Criteria for colloidal gelation of thermo-sensitive poly(N-isopropylacrylamide) based microgels

Stress-independent delay time in yielding of dilute colloidal gels

We investigate the yielding under shear for dilute poly(N-isopropyl acrylamide-co-fumaric acid) (PNIPAM-FAc) colloidal gels obtained above the volume phase transition temperature. In this temperature range, the microgel suspensions form colloidal gels due to hydrophobic interparticle interactions under appropriate pH and ionic strength conditions. Step-strain tests revealed that yielding occurs when the applied strain exceeds a specific threshold, requiring a finite, stress-independent delay time (tD). This is distinct from previous findings on delayed yielding in other colloidal gels, where tD decreases with increasing stress. In the start-up shear tests, yield strain (γy) at a higher strain rate () increases with escalating , while γy at lower  remains constant. This characteristic γy- relationship is successfully explained by a simple model using the stress-independent tD value without an adjustable fitting parameter. The distinctive yielding behavior, underscored by a stress-independent tD, is expected to originate from strain-induced macroscopic phase separation into a dense colloidal gel and water, observable separately from rheological measurements.

Synthetic and biopolymeric microgels: Review of similarities and difference in behaviour in bulk phases and at interfaces

This review discusses the current knowledge of interfacial and bulk interactions of biopolymeric microgels in relation to the well-established properties of synthetic microgels for applications as viscosity modifiers and Pickering stabilisers. We present a timeline showing the key milestones in designing microgels and their bulk/ interfacial performance. Poly(N-isopropylacrylamide) (pNIPAM) microgels have remained as the protagonist in the synthetic microgel domain whilst proteins or polysaccharides have been primarily used to fabricate biopolymeric microgels. Bulk properties of microgel dispersions are dominated by the volume fraction (ϕ) of the microgel particles, but ϕ is difficult to pinpoint, as addressed by many theoretical models. By evaluating recent experimental studies over the last five years, we find an increasing focus on the analysis of microgel elasticity as a key parameter in modulating their packing at the interfaces, within the provinces of both synthetic and biopolymeric systems. Production methods and physiochemical factors shown to influence microgel swelling in the aqueous phase can have a significant impact on their bulk as well as interfacial performance. Compared to synthetic microgels, biopolymer microgels show a greater tendency for polydispersity and aggregation and do not appear to have a core-corona structure. Comprehensive studies of biopolymeric microgels are still lacking, for example, to accurately determine their inter- and intra- particle interactions, whilst a wider variety of techniques need to be applied in order to allow comparisons to real systems of practical usage.

Impact of polyelectrolyte adsorption on the rheology of concentrated poly(N-isopropylacrylamide) microgel suspensions

We explore the impact of three water-soluble polyelectrolytes (PEs) on the flow of concentrated suspensions of poly(N-isopropylacrylamide) (PNIPAm) microgels with thermoresponsive anionic charge density. By progressively adding the PEs to a jammed suspension of swollen microgels, we show that the rheology of the mixtures is remarkably influenced by the sign of the PE charge, PE concentration and hydrophobicity only when the temperature is increased above the microgel volume phase transition temperature T_c, namely when microgels collapse, they are partially hydrophobic and form a volume-spanning colloidal gel. We find that the original gel is strengthened close to the isoelectric point, attained when microgels are mixed with cationic PEs, while PE hydrophobicity rules the gel strengthening at very high PE concentrations. Surprisingly, we find that polyelectrolyte adsorption or partial embedding of PE chains inside the microgel periphery occurs also when anionic polymers of polystyrene sulfonate with a high degree of sulfonation are added. This gives rise to colloidal stabilization and to the melting of the original gel network above T_c. Contrastingly, the presence of polyelectrolytes in suspensions of swollen, jammed microgels results in a weak softening of the original repulsive glass, even when an apparent isoelectric condition is met. Our study puts forward the crucial role of electrostatics in thermosensitive microgels, unveiling an exciting new way to tailor the flow of these soft colloids and highlighting a largely unexplored path to engineer soft colloidal mixtures.

