The surface potential explains ion specific bubble coalescence inhibition

Understanding the Electrochemical Extraction of Lithium from Ultradilute Solutions

The electrochemical extraction of lithium (Li) from aqueous sources using electrochemical means is a promising direct Li extraction technology. However, to this date, most electrochemical Li extraction studies are confined to Li-rich brine, neglecting the practical and existing Li-lean resources, with their overall extraction behaviors currently not fully understood. More still, the effect of elevated sodium (Na) concentrations typically found in most Li-lean water sources on Li extraction is unclear. Hence, in this work, we first understand the electrochemical Li extraction behaviors from ultradilute solutions using spinel lithium manganese oxide as the model electrode. We discovered that Li extraction depends highly on the Li concentration and cell operation current density. Then, we switched our focus on low Li to Na ratio solutions, revealing that Na can dominate the electrostatic screening layer, reducing Li ion concentration. Based on these understandings, we rationally employed pulsed electrochemical operation to restructure the electrode surface and distribute the surface-adsorbed species, which efficiently achieves a high Li selectivity even in extremely low initial Li/Na concentrations of up to 1:20,000.

Ion-Specific Bubble Coalescence Dynamics in Electrolyte Solutions

Bubble coalescence time scale is important in applications such as froth flotation, food and pharmaceutical industries, and two-phase thermal management. The time scale of coalescence is sensitive to the dissolved ions. In this study, we investigate the evolution of a thin electrolyte film between a bubble and a hydrophilic substrate during coalescence. We present a thin-film equation-based numerical model that accounts for the dependence of the surface tension gradient and electric double layer (EDL) on the concentration of ions at the air-liquid interface. The influence of Marangoni stresses and the EDL on the hydrodynamics of drainage determines the coalescence time scale. We show that the electrolytes, such as NaCl, Na2SO4, and NaI retard coalescence, in contrast to HCl and HNO3 that have little effect on the coalescence time scale. We also show that the drainage of the electrolyte films with higher concentrations is retarded due to increased Marangoni stresses at the air-water interface. The slow drainage triggers an early formation of the dimple in the thin film, thus trapping more fluid within, which further decreases the drainage rate. For a hydrophilic substrate, EDL along with van der Waals for a given concentration governs the final dynamics of thin films, eventually resulting in a stable thin layer of the electrolyte between the bubble and the substrate. The stabilizing thickness reduces by an order of magnitude as the NaCl concentration increases from 0.01 to 10 mM. For Na2SO4 solution, the film is stabilized at a smaller thickness due to higher valency cations resulting in higher screening of the EDL repulsion.

Nanoscale Transport during Liquid Film Thinning Inhibits Bubble Coalescing Behavior in Electrolyte Solutions

The long-standing puzzle of why two colliding bubbles in an electrolyte solution do not coalesce immediately upon contact is resolved. The water film between the bubbles needs to be drained out first before its rupture, i.e., coalescence. Experiments reveal clearly that the film thinning exhibits a rather sudden slowdown (around 30-50 nm), which is orders of magnitude smaller than similar experiments involving surfactants. A critical step in explaining this phenomenon is to realize that the solute concentration is different in bulk and at the surface. During thinning, this will generate an electrolyte concentration difference in film solution along the interacting region, which in turn causes a Marangoni stress to resist film thinning. We develop a film drainage model that explains the experimentally observed phenomena well. The underlying physical mechanism, that confused the scientific community for decades, is now finally revealed.

Microfluidic Investigation of the Ion-Specific Effect on Bubble Coalescence in Salt Solutions

A microfluidic method was developed to study the ion-specific effect on bubble coalescence in salt solutions. Compared with other reported methods, microfluidics provides a more direct and accurate means of measuring bubble coalescence in salt solutions. We analyzed the coalescence time and approach velocity between bubbles and used simulation to investigate the pressure evolution during the coalescence process. The coalescence time of the three salt solutions decreased initially and then increased as the concentration of the salt solution was increased. The concentration with the shortest coalescence time is considered as the transition concentration (TC) and exhibits ion-specific. At the TC, the change in coalescence time indicates a shift in the effect of salt on bubble coalescence from facilitation to initial inhibition. Meanwhile, it can be seen that the sodium halide solutions significantly inhibit the bubble coalescence and the inhibition capability follows the order NaCl > NaBr > NaI. The results of the approach velocity show that the coalescence time decreases with increasing approach velocity, as well as the approach velocity was strongly influenced by concentration. The approach velocity undergoes a significant change at the TC. Furthermore, simulations of bubble coalescence in the microchannel indicate that the vertical pressure gradient at the center point of the bubble pairs increases as bubbles approach, driving liquid film drainage until bubble coalescence. The pressure at the center of the bubble pair reaches the maximum when the bubbles have first coalesced. It was further revealed that the concentration of the salt solution has a significant impact on the maximum pressure, as evidenced by the observed trend of decreasing pressure values with increasing concentrations.

