Defect engineering of P doped Fe7S8 porous nanoparticles for high-performance asymmetric supercapacitor and oxygen evolution electrocatalyst

Heterostructure Fe7S8/Mn(OH)2 of incomplete sulfurization induces Mn atoms with high density of states for enhancing oxygen evolution reaction and supercapacitor electrochemical performance

Heterostructures and the introduction of heterogeneous elements have been regarded as effective strategies to promote electrochemical performance. Herein, sulfur species are introduced by a simple hydrothermal vulcanization method, which constructs the open heterostructure Fe7S8/Mn(OH)2 as a bifunctional material. The open cordyceps-like morphology can make the material contact more sufficiently with the electrolyte, exposing a large number of reaction sites. Furthermore, the introduction of the heterogeneous element S successfully constructs a heterogeneous interface, the interface-modulated composite material consists of Mn atoms contributing the main density of states (DOS) near the Fermi energy level from the density functional theory (DFT) calculations, which optimizes the adsorption energy of oxygen-containing intermediates during the oxygen evolution reaction (OER) process and reduces the reaction energy barrier, being conducive to the improvement of the material's electrochemical properties. As predicted, the Fe7S8/Mn(OH)2 material exhibits remarkable electrochemical properties, such as an overpotential of 202 mV at 10 mA cm-2 for the oxygen evolution reaction and even a specific capacitance of 2198 F g-1 at 1 A g-1. This work provides new insights into the role of introducing sulfur species and controlling the structure of the material, and exemplifies novel design ideas for developing bifunctional materials for energy storage and conversion.

Stable Hierarchical Porous Heterostructure Ni2P/NC@CoNi2S4 Fabricated via the NiCo-LDH Template Strategy for High-Performance Supercapacitors

Transition metal phosphide/sulfide (TMP/TMS) heterostructures are attractive supercapacitor electrode materials due to their rapid redox reaction kinetics. However, the limited active sites and weak interfacial interactions result in undesirable electrochemical performance. Herein, based on constructing the NiCo-LDH template on Ni-MOF-derived Ni2P/NC, Ni2P/NC@CoNi2S4 with a porous heterostructure is fabricated by sulfurizing the intermediate and is used for supercapacitors. The exposed Ni sites in the phosphating-obtained Ni2P/NC coordinate with OH- to in situ form an intimate-connected Ni2P/NC@NiCo-LDH, and the CoNi2S4 nanosheets retaining the original cross-linked structure of NiCo-LDH integrate the porous carbon skeleton of Ni2P/NC to yield a hierarchical pore structure with rich electroactive sites. The conducting carbon backbone and the intense electronic interactions at the interface accelerate electron transfer, and the hierarchical pores offer sufficient ion diffusion paths to accelerate redox reactions. These confer Ni2P/NC@CoNi2S4 with a high specific capacitance of 2499 F·g-1 at 1 A·g-1. The NiCo-LDH template producing a tight interfacial connection, significantly enhances the stability of the heterostructure, leading to a 91.89% capacitance retention after 10,000 cycles. Moreover, the fabricated Ni2P/NC@CoNi2S4//NC asymmetric supercapacitor exhibits an excellent energy density of 73.68 Wh kg-1 at a power density of 700 W kg-1, superior to most reported composites of TMPs or TMSs.

Recent Progress of Transition Metal Selenides for Electrochemical Oxygen Reduction to Hydrogen Peroxide: From Catalyst Design to Electrolyzers Application

Hydrogen peroxide (H2O2) is a highly value-added and environmental-friendly chemical with various applications. The production of H2O2 by electrocatalytic 2e- oxygen reduction reaction (ORR) has emerged as a promising alternative to the energy-intensive anthraquinone process. High selectivity Catalysts combining with superior activity are critical for the efficient electrosynthesis of H2O2. Earth-abundant transition metal selenides (TMSs) being discovered as a classic of stable, low-cost, highly active and selective catalysts for electrochemical 2e- ORR. These features come from the relatively large atomic radius of selenium element, the metal-like properties and the abundant reserves. Moreover, compared with the advanced noble metal or single-atom catalysts, the kinetic current density of TMSs for H2O2 generation is higher in acidic solution, which enable them to become suitable catalyst candidates. Herein, the recent progress of TMSs for ORR to H2O2 is systematically reviewed. The effects of TMSs electrocatalysts on the activity, selectivity and stability of ORR to H2O2 are summarized. It is intended to provide an insight from catalyst design and corresponding reaction mechanisms to the device setup, and to discuss the relationship between structure and activity.

