Inlaying metal-organic framework derived pancake-like TiO2 into three-dimensional BiOI for visible-light-driven generation of vanillin from sodium lignosulfonate

Visible-Light-Active BiOI/TiO2 Heterojunction Photocatalysts for Remediation of Crude Oil-Contaminated Water

In this study, BiOI-sensitized TiO2 (BiOI/TiO2) nanocomposites with different levels of BiOI deposited via sequential ionic layer adsorption and reaction (SILAR) have been explored for the degradation of methyl orange, 4-chlorophenol (4-CP), and crude oil in water under visible (>400 nm) irradiation with excellent degradation performance. The reaction progress for methyl orange and 4-chlorophenol was monitored by a UV-vis spectrophotometer, and the degradation of the crude oil hydrocarbons was determined by GC-MS. The BiOI/TiO2 heterojunction improves separation of photogenerated charges, which enhances the degradation efficiency. Evaluation of the visible-light photocatalytic performance of the synthesized catalysts against methyl orange degradation confirmed that four SILAR cycles are the optimal deposition condition for the best degradation efficiency. The efficiency was further confirmed by degrading 4-CP and crude oil, achieving 38.30 and 85.62% degradation, respectively, compared with 0.0% (4-CP) and 70.56% (crude oil) achieved by TiO2. The efficiency of TiO2 in degrading crude oil was mainly due to adsorption along with photolysis. This study provides a simple and cost-effective alternative to traditional remediation methods requiring high energy consumption for remediation of crude oil-polluted water and refinery wastewater using visible-light photocatalysis along with adsorption.

Review on the oxidative catalysis methods of converting lignin into vanillin

Vanillin plays an important role not only in food and flavouring, but also as a platform compound for the synthesis of other valuable products, mainly derived from the oxidative decarboxylation of petroleum-based guaiacol production. In order to alleviate the problem of collapsing oil resources, the preparation of vanillin from lignin has become a good option from the perspective of environmental sustainability, but it is still not optimistic in terms of vanillin production. Currently, catalytic oxidative depolymerization of lignin for the preparation of vanillin is the main development trend. This paper mainly reviews four ways of preparing vanillin from lignin base: alkaline (catalytic) oxidation, electrochemical (catalytic) oxidation, Fenton (catalytic) oxidation and photo (catalytic) oxidative degradation of lignin. In this work, the working principles, influencing factors, vanillin yields obtained, respective advantages and disadvantages and the development trends of the four methods are systematically summarized, and finally, several methods for the separation and purification of lignin-based vanillin are briefly reviewed.

Interspersing CdS nanodots into iodine vacancy-rich BiOI sphere for photocatalytic lignin valorization

Flower-like BiOI was decorated by CdS nanodots and followed by the introduction of iodine vacancies (V_I) for photocatalytic sodium lignosulfonate (SLS) valorization under visible light. The iodine vacancies could adjust the band configuration, strengthen the light absorption and act as electron traps, while the intimate contact between BiOI and CdS nanodots provides a high-speed channel for charge transfer. As a consequence, the photocatalytic performance of SLS conversion into value-added vanillin was greatly improved over CdS/BiOI-V_I compared with those of CdS, BiOI and CdS/BiOI. The highest yield of vanillin is 10.95 mg/g_SLS over CdS/BiOI-V_I, about 5, 8.7, 1.3 times those of CdS, BiOI, CdS/BiOI, respectively, and exceeding most related photocatalysts reported elsewhere. More significantly, as to the lignin from Masson pine and alkali lignin, the corresponding vanillin yield can reach 7.04 and 6.54 mg/g_lignin, respectively, under the same condition, which suggests the great potential and universality for photocatalytic lignin valorization over such CdS/BiOI-V_I heterostructure.

Improvement of Photocatalytic Performance by Building Multiple Heterojunction Structures of Anatase-Rutile/BiOI Composite Fibers

In this study, multiple heterojunction structures of anatase-rutile/Bismuth oxyiodide (BiOI) composite fibers are designed by the combined method of electrospinning and hydrothermal techniques. The influence of different Ti/Bi atomic ratios ([Ti/Bi]) on the nanostructures and photocatalytic properties are investigated. It is found that the morphology of BiOI covered on the TiO₂ fiber surface changed with [Ti/Bi] from nanosheets to submicron spheres structures. Additionally, the crystallization of the composite fibers including the phases of anatase, rutile, and BiOI is identified, theses phases are in close contact with each other, and the interfacial effects are helpful to form the multiple heterojunctions which lead to blue shifts on the chemical state of Ti. The absorption of visible light has been improved by compositing BiOI on TiO₂, while the band gap values of the composite fibers are significantly reduced, which can enhance the generation and separation of electrons and holes. For the case of [Ti/Bi] = 1.57, the photodegradation rate of anatase-rutile/BiOI composite fibers is about 12 times that of pure TiO₂. For the photocatalytic mechanism, the synergistic s-type heterojunctions increase the content of active oxides which have a positive effect on the degradation rate.

