Bio-inspired fabrication of Ester-functionalized imprinted composite membrane for rapid and high-efficient recovery of lithium ion from seawater

Research Progress on Metal Ion Recovery Based on Membrane Technology and Adsorption Synergy

The development of modern industry will generate more and more waste containing metal ions. It is necessary to take appropriate measures to recover these ions, whether from the perspective of environmental protection or improving economic benefits. So far, scientists have studied many methods for recovering metal ions. Among these methods, adsorption and membrane separation have received widespread attention due to their own characteristics. Combining adsorption and membrane separation methods can better leverage their respective advantages to improve the ability of recovering metal ions. This review, therefore, focuses on the synergistic recovery of metal ions by adsorption and membrane separation methods. This article first briefly explains the theoretical principles of membrane separation and adsorption synergy, and then focuses on several technologies that have received attention in different chapters. In these chapters, membrane technology is briefly introduced, followed by the situation and progress of synergistic application with adsorption technology. Then, the article compares and elaborates on the advantages and disadvantages of the above technologies, and finally summarizes and looks forward to these technologies being used to solve the difficulties and challenges in industrial application.

Ion-imprinted membranes for lithium recovery: A review

This review critically examines the effectiveness of ion-imprinted membranes (IIMs) in selectively recovering lithium (Li) from challenging sources such as seawater and brine. These membranes feature customized binding sites that specifically target Li ions, enabling selective separation from other ions, thanks to cavities shaped with crown ether or calixarene for improved selectivity. The review thoroughly investigates the application of IIMs in Li extraction, covering extensive sections on 12-crown-4 ether (a fundamental crown ether for Li), its modifications, calixarenes, and other materials for creating imprinting sites. It evaluates these systems against several criteria, including the source solution's complexity, Li+ concentration, operational pH, selectivity, and membrane's ability for regeneration and repeated use. This evaluation places IIMs as a leading-edge technology for Li extraction, surpassing traditional methods like ion-sieves, particularly in high Mg2+/Li+ ratio brines. It also highlights the developmental challenges of IIMs, focusing on optimizing adsorption, maintaining selectivity across varied ionic solutions, and enhancing permselectivity. The review reveals that while the bulk of research is still exploratory, only a limited portion has progressed to detailed lab verification, indicating that the application of IIMs in Li+ recovery is still at an embryonic stage, with no instances of pilot-scale trials reported. This thorough review elucidates the potential of IIMs in Li recovery, cataloging advancements, pinpointing challenges, and suggesting directions for forthcoming research endeavors. This informative synthesis serves as a valuable resource for both the scientific community and industry professionals navigating this evolving field.

A review of technologies for direct lithium extraction from low Li+ concentration aqueous solutions

Under the Paris Agreement, established by the United Nations Framework Convention on Climate Change, many countries have agreed to transition their energy sources and technologies to reduce greenhouse gas emissions to levels concordant with the 1.5°C warming goal. Lithium (Li) is critical to this transition due to its use in nuclear fusion as well as in rechargeable lithium-ion batteries used for energy storage for electric vehicles and renewable energy harvesting systems. As a result, the global demand for Li is expected to reach 5.11 Mt by 2050. At this consumption rate, the Li reserves on land are expected to be depleted by 2080. In addition to spodumene and lepidolite ores, Li is present in seawater, and salt-lake brines as dissolved Li+ ions. Li recovery from aqueous solutions such as these are a potential solution to limited terrestrial reserves. The present work reviews the advantages and challenges of a variety of technologies for Li recovery from aqueous solutions, including precipitants, solvent extractants, Li-ion sieves, Li-ion-imprinted membranes, battery-based electrochemical systems, and electro-membrane-based electrochemical systems. The techno-economic feasibility and key performance parameters of each technology, such as the Li+ capacity, selectivity, separation efficiency, recovery, regeneration, cyclical stability, thermal stability, environmental durability, product quality, extraction time, and energy consumption are highlighted when available. Excluding precipitation and solvent extraction, these technologies demonstrate a high potential for sustainable Li+ extraction from low Li+ concentration aqueous solutions or seawater. However, further research and development will be required to scale these technologies from benchtop experiments to industrial applications. The development of optimized materials and synthesis methods that improve the Li+ selectivity, separation efficiency, chemical stability, lifetime, and Li+ recovery should be prioritized. Additionally, techno-economic and life cycle analyses are needed for a more critical evaluation of these extraction technologies for large-scale Li production. Such assessments will further elucidate the climate impact, energy demand, capital costs, operational costs, productivity, potential return on investment, and other key feasibility factors. It is anticipated that this review will provide a solid foundation for future research commercialization efforts to sustainably meet the growing demand for Li as the world transitions to clean energy.

