). Two cationic α-helical AMPs were designed to target Gram-negative bacteria, a full peptide G(IIKK)₃I-NH₂ (G₃), and a hydrophobic lipopeptide C₈-G(IIKK)₂I-NH₂ (C₈G₂, with C₈ denoting the octanoyl chain). LPS dominates OM functions as the first line of defense against antibiotics, thereby reducing drug susceptibility. This work explores how the two AMPs interact with LPS through several carefully chosen OM models that facilitated measurements from solid-state nuclear magnetic resonance (ss-NMR), small-angle neutron scattering (SANS), and neutron reflectivity (NR). The results revealed that G₃ molecules bound preferably to the LPS head region and functioned as bridge molecules to reassemble the dislocated lipids into bilayer stacks. In contrast, C₈G₂ lipopeptides could quickly penetrate into the central region of the OM to cause direct removal of some membrane lipids. Different structural disruptions implicated different antimicrobial efficacies from these AMPs. The demonstration of the structural features underlying different susceptibilities of the OM to AMPs offers a useful route for the future development of strain-specific AMPs against antimicrobial-resistant pathogens.

What happens when pesticides are solubilised in binary ionic/zwitterionic-nonionic mixed micelles?

HYPOTHESIS

Surfactants have been widely used as adjuvants in agri-sprays to enhance the solubility of pesticides in foliar spray deposits and their mobility through leaf cuticles. Previously, we have characterised pesticide solubilisation in nonionic surfactant micelles, but what happens when pesticides become solubilised in anionic, cationic and zwitterionic and their mixtures with nonionic surfactants remain poorly characterised.

EXPERIMENTS

To facilitate characterisations by SANS and NMR, we used nonionic surfactant hexaethylene glycol monododecyl ether (C₁₂E₆), anionic sodium dodecylsulphate (SDS), cationic dodecyltrimethylammonium bromide (DTAB) and zwitterionic dodecylphosphocholine (C₁₂PC) as model adjuvant systems to solubilise 3 pesticides, Cyprodinil (CP), Azoxystrobin (AZ) and Difenoconazole (DF), representing different structural features. The investigation focused on the influence of solubilisates in driving changes to the micellar nanostructures in the absence or presence of electrolytes. NMR and NOESY were applied to investigate the solubility and location of each pesticide in the micelles. SANS was used to reveal subtle changes to the micellar structures due to pesticide solubilisation with and without electrolytes.

FINDINGS

Unlike nonionic surfactants, the ionic and zwitterionic surfactant micellar structures remain unchanged upon pesticide solubilisation. Electrolytes slightly elongate the ionic surfactant micelles but have no effect on nonionic and zwitterionic surfactants. Pesticide solubilisation could alter the structures of the binary mixtures of ionic/zwitterionic and ionic/nonionic micelles by causing elongation, shell shrinkage and dehydration, with the exact alteration being determined by the molar ratio in the mixture.

Surface adsorption and solution aggregation of a novel lauroyl-l-carnitine surfactant

HYPOTHESIS

l-carnitine plays a crucial role in the cellular production of energy by transporting fatty acids into mitochondria. Acylated l-carnitines are amphiphilic and if appropriate physical properties were demonstrated, they could replace many currently used surfactants with improved biocompatibility and health benefits.

EXPERIMENTS

This work evaluated the surface adsorption of lauroyl-l-carnitine (C₁₂LC) and its aggregation behavior. The size and shape of the aggregates of C₁₂LC surfactant were studied at different temperatures, concentrations, pH and ionic strength by dynamic light scattering (DLS) and small-angle neutron scattering (SANS). Surface tension measurements were carried out to determine the critical micellar concentration (CMC) of C₁₂LC. Combining with the Gibbs equation, the surface excess at different concentrations could be determined. Neutron reflection (NR) was used to determine the structure of the adsorbed layer at the air/water interface with the help of isotopic contrast variations.

FINDINGS

At pH 7, the limiting area per molecule (A_CMC) of the zwitterionic C₁₂LC adsorbed layer at the air/water interface was found to be 46 Å² from surface tension and neutron reflection, smaller than the values of C₁₂PC, C₁₂E₅, DTAB, C₁₂C₄betaine and C₁₂C₈betaine but close to that of SDS. A pronounced surface tension minimum at pH 2 at the low ionic strength was linked to a minimum value of area per molecule of about 30 Å², indicating the competitive adsorption from traces of lauric acid produced by hydrolysis of C₁₂LC. As the concentration increased, area per molecule reached a plateau of 37-39 Å², indicating the dissolution of the more surface-active lauric acid into the micelles of C₁₂LC. DLS and SANS showed that the size and shape of micelles had little response to temperature, concentration, ionic strength or pH. The SANS profiles measured under 3 isotopic contrasts could be well fitted by the core-shell model, giving a spherical core radius of 15.7 Å and a shell thickness of 10.5 Å. The decrease of pH led to more protonated carboxyl groups and more positively charged micelles, but the micellar structures remained unchanged, in spite of their stronger interaction. These features make C₁₂LC potentially attractive as a solubilizing agent.

How do Self-Assembling Antimicrobial Lipopeptides Kill Bacteria?

