Halloysite nanotubes as nanoreactors for heterogeneous micellar catalysis

Polybenzimidazole Composite Separators Engineered from MOFs-HNTs Composites Applicated in Lithium-Ion Batteries

Incorporating inorganic nanostructured materials into polymeric separators for lithium-ion batteries (LIBs) enhances properties such as ionic conductivity, electrolyte wettability, and thermal resistance. However, poor interfacial compatibility between inorganic materials and the polymeric matrix remains a significant challenge. In this study, Zr-based UiO-66 metal-organic frameworks (MOFs) is employed as an interfacial binder between halloysite nanotubes (HNTs) and a poly-(arylene ether benzimidazole) (OPBI) matrix, preparing porous separators using the non-solvent phase separation (NIPS) method. The UiO-66 MOFs promote strong adhesion of HNTs to the OPBI chains, creating a more cohesive inorganic-organic system, as confirmed by molecular dynamics (MD) simulations of binding energy. The resulting OPBI@M-H10 composite separator exhibits high porosity (80%), an electrolyte absorption capacity of 377%, and an ionic conductivity of 1.59 mS·cm⁻¹. Furthermore, LiFePO4 half-cells assembled with this composite separator show a discharge capacity of 161 mAh·g⁻¹ and a retention rate of 97.96% after 200 charge-discharge cycles. The separator also demonstrates excellent electrode stability in the plating/stripping test of Li symmetric cells, lasting up to 1600 hours and effectively inhibiting dendrite growth on the Li anode. This approach provides a promising solution for high-performance LIBs separators and paves the way for advancements in LIBs technology and energy storage applications.

Conversion of VOC-derived CO2 into sustainable products with a natural magnetic alginate composite

In this study, we developed a sustainable nanocatalyst, AXFe, by functionalizing magnetite nanoparticles with an alginate-xanthine conjugate (AX). This hybrid material combines magnetite's adsorption and photocatalytic properties with the CO2 fixation capabilities of alginate and xanthine. AXFe exhibited exceptional performance in the photocatalytic mineralization of toluene under simulated solar irradiation, achieving a 61.5 % conversion to CO2. Furthermore, the catalyst facilitated efficient CO2 fixation into cyclic carbonates, achieving high yields under mild conditions (70 °C, 1 atm CO2). CO2 adsorption studies revealed enhanced capture efficiency due to the synergistic interaction between AX and magnetite. The material also demonstrated excellent reusability, enabling magnetic recovery and maintaining over 90 % catalytic activity for four cycles. This straightforward synthesis from natural substrates and its versatility in tackling VOCs and CO2 highlight AXFe as a promising tool for sustainable pollution mitigation and resource recovery. This dual-functionality catalysis significantly enhances the overall process efficiency while adhering to the core principles of green chemistry. By combining environmental sustainability with high performance, AXFe emerges as an up-and-coming candidate for mitigating environmental pollution through innovative and sustainable solutions.

Halloysite functionalized with dendritic moiety containing vitamin B1 hydrochloride as a bio-based catalyst for the synthesis of 5-hydroxymthylfurfural

Using halloysite clay and vitamin B1 hydrochloride, a novel acidic halloysite-dendrimer catalytic composite has been developed for conversion of fructose to 5-hydroxymthylfurfural. To grow the dendritic moiety on halloysite, it was first functionalized and then reacted with melamine, epichlorohydrin and vitamin B1 hydrochloride respectively. Then, the resulting composite was treated with ZnCl2 to furnish Lewis acid sites. Use of vitamin B1 as the cationic moiety of ionic liquid obviated use of toxic chemicals and resulted in more environmentally friendly composite. Similarly, dendritic moiety of generation 2 was also grafted on halloysite and the activity of both catalysts for conversion of fructose to 5-hydroxymthylfurfural was investigated to disclose the role of dendrimer generation. For the best catalytic composite, the reaction variables were optimized via RSM and it was revealed that use of 0.035 g catalyst per 0.1 g fructose at 95 °C furnished HMF in 96% yield in 105 min. Turnover numbers (TONs) and frequencies (TOFs) were estimated to be 10,130 and 5788 h-1, respectively. Kinetic studies also underlined that Ea was 22.85 kJ/mol. The thermodynamic parameters of Δ H ≠ , Δ S ≠ and Δ G ≠ , were calculated to be 23 kJ/mol, - 129.2 J/mol and 72.14 kJ/mol, respectively. Notably, the catalyst exhibited good recyclability and hot filtration approved heterogeneous nature of catalysis.