Preparation and permeation recognition mechanism of Cr(vi) ion-imprinted composite membranes

The Cr(vi) ion-imprinted composite membranes (Cr(vi)-IICMs) were prepared by using the surface imprinting method. The template ion was Cr(vi), the functional monomer was 4-vinylpyridine (4-VP), and the nylon filter membrane (nylon-6) was the support membrane. Non-imprinted composite membranes (NICMs) were prepared under the same conditions as the corresponding Cr(vi)-IICM. The adsorption effect of the imprinted membrane can reach 2.4 times that of the corresponding non-imprinted membrane. Meanwhile, the adsorption quantity of Cr(vi)-IICM was 34.60 μmol·g−1. The physical characteristics of membranes were confirmed by Brunauer–Emmett–Teller and scanning electron microscopy. Inductively coupled plasma emission spectrometry was used to analyze their adsorption properties and permeation selectivity. Cr(vi)-IICM and NICM were both mesoporous materials from the structural characterization and performance test results. Their adsorption behavior conformed to the Langmuir isotherm adsorption model. The permeation recognition mechanism of Cr(vi)-IICM was the Piletsky’s gate model. The IICM still has excellent permeability selectivity to Cr(vi) in the presence of competitive ions. The results provided a reference for the isolation and enrichment of Cr(vi).

Recent Advances in the Lithium Recovery from Water Resources: From Passive to Electrochemical Methods

The ever-increasing amount of batteries used in today's society has led to an increase in the demand of lithium in the last few decades. While mining resources of this element have been steadily exploited and are rapidly depleting, water resources constitute an interesting reservoir just out of reach of current technologies. Several techniques are being explored and novel materials engineered. While evaporation is very time-consuming and has large footprints, ion sieves and supramolecular systems can be suitably tailored and even integrated into membrane and electrochemical techniques. This review gives a comprehensive overview of the available solutions to recover lithium from water resources both by passive and electrically enhanced techniques. Accordingly, this work aims to provide in a single document a rational comparison of outstanding strategies to remove lithium from aqueous sources. To this end, practical figures of merit of both main groups of techniques are provided. An absence of a common experimental protocol and the resulting variability of data and experimental methods are identified. The need for a shared methodology and a common agreement to report performance metrics are underlined.

Polydimethylsiloxane/graphene oxide/β-cyclodextrin sponge as a solid-phase extraction sorbent coupled with GC-MS for rapid adsorption and sensitive determination of lavender essential oil

An adsorbent polydimethylsiloxane/graphene oxide/β-cyclodextrin sponge, which possessed the merits of high surface area, chemical stability, environment friendly and excellent extraction capacity, was successfully fabricated. Based on the advantages, a novel microwave-assisted headspace solid-phase extraction method for lavender essential oil using polydimethylsiloxane/graphene oxide/β-cyclodextrin sponge as adsorbents was developed in this study. Various experimental parameters were studied. The optimal extraction conditions were as follows: 1 mg mL^-1 as dopamine solution concentration, graphene oxide dosages of 30 mg, microwave power of 700 W, microwave irradiation time of 10 min and desorption solvent of n-hexane. Under the optimal extraction condition, linearities ranging from 10 to 800 ng were achieved for six representative compounds with the correlation coefficients value of >0.99. The intra-day and inter-day precisions were in the ranges of 0.40-1.56% and 0.67-2.56%, respectively. Finally, the proposed technique was applied to analyze essential oil constituents in 14 samples of three lavender varieties, and 48 compounds were identified. Lavender varieties were distinguished using principal component analysis and partial least squares discriminant analysis. The results showed that the mothed developed in this study is a novel, simple, and sensitive method for the determination of essential oil in complex plant samples. This article is protected by copyright. All rights reserved.

Dual-imprinted mixed matrix membranes for selective recognition and separation: A synergetic imprinting strategy based on complex initiation system

Molecularly imprinted membranes (MIMs) with sufficient and even-distributed recognition sites that can break the permeability-selectivity trade-off phenomenon are desirable in chemical field of selective separation. Herein graphene oxide (GO)/TiO₂-loaded nanocomposite fibrous membranes were prepared by developing two kinds of tetracycline (TC)-imprinted systems in the same MIMs-based material. Thereinto, polydopamine-based and sol-gel-based imprinting processes were applied to the synthesis of GO/TiO₂-loaded dual-imprinted mixed matrix membranes (GT-DIMs). The as-prepared GT-DIMs encompassed innovative GO/TiO₂-based nanocomposite fibrous channels and two kinds of TC-imprinted systems, and critical comparisons regarding the fluxes, rebinding capacities and permselectivity were provided and studied. Importantly, dual-imprinted system of GT-DIMs could not only allow for largely enhanced rebinding result (70.63 mg/g) and fast adsorption equilibrium rate within 30 min, but also facilitate the high permselectivity of TC in complex separation systems and lab-simulated wastewater samples. The permselectivity factors were all around 5.0, which strongly demonstrated the efficiently selective recognition and separation performance of GT-DIMs. Overall, based on testing results of practical separation and scalability, excellent structural stability and separation continuity had been successfully obtained for selective separation applications of pollutants.