High-efficiency activated phosphorus-doped Ni2S3/Co3S4/ZnS nanowire/nanosheet arrays for energy storage of supercapacitors

Transition metal sulfides (TMS) have been considered as a promising group of electrode materials for supercapacitors as a result of their strong redox activity, but high volumetric strain of the materials during electrochemical reactions causes rapid structural collapse and severe capacity loss. Herein, we have synthesized phosphorus-doped (P-doped) Ni2S3/Co3S4/ZnS battery-type nanowire/nanosheet arrays as an advanced cathode for supercapacitor through a two-step process of hydrothermal and annealing treatments. The material has a one-dimensional nanowire/two-dimensional nanosheet-like coexisting microscopic morphology, which facilitates the exposure of abundant active centers and promotes the transport and migration of ions in the electrolyte, while the doping of P significantly enhances the conductivity of the electrode material. Simultaneously, the element phosphorus with similar atomic radii and electronegativity to sulfur may act as electron donors to regulate the electron distribution, thus providing more effective electrochemically active sites. In gratitude to the synergistic effect of microstructure optimization and electronic structure regulation induced by the doing of P, the P-Ni2S3/Co3S4/ZnS nanoarrays provide a superior capacity of 2716 F g-1 at 1 A/g, while the assembled P-Ni2S3/Co3S4/ZnS//AC asymmetric supercapacitor exhibits a high energy density of 48.2 Wh kg-1 at a power density of 800 W kg-1 with the capacity retention of 89 % after 9000 cycles. This work reveals a possible method for developing high-performance transition metal sulfide-based battery-like electrode materials for supercapacitors through microstructure optimization and electronic structure regulation.

N-doped carbon sheets supported P-Fe3O4-MoO2 for freshwater and seawater electrolysis

Electric-driven freshwater/seawater splitting is an attractive and sustainable route to realize the generation of H2 and O2. Molybdenum-based oxides exhibit poor activity toward freshwater/seawater electrolysis. Herein, we adjusted the electronic structure of MoO2 by constructing N-doped carbon sheets supported P-Fe3O4-MoO2 nanosheets (P-Fe3O4-MoO2/NC). P-Fe3O4-MoO2/N-doped carbon sheets were precisely prepared by pyrolysis of Schiff base Fe complex and MoO3 nanosheets through phosphorization. Benefiting from the unique structures of the samples, it required 119/145 mV to drive freshwater/seawater reduction reaction at 10 mA/cm2. P-Fe3O4-MoO2/NC catalysts exhibited superior freshwater/seawater oxidation reactivity with 180/189 mV at 10 mA/cm2 compared with commercial RuO2. The low cell voltages for P-Fe3O4-MoO2/NC were 1.47 and 1.59 V towards freshwater and seawater electrolysis, respectively. Our work might shed light on the structural modulation of Mo-based oxides for enhancing freshwater and seawater electrolysis activity.

Multi-omics study of sulfur metabolism affecting functional microbial community succession during aerobic solid-state fermentation

Microbial-mediated sulfur metabolism is closely related to carbon and nitrogen metabolism in natural biological systems. In this study, the effects of sulfur metabolism on microbial communities and functional enzyme succession were investigated based on integrated multi-omics by adding sulfur-containing compounds to aerobic fermentation systems. Sulfur powder was oxidized to S2O32- and subsequently to SO42- by the microbial sulfur-oxidizing system, which lowered the pH to 7.5 on day 7. The decrease in pH resulted in Planifilum (secreted S8, M17 and M32 proteases) losing its competitive advantage, whereas Novibacillus (secreted M14 and M19 metalloproteases) became dominant. Structural proteomics indicated that the surface of Novibacillus proteases has more negatively charged amino acid residues that help maintain protein stability at low pH. These findings aid understanding of the effects of sulfur metabolism on fermentation and the mechanism of microbial adaptation after pH reduction, providing new perspectives on the optimization of fermentation processes.

