Three-phase interface photocatalysis for the enhanced degradation and antibacterial property

A Shape-Restorable hierarchical polymer membrane composite system for enhanced antibacterial and antiadhesive efficiency

Intelligent shape memory polymer can be potentially used in manufacturing implantable devices that enables a benign variation of implant dimensions with the external stimuli, thus effectively lowering insertion forces and evading associated risks. However, in surgical implantation, biomaterials-associated infection has imposed a huge burden to healthcare system that urgently requires an efficacious replacement of antibiotic usages. Preventing the initial attachment and harvesting a biocidal function upon native surfaces may be deemed as a preferable strategy to tackle the issues of bacterial infection. Herein, a functionalized polylactic acid (PLA) composite membrane assembled with graphene (GE, a widely used photothermal agent) was fabricated through a blending process and then polydimethylsiloxane utilized as binders to pack hydrophobic SiO2 tightly onto polymer surface (denoted as PLA-GE/SiO2). Such an active platform exhibited a moderate shape-memory performance upon near-infrared (NIR) light stimulation, which was feasible for programmed deformation and shape recovery. Particularly stirring was that PLA-GE/SiO2 exerted a pronounced bacteria-killing effect under NIR illumination, 99.9 % of E. coli and 99.8 % of S. aureus were effectively eradicated in a lean period of 5 min. Furthermore, the obtained composite membrane manifested excellent antiadhesive properties, resulting in a bacteria-repelling efficacy of up to 99 % for both E. coli and S. aureus species. These findings demonstrated the potential value of PLA-GE/SiO2 as a shape-restorable platform in "kill&repel" integration strategy, further expanding its applications for clinical anti-infective treatment.

Floating photocatalysts as promising materials for environmental detoxification and energy production: A review

The oxygenation process of the catalyst surface, the incident-light harvesting capability, and facile recycling of utilized photocatalysts play key role in the outstanding photocatalytic performances. The typical existing photocatalysts in powder form have many drawbacks, such as difficult separation from the treated water, insufficient surface oxygenation, poor active surface area, low incident-light harvesting ability, and secondary pollution of the environment. A great number of scientific works introduced novel and fresh ideas related to designing floating photocatalytic systems by immobilizing highly active photocatalysts onto a floatable substrate. Thanks to direct contact with the illuminated light and oxygen molecules in the interface of water/air, the photocatalytic performance is maximized through production of more reactive species, employed in the photocatalytic reactions. Furthermore, facile recovering of the utilized photocatalysts for next processes avoids secondary pollution as well as diminishes the process's price. This review highlights the performance of developed floating photocatalysts for diverse applications. Furthermore, different floating substrates and possible mechanisms in floating photocatalysts are briefly mentioned. In addition, several emerging self-floating photocatalytic systems are taken attention and discussed. Specially, coupling photo-thermal and photocatalytic effects seems to be a good strategy for introducing a new class of floating photocatalyst to utilize the free, abundant, and green sunlight energy for the aims of water desalination and purification. Despite of a large number of attempts about the floating photocatalysts, there are still plenty of rooms for more in-depth research to be carried out for attaining the required characteristics of the large scale utilizations of these materials.

Cotton Cloth@ Polydimethylsiloxane -Graphene Flakes- Titanium Dioxide Composite Membrane for Wastewater Purification

Interfacial solar steam generation (ISSG) has been regarded as a simple and highly-efficient method for wastewater purification. Herein, we prepared a superhydrophobic composite membrane, in which polydimethylsiloxane employed as binders to pack graphite flakes and titanium dioxide tightly onto cotton cloth (defined as cotton cloth@PDMS-C-P25). Benefiting from its powerful photothermal effects, cotton cloth@PDMS-C-P25 exhibited high evaporation flux of 1.86 kg m-2 h-1 and 1.73 kg m-2 h-1 for pure water and seawater, respectively. Meanwhile, the prepared composite membrane fulfilled the targets of sewage purification set by its photocatalytic properties, which demonstrated a degradation rate of 66.1 % for Rhodamine B (RhB), and antibacterial efficiency of over 99.99 % for Escherichia coli (E. coli). Furthermore, cotton cloth@PDMS-C-P25 surface was endowed with superhydrophobic and low-adhesion characteristics mainly owing to the synergy of multiscale structure and low surface energy matter, which contribute to the anti-adhesion effect of 97.9 % for E. coli at a high concentration of 107 colony forming units (CFUs). In this work, the cost-effective, environmentally friendly, long-term stable, and superhydrophobic solar-absorber holds a potential prospect for wastewater treatment and desalination in a typical pollution-induced water shortage area.