HTO/Cellulose Aerogel for Rapid and Highly Selective Li+ Recovery from Seawater

To achieve rapid and highly efficient recovery of Li⁺ from seawater, a series of H₂TiO₃/cellulose aerogels (HTO/CA) with a porous network were prepared by a simple and effective method. The as-prepared HTO/CA were characterized and their Li⁺ adsorption performance was evaluated. The obtained results revealed that the maximum capacity of HTO/CA to adsorb Li⁺ was 28.58 ± 0.71 mg g⁻¹. The dynamic k₂ value indicated that the Li⁺ adsorption rate of HTO/CA was nearly five times that of HTO powder. Furthermore, the aerogel retained extremely high Li⁺ selectivity compared with Mg²⁺, Ca²⁺, K⁺, and Na⁺. After regeneration for five cycles, the HTO/CA retained a Li⁺ adsorption capacity of 22.95 mg g⁻¹. Moreover, the HTO/CA showed an excellent adsorption efficiency of 69.93% ± 0.04% and high selectivity to Li⁺ in actual seawater. These findings confirm its potential as an adsorbent for recovering Li⁺ from seawater.

A novel mixed matrix polysulfone membrane for enhanced ultrafiltration and photocatalytic self-cleaning performance

Photocatalytic materials can be used as self-cleaning functional materials to alleviate the irreversible fouling of ultrafiltration membranes. In this work, the small size g-C₃N₄/Bi₂MoO₆ (SCB) blended polysulfone (PSF) ultrafiltration membranes was fabricated by hydrothermal and phase inversion methods. As a functional filler of ultrafiltration membranes, the small size g-C₃N₄ nanosheet decorated on the surface of Bi₂MoO₆ can enhance the photocatalytic performance for bovine serum albumin (BSA) degradation, and remove irreversible fouling under visible light irradiation. In addition, the introduction of SCB microspheres into PSF matrix obviously increased the porosity of ultrafiltration membranes. Therefore, the SCB-PSF ultrafiltration membranes displayed excellent antifouling performance (flux recovery ratio is 82.53%) and BSA rejection rates (94.77%). SCB-PSF also had high photocatalytic self-cleaning activity, indicating excellent application prospects in organic wastewater treatment.

Magnetic imprinted nanoparticles with synergistic tailoring of covalent and non-covalent interactions for purification and detection of procyanidin B2

A synergistic imprinting strategy of covalent and non-covalent interactions is proposed to prepare magnetic molecularly imprinted polymers (DI-MMIPs) for highly selective separation of procyanidin B2 (PC) from grape seed samples. Dopamine and 3-amino-phenylboronic acid as cooperative functional monomers endow the imprinted sites with synergistic tailoring. Benefiting from the synergistic effect, the DI-MMIPs exhibit enhanced imprinting performance with high adsorption capacity (27.71 mg g^-1), fast kinetic equilibrium time (within 30 min), outstanding selectivity (IF = 5.8, SC > 3.2), and satisfactory regeneration ability. In addition, the DI-MMIPs possess good magnetism, uniform morphology with typical core-shell structure, and stable crystallization. Furthermore, the established DI-MMIPs coupled with HPLC-UV (~ 280 nm) method has a wide linearity range of 0.05-200 μg mL^-1 with correlation coefficient of 0.9997, high recoveries (> 93.1%) with RSDs from 2.9 to 5.5%, and low LOD (0.0008 μg mL^-1). Consequently, this work provides an effective and easily tailored way to fabricate magnetic imprinted nanomaterials with both rapid recognition rate and high selectivity and thus holds great promise to realize the extraction and detection of PC from real samples.

Biomimetic design and synthesis of visible-light-driven g-C3N4 nanotube @polydopamine/NiCo-layered double hydroxides composite photocatalysts for improved photocatalytic hydrogen evolution activity

In the practical process of photocatalytic H₂ evolution, optimizing the ability of light absorption and charge spatial separation is the top priority for improving the photocatalytic performance. In this study, we elaborately engineer neoteric g-C₃N₄ nanotube@polydopamine(pDA)/NiCo-LDH (LPC) composite photocatalyst by combining hydrothermal and calcination method. In the LPC composite system, the one-dimensional (1D) g-C₃N₄ nanotubes with larger specific surface area can afford more active sites and conduce to shorten the charge migration distance, as well as the high-speed mass transfer in the nanotube can accelerate the reaction course. The g-C₃N₄/NiCo-LDH type-II heterojunction can efficaciously stimulate the spatial separation of photo-produced charge. In addition, pDA as heterojunction metal-free interface mediums can provide multiple action (π-π* electron delocalization effect, adhesive action and photosensitization). The optimized LPC nanocomposite displays about 3.3-fold high photoactivity for H₂ evolution compared with the g-C₃N₄ nanotube under solar light irradiation. In addition, the cycle experiment result shows that the LPC composite photocatalyst possesses superior stability and recyclability. The resultant g-C₃N₄@pDA/NiCo-LDH composite photocatalyst displays the potential practical application in the field of energy conversion.