Hierarchical Materials from High Information Content Macromolecular Building Blocks: Construction, Dynamic Interventions, and Prediction

Hierarchical materials that exhibit order over multiple length scales are ubiquitous in nature. Because hierarchy gives rise to unique properties and functions, many have sought inspiration from nature when designing and fabricating hierarchical matter. More and more, however, nature's own high-information content building blocks, proteins, peptides, and peptidomimetics, are being coopted to build hierarchy because the information that determines structure, function, and interfacial interactions can be readily encoded in these versatile macromolecules. Here, we take stock of recent progress in the rational design and characterization of hierarchical materials produced from high-information content blocks with a focus on stimuli-responsive and "smart" architectures. We also review advances in the use of computational simulations and data-driven predictions to shed light on how the side chain chemistry and conformational flexibility of macromolecular blocks drive the emergence of order and the acquisition of hierarchy and also on how ionic, solvent, and surface effects influence the outcomes of assembly. Continued progress in the above areas will ultimately usher in an era where an understanding of designed interactions, surface effects, and solution conditions can be harnessed to achieve predictive materials synthesis across scale and drive emergent phenomena in the self-assembly and reconfiguration of high-information content building blocks.

Thermodynamic nonequilibrium effects in bubble coalescence: A discrete Boltzmann study

The thermodynamic nonequilibrium (TNE) effects in a coalescence process of two initially static bubbles under thermal conditions are investigated by a discrete Boltzmann model. The spatial distributions of the typical nonequilibrium quantity, i.e., nonorganized momentum fluxes (NOMFs), during evolutions are investigated in detail. The density-weighted statistical method is used to highlight the relationship between the TNE effects and the morphological and kinetics characteristics of bubble coalescence. The results show that the xx component and yy component of NOMFs are antisymmetrical; the xy component changes from an antisymmetric internal and external double quadrupole structure to an outer octupole structure during the coalescence process. Moreover, the evolution of the averaged xx component of NOMFs provides two characteristic instants, which divide the nonequilibrium process into three stages. The first instant, when the averaged xx component of the NOMFs reaches its first local minimum, corresponds to the moment when the mean coalescence speed gets the maximum, and at this time the ratio of minor and major axes is about 1/2. The second instant, when the averaged xx component of the NOMFs gets its second local maximum, corresponds to the moment when the ratio of minor and major axes becomes 1 for the first time. It is interesting to find that the three quantities, TNE intensity, acceleration of coalescence, and the slope of boundary length, show a high degree of correlation and attain their maxima simultaneously. The surface tension and the heat conduction accelerate the process of bubble coalescence, while the viscosity delays it. Both the surface tension and the viscosity enhance the global nonequilibrium intensity, whereas the heat conduction restrains it. These TNE features and findings present some insights into the kinetics of bubble coalescence.

Understanding specific ion effects and the Hofmeister series

Specific ion effects (SIE), encompassing the Hofmeister Series, have been known for more than 130 years since Hofmeister and Lewith's foundational work. SIEs are ubiquitous and are observed across the medical, biological, chemical and industrial sciences. Nevertheless, no general predictive theory has yet been able to explain ion specificity across these fields; it remains impossible to predict when, how, and to what magnitude, a SIE will be observed. In part, this is due to the complexity of real systems in which ions, counterions, solvents and cosolutes all play varying roles, which give rise to anomalies and reversals in anticipated SIEs. Herein we review the historical explanations for SIE in water and the key ion properties that have been attributed to them. Systems where the Hofmeister series is perturbed or reversed are explored, as is the behaviour of ions at the liquid-vapour interface. We discuss SIEs in mixed electrolytes, nonaqueous solvents, and in highly concentrated electrolyte solutions - exciting frontiers in this field with particular relevance to biological and electrochemical applications. We conclude the perspective by summarising the challenges and opportunities facing this SIE research that highlight potential pathways towards a general predictive theory of SIE.

Electrification of water interface

The surface charge of a water interface determines many fundamental processes in physical chemistry and interface science, and it has been intensively studied for over a hundred years. We summarize experimental methods to characterize the surface charge densities developed so far: electrokinetics, double-layer force measurements, potentiometric titration, surface-sensitive nonlinear spectroscopy, and surface-sensitive mass spectrometry. Then, we elucidate physical ion adsorption and chemical electrification as examples of electrification mechanisms. In the end, novel effects on surface electrification are discussed in detail. We believe that this clear overview of state of the art in a charged water interface will surely help the fundamental progress of physics and chemistry at interfaces in the future.