Linear and nonlinear viscoelasticity of concentrated thermoresponsive microgel suspensions

We present an integrated experimental and theoretical study of the dynamics and rheology of self-crosslinked, slightly charged, temperature responsive soft poly(N-isopropylacrylamide) (pNIPAM) microgels over a wide range of concentration and temperature spanning the sharp change in particle size and intermolecular interactions across the lower critical solution temperature (LCST). Dramatic, non-monotonic changes in viscoelasticity are observed as a function of temperature, with distinct concentration dependence in the dense fluid, glassy, and soft-jammed regimes. Motivated by our experimental observations, we formulate a minimalistic model for the size dependence of a single microgel particle and the change of the interparticle interaction from purely repulsive to attractive upon heating. Using microscopic equilibrium and time-dependent statistical mechanical theories, theoretical predictions are quantitatively compared with experimental measurements of the shear modulus. Good agreement is found for the nonmonotonic temperature behavior that originates as a consequence of the competition between reduced microgel packing fraction and increasing interparticle attractions. Testable predictions are made for nonlinear rheological properties such as the yield stress and strain. To our knowledge, this is the first attempt to quantitatively understand in a unified manner the viscoelasticity of dense, temperature-responsive microgel suspensions spanning a wide range of temperatures and concentrations.

Microrheology of thermoresponsive poly(N-isopropylacrylamide) microgel dispersions near a substrate surface

HYPOTHESIS

Relative to the bulk systems, the near-wall (<500 nm) rheological responses of soft poly(N-isopropylacrylamide) (PNIPAM) microgel dispersions may exhibit distinct dependence on the frequency (ω), temperature (T), and effective volume fraction (ϕ_eff) during the volume phase transitions. The microrheological behaviors are expected to be governed by the near-wall microstructure and its spatial heterogeneity.

EXPERIMENTS

The combination of active microrheometry (multipole magnetic tweezers) and total internal reflection microscopy (TIRM) was employed to probe the structure-rheology relationships of microgel dispersions near a substrate surface. The ω, T, and ϕ_eff-dependences of the storage modulus (G'), loss modulus (G"), and softness (J) were analyzed by power-law and Arrhenius-like scaling theories. The fluctuation of J was further analyzed to give a quantitative description of the inhomogeneity in the near-wall regions.

FINDINGS

(1) Remarkable differences in the rheological behaviors between the bulk and near-wall cases are revealed, where the latter shows a segmented overlap behavior in ϕ_eff; (2) Five regimes of ϕ_eff that correspond to distinct physical states of the microgel dispersions are determined; (3) The near-wall local structures exhibit more heterogeneity in the glass and colloidal gel regimes as compared to the liquid regime.

On Going to a New Era of Microgel Exhibiting Volume Phase Transition

The discovery of phenomena of volume phase transition has had a great impact not only on bulk gels but also on the world of microgels. In particular, research on poly(N-isopropylacrylamide) (PNIPAM) microgels, whose transition temperature is close to body temperature, has made remarkable progress in almost 35 years. This review presents some breakthrough findings in microgels that exhibit volume phase transitions and outlines recent works on the synthesis, structural analysis, and research direction of microgels.

Two-step yielding behavior of densely packed microgel mixtures with chemically dissimilar surfaces and largely different sizes

Steady-state flow and elastic behavior is investigated for the moderately concentrated binary suspensions of soft microgels (pastes) with chemically dissimilar surfaces, and various degrees of size- and stiffness disparities. The pastes of poly(N-isopropyl acrylamide) (N) and poly(N-isopropyl methacrylamide) (NM) microgels with different values of yield strain γc (γNc > γNMc) are employed as the components. For the single microgel pastes (φ ≈ 1 where φ is apparent volume fraction), the values of γc are governed by the chemical species of constituent polymer in microgel surface whereas γc is insensitive to cross-link density and particle size. We demonstrate that the binary N/NM pastes with large size disparity (RN/NM = DN/DNM < 0.26 where D is the microgel diameter) at low φN (φN: weight fraction of small N microgels) exhibit the peculiarities in several rheological aspects, i.e., the two-step yielding in steady-state flow, and their values of γc and equilibrium shear modulus (G0) being equivalent to those of the single large NM microgel paste. These peculiarities are attributed to the characteristic packing resulting from large size disparity in which all or almost of the small N microgels tend to be accommodated in the gap between the large NM microgels even in moderately concentrated state. This characteristic packing substantially masks the contribution of the small N microgels at low φN, explaining the φN-independent G0 and γc as well as the first yielding governed solely by the large NM microgels. The second yielding results from the emerged contribution of the small N microgels expelled out from the gap by the positional rearrangements after the first yielding. The binary homo-N/N pastes with the similarly large size disparity at low φsmall also exhibit the φsmall-independent values of G0, but they show one-step yielding, indicating that the two-step yielding requires not only sufficiently large size disparity but also chemical dissimilarity (different values of γc) between the two components.