Comparison of Synthetic Pathways for Obtaining Fluorescent Nanomaterials Based on Halloysite and Carbon Dots for Potential Biological Sensing

Recently, fluorescent sensors have gained considerable attention due to their high sensitivity, low cost and noninvasiveness. Among the different materials that can be used for this purpose, carbon dots (CDs) represent valuable candidates for applications in sensing. These, indeed, are easily synthesized, show high quantum yield and are highly biocompatible. However, it was pointed out that the photoluminescence properties of these nanomaterials are strictly dependent on the synthetic and purification methods adopted. The presence of halloysite nanotubes (HNTs), a natural, low cost and biocompatible clay mineral, has been found to be efficient in obtaining small and highly monodispersed CDs without long and tedious purification techniques. Herein, we report the comparison of synthetic pathways for obtaining halloysite-N-doped CDs (HNTs-NCDs) that could be used in biological sensing. One was based on the synthesis of N-doped CDs by a bottom-up approach on HNTs' surface by a MW pyrolysis process; the other one was based on the post-modification of pristine N-doped CDs with halloysite derivatives. The evaluation of the best synthetic route was performed by different physico-chemical techniques. It was found that the bottom-up approach led to the formation of N-doped CDs with different functional groups onto the HNTs' surface. This evidence was also translated in the different fluorescence quantum yields and the existence of several functional groups in the obtained materials was investigated by potentiometric titrations. Furthermore, the ability of the synthesized nanomaterials as sensors for Fe3+ ions detection was assessed by spectroscopic measurements, and the cellular uptake was verified by confocal/fluorescence microscopies as well.

Polyethyleneimine in designed nanocomposite based magnetic halloysite nanotubes for extraction and determination of gallic acid in green tea

An innovative and simple nanocomposite denoted as MHNTs@PEI was synthesized for gallic acid (GA) analytical sample pretreatment. Polyethyleneimine (PEI) functionalized was binded onto magnetic halloysite nanotubes (MHNTs) to inhence adsorption capacity. MHNTs@PEI was obtained only through two steps modification (amination and PEI modification). Characterizations showed that there are layers of synthetic PEI on the tubular structure of the material and magnetic spheres on its surface, both indicating successful synthesis of the nanocomposite. Furthermore, the adsorption isotherms and kinetic modeling showed that the Langmuir model and pseudo-first-order model fit the adsorption data, respectively. MHNTs@PEI achieved an adsorption capacity of 158 mg·g-1. Overall, the abundant adsorption sites significantly improved the adsorption performance of the MHNTs@PEI. Regeneration tests demonstrated that the MHNTs@PEI exhibits effective adsorption, even after undergoing five consecutive cycles. Optimization of key parameters (ratio, volume of elution, elution time and frequency) in the process of adsorption and desorption was also conducted. The limit of detection (LOD) and that of the quantification (LOQ) were 0.19 and 0.63 μg·mL-1, respectively, and the recoveries were 95.67-99.43 %. Finally, the excellent magnetism (43.5 emu·g-1) and the adsorption feature of MHNTs@PEI enabled its successful utilization in analytical sample pretreatment through the extraction of GA from green tea.