Antimicrobial peptides are promising alternatives to traditional antibiotics. A group of self-assembling lipopeptides was formed by attaching an acyl chain to the N-terminus of α-helix-forming peptides with the sequence C_x-G(IIKK)_yI-NH₂ (C_xG_y, x = 4-12 and y = 2). C_xG_y self-assemble into nanofibers above their critical aggregation concentrations (CACs). With increasing x, the CACs decrease and the hydrophobic interactions increase, promoting secondary structure transitions within the nanofibers. Antimicrobial activity, determined by the minimum inhibition concentration (MIC), also decreases with increasing x, but the MICs are significantly smaller than the CACs, suggesting effective bacterial membrane-disrupting power. Unlike conventional antibiotics, both C₈G₂ and C₁₂G₂ can kill Staphylococcus aureus and Escherichia coli after only minutes of exposure under the concentrations studied. C₁₂G₂ nanofibers have considerably faster killing dynamics and lower cytotoxicity than their nonaggregated monomers. Antimicrobial activity of peptide aggregates has, to date, been underexploited, and it is found to be a very promising mechanism for peptide design. Detailed evidence for the molecular mechanisms involved is provided, based on superresolution fluorescence microscopy, solid-state nuclear magnetic resonance, atomic force microscopy, neutron scattering/reflectivity, circular dichroism, and Brewster angle microscopy.

How does substrate hydrophobicity affect the morphological features of reconstituted wax films and their interactions with nonionic surfactant and pesticide?

HYPOTHESIS

Surfactants are widely used in agri-sprays to improve pesticide efficiency, but the mechanism underlying their interactions with the surface wax film on plants remains poorly understood. To facilitate physical characterisations, we have reconstituted wheat cuticular wax films onto an optically flat silicon substrate with and without octadecyltrimethoxysilane modification to control surface hydrophobicity.

EXPERIMENTS

Imaging techniques including scanning electron microscopy (SEM) unravelled morphological features of the reconstituted wax films similar to those on leaves, showing little impact from the different substrates used. Neutron reflection (NR) established that reconstituted wax films were comprised of an underlying wax film decorated with top surface wax protrusions, a common feature irrespective of substrate hydrophobicity and highly consistent with what was observed from natural wax films. NR measurements, with the help of isotopic H/D substitutions to modify the scattering contributions of the wax and solvent, revealed different wax regimes within the wax films, illustrating the impact of surface hydrophilicity on the nanostructures within the wax films.

FINDINGS

It was observed from both spectroscopic ellipsometry and NR measurements that wax films formed on the hydrophobic substrate were more robust and durable against attack by nonionic surfactant C₁₂E₆ solubilised with pesticide Cyprodinil (CP) than films coated on the bare hydrophilic silica. Thus, the former could be a more feasible model for studying the wax-surfactant-pesticide interactions.

Characterizing the Oil-like and Surfactant-like Behavior of Polar Oils

In this work, a bifunctional model was developed to fit and predict the phase inversion point (PIP) of microemulsions containing polar oils. This model incorporated the hydrophilic-lipophilic difference (HLD) equations, where HLD = 0 at the PIP. The model uses a Langmuir isotherm to account for the interfacial segregation of polar oils as a function of their concentration in the bulk oil phase. The segregated polar oil was treated as being surfactant-like, having a characteristic curvature (Cc). The polar oil in the bulk oil phase was characterized via an equivalent alkane carbon number (EACN). The Cc value was obtained considering deviations in the PIP at low polar oil concentrations. The EACN was determined considering PIP deviations at high polar oil concentrations. Naphthenic acid and dodecanol were used as model polar oils mixed with ionic and nonionic surfactants and nonpolar oils. The EACN of the polar oil was shown to be independent of the EACN of the nonpolar oil and likely independent of the surfactant. The Cc for dodecanol was likely independent of the surfactant used. For naphthenic acid, the Cc was independent of the nonpolar oil, and within a certain surfactant type (ionic, nonionic, or extended ionic), it was likely independent of the surfactant. For the naphthenic acid systems, the segregation predicted via the bifunctional model was consistent with experimental measurements of this segregation. Given that the bifunctional model only involves phase inversion experiments, it is a convenient method to determine the oil-like and surfactant-like nature of polar oils.

Solubilization of phloretin via steviol glycoside-based solid dispersion and micelles

In this study, the solubility of phloretin (PT) was enhanced via steviol glycoside (STE)-based micelle (MC) and solid dispersion (SD). Computer simulation, characterization, interaction with serum albumin (SA) and in vitro release were carried out to investigate the solubilization mechanisms and the difference in their solubilization capacities. For PT-loaded MC (STE-PT MC), PT was encapsulated into the hydrophobic core of a spherical micelle with a droplet diameter of 5 nm. For PT-loaded SD (STE-PT SD), PT was completely dispersed with the amorphous state in STE. Most of those PTs were directly dissolved in water, and few were encapsulated by STE micelles. The amorphous state combined with relatively large micelles contributed to the high solubilization capacity of STE-PT SD. In addition, PT of STE-PT SD exhibited a higher dissolution rate and more effective interaction with SA than that of STE-PT MC. No undesirable chemical interaction between PT and STE occurred.