High efficient arsenic removal by In-layer sulphur of layered double hydroxide

In-situ immobilization of arsenic and antimony containing acid mine drainage through chemically forming layered double hydroxides

Acid mine drainage (AMD) rich in arsenic (As) and antimony (Sb) is considered as a significant environmental challenge internationally. However, simultaneous removal of As and Sb from AMD is still inadequately studied. In this study, a highly effective and simple approach was proposed for mitigating As and Sb-rich AMD, which involves in-situ formation of layered double hydroxides (LDHs). Following the treatment, the residual concentrations of iron (Fe), magnesium (Mg), sulfate, As and Sb in field AMD were decreased from their initial concentrations of 1690, 1524, 2055, 7.8 and 10.6 mg L-1, respectively, to 1.3, 12.4, 623, 0.006 and 0.004 mg L-1, respectively. Chemical formula of the resulting As and Sb-loaded LDHs can be identified as Mg4.226Fe2.024OH2SO4AsSb0.006∙mH2O. The dissolution rates of metal(loid)s in As and Sb-loaded LDH were lower than 1% under strongly acidic and alkaline environments. In presence of the mixed adsorbates, the As immobilization capacity by LDHs was significantly decreased, with an apparent intervention from Sb. However, As did not have a significant effect on the immobilization of Sb by LDH. As was immobilized by LDHs through anion exchange and complexation with -OH groups, while Sb was captured by anion exchange and complexation with [Formula: see text] . Density functional theory (DFT) calculations further proved the above conclusions. This novel approach is effective and can be applied for in-situ AMD treatment from abandoned mines.

Low Temperature Processing of Iron Oxide Nanoflakes from Red Mud Extract toward Favorable De-arsenification of Water

Iron oxide (α-Fe2O3) was synthesized from red mud extract followed by hydrothermal reaction at 150 °C/6-24 h in the presence of NH4OH. The crystallinity of α-Fe2O3 increased with reaction time as confirmed by X-ray Diffraction, while Fourier transform infrared spectroscopy and Raman illustrate the symmetric stretching vibration of the Fe-O bond in α-Fe2O3. The X-ray photoelectron spectroscopic analysis shows O 1s spectra at 530.6, 531.2, and 532 eV, signifying the lattice oxygen in Fe-O, surface oxygen defects, and oxygen in adsorbed hydroxyl groups, respectively. The morphology of α-Fe2O3 nanoflakes was noticed from field emission scanning electron microscopy and transmission electron microscopy. The developed particles reveal the BET surface area in the range of 136-347 m2/g. The maximum As(V) adsorption capacity of 32-41 mg/g was obtained for adsorbent dose of 0.25 g/L. The arsenic level could be lowered down to 2-3 μg/L (<10 μg/L as per WHO's limit) with contaminated real water (64 μg/L) using 0.25 g/L of sample dose within 5 min of adsorption.

Groundwater arsenic contamination: impacts on human health and agriculture, ex situ treatment techniques and alleviation

Groundwater is consumed by a large number of people as their primary source of drinking water globally. Among all the countries worldwide, nations in South Asia, particularly India and Bangladesh, have severe problem of groundwater arsenic (As) contamination so are on our primary focus in this study. The objective of this review study is to provide a viewpoint about the source of As, the effect of As on human health and agriculture, and available treatment technologies for the removal of As from water. The source of As can be either natural or anthropogenic and exposure mediums can either be air, drinking water, or food. As-polluted groundwater may lead to a reduction in crop yield and quality as As enters the food chain and disrupts it. Chronic As exposure through drinking water is highly associated with the disruption of many internal systems and organs in the human body including cardiovascular, respiratory, nervous, and endocrine systems, soft organs, and skin. We have critically reviewed a complete spectrum of the available ex situ technologies for As removal including oxidation, coagulation-flocculation, adsorption, ion exchange, and membrane process. Along with that, pros and cons of different techniques have also been scrutinized on the basis of past literatures reported. Among all the conventional techniques, coagulation is the most efficient technique, and considering the advanced and emerging techniques, electrocoagulation is the most prominent option to be adopted. At last, we have proposed some mitigation strategies to be followed with few long and short-term ideas which can be adopted to overcome this epidemic.

Multifunctional Cross-Linked Shrimp Waste-Derived Chitosan/MgAl-LDH Composite for Removal of As(V) from Wastewater and Antibacterial Activity

This work synthesized a novel chitosan-loaded MgAl-LDH (LDH = layered double hyroxide) nanocomposite, which was physicochemically characterized, and its performance in As(V) removal and antimicrobial activity was evaluated. Chitosan-loaded MgAl-LDH nanocomposite (CsC@MgAl-LDH) was prepared using cross-linked natural chitosan from shrimp waste and modified by Mg-Al. The main mechanisms predominating the separation of As(V) were elucidated. The characteristic changes confirming MgAl-LDH modification with chitosan were analyzed through Fourier transform infrared spectroscopy, X-ray diffraction, thermogravimetric analysis-differential thermal analysis, and Brunauer-Emmett-Teller measurements. Porosity and the increased surface area play an important role in arsenic adsorption and microbial activity. Adsorption kinetics follows the general order statistically confirmed by Bayesian Information Criterion differences. To understand the adsorption process, Langmuir, Freundlich, and Liu isotherms were studied at three different temperatures. It was found that Liu's isotherm model was the best-fitted model. CsC@MgAl-LDH showed the maximum adsorption capacity of 69.29 mg g^-1 toward arsenic at 60 °C. It was observed that the adsorption capacity of the material rose with the increase in temperature. The spontaneous behavior and endothermic nature of adsorption was confirmed by the thermodynamic parameters study. Minimal change in percentage removal was observed with coexisting ions. The regeneration of material and adsorption-desorption cycles revealed that the adsorbent is economically efficient. The nanocomposite was very effective against Staphylococcus aureus and Bacillus subtilus.