Flexible self-healing nanocomposite based gelatin/tannic acid/acrylic acid reinforced with zinc oxide nanoparticles and hollow silver nanoparticles based on porous silica for rapid wound healing

In this research, gelatin (Ge), tannic acid (TA), acrylic acid (AA) as a matrix are used. Zinc oxide (ZnO) nanoparticles (10, 20, 30, 40 and 50 wt%) and hollow silver nanoparticles along with ascorbic acid (1, 3, and 5 wt%) are considered as reinforcement. In order to prove the functional groups of nanoparticles made from Fourier-transform infrared spectroscopy (FTIR), and determine the existing phases of the powders in the hydrogel, X-ray diffraction (XRD) is used, also to investigate the morphology, size, and porosity of the holes and in the scaffolds, scanning electron microscope analysis is used (FESEM). Then, mechanical tests such as tension and compression test are performed to determine the most optimal state of the composite. Also, the antibacterial test is performed for the manufactured powders and hydrogel, as well as the toxicity test for the fabricated hydrogel. The results show that the sample (30 wt% of zinc oxide and 5 wt% of hollow nanoparticles) is the most optimal hydrogel based on mechanical tests and biological properties.

PDINH bridged NH2-UiO-66(Zr) Z-scheme heterojunction for promoted photocatalytic Cr(VI) reduction and antibacterial activity

Z-scheme mechanism was a promising approach to considerably enhance photocatalytic activity. In this work, the PDINH/NH₂-UiO-66(Zr) (PNU) heterojunctions were made using a facile ball-milling method. As expect, the optimum PNU-1 composite acted as highly active photocatalyst with 97% Cr(VI) to be reduced within 60 min of LED light illumination. Moreover, the antibacterial rate almost reached 100% for E. coli and S. aureus in 4 h, which was more conspicuous than the others. The wider light absorption range, promoted charge separation because of Z-scheme mechanism and efficient generation of reactive ¹O₂, •O₂^-, and •OH contributed greatly to the enhanced photocatalytic activity. Meanwhile, the superior stability and repeatability of the composites were also demonstrated by five cyclic experiments and related physicochemical characterizations. Therefore, this work provides a novel insight for designing high-efficiency Z-scheme heterostructures between MOFs and organic PDINH for wastewater remediation.

Chitosan-based carbon nitride-polydopamine‑silver composite dressing with antibacterial properties for wound healing

Infection represents a major clinical barrier that delays wound healing, while the overuse of antibiotics can lead to bacterial resistance. Hence, it is of particular important to develop a new type of dressing to combat bacterial resistance. Herein, a carbon nitride-polydopamine‑silver complex (C₃N₄-PDA-Ag) was prepared using the photocatalyst C₃N₄ and silver nanoparticles (Ag NPs) to achieve a synergistic antimicrobial effect. The solution casting method was then employed to further modify the C₃N₄-PDA-Ag complex by compounding it with chitosan (CS), thereby forming a C₃N₄-PDA-Ag@CS film. The results revealed that the C₃N₄-PDA-Ag@CS film exhibits superior antibacterial activity against Staphylococcus aureus and Pseudomonas aeruginosa compared to the CS group. The hemolysis, cytotoxicity, and in vivo implantation experiments indicated that the composite film possesses excellent in vitro and in vivo biocompatibility. In addition, the composite dressing promoted wound healing in infected mice by facilitating collagen deposition and accelerating epidermal regeneration. Collectively, the findings of this study clearly demonstrate that the C₃N₄-PDA-Ag@CS composite dressing has excellent antibacterial properties, biocompatibility, and enhances wound healing, thus providing a strategy for the application of photocatalytic materials for the treatment of infected wounds.

ZIF-8-derived Cu, N co-doped carbon as a bifunctional cathode catalyst for enhanced performance of microbial fuel cell

The development of bifunctional catalysts is an effective way to simultaneously address the slow kinetics of oxygen reduction reaction (ORR) on the cathode and biofilm contamination in the microbial fuel cells (MFC). Cu-N/C@Cu composites were synthesized as bifunctional cathode catalysts for MFC by doping, adsorption, and two calcinations by using Cu-ZIF-8 as the precursor. The higher Cu-N_x content confers excellent ORR catalytic activity to the optimized Cu-N/C@Cu-2 catalyst. The half-wave potential for Cu-N/C@Cu-2 in a neutral solution is 0.67 V vs. RHE, which is close to that of commercial 20% Pt/C (0.70 V vs. RHE). The maximum power density of the MFCs assembled with Cu-N/C@Cu-2 reached 581 ± 13 mW m^-2, which is even better than that using Pt/C (499 ± 13 mW m^-2). Moreover, the results of antimicrobial activity and biomass test show that the higher Cu content made Cu-N/C@Cu-2 effective against the contamination of cathode biofilm. And the 16S rDNA results find that the community structure of the biofilm is favorable for the power production and purification of MFC. This work shows that copper-based materials can be used as potential bifunctional catalysts to promote MFC applications in wastewater treatment.