Single-atom palladium anchored N-doped carbon towards oxygen electrocatalysis for rechargeable Zn-air batteries

Herein, an atomically dispersed palladium catalyst on a hierarchical porous structure of N-doped carbon (Pd₁/N-C) is prepared using a facile freeze-drying-assisted strategy. Freeze-drying methods not only suppress the aggregation of Pd atoms but also successfully produce abundant nanopores. HAADF-STEM confirms that Pd single atoms are uniformly anchored on the N-C surface. The Pd₁/N-C electrocatalyst enhances the ORR and OER activity and durability compared to N-C and Pd-NPs/N-C. Rechargeable Zn-air batteries (ZABs) based on novel Pd₁/N-C exhibit a peak power density of 113.7 mW cm^-2 and maintain a voltage efficiency of 64.0% after 495 cycles at a discharge current density of 5 mA cm^-2. Besides, two ZABs in series can supply an LED light for at least 170 h.

Cellulose-Derived Carbon Dot-Guided Growth of ZnIn2 S4 Nanosheets for Photocatalytic Oxidation of 5-Hydroxymethylfurfural into 2,5-Diformylfuran

Cellulose-derived carbon (CC) dot-directed growth of ZnIn₂ S₄ was achieved through hydrothermal treatment of carboxylated cellulose followed by in situ growth of ZnIn₂ S₄ nanosheets. The carbon dots inherited from carboxylated cellulose equip plenty of surface carboxyl groups, which induce the ionic interaction with Zn²⁺ and In³⁺ and the guided growth of ZnIn₂ S₄ . As a result, the nanosheets of ZnIn₂ S₄ are evenly and intimately grown on the small carbon dots, providing high-speed channels for charges transfer. In conjunction with the reinforced visible-light capture and good conductivity of carbon dots, the resultant CC/ZnIn₂ S₄ shows an outstanding photocatalytic activity. As a proof-of-concept, visible-light-driven 5-hydroxymethylfurfural oxidation into 2,5-diformylfuran was conducted. The evolution of 2,5-diformylfuran over the optimal CC/ZnIn₂ S₄ sample can reach ∼2980 μmol g^-1 , about 3.4 times that of pristine ZnIn₂ S₄ . Additionally, the apparent quantum yield could attain 3.4 % at a wavelength of 400 nm.

Self-Induced Oxygen Vacancies on Carboxyl-Rich MIL-121 Enable Efficient Activation and Oxidation of Benzyl Alcohol under Visible Light

The oxygen vacancies could efficiently drive the photocatalytic oxidation of aromatic alcohol through the activation of reactants. However, the activation between aromatic alcohol and O₂ (oxidant) over oxygen vacancies is rarely studied. Herein, the ZnIn₂S₄/MIL-121 heterostructure with abundant surface uncoordinated carboxyl was rationally designed for benzyl alcohol (BA) oxidation under visible light. Oxygen vacancies on catalysts were self-induced after the surface complexation between the uncoordinated carboxyl and BA molecules. Based on the reaction results, it is concluded that the oxygen vacancy activation to BA is more effective than that to O₂ for BA oxidation over ZnIn₂S₄/MIL-121 hybrids. Specifically, when the activation fully occurs on BA (reaction in N₂), an admirable conversion of 93.9% (corresponding production rate of benzaldehyde: 2348 μmol·g^-1·h^-1) is achieved, which is 3.4 times that of pure ZnIn₂S₄, whereas an inferior conversion of 45.9% is obtained in O₂ due to the competition effect between O₂ and BA for oxygen vacancies.

Amino-functionalized Ti-metal-organic framework decorated BiOI sphere for simultaneous elimination of Cr(VI) and tetracycline

A subtle flower-like MIL-125-NH₂@BiOI was fabricated by a facile solvothermal method for simultaneously eliminating Cr(VI)/tetracycline mixed pollutants under visible light. The strong interaction between amino in MIL-125-NH₂ and Bi³⁺ of BiOI promotes the formation of this unique inlaid structure and enables the favorable contact between MIL-125-NH₂ and BiOI, thus accelerating the transfer of charge carriers. Remarkably, MIL-125-NH₂@BiOI displays a superior activity compared with that of two monomers for the photocatalytic reduction of Cr(VI) and degradation of tetracycline. More significantly, the photocatalytic efficiency can be further boosted in the coexistence of Cr(VI) and tetracycline, which is 1.8 and 1.6 times that of single Cr(VI) and tetracycline, respectively. The synergistic effect between Cr(VI) reduction and tetracycline oxidative degradation can further facilitate the separation of photo-induced electrons and holes, resulting in the improved efficiencies in the Cr(VI)/tetracycline coexistent environment. This work sheds light on that MOF-based photocatalysts possess huge potential for practical environmental remediation.