Fabrication of Ru/WO3-W2N/N-doped carbon sheets for hydrogen evolution reaction

Recent experimental analysis indicates WO₃-based nanostructures exhibit poor hydrogen evolution reactivity, particularly in alkaline medium, arising from the low electron transfer rate. It is imperative to tune the composition and structure of WO₃ to boost the cleavage of H-OH bond. Here, we construct Ru/WO₃-W₂N/N-doped carbon sheets (Ru/WO₃-W₂N/NC) using m-WO₃ nanosheets as precursors with the aid of RuCl₃, Tris (hydroxymethyl) aminomethane, and dopamine. Structural investigation reveals the formation of N-doped carbon sheets, Ru nanoparticles, and WO₃-W₂N. As a result, hydrogen evolution reactivity is greatly improved on Ru/WO₃-W₂N/N-doped carbon sheets with 64 mV at 10 mA/cm² in 1 mol/L (M) KOH, outperforming most of WO₃-based electrocatalysts in previous literatures. Meanwhile, it facilitates the generation of H₂ in 0.5 M H₂SO₄ with the excellent activity of 110 mV at 10 mA/cm². Our work provides an efficient strategy to tailor the electronic structure of WO₃ to catalyze acidic and alkaline hydrogen evolution reaction.

Review of NiS-Based Electrode Nanomaterials for Supercapacitors

As a new type of energy storage device, supercapacitors have the advantages of high-power densities, high safety factors, and low maintenance costs, so they have attracted widespread attention among researchers. However, a major problem with supercapacitors is that their energy densities are not high enough, which limits their application. Therefore, it is crucial to expand the application scenarios of supercapacitors to increase their energy density as much as possible without diminishing their advantages. The classification and working principles of supercapacitors are introduced in this paper. The electrochemical properties of pure NiS materials, NiS composites with carbon materials, NiS composites with sulfide materials, and NiS composites with transition metal oxides for supercapacitors are summarized. This paper may assist in the design of new electrode materials for NiS-based supercapacitors.

Design strategy for high-performance bifunctional electrode materials with heterogeneous structures formed by hydrothermal sulfur etching

The synthesis of efficient, stable, and green multifunctional electrode materials is a long-standing challenge for modern society in the field of energy storage and conversion. To this end, we successfully synthesized five bimetallic precursor materials with excellent performance by hydrothermal reaction with the assistance of a high concentration of polyvinylpyrrolidone (PVP), and then, sulfide etched the lamellar precursor materials among them to obtain the one-dimensional heterostructured samples. Benefiting from the synergistic effect of the bimetal and the continuous electron/ion transport structure, the samples displayed excellent bifunctional activity in supercapacitor and oxygen evolution reaction (OER). Regarding supercapacitors, the exceptional performance of 2817.2 F g^-1 at 1 A g^-1 was demonstrated, while the asymmetric supercapacitors made showed an extraordinary energy density of 150.2 Wh kg^-1 at a power density of 618.5 W kg^-1 and outstanding cycling performance (94.74% capacity retention after 20,000 cycles at 10 A g^-1). Simultaneously, a wearable flexible electrode that can be wrapped around a finger was coated on a carbon cloth and was found to light up a 0.5-m-long strip of light. Moreover, it exhibited an ultralow oxygen reduction overpotential of 249 mV at 10 mA cm^-2. Hence, our work provides a facile strategy to modulate the synthesis of heterogeneous structured sulfides with a continuous electron/ion transport pathway, which possesses excellent oxygen reduction electrocatalytic performance while meeting superior supercapacitor performance. Such work provides an effective approach for the construction of multifunctional electrochemical energy materials.