Chitosan-coated halloysite nanotube magnetic microspheres for carcinogenic colorectal hemorrhage and liver laceration in albino rats

Carcinogenic colorectal hemorrhage can cause severe blood loss and longitudinal ulcer, which ultimately become fatal if left untreated. The present study was aimed to formulate targeted release gemcitabine (GC)-containing magnetic microspheres (MM) of halloysite nanotubes (MHMG), chitosan (MCMG), and their combination (MHCMG). The preparation of MM by magnetism was confirmed by vibrating sample magnetometry (VSM), the molecular arrangement of NH2, alumina, and silica groups was studied by X-ray diffraction (XRD) and energy-dispersive spectroscopy (EDS), the hollow spherical nature of the proposed MM was observed by scanning electron microscopy (SEM), functional groups were characterized by Fourier transform infrared (FTIR) spectroscopy and thermochemical modification was studied by thermogravimetric analysis (TGA). In vitro thrombus formation showed a decreasing trend of hemostatic time for MMs in the order of MHMG3 < MCMG3 < MHCMG7, which was confirmed by whole blood clotting kinetics. Interestingly, rat tail amputation and liver laceration showed 3 folds increased clotting efficiency of optimized MHCMG7 compared to that of control. In vivo histopathological studies and cell viability assays confirmed the regeneration of epithelial cells. The negligible systemic toxicity of MHCMG7, more than 90% entrapment of GC and high % release in alkaline medium made the proposed MM an excellent candidate for the control of hemorrhage in colorectal cancer. Conclusively, the healing of muscularis and improved recovery of the colon from granulomas ultimately improved the therapeutic effects of GC-containing MMs. The combination of both HNT and CTS microspheres made them more targeted.

Nickel Oxide Decorated Halloysite Nanotubes as Sulfur Host Materials for Lithium-Sulfur Batteries

Lithium-sulfur batteries with high energy density still confront many challenges, such as polysulfide dissolution, the large volume change of sulfur, and fast capacity fading in long-term cycling. Herein, a naturally abundant clay material, halloysite, is introduced as a sulfur host material in the cathode of Li-S batteries. Nickel oxide nanoparticles are embedded into the halloysite nanotubes (NiO@Halloysite) by hydrothermal and calcination treatment to improve the affinity of halloysite nanotubes to polysulfides. The NiO@Halloysite composite loaded with sulfur (S/NiO@Halloysite) is employed as the cathode of Li-S batteries, which combines the physical confinements of tubular halloysite particles and good chemical adsorption ability of NiO. The S/NiO@Halloysite electrode exhibits a high discharge capacity of 1205.47 mAh g^-1 at 0.1 C. In addition, it demonstrates enhanced cycling stability, retaining ≈60% of initial capacity after 450 cycles at 0.5 C. The synthesized NiO@Halloysite can provide a promising prospect and valuable insight into applying natural clay materials in Li-S batteries.

Keratin/alginate hybrid hydrogels filled with halloysite clay nanotubes for protective treatment of human hair

Keratin/alginate hydrogels filled with halloysite nanotubes (HNTs) have been tested for the protective coating of human hair. Preliminary studies have been conducted on the aqueous colloidal systems and the corresponding hydrogels obtained by using Ca²⁺ ions as crosslinkers. Firstly, we have investigated the colloidal properties of keratin/alginate/HNTs dispersions to explore the specific interactions occurring between the biomacromolecules and the nanotubes. Then, the rheological properties of the hydrogels have been studied highlighting that the keratin/alginate interactions and the subsequent addition of HNTs facilitate the biopolymer crosslinking. Finally, human hair samples have been treated with the hydrogel systems by the dipping procedure. The protection efficiency of the hydrogels has been evaluated by studying the tensile properties of hair fibers exposed to UV irradiation. In conclusion, keratin/alginate hydrogel filled with halloysite represents a promising formulation for hair protective treatments due to the peculiar structural and rheological characteristics.

Fabrication of a magnetic alginate-silk fibroin hydrogel, containing halloysite nanotubes as a novel nanocomposite for biological and hyperthermia applications

In this study, the main focus was on designing and synthesizing a novel magnetic nanobiocomposite and its application in hyperthermia cancer treatment. Regarding this aim, sodium alginate (SA) hydrogel with CaCl₂ cross-linker formed and modified by silk fibroin (SF) natural polymer and halloysite nanotubes (HNTs), followed by in situ Fe₃O₄ magnetic nanoparticles preparation. No important differences were detected in red blood cells (RBCs) hemolysis, confirming the high blood compatibility of the treated erythrocytes with this nanobiocomposite. Moreover, the synthesized SA hydrogel/SF/HNTs/Fe₃O₄ nanobiocomposite does not demonstrate toxicity toward HEK293T normal cell line after 48 and 72 h. The anticancer property of SA hydrogel/SF/HNTs/Fe₃O₄ nanobiocomposites against breast cancer cell lines was corroborated. The magnetic saturation of the mentioned magnetic nanobiocomposite was 15.96 emu g⁻¹. The specific absorption rate (SAR) was measured to be 22.3 W g⁻¹ by applying an alternating magnetic field (AMF). This novel nanobiocomposite could perform efficiently in the magnetic fluid hyperthermia process, according to the obtained results.

Architectural design of core-shell nanotube systems based on aluminosilicate clay

A nanoarchitectural approach to the design of functional nanomaterials based on natural aluminosilicate nanotubes and their catalysis, and practical applications are described in this paper. We focused on the buildup of hybrid core-shell systems with metallic or organic molecules encased in aluminosilicate walls, and nanotube templates for structured silica and zeolite preparation. The basis for such an architectural design is a unique Al₂O₃/SiO₂ dual chemistry of 50 nm diameter halloysite tubes. Their structure and site dependent properties are well combined with biocompatibility, environmental safety, and abundant availability, which makes the described functional systems scalable for industrial applications. In these organic/ceramic hetero systems, we outline drug, dye and chemical inhibitor loading inside the clay nanotubes, accomplished with their silane or amphiphile molecule surface modifications. For metal-ceramic tubule composites, we detailed the encapsulation of 2-5 nm Au, Ru, Pt, and Ag particles, Ni and Co oxides, NiMo, and quantum dots of CdZn sulfides into the lumens or their attachment at the outside surface. These metal-clay core-shell nanosystems show high catalytic efficiency with increased mechanical and temperature stabilities. The combination of halloysite nanotubes with mesoporous MCM-41 silica allowed for a synergetic enhancement of catalysis properties. Finally, we outlined the clay nanotubes' self-assembly into organized arrays with orientation and ordering similar to nematic liquid crystals, and these systems are applicable for life-related applications, such as petroleum spill bioremediation, antimicrobial protection, wound healing, and human hair coloring.

Probing Diffusive Dynamics of Natural Tubule Nanoclays with Machine Learning

Reproducibility of the experimental results and object of study itself is one of the basic principles in science. But what if the object characterized by technologically important properties is natural and cannot be artificially reproduced one-to-one in the laboratory? The situation becomes even more complicated when we are interested in exploring stochastic properties of a natural system and only a limited set of noisy experimental data is available. In this paper we address these problems by exploring diffusive motion of some natural clays, halloysite and sepiolite, in a liquid environment. By using a combination of dark-field microscopy and machine learning algorithms, a quantitative theoretical characterization of the nanotubes' rotational diffusive dynamics is performed. Scanning the experimental video with the gradient boosting tree method, we can trace time dependence of the diffusion coefficient and probe different regimes of nonequilibrium rotational dynamics that are due to contacts with surfaces and other experimental imperfections. The method we propose is of general nature and can be applied to explore diffusive dynamics of various biological systems in real time.

Printable Hydrogels Based on Alginate and Halloysite Nanotubes

The design of hydrogels for the controlled release of active species is an attractive challenge. In this work, we prepared hybrid hydrogels composed of halloysite nanotubes as the inorganic component, and alginate as the organic counterpart. The reported procedure allowed us to provide the resulting materials with a peculiar wire-like shape. Both optical and scanning electron microscopy were used to characterize the morphological properties of the hydrogel wires, whose diameters were ca. 0.19 and 0.47 mm, respectively. The possibility to be exploited as drug delivery systems was carried out by loading the nanoclay with salicylic acid and by studying the release profiles. Thermogravimetric experiments showed that the amount of encapsulated drug was 4.35 wt%, and the salicylic acid was thermally stabilized after the loading into the nanotubes, as observed by the shift of the degradation peak in the differential thermograms from 193 to 267 °C. The kinetics investigation was conducted using UV–Vis spectrophotometry, and it exhibited the profound effects of both the morphology and dimensions on the release of the drugs. In particular, the release of 50% of the payload occurred in 6 and 10 h for the filiform hydrogels, and it was slower compared to the bare drug-loaded halloysite, which occurred in 2 h. Finally, an induction period of 2 h was observed in the release profile from the thicker sample.

Inclusion complexes of triblock L35 copolymer and hydroxyl propyl cyclodextrins: a physico-chemical study

Polypseudorotaxanes based on triblock L35 copolymer and hydroxyl propyl-modified cyclodextrins (HP-α-CD and HP-β-CD) have been characterized. Their physico-chemical properties have been correlated to the threading process.

Characterization of Three Amu-Darya Basin Clays in Ceramic Brick Industry and Their Applications with Brick Waste

This study examined the chemical, mineralogical, physical, thermal, and technological characteristics of the Dostluk (DM), Halach (HM), and Sakar (HM) clay deposits located in the Amu-Darya basin of Turkmenistan. The potential suitability of these deposits was evaluated for the local ceramic brick industry. The chemical and mineralogical features were identified by X-ray fluorescence (XRF), ion chromatography (IC), energy-dispersive X-ray spectroscopy (EDS), and X-ray diffraction (XRD) techniques. The physical properties were characterized by granulometric analysis by sieving, particle size distribution, scanning electron microscopy/optic analysis, specific surface area, Pfefferkon’s plasticity index, reabsorption, shrinkage, water absorption, mechanical (compression and bending), and freeze–thaw durability tests. The thermal methods were performed using dilatometry and thermogravimetric/differential thermal analyzer (TG/DTA). The test samples for the different clay deposits were extruded, dried, and fired at three different temperatures of 850 °C, 950 °C, and 1050 °C. While the Dostluk and Sakar clays have high plasticity, Halach clay has been found to have low plasticity. The mechanical and freeze–thaw durability tests demonstrated that the outcomes of the clays of different origins were sufficient, achieving compressive strengths of over 10 MPa and mass loss less than 3%, which are acceptable by industry standards. Semi-industrial processed hollow bricks demonstrated promising characteristics. While the Dostluk and Sakar clay-based brick specimens were visibly free of cracks, the Halach specimens showed some cracks. The physical and mechanical improvements of these clays were performed with three mixtures, which are M1 (80 mass% DM + 20 mass% brick waste), M2 (85 mass% SM + 15 mass% brick waste), and M3 (70 mass% HM + 25 mass% SM and 5 mass% brick waste) for the brick industry.

Conversion of Organic Dyes into Pigments: Extraction of Flavonoids from Blackberries (Rubus ulmifolius) and Stabilization

The blackberry’s color is composed mainly of natural dyes called anthocyanins. Their color is red–purple, and they can be used as a natural colorant. Anthocyanins are flavonoids, which are products of plants, and their colors range from orange and red to various shades of blue, purple and green, according to pH. In this study, the chemical composition of an extract obtained from blackberries was defined by LC-ESI/LTQOrbitrap/MS in positive and negative ionization mode. Furthermore, we investigated the adsorption process of blackberry extract using several inorganic fillers, such as metakaolin, silica, Lipari pumice, white pozzolan and alumina. The pigments exhibit different colors as a function of their interactions with the fillers. The analysis of the absorption data allowed the estimation of the maximum adsorbing capacity of each individual filler tested. Through thermogravimetric measurements (TGA), the thermal stability and the real adsorption of the organic extract were determined.